532 lines
17 KiB
C
532 lines
17 KiB
C
/*
|
||
Copyright 2011-19 Jun WAKO <wakojun@gmail.com>
|
||
Copyright 2013 Shay Green <gblargg@gmail.com>
|
||
|
||
This software is licensed with a Modified BSD License.
|
||
All of this is supposed to be Free Software, Open Source, DFSG-free,
|
||
GPL-compatible, and OK to use in both free and proprietary applications.
|
||
Additions and corrections to this file are welcome.
|
||
|
||
|
||
Redistribution and use in source and binary forms, with or without
|
||
modification, are permitted provided that the following conditions are met:
|
||
|
||
* Redistributions of source code must retain the above copyright
|
||
notice, this list of conditions and the following disclaimer.
|
||
|
||
* Redistributions in binary form must reproduce the above copyright
|
||
notice, this list of conditions and the following disclaimer in
|
||
the documentation and/or other materials provided with the
|
||
distribution.
|
||
|
||
* Neither the name of the copyright holders nor the names of
|
||
contributors may be used to endorse or promote products derived
|
||
from this software without specific prior written permission.
|
||
|
||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
||
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
POSSIBILITY OF SUCH DAMAGE.
|
||
*/
|
||
|
||
#include <stdbool.h>
|
||
#include <util/delay.h>
|
||
#include <avr/io.h>
|
||
#include <avr/interrupt.h>
|
||
#include "adb.h"
|
||
#include "print.h"
|
||
|
||
// GCC doesn't inline functions normally
|
||
#define data_lo() (ADB_DDR |= (1 << ADB_DATA_BIT))
|
||
#define data_hi() (ADB_DDR &= ~(1 << ADB_DATA_BIT))
|
||
#define data_in() (ADB_PIN & (1 << ADB_DATA_BIT))
|
||
|
||
#ifdef ADB_PSW_BIT
|
||
static inline void psw_lo(void);
|
||
static inline void psw_hi(void);
|
||
static inline bool psw_in(void);
|
||
#endif
|
||
|
||
static inline void attention(void);
|
||
static inline void place_bit0(void);
|
||
static inline void place_bit1(void);
|
||
static inline void send_byte(uint8_t data);
|
||
static inline uint16_t wait_data_lo(uint16_t us);
|
||
static inline uint16_t wait_data_hi(uint16_t us);
|
||
|
||
void adb_host_init(void) {
|
||
ADB_PORT &= ~(1 << ADB_DATA_BIT);
|
||
data_hi();
|
||
#ifdef ADB_PSW_BIT
|
||
psw_hi();
|
||
#endif
|
||
}
|
||
|
||
#ifdef ADB_PSW_BIT
|
||
bool adb_host_psw(void) { return psw_in(); }
|
||
#endif
|
||
|
||
/*
|
||
* Don't call this in a row without the delay, otherwise it makes some of poor controllers
|
||
* overloaded and misses strokes. Recommended interval is 12ms.
|
||
*
|
||
* Thanks a lot, blargg!
|
||
* <http://geekhack.org/index.php?topic=14290.msg1068919#msg1068919>
|
||
* <http://geekhack.org/index.php?topic=14290.msg1070139#msg1070139>
|
||
*/
|
||
uint16_t adb_host_kbd_recv(void) { return adb_host_talk(ADB_ADDR_KEYBOARD, ADB_REG_0); }
|
||
|
||
#ifdef ADB_MOUSE_ENABLE
|
||
uint16_t adb_host_mouse_recv(void) { return adb_host_talk(ADB_ADDR_MOUSE, ADB_REG_0); }
|
||
#endif
|
||
|
||
// This sends Talk command to read data from register and returns length of the data.
|
||
uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) {
|
||
for (int8_t i = 0; i < len; i++) buf[i] = 0;
|
||
|
||
cli();
|
||
attention();
|
||
send_byte((addr << 4) | ADB_CMD_TALK | reg);
|
||
place_bit0(); // Stopbit(0)
|
||
// TODO: Service Request(Srq):
|
||
// Device holds low part of comannd stopbit for 140-260us
|
||
//
|
||
// Command:
|
||
// ......._ ______________________ ___ ............_ -------
|
||
// | | | | | | |
|
||
// Command | | | | | Data bytes | |
|
||
// ........|___| | 140-260 |__| |_............|___|
|
||
// |stop0 | Tlt Stop-to-Start |start1| |stop0 |
|
||
//
|
||
// Command without data:
|
||
// ......._ __________________________
|
||
// | |
|
||
// Command | |
|
||
// ........|___| | 140-260 |
|
||
// |stop0 | Tlt Stop-to-Start |
|
||
//
|
||
// Service Request:
|
||
// ......._ ______ ___ ............_ -------
|
||
// | 140-260 | | | | | |
|
||
// Command | Service Request | | | | Data bytes | |
|
||
// ........|___________________| |__| |_............|___|
|
||
// |stop0 | |start1| |stop0 |
|
||
// ......._ __________
|
||
// | 140-260 |
|
||
// Command | Service Request |
|
||
// ........|___________________|
|
||
// |stop0 |
|
||
// This can be happened?
|
||
// ......._ ______________________ ___ ............_ -----
|
||
// | | | | | | 140-260 |
|
||
// Command | | | | | Data bytes | Service Request |
|
||
// ........|___| | 140-260 |__| |_............|_________________|
|
||
// |stop0 | Tlt Stop-to-Start |start1| |stop0 |
|
||
//
|
||
// "Service requests are issued by the devices during a very specific time at the
|
||
// end of the reception of the command packet.
|
||
// If a device in need of service issues a service request, it must do so within
|
||
// the 65 µs of the Stop Bit’s low time and maintain the line low for a total of 300 µs."
|
||
//
|
||
// "A device sends a Service Request signal by holding the bus low during the low
|
||
// portion of the stop bit of any command or data transaction. The device must lengthen
|
||
// the stop by a minimum of 140 J.lS beyond its normal duration, as shown in Figure 8-15."
|
||
// http://ww1.microchip.com/downloads/en/AppNotes/00591b.pdf
|
||
if (!wait_data_hi(500)) { // Service Request(310us Adjustable Keyboard): just ignored
|
||
xprintf("R");
|
||
sei();
|
||
return 0;
|
||
}
|
||
if (!wait_data_lo(500)) { // Tlt/Stop to Start(140-260us)
|
||
sei();
|
||
return 0; // No data from device(not error);
|
||
}
|
||
|
||
// start bit(1)
|
||
if (!wait_data_hi(40)) {
|
||
xprintf("S");
|
||
sei();
|
||
return 0;
|
||
}
|
||
if (!wait_data_lo(100)) {
|
||
xprintf("s");
|
||
sei();
|
||
return 0;
|
||
}
|
||
|
||
uint8_t n = 0; // bit count
|
||
do {
|
||
//
|
||
// |<- bit_cell_max(130) ->|
|
||
// | |<- lo ->|
|
||
// | | |<-hi->|
|
||
// _______
|
||
// | | |
|
||
// | 130-lo | lo-hi |
|
||
// |________| |
|
||
//
|
||
uint8_t lo = (uint8_t)wait_data_hi(130);
|
||
if (!lo) goto error; // no more bit or after stop bit
|
||
|
||
uint8_t hi = (uint8_t)wait_data_lo(lo);
|
||
if (!hi) goto error; // stop bit extedned by Srq?
|
||
|
||
if (n / 8 >= len) continue; // can't store in buf
|
||
|
||
buf[n / 8] <<= 1;
|
||
if ((130 - lo) < (lo - hi)) {
|
||
buf[n / 8] |= 1;
|
||
}
|
||
} while (++n);
|
||
|
||
error:
|
||
sei();
|
||
return n / 8;
|
||
}
|
||
|
||
uint16_t adb_host_talk(uint8_t addr, uint8_t reg) {
|
||
uint8_t len;
|
||
uint8_t buf[8];
|
||
len = adb_host_talk_buf(addr, reg, buf, 8);
|
||
if (len != 2) return 0;
|
||
return (buf[0] << 8 | buf[1]);
|
||
}
|
||
|
||
void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) {
|
||
cli();
|
||
attention();
|
||
send_byte((addr << 4) | ADB_CMD_LISTEN | reg);
|
||
place_bit0(); // Stopbit(0)
|
||
// TODO: Service Request
|
||
_delay_us(200); // Tlt/Stop to Start
|
||
place_bit1(); // Startbit(1)
|
||
for (int8_t i = 0; i < len; i++) {
|
||
send_byte(buf[i]);
|
||
// xprintf("%02X ", buf[i]);
|
||
}
|
||
place_bit0(); // Stopbit(0);
|
||
sei();
|
||
}
|
||
|
||
void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l) {
|
||
uint8_t buf[2] = {data_h, data_l};
|
||
adb_host_listen_buf(addr, reg, buf, 2);
|
||
}
|
||
|
||
void adb_host_flush(uint8_t addr) {
|
||
cli();
|
||
attention();
|
||
send_byte((addr << 4) | ADB_CMD_FLUSH);
|
||
place_bit0(); // Stopbit(0)
|
||
_delay_us(200); // Tlt/Stop to Start
|
||
sei();
|
||
}
|
||
|
||
// send state of LEDs
|
||
void adb_host_kbd_led(uint8_t led) {
|
||
// Listen Register2
|
||
// upper byte: not used
|
||
// lower byte: bit2=ScrollLock, bit1=CapsLock, bit0=NumLock
|
||
adb_host_listen(ADB_ADDR_KEYBOARD, ADB_REG_2, 0, led & 0x07);
|
||
}
|
||
|
||
#ifdef ADB_PSW_BIT
|
||
static inline void psw_lo(void) {
|
||
ADB_DDR |= (1 << ADB_PSW_BIT);
|
||
ADB_PORT &= ~(1 << ADB_PSW_BIT);
|
||
}
|
||
static inline void psw_hi(void) {
|
||
ADB_PORT |= (1 << ADB_PSW_BIT);
|
||
ADB_DDR &= ~(1 << ADB_PSW_BIT);
|
||
}
|
||
static inline bool psw_in(void) {
|
||
ADB_PORT |= (1 << ADB_PSW_BIT);
|
||
ADB_DDR &= ~(1 << ADB_PSW_BIT);
|
||
return ADB_PIN & (1 << ADB_PSW_BIT);
|
||
}
|
||
#endif
|
||
|
||
static inline void attention(void) {
|
||
data_lo();
|
||
_delay_us(800 - 35); // bit1 holds lo for 35 more
|
||
place_bit1();
|
||
}
|
||
|
||
static inline void place_bit0(void) {
|
||
data_lo();
|
||
_delay_us(65);
|
||
data_hi();
|
||
_delay_us(35);
|
||
}
|
||
|
||
static inline void place_bit1(void) {
|
||
data_lo();
|
||
_delay_us(35);
|
||
data_hi();
|
||
_delay_us(65);
|
||
}
|
||
|
||
static inline void send_byte(uint8_t data) {
|
||
for (int i = 0; i < 8; i++) {
|
||
if (data & (0x80 >> i))
|
||
place_bit1();
|
||
else
|
||
place_bit0();
|
||
}
|
||
}
|
||
|
||
// These are carefully coded to take 6 cycles of overhead.
|
||
// inline asm approach became too convoluted
|
||
static inline uint16_t wait_data_lo(uint16_t us) {
|
||
do {
|
||
if (!data_in()) break;
|
||
_delay_us(1 - (6 * 1000000.0 / F_CPU));
|
||
} while (--us);
|
||
return us;
|
||
}
|
||
|
||
static inline uint16_t wait_data_hi(uint16_t us) {
|
||
do {
|
||
if (data_in()) break;
|
||
_delay_us(1 - (6 * 1000000.0 / F_CPU));
|
||
} while (--us);
|
||
return us;
|
||
}
|
||
|
||
/*
|
||
ADB Protocol
|
||
============
|
||
|
||
Resources
|
||
---------
|
||
ADB - The Untold Story: Space Aliens Ate My Mouse
|
||
http://developer.apple.com/legacy/mac/library/#technotes/hw/hw_01.html
|
||
ADB Manager
|
||
http://developer.apple.com/legacy/mac/library/documentation/mac/pdf/Devices/ADB_Manager.pdf
|
||
Service request(5-17)
|
||
Apple IIgs Hardware Reference Second Edition [Chapter6 p121]
|
||
ftp://ftp.apple.asimov.net/pub/apple_II/documentation/Apple%20IIgs%20Hardware%20Reference.pdf
|
||
ADB Keycode
|
||
http://72.0.193.250/Documentation/macppc/adbkeycodes/
|
||
http://m0115.web.fc2.com/m0115.jpg
|
||
[Inside Macintosh volume V, pages 191-192]
|
||
http://www.opensource.apple.com/source/IOHIDFamily/IOHIDFamily-421.18.3/IOHIDFamily/Cosmo_USB2ADB.c
|
||
ADB Signaling
|
||
http://kbdbabel.sourceforge.net/doc/kbd_signaling_pcxt_ps2_adb.pdf
|
||
ADB Overview & History
|
||
http://en.wikipedia.org/wiki/Apple_Desktop_Bus
|
||
Microchip Application Note: ADB device(with code for PIC16C)
|
||
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1824&appnote=en011062
|
||
AVR ATtiny2131 ADB to PS/2 converter(Japanese)
|
||
http://hp.vector.co.jp/authors/VA000177/html/KeyBoardA5DEA5CBA5A2II.html
|
||
|
||
|
||
Pinouts
|
||
-------
|
||
ADB female socket from the front:
|
||
__________
|
||
| | <--- top
|
||
| 4o o3 |
|
||
|2o o1|
|
||
| == |
|
||
|________| <--- bottom
|
||
| | <--- 4pins
|
||
|
||
|
||
ADB female socket from bottom:
|
||
|
||
========== <--- front
|
||
| |
|
||
| |
|
||
|2o o1|
|
||
|4o o3|
|
||
---------- <--- back
|
||
|
||
1: Data
|
||
2: Power SW(low when press Power key)
|
||
3: Vcc(5V)
|
||
4: GND
|
||
|
||
|
||
Commands
|
||
--------
|
||
ADB command is 1byte and consists of 4bit-address, 2bit-command
|
||
type and 2bit-register. The commands are always sent by Host.
|
||
|
||
Command format:
|
||
7 6 5 4 3 2 1 0
|
||
| | | |------------ address
|
||
| |-------- command type
|
||
| |---- register
|
||
|
||
bits commands
|
||
------------------------------------------------------
|
||
- - - - 0 0 0 0 Send Reset(reset all devices)
|
||
A A A A 0 0 0 1 Flush(reset a device)
|
||
- - - - 0 0 1 0 Reserved
|
||
- - - - 0 0 1 1 Reserved
|
||
- - - - 0 1 - - Reserved
|
||
A A A A 1 0 R R Listen(write to a device)
|
||
A A A A 1 1 R R Talk(read from a device)
|
||
|
||
The command to read keycodes from keyboard is 0x2C which
|
||
consist of keyboard address 2 and Talk against register 0.
|
||
|
||
Address:
|
||
2: keyboard
|
||
3: mice
|
||
|
||
Registers:
|
||
0: application(keyboard uses this to store its data.)
|
||
1: application
|
||
2: application(keyboard uses this for LEDs and state of modifiers)
|
||
3: status and command
|
||
|
||
|
||
Communication
|
||
-------------
|
||
This is a minimum information for keyboard communication.
|
||
See "Resources" for detail.
|
||
|
||
Signaling:
|
||
|
||
~~~~____________~~||||||||||||__~~~~~_~~|||||||||||||||__~~~~
|
||
|
||
|800us | |7 Command 0| | | |15-64 Data 0|Stopbit(0)
|
||
+Attention | | | +Startbit(1)
|
||
+Startbit(1) | +Tlt(140-260us)
|
||
+stopbit(0)
|
||
|
||
Bit cells:
|
||
|
||
bit0: ______~~~
|
||
65 :35us
|
||
|
||
bit1: ___~~~~~~
|
||
35 :65us
|
||
|
||
bit0 low time: 60-70% of bit cell(42-91us)
|
||
bit1 low time: 30-40% of bit cell(21-52us)
|
||
bit cell time: 70-130us
|
||
[from Apple IIgs Hardware Reference Second Edition]
|
||
|
||
Criterion for bit0/1:
|
||
After 55us if line is low/high then bit is 0/1.
|
||
|
||
Attention & start bit:
|
||
Host asserts low in 560-1040us then places start bit(1).
|
||
|
||
Tlt(Stop to Start):
|
||
Bus stays high in 140-260us then device places start bit(1).
|
||
|
||
Global reset:
|
||
Host asserts low in 2.8-5.2ms. All devices are forced to reset.
|
||
|
||
Service request from device(Srq):
|
||
Device can request to send at commad(Global only?) stop bit.
|
||
Requesting device keeps low for 140-260us at stop bit of command.
|
||
|
||
|
||
Keyboard Data(Register0)
|
||
This 16bit data can contains two keycodes and two released flags.
|
||
First keycode is palced in upper byte. When one keyocode is sent,
|
||
lower byte is 0xFF.
|
||
Release flag is 1 when key is released.
|
||
|
||
1514 . . . . . 8 7 6 . . . . . 0
|
||
| | | | | | | | | +-+-+-+-+-+-+- Keycode2
|
||
| | | | | | | | +--------------- Released2(1 when the key is released)
|
||
| +-+-+-+-+-+-+----------------- Keycode1
|
||
+------------------------------- Released1(1 when the key is released)
|
||
|
||
Keycodes:
|
||
Scancode consists of 7bit keycode and 1bit release flag.
|
||
Device can send two keycodes at once. If just one keycode is sent
|
||
keycode1 contains it and keyocode2 is 0xFF.
|
||
|
||
Power switch:
|
||
You can read the state from PSW line(active low) however
|
||
the switch has a special scancode 0x7F7F, so you can
|
||
also read from Data line. It uses 0xFFFF for release scancode.
|
||
|
||
Keyboard LEDs & state of keys(Register2)
|
||
This register hold current state of three LEDs and nine keys.
|
||
The state of LEDs can be changed by sending Listen command.
|
||
|
||
1514 . . . . . . 7 6 5 . 3 2 1 0
|
||
| | | | | | | | | | | | | | | +- LED1(NumLock)
|
||
| | | | | | | | | | | | | | +--- LED2(CapsLock)
|
||
| | | | | | | | | | | | | +----- LED3(ScrollLock)
|
||
| | | | | | | | | | +-+-+------- Reserved
|
||
| | | | | | | | | +------------- ScrollLock
|
||
| | | | | | | | +--------------- NumLock
|
||
| | | | | | | +----------------- Apple/Command
|
||
| | | | | | +------------------- Option
|
||
| | | | | +--------------------- Shift
|
||
| | | | +----------------------- Control
|
||
| | | +------------------------- Reset/Power
|
||
| | +--------------------------- CapsLock
|
||
| +----------------------------- Delete
|
||
+------------------------------- Reserved
|
||
|
||
Address, Handler ID and bits(Register3)
|
||
1514131211 . . 8 7 . . . . . . 0
|
||
| | | | | | | | | | | | | | | |
|
||
| | | | | | | | +-+-+-+-+-+-+-+- Handler ID
|
||
| | | | +-+-+-+----------------- Address
|
||
| | | +------------------------- 0
|
||
| | +--------------------------- Service request enable(1 = enabled)
|
||
| +----------------------------- Exceptional event(alwyas 1 if not used)
|
||
+------------------------------- 0
|
||
|
||
ADB Bit Cells
|
||
bit cell time: 70-130us
|
||
low part of bit0: 60-70% of bit cell
|
||
low part of bit1: 30-40% of bit cell
|
||
|
||
bit cell time 70us 130us
|
||
--------------------------------------------
|
||
low part of bit0 42-49 78-91
|
||
high part of bit0 21-28 39-52
|
||
low part of bit1 21-28 39-52
|
||
high part of bit1 42-49 78-91
|
||
|
||
|
||
bit0:
|
||
70us bit cell:
|
||
____________~~~~~~
|
||
42-49 21-28
|
||
|
||
130us bit cell:
|
||
____________~~~~~~
|
||
78-91 39-52
|
||
|
||
bit1:
|
||
70us bit cell:
|
||
______~~~~~~~~~~~~
|
||
21-28 42-49
|
||
|
||
130us bit cell:
|
||
______~~~~~~~~~~~~
|
||
39-52 78-91
|
||
|
||
[from Apple IIgs Hardware Reference Second Edition]
|
||
|
||
Keyboard Handle ID
|
||
Apple Standard Keyboard M0116: 0x01
|
||
Apple Extended Keyboard M0115: 0x02
|
||
Apple Extended Keyboard II M3501: 0x02
|
||
Apple Adjustable Keybaord: 0x10
|
||
|
||
http://lxr.free-electrons.com/source/drivers/macintosh/adbhid.c?v=4.4#L802
|
||
|
||
END_OF_ADB
|
||
*/
|