g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/cannonkeys/ripple_hs
History
Ryan 5fda349018
Remove RGB keycodes from boards with no RGB config (#23709) 		2024-05-20 17:11:49 +10:00
..
keymaps Remove RGB keycodes from boards with no RGB config (#23709) 2024-05-20 17:11:49 +10:00
keyboard.json Migrate build target markers to keyboard.json - E (#23529) 2024-04-16 02:16:08 +01:00
readme.md Add Ripple TKL Hotswap Firmware (#20302) 2023-04-04 08:55:38 +10:00
rules.mk Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 2023-06-23 20:31:25 +01:00

readme.md

CannonKeys Ripple HS

Ripple Keyboard by Upas

  • Keyboard Maintainer: Andrew Kannan
  • Hardware Supported: STM32F072CBT6

Make example for this keyboard (after setting up your build environment):

make cannonkeys/ripple_hs:default

Flashing example for this keyboard:

make cannonkeys/ripple_hs:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top left key and plug in the keyboard
  • Physical reset button: Toggle the switch on the back of the pcb to "1" and briefly press the button on the back of the PCB
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available. In the pre-supplied keymaps it is on the second layer, replacing the R key.