WIP port to new firmware

Update daktil config for latest QMK
Add LUFA
2024-08-28 14:21:09 +02:00 · 2024-06-25 00:34:33 +02:00 · 2024-06-24 23:20:03 +02:00
30 changed files with 2088 additions and 725 deletions
--- a/.gitmodules
+++ b/.gitmodules
@ -25,3 +25,6 @@
 	path = lib/lvgl
 	url = https://github.com/qmk/lvgl.git
 	branch = release/v8.2
+[submodule "lufa"]
+	path = lib/lufa
+	url = https://github.com/qmk/lufa
--- a/keyboards/balthazar3/balthazar3.c
+++ b/keyboards/balthazar3/balthazar3.c
@ -0,0 +1,52 @@
+#include "balthazar3.h"
+
+/**
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    
+    //setPinInputHigh(E6);
+
+    matrix_init_user();
+}
+**/
+
+/**
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+
+    // set the whole port F as input pulled high
+    //DDRF &= ~(1<<2); 
+    //PORTF \|= (1<<2)
+
+    // enable Port F for input with pull ups activated
+    //DDRF = 0x00;
+    //PORTF = 0xff;
+
+    //noInterrupts();
+    // to set JTD -> disabling JTAG which may affect P:F4,F5,F7 - run this twice within 4 cycles
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+    //interrupts();
+
+    // By default, the JTAG debugging interface is disabled as soon as the keyboard starts up. 
+    // defined in tmk_core/common/keyboard.c as function disable_jtag
+    // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
+    //#if  (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega32U4__))
+    //    MCUCR |= _BV(JTD);
+    //    MCUCR |= _BV(JTD);
+    //#endif
+    
+    // disable adc	
+    ADCSRA = 0;
+
+    // The ATMega32u4 has an option to divide its clock speed, to conserve power. Like in the case of JTAG, this can be set or unset in fuses. 
+    // Thankfully, like in the JTAG case, we can disable this at run-time too, with the following magic words:
+    //CLKPR = (1 << CLKPCE);
+    //CLKPR = (0 << CLKPS3) | (0 << CLKPS2) | (0 << CLKPS1) | (0 << CLKPS0);
+
+    matrix_init_user();
+}
+**/
+
--- a/keyboards/balthazar3/balthazar3.h
+++ b/keyboards/balthazar3/balthazar3.h
@ -0,0 +1,45 @@
+/*
+BALTHAZAR 2020 Turbosavski
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* Layout moved to keyboard.json using the online converter: https://qmk.fm/converter/
+   More info: https://github.com/mechmerlin/qmk_setup/blob/master/info_json_tutorial.md */
+
+// 7x11 => diode dir = ROW2COL
+// we scan 7 rows       left half 1-7            right half 1-7
+// notation: K(col:01-11)(row:1-7)
+#define KEYMAP( \
+     K011, K012, K013, K014, K015, K016, K017,     K111, K112, K113, K114, K115, K116, K117, \
+    K031, K021, K022, K023, K024, K025, K026, K027, K101, K102, K103, K104, K105, K106, K107, \
+    K051, K041, K032, K033, K034, K035, K036, K037, K091, K092, K093, K094, K095, K096, K097, \
+    K061, K062, K042, K043, K044, K045, K046, K047, K081, K082, K083, K084, K085, K086, K087, \
+          K063, K052, K053, K054, K055, K056, K057, K071, K072, K073, K074, K075, K076, K077,  \
+    	     K064,                                                          K065, K066, K067 \
+) { \
+    { K011, K021, K031, K041, K051, K061, K071, K081, K091, K101, K111 }, \
+    { K012, K022, K032, K042, K052, K062, K072, K082, K092, K102, K112 }, \
+    { K013, K023, K033, K043, K053, K063, K073, K083, K093, K103, K113 }, \
+    { K014, K024, K034, K044, K054, K064, K074, K084, K094, K104, K114 }, \
+    { K015, K025, K035, K045, K055, K065, K075, K085, K095, K105, K115 }, \
+    { K016, K026, K036, K046, K056, K066, K076, K086, K096, K106, K116 }, \
+    { K017, K027, K037, K047, K057, K067, K077, K087, K097, K107, K117 }, \
+}
+
+#define LAYOUT KEYMAP
--- a/keyboards/balthazar3/config.h
+++ b/keyboards/balthazar3/config.h
@ -0,0 +1,249 @@
+/*
+BALTHAZAR 2020/21/22
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/*
+To use QMK keyboard on android or windows - use VID and PID from some more popular device - like Logitech G413.
+Hm, not ok
+                 VID          PID
+Logitech G413 -> 0x046D       0xC33A
+Logitech G815 -> 0x046D       0xC33F
+*/
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+#define NO_ACTION_TAPPING // disable tap dance and other tapping features
+#define NO_ACTION_ONESHOT // disable one-shot modifiers
+
+// we can define DIRECT_PINS or matrix DIODE_DIRECTION
+// they are mutually exclusive -> DIODE_DIRECTION denotes a matrix operation
+// 7x11 ROW2COL
+#define DIODE_DIRECTION ROW2COL
+
+// key matrix size: we are forking to left and right
+#define MATRIX_COLS 11	 // pulled-up cols are inputs (unselected) and outputs: selecting - low = selected row; input high = unselected row
+#define MATRIX_ROWS 7 //  pulled-up rows are inputs for reading - key pressed = low detected for selected col
+
+// selected COL pins are switched to output mode and to low; when unselected they are input mode pulled-up = high
+//#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D6, D4, D7, D5, D2, D3 } // these are ok
+#define MATRIX_COL_PINS { E2, C7, C6, B6, B5, B4, D7, D6, D4, B7, D3 } // these are ok
+
+// ROW pins are input pulled-up high pins; they are read according to the selected COL
+#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7, E6 }
+// port F is problematic? Port F4,F5,F7 are also for JTAG testing interface - PF7 on one board not ok
+// JTAG-capable MCUs come from the factory with the JTAGEN fuse set, and it takes over certain pins of the MCU that the board may be using for the switch matrix, LEDs, etc. - hfuse 0x99 (JTAG enabled) or 0xD9 (JTAG disabled)
+// By default, with QMK the JTAG debugging interface is disabled as soon as the keyboard starts up.
+// defined in tmk_core/common/keyboard.c as function disable_jtag
+// port F pins are tristated just after reset. If JTAG activated pullup on F7, F5, F4 will be active even on reset.
+// Port F pins now ok - pulled-up inputs - E6 can also be left pulled down -
+// NO: can this be because of conflict with QMK DFU bootloader //#define QMK_LED E6
+
+/**
+INT6/AIN0 – Port E, Bit 6
+INT6, External Interrupt source 6: The PE6 pin can serve as an external interrupt source.
+AIN0 – Analog Comparator Negative input. This pin is directly connected to the negative input of the Analog
+Comparator.
+• HWB – Port E, Bit 2
+HWB allows to execute the bootloader section after reset when tied to ground during external reset pulse. The
+HWB mode of this pin is active only when the HWBE fuse is enable. During normal operation (excluded Reset),
+this pin acts as a general purpose I/O.
+Overriding Signals for Alternate Functions PE6, PE2
+Signal Name PE6/INT6/AIN0     PE2/HWB
+PUOE          0                   0
+PUOV          0                   0
+DDOE          0                   0
+DDOV          0                   1
+PVOE          0                   0
+PVOV          0                   0
+DIEOE         INT6 ENABLE         0
+DIEOV         1                   0
+DI            INT6 INPUT*         HWB
+AIO           AIN0                INPUT*
+
+**/
+
+// Debounce reduces chatter (unintended double-presses) - default: 5; set 0 if debouncing is not needed
+#define DEBOUNCE 5
+
+// delay in microseconds when between changing matrix pin state and reading values
+// in matrix.c: just after select_col(current_col) and before reading rows for current_col
+#define MATRIX_IO_DELAY 30 //default 30; 100, 1000 is 1ms, 1000000 is 1s
+
+// sets the USB polling rate in milliseconds for the keyboard, mouse, and shared (NKRO/media keys) interfaces
+//#define USB_POLLING_INTERVAL_MS 10
+
+// sets the I2C clock rate speed for keyboards using I2C. The default is 400000L
+// we may use it for PSU module
+//#define F_SCL 100000L
+
+//#define PS2_MOUSE_SCROLL_BTN_MASK (1<<PS2_MOUSE_BTN_MIDDLE) // Default
+
+//#define DEBUG_MATRIX_SCAN_RATE   // we get 1200 Hz to 500 Hz
+
+/*
+ PB0 ISP ss - slave (SPI communication not used)
+ PB1 ISP sclk
+ PB2 ISP mosi
+ PB3 ISP miso
+
+ now PS/2:
+ PB1 ps/2 clock PCINT1
+ PB7 ps/2 data
+*/
+
+//#define LOCKING_SUPPORT_ENABLE
+// Locking resynchronize hack
+//#define LOCKING_RESYNC_ENABLE
+//#define BACKLIGHT_PIN B0 -> SS
+
+// PS2 trackpad
+/*https://docs.qmk.fm/#/feature_ps2_mouse*/
+/*
+trackpad without native buttons. A touch on trackpad changes the F6, F7 keys to left and right buttons
+*/
+
+#ifdef PS2_MOUSE_ENABLE
+
+// interrupt PS/2 touchpad
+// You can use any INT or PCINT pin for clock, and any pin for data.
+
+#ifdef PS2_USE_INT
+
+  #define PS2_CLOCK_PORT  PORTB //PORTD
+  #define PS2_CLOCK_PIN   PINB //PIND
+  #define PS2_CLOCK_DDR   DDRB //DDRD
+  #define PS2_CLOCK_BIT   1
+
+  #define PS2_DATA_PORT   PORTB //PORTD
+  #define PS2_DATA_PIN    PINB //PIND
+  #define PS2_DATA_DDR    DDRB //DDRD
+  #define PS2_DATA_BIT    7
+
+  #define PS2_INT_INIT()  do {    \
+    EICRA |= ((1<<ISC21) |      \
+              (0<<ISC20));      \
+  } while (0)
+  #define PS2_INT_ON()  do {      \
+    EIMSK |= (1<<INT2);         \
+  } while (0)
+  #define PS2_INT_OFF() do {      \
+    EIMSK &= ~(1<<INT2);        \
+  } while (0)
+  #define PS2_INT_VECT   INT2_vect
+
+#endif  // end  PS2_USE_INT
+
+
+// usart PS/2 touchpad - we use interrupt above
+
+#ifdef PS2_USE_USART
+  #define PS2_CLOCK_PORT  PORTD
+  #define PS2_CLOCK_PIN   D1
+  #define PS2_CLOCK_DDR   DDRD
+  #define PS2_CLOCK_BIT   5
+
+  #define PS2_DATA_PORT   PORTD
+  #define PS2_DATA_PIN    D2
+  #define PS2_DATA_DDR    DDRD
+  #define PS2_DATA_BIT    2
+
+  // synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge.
+  // Set DDR of CLOCK as input to be slave
+
+  #define PS2_USART_INIT() do {   \
+	    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
+	    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
+	    UCSR1C = ((1 << UMSEL10) |  \
+		      (3 << UPM10)   |  \
+		      (0 << USBS1)   |  \
+		      (3 << UCSZ10)  |  \
+		      (0 << UCPOL1));   \
+	    UCSR1A = 0;                 \
+	    UBRR1H = 0;                 \
+	    UBRR1L = 0;                 \
+	} while (0)
+
+	#define PS2_USART_RX_INT_ON() do {  \
+	    UCSR1B = ((1 << RXCIE1) |       \
+		      (1 << RXEN1));        \
+	} while (0)
+
+	#define PS2_USART_RX_POLL_ON() do { \
+	    UCSR1B = (1 << RXEN1);          \
+	} while (0)
+
+	#define PS2_USART_OFF() do {    \
+	    UCSR1C = 0;                 \
+	    UCSR1B &= ~((1 << RXEN1) |  \
+		        (1 << TXEN1));  \
+	} while (0)
+
+	#define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
+	#define PS2_USART_RX_DATA       UDR1
+	#define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
+	#define PS2_USART_RX_VECT       USART1_RX_vect
+
+#endif // end PS2_USE_USART
+
+// Additional mouse/ trackpad settings
+
+// Use remote mode instead of the default stream mode
+//#define PS2_MOUSE_USE_REMOTE_MODE
+
+// Enable the scrollwheel or scroll gesture on your mouse or touchpad
+#define PS2_MOUSE_ENABLE_SCROLLING
+// Some mice will need a scroll mask to be configured. The default is 0xFF
+//#define PS2_MOUSE_SCROLL_MASK 0x0F
+// Applies a transformation to the movement before sending to the host
+//#define PS2_MOUSE_USE_2_1_SCALING
+// The time to wait after initializing the ps2 host
+//#define PS2_MOUSE_INIT_DELAY 1000 // Default
+
+// The available buttons for (trackpoint) are:
+//#define PS2_MOUSE_BTN_LEFT      0
+//#define PS2_MOUSE_BTN_RIGHT     1
+//#define PS2_MOUSE_BTN_MIDDLE    2
+
+// we use trackpad without native buttons - use F6 (KC_F7), F7 (KC_F7) and 6 (KC_6) buttons
+// - once we sense movement on touchpad
+
+//Scroll Button
+//To disable the scroll button feature:
+//#define PS2_MOUSE_SCROLL_BTN_MASK 0
+
+//invert the X and Y axes:
+//#define PS2_MOUSE_INVERT_X
+//#define PS2_MOUSE_INVERT_Y
+
+//reverse the scroll axes:
+//#define PS2_MOUSE_INVERT_H
+//#define PS2_MOUSE_INVERT_V
+
+
+//Rotate Mouse Axes
+//Transform the output of the device with a clockwise rotation of 90, 180, or 270 degrees.
+//#define PS2_MOUSE_ROTATE 270 // Compensate for East-facing device orientation.
+//#define PS2_MOUSE_ROTATE 180 // Compensate for South-facing device orientation.
+//#define PS2_MOUSE_ROTATE 90 // Compensate for West-facing device orientation.
+
+#endif  // end PS2_MOUSE_ENABLE
+
+#define OLED_FONT_H "keymaps/toucholed/glcdfont.c"
--- a/keyboards/balthazar3/keyboard.json
+++ b/keyboards/balthazar3/keyboard.json
@ -0,0 +1,15 @@
+{
+    "keyboard_name": "Balthazar keyboard version 3",
+    "maintainer": "NXT",
+    "manufacturer": "BALTHAZAR",
+    "url": "https://balthazar.space/",
+    "usb": {
+        "vid": "0xFEED",
+        "pid": "0xBAFE",
+        "device_version": "0.0.3"
+    },
+    "description": "QMK_77KEYS",
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
+    "layout": "LAYOUT_balthazar3"
+}
--- a/keyboards/balthazar3/keymaps/default/keymap.c
+++ b/keyboards/balthazar3/keymaps/default/keymap.c
@ -0,0 +1,251 @@
+/*
+BALTHAZAR 2020-21 default
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+// debug -> CONSOLE_ENABLE yes // in rules.mk 
+
+/*
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // If console is enabled, it will print the matrix position and status of each key pressed
+#ifdef CONSOLE_ENABLE
+    //uprintf("KL: kc: 0x%04X, col: %u, row: %u, pressed: %b, time: %u, interrupt: %b, count: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed, record->event.time, record->tap.interrupted, record->tap.count);
+    if(record->event.pressed > 0) {
+	uprintf("KL: keycode: 0x%04X, col: %u, row: %u, pressed: %b\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
+    }	
+#endif 
+  return true;
+}
+*/
+
+/**
+void keyboard_post_init_user(void) {
+  // Customise these values to desired behaviour
+  //debug_enable=true;
+  //debug_matrix=true;
+  //debug_keyboard=true;
+  //debug_mouse=true;
+}
+**/
+
+
+/**
+we have left and right split to 7 active pins (rows)
+per each split row we have 11 cols to be read
+all 77 matrix nodes are used 
+we could add another row or rather col
+
+Programming usage is our focus:
+
+Esc is ok, Tab is ok
+ 
+Left Shift key is important - switches between:
+- numbers and  ¨ ! " # $ % & / ( ) = ? *
+- small letters and their capitals 
+- < and > ...
+
+Cap is of secondary importance
+
+Ctrl and Alt are ok
+
+GUI is important - switches between views
+
+Right Shift key (KC_RSFT) can be used for something else AltGr -> KC_RALT or KC_ROPT or KC_ALGR
+
+In the middle F6 and F7 act as mouse left and right buttons, 6 is middle button (scrolling) - above is touchpad 
+to the far left and right are loudspeakers
+
+   ┌──────┐                 ┌───────────┐                 ┌──────┐
+   │      │                 │           │                 │      │
+   │      │                 │           │                 │      │
+                            │           │		
+ *  rows are verticals      │           │
+ *    1   2   3   4   5   6 │ 7       1 │ 2   3   4   5   6   7
+ *  ┌───┬───┬───┬───┬───┬───┬───┐   ┌───┬───┬───┬───┬───┬───┬────┐
+ *  │Esc│F1 │F2 │F3 │F4 │F5 │F6 │   │F7 │F8 │F9 │F10│F11│F12│PScr│
+ * ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ * │ Tab│ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Del │
+ * ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ * │Shft│Cap│ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Back│
+ * ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ * │Ctrl│Alt│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │Entr│
+ *      ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ *      │GUI│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │UP │AltG│
+ *        ┌───┬───┐   ┌───┐                ┌───┐    ┌───┬───┬────┐
+ *        │Spc│Spc│   │Spc│                │Spc│    │LFT│DWN│RGHT│
+ *          space keys are four parallel keys
+ *
+ * 7x11 = 7 rows scanning + 11 cols reading
+ * 
+ * row 1 = Esc, Grave, Tab , Caps, Shift, Ctrl, N, J, U, 7, F1
+ * row 2 = F1,  1,     Q,   A,    Nubs,  Alt,  M, K, I, 8, F8
+ * etc.
+**/
+
+/* We have:
+ DIODE_DIRECTION ROW2COL
+ MATRIX_ROWS 7
+ MATRIX_COLS 11
+ COLS: Left to right, ROWS: Top to bottom
+
+ matrix.h says:
+ - according to number of cols (<8, <16 or <32) we create a binary 8 bit, 16 bit or 32 bit variable to hold all row values that were read 
+ - for each col - get all row values 
+ - col to row: Set row, read cols -> read_cols_on_row
+ - row to col: Set col, read rows -> read_rows_on_col
+ - matrix.c sets all row and col pins to pulled-up input mode, sets the selected active pin (set row or set col) as output low
+ - then reads the (read cols or rows) for 0 -> button pushed on that input pin -> pulled down via diode    
+ 
+ In my situation i wanted to have COL as active select/ unselect outputs with high as selected and reading ROWS inputs as normally LOW for HIGH state - the diodes face COL2ROW and additional resistors are there to pull down inputs. Now resistors are not needed.
+ If i changed the direction of diodes - all would be ok: 7 LOW scanning outputs would be as envisioned
+  
+ So i adapted to QMK: Our scanning output pins COLS become input reading pins ROWS and our input pins ROWS become scanning output pins COLS. We always have 7 input reading pins and 11 output scanning pins. 
+ - we can exchange definitions of COLS pins and ROWS pins and then define diode direction to COLS2ROWS  MATRIX_ROWS 11 MATRIX_COLS 7
+ - or keep it as now defined : diode direction ROWS2COLS MATRIX_ROWS 7 MATRIX_COLS 11
+ - in both we have 11 scanning outputs and 7 inputs to remember 
+ - if another set of keys needed i would add 8th input line with options for 11 more keys (88) 
+ - or 12th output line with option for 7 more keys (84)
+ - or have 8 x 10 = 80 - 3 more keys 
+ - but 7 x 11 = 77 is ideal
+*/
+
+
+// direct matrix description - without macro -> ROW2COL
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = { // 7x11 ISO
+          { KC_ESC, KC_GRV, KC_TAB,  KC_CAPS, KC_LSFT, KC_LCTL,  KC_N,    KC_J,    KC_U,    KC_7,    KC_F7 },    
+          { KC_F1,  KC_1,   KC_Q,    KC_A,    KC_NUBS, KC_LALT,  KC_M,    KC_K,    KC_I,    KC_8,    KC_F8 },
+          { KC_F2,  KC_2,   KC_W,    KC_S,    KC_Z,    KC_LGUI,  KC_COMM, KC_L,    KC_O,    KC_9,    KC_F9 }, 
+          { KC_F3,  KC_3,   KC_E,    KC_D,    KC_X,    KC_SPC,   KC_DOT,  KC_SCLN, KC_P,    KC_0,    KC_F10 },
+          { KC_F4,  KC_4,   KC_R,    KC_F,    KC_C,    KC_LEFT,  KC_SLSH, KC_QUOT, KC_LBRC, KC_MINS, KC_F11  }, 
+          { KC_F5,  KC_5,   KC_T,    KC_G,    KC_V,    KC_DOWN,  KC_UP,   KC_NUHS, KC_RBRC, KC_EQL,  KC_F12 },    
+          { KC_F6,  KC_6,   KC_Y,    KC_H,    KC_B,    KC_RIGHT, KC_ALGR, KC_ENT,  KC_BSPC, KC_DEL,  KC_PSCR  },
+  } 
+  
+ };
+
+/**
+// indirect with row and cols role reversed -> COL2ROW
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_all(
+    KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,   
+    KC_GRV,  KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, 
+    KC_TAB, KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,  KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, 
+    KC_CAPS, KC_A,  KC_S,  KC_D,  KC_F,  KC_G,  KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+    KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C,  KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_ALGR, 
+    KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+};
+**/
+
+/**
+
+AltGr (KC_ALGR) prints:
+~ @ [] \ | € { } § ł
+
+In addition, keycodes in the range of 0xA5-DF are reserved for internal use:
+Key 			Aliases 		Description
+KC_NO 			XXXXXXX 		Ignore this key (NOOP)
+KC_TRANSPARENT 	KC_TRNS, _______ 	Use the next lowest non-transparent key
+
+* DENOTES SELECTED
+
+Key 			Aliases 		Description
+*KC_ENTER 		KC_ENT 		Return (Enter)
+*KC_ESCAPE 		KC_ESC 		Escape
+*KC_BSPACE 		KC_BSPC 		Delete (Backspace)
+*KC_TAB 					Tab
+*KC_SPACE 		KC_SPC 		Spacebar
+*KC_MINUS 		KC_MINS 		- and _
+*KC_EQUAL 		KC_EQL 		= and +
+*KC_LBRACKET 		KC_LBRC 		[ and {
+*KC_RBRACKET 		KC_RBRC 		] and }
+KC_BSLASH 		KC_BSLS 		\ and |
+KC_NONUS_HASH 		KC_NUHS 		Non-US # and ~
+KC_SCOLON 		KC_SCLN 		; and :
+*KC_QUOTE 		KC_QUOT 		' and "
+*KC_GRAVE 		KC_GRV, KC_ZKHK 	` and ~, JIS Zenkaku/Hankaku
+*KC_COMMA 		KC_COMM 		, and <
+*KC_DOT 					. and >
+KC_SLASH 		KC_SLSH 		/ and ?
+KC_NONUS_BSLASH 	KC_NUBS 		Non-US \ and |
+
+Lock Keys
+Key 			Aliases 		Description
+*KC_CAPSLOCK 		KC_CLCK, KC_CAPS 	Caps Lock
+KC_SCROLLLOCK 		KC_SLCK, KC_BRMD 	Scroll Lock, Brightness Down (macOS)
+KC_NUMLOCK 		KC_NLCK 		Keypad Num Lock and Clear
+KC_LOCKING_CAPS 	KC_LCAP 		Locking Caps Lock
+KC_LOCKING_NUM 	KC_LNUM 		Locking Num Lock
+KC_LOCKING_SCROLL 	KC_LSCR 		Locking Scroll Lock
+
+Modifiers
+Key 			Aliases 		Description
+*KC_LCTRL 		KC_LCTL 		Left Control
+*KC_LSHIFT 		KC_LSFT 		Left Shift
+*KC_LALT 		KC_LOPT 		Left Alt (Option)
+*KC_LGUI 		KC_LCMD, KC_LWIN 	Left GUI (Windows/Command/Meta key)
+KC_RCTRL 		KC_RCTL 		Right Control
+KC_RSHIFT 		KC_RSFT 		Right Shift
+KC_RALT 		KC_ROPT, KC_ALGR 	Right Alt (Option/AltGr)
+KC_RGUI 		KC_RCMD, KC_RWIN 	Right GUI (Windows/Command/Meta key)
+
+Commands
+Key 			Aliases 			Description
+*KC_PSCREEN 		KC_PSCR 			Print Screen
+KC_PAUSE 		KC_PAUS, KC_BRK, KC_BRMU 	Pause, Brightness Up (macOS)
+KC_INSERT 		KC_INS 			Insert
+KC_HOME 						Home
+KC_PGUP 						Page Up
+*KC_DELETE 		KC_DEL 			Forward Delete
+KC_END 						End
+KC_PGDOWN 		KC_PGDN 			Page Down
+*KC_RIGHT 		KC_RGHT 			Right Arrow
+*KC_LEFT 						Left Arrow
+*KC_DOWN 						Down Arrow
+*KC_UP 						Up Arrow
+KC_APPLICATION 	KC_APP 			Application (Windows Context Menu Key)
+KC_POWER 		System Power
+KC_EXECUTE 		KC_EXEC 			Execute
+KC_HELP 						Help
+KC_MENU 						Menu
+KC_SELECT 		KC_SLCT 			Select
+KC_STOP 		Stop
+KC_AGAIN 		KC_AGIN		 	Again
+KC_UNDO 						Undo
+KC_CUT 						Cut
+KC_COPY 						Copy
+KC_PASTE 		KC_PSTE 			Paste
+KC_FIND 						Find
+KC__MUTE 						Mute
+KC__VOLUP 						Volume Up
+KC__VOLDOWN 						Volume Down
+KC_ALT_ERASE 		KC_ERAS 			Alternate Erase
+KC_SYSREQ 						SysReq/Attention
+KC_CANCEL 						Cancel
+KC_CLEAR 		KC_CLR			 	Clear
+KC_PRIOR 						Prior
+KC_RETURN 						Return
+KC_SEPARATOR 						Separator
+KC_OUT 						Out
+KC_OPER 						Oper
+KC_CLEAR_AGAIN 					Clear/Again
+KC_CRSEL 						CrSel/Props
+KC_EXSEL 						ExSel
+
+**/
+
--- a/keyboards/balthazar3/keymaps/default/readme.md
+++ b/keyboards/balthazar3/keymaps/default/readme.md
@ -0,0 +1 @@
+# The default keymap for BALTHAZAR
--- a/keyboards/balthazar3/keymaps/touch/keymap.c
+++ b/keyboards/balthazar3/keymaps/touch/keymap.c
@ -0,0 +1,159 @@
+/*
+BALTHAZAR 2020 turbo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+/*
+we have left and right split 7 cols
+per each split col we have 11 rows
+all 77 matrix nodes are used 
+we could add another row
+we could add another row or rather col
+
+Programming usage is our focus:
+
+Esc is ok, Tab is ok
+ 
+Left Shift key is important - switches between:
+- numbers and  ¨ ! " # $ % & / ( ) = ? *
+- small letters and their capitals 
+- < and > ...
+
+Cap is of secondary importance
+
+Ctrl and Alt are ok
+
+GUI is important - switches between views
+
+Right Shift key (KC_RSFT) can be used for something else AltGr -> KC_RALT or KC_ROPT or KC_ALGR
+
+In the middle F6 and F7 act as mouse left and right buttons - above is touchpad 
+to the far left and right are loudspeakers
+
+   ┌──────┐                 ┌───────────┐                 ┌──────┐
+   │      │                 │           │                 │      │
+   │      │                 │           │                 │      │
+                            │           │		
+ *  rows are verticals      │           │
+ *    1   2   3   4   5   6 │ 7       1 │ 2   3   4   5   6   7
+ *  ┌───┬───┬───┬───┬───┬───┬───┐   ┌───┬───┬───┬───┬───┬───┬────┐
+ *  │Esc│F1 │F2 │F3 │F4 │F5 │F6 │   │F7 │F8 │F9 │F10│F11│F12│PScr│
+ * ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ * │ Tab│ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Del │
+ * ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ * │Shft│Cap│ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Back│
+ * ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ * │Ctrl│Alt│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │Entr│
+ *      ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ *      │GUI│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │UP │AltG│
+ *        ┌───┬───┐   ┌───┐                ┌───┐    ┌───┬───┬────┐
+ *        │Spc│Spc│   │Spc│                │Spc│    │LFT│DWN│RGHT│
+ *          space keys are four parallel keys
+ *
+ * 7x11 = 7 rows scanning + 11 cols reading
+ * 
+ * row 1 = Esc, Grave, Tab, Caps, Shift, Ctrl, N, J, U, 7, F1
+ * row 2 = F1,  1,     Q,   A,    Nubs,  Alt,  M, K, I, 8, F8
+ * etc.
+ */
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = { // 7x11 ISO
+          { KC_ESC, KC_GRV, KC_TAB,  KC_CAPS, KC_LSFT, KC_LCTL,  KC_N,    KC_J,    KC_U,    KC_7,    KC_F7 },    
+          { KC_F1,  KC_1,   KC_Q,    KC_A,    KC_NUBS, KC_LALT,  KC_M,    KC_K,    KC_I,    KC_8,    KC_F8 },
+          { KC_F2,  KC_2,   KC_W,    KC_S,    KC_Z,    KC_LGUI,  KC_COMM, KC_L,    KC_O,    KC_9,    KC_F9 }, 
+          { KC_F3,  KC_3,   KC_E,    KC_D,    KC_X,    KC_SPC,   KC_DOT,  KC_SCLN, KC_P,    KC_0,    KC_F10 },
+          { KC_F4,  KC_4,   KC_R,    KC_F,    KC_C,    KC_LEFT,  KC_SLSH, KC_QUOT, KC_LBRC, KC_MINS, KC_F11  }, 
+          { KC_F5,  KC_5,   KC_T,    KC_G,    KC_V,    KC_DOWN,  KC_UP,   KC_NUHS, KC_RBRC, KC_EQL,  KC_F12 },    
+          { KC_F6,  KC_6,   KC_Y,    KC_H,    KC_B,    KC_RIGHT, KC_ALGR, KC_ENT,  KC_BSPC, KC_DEL,  KC_PSCR  },
+  },        
+  [1] = { // 7x11 ISO mouse layer
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MS_BTN2 },    
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, 
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, 
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },    
+       { KC_MS_BTN1, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  }, 
+   
+};
+
+// Movement Hook
+// Process mouse movement in the keymap before it is sent to the host. Example uses include filtering noise, adding acceleration, and automatically activating a layer. 
+void ps2_mouse_moved_user(report_mouse_t *mouse_report){
+	// here we have sensed the movement and need to activate layer index 1 
+	layer_on(1);
+}
+
+/*
+ * We want to have F6 and F7 keys become Left and Right trackpad (mouse) buttons when cursor movement detected
+ * number 6 KC_6 can be middle scrolling activator - when pushed and trackpad movement detected - scroll screen instead of cursor move 
+ * this is done with additional layer having so-called transparent keys everywhere but on the L anad R mouse keys  
+ * Valid ways to denote transparency on a given layer:
+    KC_TRANSPARENT
+    KC_TRNS (alias)
+    _______ (alias)
+    
+    KC_MS_BTN1 	KC_BTN1 	Mouse Button 1
+    KC_MS_BTN2 	KC_BTN2 	Mouse Button 2
+    KC_MS_BTN3 	KC_BTN3 	Mouse Button 3  // should be middle button
+**/
+
+/**    
+  Advanced option is keyboard as midi controller / step sequencer
+  https://docs.qmk.fm/#/feature_sequencer
+  
+  Add the following line to your rules.mk:
+  SEQUENCER_ENABLE = yes
+
+  By default the sequencer has 16 steps, but you can override this setting in your config.h:
+  #define SEQUENCER_STEPS 32
+
+Resolutions
+
+While the tempo defines the absolute speed at which the sequencer goes through the steps, the resolution defines the granularity of these steps (from coarser to finer).
+Resolution 	Description
+SQ_RES_2 	Every other beat
+SQ_RES_2T 	Every 1.5 beats
+SQ_RES_4 	Every beat
+SQ_RES_4T 	Three times per 2 beats
+SQ_RES_8 	Twice per beat
+SQ_RES_8T 	Three times per beat
+SQ_RES_16 	Four times per beat
+SQ_RES_16T 	Six times per beat
+SQ_RES_32 	Eight times per beat
+
+Keycodes
+Keycode 	Description
+SQ_ON 		Start the step sequencer
+SQ_OFF 	Stop the step sequencer
+SQ_TOG 	Toggle the step sequencer playback
+SQ_SALL 	Enable all the steps
+SQ_SCLR 	Disable all the steps
+SQ_S(n) 	Toggle the step n
+SQ_TMPD 	Decrease the tempo
+SQ_TMPU 	Increase the tempo
+SQ_R(n) 	Set the resolution to n
+SQ_RESD 	Change to the slower resolution
+SQ_RESU 	Change to the faster resolution
+SQ_T(n) 	Set n as the only active track or deactivate all  
+
+**/
+ 
+
--- a/keyboards/balthazar3/keymaps/touch/readme.md
+++ b/keyboards/balthazar3/keymaps/touch/readme.md
@ -0,0 +1 @@
+# The turbo keymap for BALTHAZAR
--- a/keyboards/balthazar3/keymaps/toucholed/config.h
+++ b/keyboards/balthazar3/keymaps/toucholed/config.h
@ -0,0 +1,19 @@
+/*
+Copyright 2024 g1smo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+//#define OLED_FONT_H "glcdfont.c"
--- a/keyboards/balthazar3/keymaps/toucholed/glcdfont.c
+++ b/keyboards/balthazar3/keymaps/toucholed/glcdfont.c
@ -0,0 +1,247 @@
+/*
+Copyright 2024 g1smo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Helidox 8x6 font with Balthazar logo
+
+#include "progmem.h"
+
+static unsigned char const font[] PROGMEM = {
+    0x07, 0x08, 0x7F, 0x08, 0x07, 0x00,
+    0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+    0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+    0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+    0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+    0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+    0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+    0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+    0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+    0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+    0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+    0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+    0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+    0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+    0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+    0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+    0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+    0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+    0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+    0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+    0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+    0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+    0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+    0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+    0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+    0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+    0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+    0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+    0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+    0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+    0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+    0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+    0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+    0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+    0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+    0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+    0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+    0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+    0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+    0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+    0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+    0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+    0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+    0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+    0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+    0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+    0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+    0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+    0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+    0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+    0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+    0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+    0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+    0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+    0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+    0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+    0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+    0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+    0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+    0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+    0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+    0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+    0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+    0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+    0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+    0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+    0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+    0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+    0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+    0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+    0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+    0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+    0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+    0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+    0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+    0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+    0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+    0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+    0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+    0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+    0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+    0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+    0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+    0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+    0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+    0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+    0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+    0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+    0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+    0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+    0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+    0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+    0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+    0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+    0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+    0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+    0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+    0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+    0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+    0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+    0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
+    0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+    0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+    0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+    0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+    0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+    0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+    0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+    0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+    0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
+    0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
+    0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+    0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+    0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+    0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+    0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+    0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+    0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+    0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+    0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+    0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+    0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+    0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+    0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+    0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x30, 0x78, 0x48, 0xD8, 0xF0,
+    0xE0, 0x84, 0x86, 0xFF, 0xFF, 0x86,
+    0x84, 0xC0, 0xF0, 0xD8, 0x48, 0x78,
+    0x30, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xE0, 0xF0, 0xF0,
+    0x30, 0x30, 0x30, 0x70, 0xE0, 0xC0,
+    0x00, 0x00, 0x00, 0x00, 0xC0, 0xF0,
+    0xF0, 0xF0, 0xC0, 0x00, 0x00, 0x00,
+    0x00, 0xE0, 0xF0, 0xE0, 0x00, 0x00,
+    0x00, 0x30, 0x30, 0x30, 0xF0, 0xF0,
+    0xF0, 0x30, 0x30, 0x30, 0x00, 0xF0,
+    0xF0, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0xE0, 0xF0, 0xF0, 0xE0,
+    0x80, 0x00, 0x00, 0x00, 0x30, 0x30,
+    0x30, 0x30, 0x30, 0xF0, 0xF0, 0x70,
+    0x00, 0x00, 0x00, 0x00, 0xE0, 0xF0,
+    0xF0, 0xE0, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0xF0, 0xF0, 0x30, 0x30, 0x30,
+    0x30, 0xE0, 0xE0, 0x80, 0x00, 0x00,
+    0x00, 0xC0, 0xF0, 0xF8, 0xFC, 0x3E,
+    0x1E, 0x06, 0x01, 0x00, 0x00, 0x00,
+    0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00,
+    0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00,
+    0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+    0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+    0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+    0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x08, 0x1C,
+    0x3E, 0x08, 0x08, 0x08, 0x88, 0xFF,
+    0xFF, 0xC9, 0xC9, 0xFF, 0xFF, 0xC9,
+    0xC9, 0xFF, 0xFF, 0x88, 0x08, 0x08,
+    0x08, 0x3E, 0x1C, 0x08, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
+    0x0C, 0x0C, 0x0C, 0x1E, 0xFF, 0xF1,
+    0x00, 0x00, 0xE0, 0xFE, 0x7F, 0x63,
+    0x60, 0x67, 0x7F, 0xFC, 0xE0, 0x00,
+    0x00, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
+    0xFF, 0x00, 0x00, 0x00, 0x00, 0xFF,
+    0xFF, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C,
+    0x0C, 0xFF, 0xFF, 0x00, 0x00, 0xC0,
+    0xF8, 0xFF, 0x6F, 0x61, 0x61, 0x6F,
+    0xFF, 0xF8, 0xC0, 0x00, 0x80, 0xE0,
+    0xF0, 0x3C, 0x0F, 0x07, 0x01, 0x00,
+    0x00, 0xC0, 0xF8, 0xFF, 0x6F, 0x60,
+    0x61, 0x6F, 0xFF, 0xF8, 0xC0, 0x00,
+    0x00, 0xFF, 0xFF, 0x0C, 0x08, 0x3C,
+    0xFC, 0xEF, 0x87, 0x03, 0x00, 0x00,
+    0x00, 0x03, 0x0F, 0x1F, 0x3F, 0x3C,
+    0x78, 0x70, 0x60, 0x00, 0x00, 0x00,
+    0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00,
+    0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00,
+    0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+    0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+    0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+    0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x06, 0x0F, 0x09, 0x0D, 0x07,
+    0x01, 0x10, 0x30, 0x7F, 0x7F, 0x30,
+    0x10, 0x01, 0x07, 0x0D, 0x09, 0x0F,
+    0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x03, 0x07, 0x07,
+    0x06, 0x06, 0x02, 0x03, 0x03, 0x01,
+    0x00, 0x03, 0x07, 0x01, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x03, 0x07, 0x02,
+    0x00, 0x03, 0x07, 0x07, 0x06, 0x06,
+    0x06, 0x06, 0x00, 0x00, 0x03, 0x07,
+    0x03, 0x00, 0x00, 0x00, 0x00, 0x03,
+    0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x03, 0x03, 0x00, 0x00, 0x07,
+    0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x03, 0x07, 0x02, 0x03, 0x07,
+    0x07, 0x06, 0x06, 0x06, 0x06, 0x02,
+    0x02, 0x07, 0x03, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x03, 0x07, 0x00,
+    0x00, 0x03, 0x03, 0x00, 0x00, 0x00,
+    0x00, 0x03, 0x07, 0x02, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
--- a/keyboards/balthazar3/keymaps/toucholed/keymap.c
+++ b/keyboards/balthazar3/keymaps/toucholed/keymap.c
@ -0,0 +1,189 @@
+/*
+BALTHAZAR 2020 turbo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "oled.c"
+
+/*
+we have left and right split 7 cols
+per each split col we have 11 rows
+all 77 matrix nodes are used
+we could add another row
+we could add another row or rather col
+
+Programming usage is our focus:
+
+Esc is ok, Tab is ok
+
+Left Shift key is important - switches between:
+- numbers and  ¨ ! " # $ % & / ( ) = ? *
+- small letters and their capitals
+- < and > ...
+
+Cap is of secondary importance
+
+Ctrl and Alt are ok
+
+GUI is important - switches between views
+
+Right Shift key (KC_RSFT) can be used for something else AltGr -> KC_RALT or KC_ROPT or KC_ALGR
+
+In the middle F6 and F7 act as mouse left and right buttons - above is touchpad
+to the far left and right are loudspeakers
+
+   ┌──────┐                 ┌───────────┐                 ┌──────┐
+   │      │                 │           │                 │      │
+   │      │                 │           │                 │      │
+                            │           │
+ *  rows are verticals      │           │
+ *    1   2   3   4   5   6 │ 7       1 │ 2   3   4   5   6   7
+ *  ┌───┬───┬───┬───┬───┬───┬───┐   ┌───┬───┬───┬───┬───┬───┬────┐
+ *  │Esc│F1 │F2 │F3 │F4 │F5 │F6 │   │F7 │F8 │F9 │F10│F11│F12│PScr│
+ * ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ * │ Tab│ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Del │
+ * ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ * │Shft│Cap│ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Back│
+ * ┌────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ * │Ctrl│Alt│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │Entr│
+ *      ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────┐
+ *      │GUI│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │UP │AltG│
+ *        ┌───┬───┐   ┌───┐                ┌───┐    ┌───┬───┬────┐
+ *        │Spc│Spc│   │Spc│                │Spc│    │LFT│DWN│RGHT│
+ *          space keys are four parallel keys
+ *
+ * 7x11 = 7 rows scanning + 11 cols reading
+ *
+ * row 1 = Esc, Grave, Tab, Caps, Shift, Ctrl, N, J, U, 7, F1
+ * row 2 = F1,  1,     Q,   A,    Nubs,  Alt,  M, K, I, 8, F8
+ * etc.
+ */
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = { // 7x11 ISO
+          { KC_ESC, KC_GRV, KC_TAB,  KC_CAPS, KC_LSFT, KC_LCTL,  KC_N,    KC_J,    KC_U,    KC_7,    KC_F7 },
+          { KC_F1,  KC_1,   KC_Q,    KC_A,    KC_NUBS, KC_LALT,  KC_M,    KC_K,    KC_I,    KC_8,    KC_F8 },
+          { KC_F2,  KC_2,   KC_W,    KC_S,    KC_Z,    KC_LGUI,  KC_COMM, KC_L,    KC_O,    KC_9,    KC_F9 },
+          { KC_F3,  KC_3,   KC_E,    KC_D,    KC_X,    KC_SPC,   KC_DOT,  KC_SCLN, KC_P,    KC_0,    KC_F10 },
+          { KC_F4,  KC_4,   KC_R,    KC_F,    KC_C,    KC_LEFT,  KC_SLSH, KC_QUOT, KC_LBRC, KC_MINS, KC_F11  },
+          { KC_F5,  KC_5,   KC_T,    KC_G,    KC_V,    KC_DOWN,  KC_UP,   KC_NUHS, KC_RBRC, KC_EQL,  KC_F12 },
+          { KC_F6,  KC_6,   KC_Y,    KC_H,    KC_B,    KC_RIGHT, KC_ALGR, KC_ENT,  KC_BSPC, KC_DEL,  KC_PSCR  },
+  },
+  [1] = { // 7x11 ISO mouse layer
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MS_BTN2 },
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+          { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+       { KC_MS_BTN1, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  },
+
+};
+
+// Movement Hook
+// Process mouse movement in the keymap before it is sent to the host. Example uses include filtering noise, adding acceleration, and automatically activating a layer.
+void ps2_mouse_moved_user(report_mouse_t *mouse_report){
+	// here we have sensed the movement and need to activate layer index 1
+	layer_on(1);
+}
+
+/*
+ * We want to have F6 and F7 keys become Left and Right trackpad (mouse) buttons when cursor movement detected
+ * number 6 KC_6 can be middle scrolling activator - when pushed and trackpad movement detected - scroll screen instead of cursor move
+ * this is done with additional layer having so-called transparent keys everywhere but on the L anad R mouse keys
+ * Valid ways to denote transparency on a given layer:
+    KC_TRANSPARENT
+    KC_TRNS (alias)
+    _______ (alias)
+
+    KC_MS_BTN1 	KC_BTN1 	Mouse Button 1
+    KC_MS_BTN2 	KC_BTN2 	Mouse Button 2
+    KC_MS_BTN3 	KC_BTN3 	Mouse Button 3  // should be middle button
+**/
+
+/**
+// oled - this assumes we have layers defined and named indirectly
+#ifdef OLED_ENABLE
+void oled_task_user(void) {
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+    // get_highest_layer should return indexes 0, 1, 2
+    switch (get_highest_layer(layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR("Default\n"), false);
+            break;
+        case _FN:
+            oled_write_P(PSTR("FN\n"), false);
+            break;
+        case _ADJ:
+            oled_write_P(PSTR("ADJ\n"), false);
+            break;
+        default:
+            // Or use the write_ln shortcut over adding '\n' to the end of your string
+            oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+#endif
+**/
+
+/**
+  Advanced option is keyboard as midi controller / step sequencer
+  https://docs.qmk.fm/#/feature_sequencer
+
+  Add the following line to your rules.mk:
+  SEQUENCER_ENABLE = yes
+
+  By default the sequencer has 16 steps, but you can override this setting in your config.h:
+  #define SEQUENCER_STEPS 32
+
+Resolutions
+
+While the tempo defines the absolute speed at which the sequencer goes through the steps, the resolution defines the granularity of these steps (from coarser to finer).
+Resolution 	Description
+SQ_RES_2 	Every other beat
+SQ_RES_2T 	Every 1.5 beats
+SQ_RES_4 	Every beat
+SQ_RES_4T 	Three times per 2 beats
+SQ_RES_8 	Twice per beat
+SQ_RES_8T 	Three times per beat
+SQ_RES_16 	Four times per beat
+SQ_RES_16T 	Six times per beat
+SQ_RES_32 	Eight times per beat
+
+Keycodes
+Keycode 	Description
+SQ_ON 		Start the step sequencer
+SQ_OFF 	Stop the step sequencer
+SQ_TOG 	Toggle the step sequencer playback
+SQ_SALL 	Enable all the steps
+SQ_SCLR 	Disable all the steps
+SQ_S(n) 	Toggle the step n
+SQ_TMPD 	Decrease the tempo
+SQ_TMPU 	Increase the tempo
+SQ_R(n) 	Set the resolution to n
+SQ_RESD 	Change to the slower resolution
+SQ_RESU 	Change to the faster resolution
+SQ_T(n) 	Set n as the only active track or deactivate all
+
+**/
--- a/keyboards/balthazar3/keymaps/toucholed/oled.c
+++ b/keyboards/balthazar3/keymaps/toucholed/oled.c
@ -0,0 +1,236 @@
+/*
+Copyright 2024 Jurij Podgoršek <jurij@kompot.si>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef OLED_ENABLE
+
+#define PASSWORD_MAX_LEN 128
+
+/*
+static void print_status(void) {
+     // Host Keyboard LED Status
+    led_t led_state = host_keyboard_led_state();
+    oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+    oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+    oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+}
+*/
+
+char entryBuffer[PASSWORD_MAX_LEN] = {};
+int entryBufferIndex = 0;
+
+// Print password (using * to conceal password)
+void printEntryBufferR(char replaceChar) {
+    for (int i = 0; i < sizeof entryBuffer; i++) {
+        if (entryBuffer[i] != '\0') {
+            if (replaceChar == '\0') {
+                oled_write_char(entryBuffer[i], false);
+            } else {
+                oled_write_char('*', false);
+            }
+        }
+    }
+}
+void printEntryBuffer(void) {
+    printEntryBufferR('\0');
+}
+
+void clearEntryBuffer(void) {
+    memset(entryBuffer, 0, sizeof entryBuffer);
+}
+
+// Show logo (in custom font)
+static void render_logo(void) {
+    static const char PROGMEM balthazar_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4,
+        0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00
+    };
+
+    oled_write_P(balthazar_logo, false);
+}
+
+// Possible states
+enum boot_state {
+    STATE_SPLASH = 0,
+    STATE_PASSWORD_SET = 10,
+    STATE_PASSWORD_SET_SUCCESS = 15,
+    STATE_PASSWORD_ENTER = 20,
+    STATE_PASSWORD_INVALID = 25,
+    STATE_BOOT_MENU = 30,
+    STATE_STARTING = 40
+};
+
+static uint16_t state_timer;
+enum boot_state current_state = STATE_SPLASH;
+
+oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
+    return rotation;
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    // Timer to show logo on start
+    state_timer = timer_read();
+
+    return rotation;
+}
+
+void progress_state(void) {
+    switch (current_state) {
+
+    case STATE_SPLASH:
+        oled_clear();
+        // @TODO check if pw set!
+        current_state = STATE_PASSWORD_SET;
+        break;
+
+    case STATE_PASSWORD_ENTER:
+        // @TODO Check if pw ok!
+        if (true) {
+            current_state = STATE_BOOT_MENU;
+        } else {
+            current_state = STATE_PASSWORD_INVALID;
+        }
+        break;
+
+    case STATE_PASSWORD_INVALID:
+        current_state = STATE_PASSWORD_ENTER;
+        break;
+
+    case STATE_PASSWORD_SET:
+        // @TODO save to EEPROM
+        oled_clear();
+        clearEntryBuffer();
+        current_state = STATE_PASSWORD_SET_SUCCESS;
+        break;
+
+    case STATE_PASSWORD_SET_SUCCESS:
+        //current_state = STATE_BOOT_MENU;
+        current_state = STATE_PASSWORD_SET;
+        break;
+
+    case STATE_BOOT_MENU:
+        current_state = STATE_STARTING;
+        break;
+    case STATE_STARTING:
+        // TODO actual boot!
+        break;
+    }
+    state_timer = timer_read();
+}
+
+const int TRANSITION_TIME = 3000;
+bool state_confirm = false;
+
+bool oled_task_user(void) {
+    switch (current_state) {
+
+    // Show splash for 3 seconds
+    case STATE_SPLASH:
+        render_logo();
+        oled_write_P(PSTR("Open hardware laptop"), false);
+        if (timer_elapsed(state_timer) > TRANSITION_TIME) {
+            progress_state();
+        }
+        break;
+
+    case STATE_PASSWORD_ENTER:
+        render_logo();
+        oled_write_ln_P(PSTR("Enter password:"), false);
+        // @TODO capture input, compare with EEPROM
+        break;
+
+    case STATE_PASSWORD_SET:
+        oled_write_ln_P(PSTR("No password found."), false);
+        oled_write_ln_P(PSTR("Set new password:"), false);
+        printEntryBufferR('*');
+        // @TODO capture input, save to EEPROM
+        break;
+
+    case STATE_PASSWORD_SET_SUCCESS:
+        //render_logo();
+        oled_clear();
+        oled_write_ln_P(PSTR("Password set success!"), false);
+        printEntryBuffer();
+
+        if (timer_elapsed(state_timer) > TRANSITION_TIME) {
+            progress_state();
+        }
+        break;
+
+    case STATE_PASSWORD_INVALID:
+        render_logo();
+        oled_write_P(PSTR("Invalid password. Try again"), false);
+
+        if (timer_elapsed(state_timer) > TRANSITION_TIME) {
+            progress_state();
+        }
+        break;
+
+    case STATE_BOOT_MENU:
+        if (state_confirm) {
+            oled_write_P(PSTR("Choose boot option:"), false);
+            // @TODO list options, keyboard selection
+            progress_state();
+        }
+        break;
+
+    case STATE_STARTING:
+        oled_write_P(PSTR("Starting up."), false);
+        if (timer_elapsed(state_timer) % 3000 > 1000) {
+            oled_write_P(PSTR("."), false);
+        }
+        if (timer_elapsed(state_timer) % 3000 > 2000) {
+            oled_write_P(PSTR("."), false);
+        }
+        break;
+    }
+
+    return false;
+}
+
+const char code_to_name[60] = {
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
+    'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
+    'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
+    '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
+    'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ',
+    ' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    // Capture input to buffer in certain states
+    if ((current_state == STATE_PASSWORD_ENTER
+         || current_state == STATE_PASSWORD_SET)
+        && record->event.pressed) {
+        // Backspace?
+        if (keycode == KC_BSPC && entryBufferIndex > 0) {
+            entryBuffer[entryBufferIndex] = '\0';
+            entryBufferIndex -= 1;
+        // Submit entry
+        } else if (keycode == KC_ENT || keycode == KC_T) {
+            progress_state();
+        // Save current character
+        } else if (keycode < 60) {
+            // @TODO broaden from lowercase chars and numbers
+            entryBuffer[entryBufferIndex] = code_to_name[keycode];
+            entryBufferIndex += 1;
+        }
+        return false;
+    }
+    return true;
+}
+
+#endif // end OLED_ENABLE
--- a/keyboards/balthazar3/keymaps/toucholed/readme.md
+++ b/keyboards/balthazar3/keymaps/toucholed/readme.md
@ -0,0 +1 @@
+# The turbo keymap for BALTHAZAR
--- a/keyboards/balthazar3/keymaps/toucholed/rules.mk
+++ b/keyboards/balthazar3/keymaps/toucholed/rules.mk
@ -0,0 +1 @@
+OLED_ENABLE = yes 		   # enable optional small i2c OLED 128x32 S
--- a/keyboards/balthazar3/readme.md
+++ b/keyboards/balthazar3/readme.md
@ -0,0 +1,22 @@
+# Balthazar
+
+Open-hardware laptop computer modules description and concept.
+
+These are electronic schematic modules as presented at https://balthazar.space/wiki/Balthazar with the main aim for team access. See the [main repository](https://github.com/balthazar-space/balthazar) for other designs.
+
+# Balthazar QMK firmware
+
+![balthazar](https://balthazar.space/wiki/Keyboard#/media/File:Key_solderedon.png)
+
+A customizable 80% keyboard.
+
+* Keyboard Maintainers: [Turbosavski](https://github.com/Turbosavski) & [g1smo](https://github.com/g1smo)
+* Hardware Supported: BALTHAZAR KEYBOARD
+* Hardware Availability: 
+
+Make example for this keyboard (after setting up your build environment):
+
+    make balthazar3:default
+    make balthazar3:turbo
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/balthazar3/rules.mk
+++ b/keyboards/balthazar3/rules.mk
@ -0,0 +1,67 @@
+# MCU name
+MCU = atmega32u4
+
+# defaults
+#F_CPU = 16000000
+#ARCH = AVR8
+#F_USB = $(F_CPU)
+#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+
+#BOOTLOADER = atmel-dfu
+BOOTLOADER = caterina
+# promicro
+#BOOTLOADER = lufa-dfu
+#QMK maintains a fork of the LUFA DFU bootloader that additionally performs a simple matrix scan for exiting the bootloader
+#and returning to the application, as well as flashing an LED/making a ticking noise
+#BOOTLOADER = qmk-dfu
+
+
+# Build Options
+#   change yes to no to disable
+
+PS2_MOUSE_ENABLE = no 		# use ps/2 touchpad - not yet
+MOUSEKEY_ENABLE = no        	# Mouse keys - we dont use buttons on mousepad, but on keyboard
+#To use USART on the ATMega32u4, you have to use PD5 for clock and PD2 for data.
+#If one of those are unavailable, you need to use interrupt version.
+#PS2_USE_INT = yes  		# first we us this one
+#PS2_USE_USART = yes		# later we will use this one
+
+MIDI_ENABLE = no            # MIDI support - might be usefull - need to declare keymap layer
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+EXTRAKEY_ENABLE = no        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+
+# optional small i2c OLED 128x64 (see toucholed keymap)
+OLED_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality / -> #define BACKLIGHT_PIN B7 in config.h
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+UNICODE_ENABLE = no         # Unicode - mabye?
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+#ISSI_ENABLE = yes	     # If the I2C pullup resistors aren't installed this must be disabled
+#WATCHDOG_ENABLE = yes	     # Resets keyboard if matrix_scan isn't run every 250ms
+
+#CUSTOM_MATRIX 		# Allows replacing the standard matrix scanning routine with a custom one.
+#DEBOUNCE_TYPE			# Allows replacing the standard key debouncing routine with an alternative or custom one.
+#WAIT_FOR_USB  = yes		#Forces the keyboard to wait for a USB connection to be established before it starts up
+#NO_USB_STARTUP_CHECK  = yes	#Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
+
+# Link time optimization
+LTO_ENABLE = yes
--- a/keyboards/handwired/daktil/config.h
+++ b/keyboards/handwired/daktil/config.h
@ -17,25 +17,22 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

-#ifndef DACTYL_CONFIG_H
-#define DACTYL_CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0x6660
-#define PRODUCT_ID      0xD571
-#define DEVICE_VER      0x0002
-#define MANUFACTURER    Ludamila
-#define PRODUCT         Daktil
-#define DESCRIPTION     Dober stukar. Vec: wiki.ljudmila.org
+#pragma once

 /* key matrix size
 * At this time, "row" in the dactyl's code actually means "column" on the
 * physical keyboard. It's confusing. I'm sorry. Blame Jack Humbert :P
 */
+#define DIODE_DIRECTION COL2ROW
 #define MATRIX_ROWS 12
 #define MATRIX_COLS 6
+#define COL_EXPANDED { false, false, false, false, false, false}
+#define MATRIX_ONBOARD_ROW_PINS { F6, F7, B1, B3, B2, B6 }
+#define MATRIX_ONBOARD_COL_PINS { D4, C6, D7, E6, B4, B5 }
+#define EXPANDER_COL_REGISTER GPIOA
+#define EXPANDER_ROW_REGISTER GPIOB
+#define MATRIX_EXPANDER_COL_PINS {0, 1, 2, 3, 4, 5}
+#define MATRIX_EXPANDER_ROW_PINS {0, 1, 2, 3, 4, 5}

 #define MOUSEKEY_INTERVAL     15
 #define MOUSEKEY_DELAY        0
@ -44,10 +41,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_WHEEL_MAX_SPEED 3
 #define MOUSEKEY_WHEEL_TIME_TO_MAX  40

-#define TAPPING_TOGGLE  1
-
 #define TAPPING_TERM    200
-#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)

 /* key combination for command */
 #define IS_COMMAND() ( \
@ -58,11 +52,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* fix space cadet rollover issue */
 #define DISABLE_SPACE_CADET_ROLLOVER

-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    15
-
-#define PREVENT_STUCK_MODIFIERS
-
 #define USB_MAX_POWER_CONSUMPTION 500

-#endif
+#define OLED_DISPLAY_64X128
+#define OLED_DISPLAY_HEIGHT 64
--- a/keyboards/handwired/daktil/daktil.c
+++ b/keyboards/handwired/daktil/daktil.c
@ -1,8 +1,8 @@
 #include "daktil.h"
-#include "i2cmaster.h"
+#include "i2c_master.h"


-bool i2c_initialized = 0;
+//bool i2c_initialized = 0;
 uint8_t mcp23018_status = 0x20;

 void matrix_init_kb(void) {
@ -25,15 +25,16 @@ void matrix_init_kb(void) {
    matrix_init_user();
 }

+/*
 uint8_t init_mcp23018(void) {
    mcp23018_status = 0x20;

    // I2C subsystem

-    if (i2c_initialized == 0) {
+    if (! i2c_initialized) {
        i2c_init();  // on pins D(1,0)
        i2c_initialized = true;
-        _delay_ms(1000);
+        wait_ms(1000);
    }

    // set pin direction
@ -60,6 +61,7 @@ out:

    return mcp23018_status;
 }
+*/

 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
--- a/keyboards/handwired/daktil/daktil.h
+++ b/keyboards/handwired/daktil/daktil.h
@ -1,10 +1,9 @@
-#ifndef DAKTIL_H
-#define DAKTIL_H
+#pragma once

 #include "quantum.h"
 #include <stdint.h>
 #include <stdbool.h>
-#include "i2cmaster.h"
+#include "i2c_master.h"
 #include <util/delay.h>

 #define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
@ -22,10 +21,12 @@
 #define GPIOB           0x13
 #define OLATA           0x14            // output latch register
 #define OLATB           0x15
+#define I2C_TIMEOUT     100

 extern uint8_t mcp23018_status;

 void init_dactyl(void);
+void init_expander(void);
 uint8_t init_mcp23018(void);

 #define KEYMAP(                                                 \
@ -68,5 +69,3 @@ uint8_t init_mcp23018(void);


 #define LAYOUT_dactyl KEYMAP
-
-#endif
--- a/keyboards/handwired/daktil/keyboard.json
+++ b/keyboards/handwired/daktil/keyboard.json
@ -0,0 +1,116 @@
+{
+    "keyboard_name": "Daktil",
+    "manufacturer": "Ludamila",
+    "url": "https://wiki.ljudmila.org/Tipkovnica_dactyl",
+    "maintainer": "qmk",
+    "usb": {
+        "vid": "0x6660",
+        "pid": "0xD571",
+        "device_version": "0.0.3"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
+    "features": {
+        "mousekey": true,
+        "extrakey": true,
+        "nkro": true,
+        "unicode": true,
+        "swap_hands": true,
+        "dynamic_macros": true
+    },
+    "debounce": 5,
+    "tapping": {
+        "toggle": 1
+    },
+    "layout_aliases": {
+        "LAYOUT_daktil": "LAYOUT"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [0, 0], "x": 0, "y": 0},
+                {"matrix": [0, 1], "x": 1, "y": 0},
+                {"matrix": [0, 2], "x": 2, "y": 0},
+                {"matrix": [0, 3], "x": 3, "y": 0},
+                {"matrix": [0, 4], "x": 4, "y": 0},
+                {"matrix": [0, 5], "x": 5, "y": 0},
+
+                {"matrix": [6, 0], "x": 11, "y": 0},
+                {"matrix": [6, 1], "x": 12, "y": 0},
+                {"matrix": [6, 2], "x": 13, "y": 0},
+                {"matrix": [6, 3], "x": 14, "y": 0},
+                {"matrix": [6, 4], "x": 15, "y": 0},
+                {"matrix": [6, 5], "x": 16, "y": 0},
+
+                {"matrix": [1, 0], "x": 0, "y": 1},
+                {"matrix": [1, 1], "x": 1, "y": 1},
+                {"matrix": [1, 2], "x": 2, "y": 1},
+                {"matrix": [1, 3], "x": 3, "y": 1},
+                {"matrix": [1, 4], "x": 4, "y": 1},
+                {"matrix": [1, 5], "x": 5, "y": 1},
+
+                {"matrix": [7, 0], "x": 11, "y": 1},
+                {"matrix": [7, 1], "x": 12, "y": 1},
+                {"matrix": [7, 2], "x": 13, "y": 1},
+                {"matrix": [7, 3], "x": 14, "y": 1},
+                {"matrix": [7, 4], "x": 15, "y": 1},
+                {"matrix": [7, 5], "x": 16, "y": 1},
+
+                {"matrix": [2, 0], "x": 0, "y": 2},
+                {"matrix": [2, 1], "x": 1, "y": 2},
+                {"matrix": [2, 2], "x": 2, "y": 2},
+                {"matrix": [2, 3], "x": 3, "y": 2},
+                {"matrix": [2, 4], "x": 4, "y": 2},
+                {"matrix": [2, 5], "x": 5, "y": 2},
+
+                {"matrix": [8, 0], "x": 11, "y": 2},
+                {"matrix": [8, 1], "x": 12, "y": 2},
+                {"matrix": [8, 2], "x": 13, "y": 2},
+                {"matrix": [8, 3], "x": 14, "y": 2},
+                {"matrix": [8, 4], "x": 15, "y": 2},
+                {"matrix": [8, 5], "x": 16, "y": 2},
+
+                {"matrix": [3, 0], "x": 0, "y": 3},
+                {"matrix": [3, 1], "x": 1, "y": 3},
+                {"matrix": [3, 2], "x": 2, "y": 3},
+                {"matrix": [3, 3], "x": 3, "y": 3},
+                {"matrix": [3, 4], "x": 4, "y": 3},
+                {"matrix": [3, 5], "x": 5, "y": 3},
+
+                {"matrix": [9, 0], "x": 11, "y": 3},
+                {"matrix": [9, 1], "x": 12, "y": 3},
+                {"matrix": [9, 2], "x": 13, "y": 3},
+                {"matrix": [9, 3], "x": 14, "y": 3},
+                {"matrix": [9, 4], "x": 15, "y": 3},
+                {"matrix": [9, 5], "x": 16, "y": 3},
+
+                {"matrix": [4, 2], "x": 2, "y": 4},
+                {"matrix": [4, 3], "x": 3, "y": 4},
+
+                {"matrix": [10, 2], "x": 13, "y": 4},
+                {"matrix": [10, 3], "x": 14, "y": 4},
+
+                {"matrix": [4, 4], "x": 4, "y": 5},
+                {"matrix": [4, 5], "x": 5, "y": 5},
+
+                {"matrix": [10, 0], "x": 11, "y": 5},
+                {"matrix": [10, 1], "x": 12, "y": 5},
+
+                {"matrix": [5, 4], "x": 6, "y": 6},
+                {"matrix": [5, 5], "x": 7, "y": 6},
+
+                {"matrix": [11, 0], "x": 9, "y": 6},
+                {"matrix": [11, 1], "x": 10, "y": 6},
+
+                {"matrix": [5, 2], "x": 6, "y": 7},
+                {"matrix": [5, 3], "x": 7, "y": 7},
+
+                {"matrix": [11, 2], "x": 9, "y": 7},
+                {"matrix": [11, 3], "x": 10, "y": 7}
+            ]
+        }
+    },
+    "macros": {
+
+    }
+}
--- a/keyboards/handwired/daktil/keymaps/default/keymap.c
+++ b/keyboards/handwired/daktil/keymaps/default/keymap.c
@ -42,15 +42,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        // left hand
    LALT(KC_LSFT),         KC_1,           KC_2,     KC_3,    KC_4,   KC_5,
  LT(TKTK,KC_EQL),         KC_Q,           KC_W,     KC_E,    KC_R,   KC_T,
-          KC_LSPO,         KC_A,           KC_S,     KC_D,    KC_F,   KC_G,
+          SC_LSPO,         KC_A,           KC_S,     KC_D,    KC_F,   KC_G,
  LT(SYMB,KC_GRV),  CTL_T(KC_Z),           KC_X,     KC_C,    KC_V,   KC_B,
-                                        KC_DELT,   KC_INS,  KC_SPC,KC_BSPC,
+                                         KC_DEL,   KC_INS,  KC_SPC,KC_BSPC,
                                            ALT_T(KC_APP),  LGUI_T(KC_ESC),
                                                   KC_END,         KC_HOME,
        // right hand
                             KC_6,   KC_7,     KC_8,     KC_9,               KC_0,         KC_MINS,
                             KC_Y,   KC_U,     KC_I,     KC_O,               KC_P,LT(TKTK,KC_BSLS),
-                             KC_H,   KC_J,     KC_K,     KC_L,  LT(MDIA, KC_SCLN),         KC_RSPC,
+                             KC_H,   KC_J,     KC_K,     KC_L,  LT(MDIA, KC_SCLN),         SC_RSPC,
                             KC_N,   KC_M,  KC_COMM,   KC_DOT,     CTL_T(KC_SLSH),LT(SYMB,KC_QUOT),
                           KC_TAB, KC_ENT,  KC_LBRC,  KC_RBRC,
                   LGUI_T(KC_ESC), KC_RALT,
@ -120,15 +120,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 // MEDIA AND MOUSE
 [MDIA] = LAYOUT_dactyl(
       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-         RESET,  KC_TRNS,  KC_WH_U,  KC_MS_U,  KC_WH_D,  KC_TRNS,
+       KC_TRNS,  KC_TRNS,  KC_WH_U,  KC_MS_U,  KC_WH_D,  KC_TRNS,
       KC_TRNS,  KC_TRNS,  KC_MS_L,  KC_MS_D,  KC_MS_R,  KC_TRNS,
       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
                           KC_TRNS,  KC_TRNS,  KC_BTN1,  KC_BTN2,
                                               KC_MPLY,  KC_BTN3,
                                               KC_MPRV,  KC_MNXT,
    // right hand
-                  RESET,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                  RESET,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_MPLY,
+                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_MPLY,
                KC_LEFT,  KC_DOWN,    KC_UP,  KC_RIGHT, KC_TRNS,  KC_MPLY,
                KC_TRNS,  KC_TRNS,  KC_MPRV,  KC_MNXT,  KC_TRNS,  KC_TRNS,
                KC_TRNS,  KC_TRNS,  KC_VOLD,  KC_VOLU,
@ -138,19 +138,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 // TK LAYER
 [TKTK] = LAYOUT_dactyl(
                       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                         RESET,  KC_TRNS,  KC_WH_U,  KC_MS_U,  KC_WH_D,  KC_TRNS,
+                       KC_TRNS,  KC_TRNS,  KC_WH_U,  KC_MS_U,  KC_WH_D,  KC_TRNS,
                       KC_TRNS,  KC_TRNS,  KC_MS_L,  KC_MS_D,  KC_MS_R,  KC_TRNS,
                       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                              KC_TRNS,  KC_TRNS, DYN_MACRO_PLAY1, DYN_REC_START1,
-                                                         KC_MPLY,   DYN_REC_STOP,
+                                           KC_TRNS,  KC_TRNS,  DM_PLY1,  DM_REC1,
+                                                               KC_MPLY,  DM_RSTP,
                                                               KC_MPRV,  KC_MNXT,
                       // right hand
-                       RESET,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                       RESET,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_MPLY,
+                       KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+                       KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_MPLY,
                       KC_LEFT, KC_DOWN,    KC_UP, KC_RIGHT,  KC_TRNS,  KC_MPLY,
                       KC_TRNS, KC_TRNS,  KC_MPRV,  KC_MNXT,  KC_TRNS,  KC_TRNS,
-                       DYN_REC_START2, DYN_MACRO_PLAY2,  KC_VOLD,  KC_VOLU,
-                       DYN_REC_STOP,  KC_MUTE,
+                       DM_REC2, DM_PLY2,  KC_VOLD,  KC_VOLU,
+                       DM_RSTP, KC_MUTE,
                       KC_TRNS, KC_TRNS
                       ),
 };
@ -159,6 +159,7 @@ const uint16_t PROGMEM fn_actions[] = {
    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
 };

+/* TODO add this back!
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
  // MACRODOWN only works in this function
@ -192,6 +193,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  }
  return true;
 }
+*/

 // Runs just one time when the keyboard initializes.
 void matrix_init_user(void) {
@ -201,3 +203,11 @@ void matrix_init_user(void) {

 // Runs constantly in the background, in a loop.
 void matrix_scan_user(void) {};
+
+#ifdef OLED_ENABLE
+bool oled_task_user(void) {
+    oled_write_P(PSTR("Keyboard:\n"), false);
+    oled_write_P(PSTR("BALTHAZAR"), false);
+    return false;
+}
+#endif
--- a/keyboards/handwired/daktil/keymaps/dvorak/keymap.c
+++ b/keyboards/handwired/daktil/keymaps/dvorak/keymap.c
@ -1,183 +0,0 @@
-#include "daktil.h"
-#include "debug.h"
-#include "action_layer.h"
-#include "version.h"
-
-#define BASE 0 // default layer
-#define SYMB 1 // symbols
-#define MDIA 2 // media keys
-
-enum custom_keycodes {
-  PLACEHOLDER = SAFE_RANGE, // ensure these codes start after the highest keycode defined in Quantum
-  VRSN,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Keymap 0: Basic layer
- *
- * ,-----------------------------------------.                    ,-----------------------------------------.
- * |   =  |   1  |   2  |   3  |   4  |   5  |                    |   6  |   7  |   8  |   9  |   0  |  -   |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * | Del  |  '"  |   ,  |   .  |   P  |   Y  |                    |   F  |   G  |   C  |   R  |   L  |  \   |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * | BkSp |   A  |   O  |   E  |   U  |   I  |                    |   D  |   H  |   T  |   N  | S/L2 |//Cmd |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |LShift|;/Ctrl|   Q  |   J  |   K  |   X  |                    |   B  |   M  |   W  |   V  |Z/Ctrl|RShift|
- * |------+------+------+------+------+------'                    `------+------+------+------+------+------|
- * |Grv/L1|   =  |AltShf| Left | Right|                                  |  Up  | Down |   [  |   ]  | ~L1  |
- * `----------------------------------'                                  `----------------------------------'
- *                                      ,-------------.  ,-------------.
- *                                      | App  | LGui |  | Alt  | ^/Esc|
- *                               ,------|------|------|  |------+------+------.
- *                               |      |      | Home |  | PgUp |      |      |
- *                               | Space|Backsp|------|  |------|  Tab |Enter |
- *                               |      |ace   | End  |  | PgDn |      |      |
- *                               `--------------------'  `--------------------'
- */
-[BASE] = LAYOUT_dactyl(  // layer 0 : default
-        // left hand
-           KC_EQL,            KC_1,           KC_2,     KC_3,     KC_4,  KC_5,
-          KC_DELT,         KC_QUOT,        KC_COMM,   KC_DOT,     KC_P,  KC_Y,
-          KC_BSPC,            KC_A,           KC_O,     KC_E,     KC_U,  KC_I,
-          KC_LSFT,  CTL_T(KC_SCLN),           KC_Q,     KC_J,     KC_K,  KC_X,
-  LT(SYMB,KC_GRV),          KC_EQL,  LALT(KC_LSFT),  KC_LEFT,  KC_RGHT,
-                                                                      ALT_T(KC_APP),  KC_LGUI,
-                                                                                      KC_HOME,
-                                                             KC_SPC,        KC_BSPC,   KC_END,
-        // right hand
-                             KC_6,   KC_7,     KC_8,     KC_9,            KC_0,         KC_MINS,
-                             KC_F,   KC_G,     KC_C,     KC_R,            KC_L,         KC_BSLS,
-                             KC_D,   KC_H,     KC_T,     KC_N,  LT(MDIA, KC_S),  GUI_T(KC_SLSH),
-                             KC_B,   KC_M,     KC_W,     KC_V,     CTL_T(KC_Z),         KC_RSFT,
-                                    KC_UP,  KC_DOWN,  KC_LBRC,         KC_RBRC,          KC_FN1,
-          KC_RALT,  CTL_T(KC_ESC),
-          KC_PGUP,
-          KC_PGDN, KC_TAB, KC_ENT
-    ),
-/* Keymap 1: Symbol Layer
- *
- * ,-----------------------------------------.                    ,-----------------------------------------.
- * |Versn |  F1  |  F2  |  F3  |  F4  |  F5  |                    |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |   !  |   @  |   {  |   }  |   |  |                    |  Up  |   7  |   8  |   9  |   *  |  F12 |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |   #  |   $  |   (  |   )  |   `  |                    | Down |   4  |   5  |   6  |   +  |      |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |   %  |   ^  |   [  |   ]  |   ~  |                    |   &  |   1  |   2  |   3  |   \  |      |
- * |------+------+------+------+------+------'                    `------+------+------+------+------+------|
- * |RESET |      |      |      |      |                                  |      |   .  |   0  |   =  |      |
- * `----------------------------------'                                  `----------------------------------'
- *                                      ,-------------.  ,-------------.
- *                                      |      |      |  |      |      |
- *                               ,------|------|------|  |------+------+------.
- *                               |      |      |      |  |      |      |      |
- *                               |      |      |------|  |------|      |      |
- *                               |      |      |      |  |      |      |      |
- *                               `--------------------'  `--------------------'
- */
-// SYMBOLS
-[SYMB] = LAYOUT_dactyl(
-       // left hand
-          VRSN,    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,
-       KC_TRNS,  KC_EXLM,    KC_AT,  KC_LCBR,  KC_RCBR,  KC_PIPE,
-       KC_TRNS,  KC_HASH,   KC_DLR,  KC_LPRN,  KC_RPRN,   KC_GRV,
-       KC_TRNS,  KC_PERC,  KC_CIRC,  KC_LBRC,  KC_RBRC,  KC_TILD,
-         RESET,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                                                         KC_TRNS,  KC_TRNS,
-                                                                   KC_TRNS,
-                                               KC_TRNS,  KC_TRNS,  KC_TRNS,
-       // right hand
-                KC_F6,      KC_F7,   KC_F8, KC_F9,  KC_F10,   KC_F11,
-                KC_UP,       KC_7,    KC_8,  KC_9, KC_ASTR,   KC_F12,
-                KC_DOWN,     KC_4,    KC_5,  KC_6, KC_PLUS,  KC_TRNS,
-                KC_AMPR,     KC_1,    KC_2,  KC_3, KC_BSLS,  KC_TRNS,
-                          KC_TRNS,  KC_DOT,  KC_0,  KC_EQL,  KC_TRNS,
-      KC_TRNS,  KC_TRNS,
-      KC_TRNS,
-      KC_TRNS,  KC_TRNS,  KC_TRNS
-),
-/* Keymap 2: Media and mouse keys
- * ,-----------------------------------------.                    ,-----------------------------------------.
- * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |      |      | MsUp |      |      |                    |      |      |      |      |      |      |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |      |MsLeft|MsDown|MsRght|      |                    |      |      |      |      |      | Play |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |      |      |      |      |      |                    |      |      | Prev | Next |      |      |
- * |------+------+------+------+------+------'                    `------+------+------+------+------+------|
- * |      |      |      | Lclk | Rclk |                                  | VolUp| VolDn| Mute |      |      |
- * `----------------------------------'                                  `----------------------------------'
- *                                      ,-------------.  ,-------------.
- *                                      |      |      |  |      |      |
- *                               ,------|------|------|  |------+------+------.
- *                               |      |      |      |  |      |      |Brwser|
- *                               |      |      |------|  |------|      |Back  |
- *                               |      |      |      |  |      |      |      |
- *                               `--------------------'  `--------------------'
- *
- */
-// MEDIA AND MOUSE
-[MDIA] = LAYOUT_dactyl(
-       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_MS_U,  KC_TRNS,  KC_TRNS,
-       KC_TRNS,  KC_TRNS,  KC_MS_L,  KC_MS_D,  KC_MS_R,  KC_TRNS,
-       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_BTN1,  KC_BTN2,
-                                                         KC_TRNS,  KC_TRNS,
-                                                                   KC_TRNS,
-                                               KC_TRNS,  KC_TRNS,  KC_TRNS,
-    // right hand
-                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_MPLY,
-                KC_TRNS,  KC_TRNS,  KC_MPRV,  KC_MNXT,  KC_TRNS,  KC_TRNS,
-                          KC_VOLU,  KC_VOLD,  KC_MUTE,  KC_TRNS,  KC_TRNS,
-      KC_TRNS,  KC_TRNS,
-      KC_TRNS,
-      KC_TRNS,  KC_TRNS,  KC_WBAK
-),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-  switch(id) {
-    case 0:
-      if (record->event.pressed) {
-        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
-      }
-      break;
-    case 1:
-      if (record->event.pressed) { // For resetting EEPROM
-        eeconfig_init();
-      }
-      break;
-  }
-  return MACRO_NONE;
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case VRSN:
-      if (record->event.pressed) {
-        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-
-};
-
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {};
--- a/keyboards/handwired/daktil/keymaps/dvorak/readme.md
+++ b/keyboards/handwired/daktil/keymaps/dvorak/readme.md
@ -1,9 +0,0 @@
-# Dactyl Dvorak keymap
-
-Modifiers and layers 1+ are the same as in the default layout.
-Only the layer-0 dvorak-relevant keys are different.
-
-## Changelog
-
-* Nov 2017:
-  * Copied and adapted from the default keymap.
--- a/keyboards/handwired/daktil/keymaps/erincalling/keymap.c
+++ b/keyboards/handwired/daktil/keymaps/erincalling/keymap.c
@ -1,162 +0,0 @@
-#include "daktil.h"
-#include "debug.h"
-#include "action_layer.h"
-#include "version.h"
-
-#define BASE 0 // default layer
-#define CONT 1 // control layer
-#define QWER 2 // qwerty layer
-
-enum custom_keycodes {
-  PLACEHOLDER = SAFE_RANGE, // ensure these codes start after the highest keycode defined in Quantum
-  COLON_EQ,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Keymap 0: Basic layer
- *
- * ,-----------------------------------------.                    ,-----------------------------------------.
- * | Esc  |   1  |   2  |   3  |   4  |   5  |                    |   6  |   7  |   8  |   9  |   0  |   \  |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * | Tab  |  '"  |   ,  |   .  |   P  |   Y  |                    |   F  |   G  |   C  |   R  |   L  |   /  |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |  :=  |   A  |   O  |   E  |   U  |   I  |                    |   D  |   H  |   T  |   N  |   S  |   -  |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |LShift|   ;  |   Q  |   J  |   K  |   X  |                    |   B  |   M  |   W  |   V  |   Z  |RShift|
- * |------+------+------+------+------+------'                    `------+------+------+------+------+------|
- * | Home |   `  |   =  | Left | Right|                                  |  Up  | Down |   [  |   ]  | End  |
- * `----------------------------------'                                  `----------------------------------'
- *                                      ,-------------.  ,-------------.
- *                                      | LCtl | LAlt |  | RCtl | Ralt |
- *                               ,------|------|------|  |------+------+------.
- *                               |      |      |  L1  |  |  L1  |      |      |
- *                               | Back |Delete|------|  |------|Enter |Space |
- *                               |Space |      | LGui |  | RGui |      |      |
- *                               `--------------------'  `--------------------'
- */
-[BASE] = LAYOUT_dactyl(  // layer 0 : default
-        // left hand
-    KC_ESC,     KC_1,     KC_2,     KC_3,     KC_4,      KC_5,
-    KC_TAB,  KC_QUOT,  KC_COMM,   KC_DOT,     KC_P,      KC_Y,
-  COLON_EQ,     KC_A,     KC_O,     KC_E,     KC_U,      KC_I,
-   KC_LSFT,  KC_SCLN,     KC_Q,     KC_J,     KC_K,      KC_X,
-   KC_HOME,   KC_GRV,   KC_EQL,  KC_LEFT,  KC_RGHT,
-                                                    KC_LCTRL,   KC_LALT,
-                                                               MO(CONT),
-                                          KC_BSPC,    KC_DEL,   KC_LGUI,
-        // right hand
-                       KC_6,     KC_7,      KC_8,     KC_9,     KC_0,  KC_BSLS,
-                       KC_F,     KC_G,      KC_C,     KC_R,     KC_L,  KC_SLSH,
-                       KC_D,     KC_H,      KC_T,     KC_N,     KC_S,  KC_MINS,
-                       KC_B,     KC_M,      KC_W,     KC_V,     KC_Z,  KC_RSFT,
-                                 KC_UP,  KC_DOWN,  KC_LBRC,  KC_RBRC,   KC_END,
-          KC_RALT,  KC_RCTL,
-         MO(CONT),
-          KC_RGUI,   KC_ENT,  KC_SPACE
-    ),
-/* Keymap 1: Control layer (media keys, Fkeys, numpad)
- *
- * ,-----------------------------------------.                    ,-----------------------------------------.
- * |      |  F1  |  F2  |  F3  |  F4  |  F5  |                    |  F6  |  F7  |  F8  |  F9  |  F10 | RESET|
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |      | Mute | VolD | VolU |      |                    |      |   7  |   8  |   9  |   +  |      |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |      | Prev |PPause| Next |      |                    |      |   4  |   5  |   6  |   =  |      |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |      |      |      |      |      |                    |      |   1  |   2  |   3  |   ,  |      |
- * |------+------+------+------+------+------'                    `------+------+------+------+------+------|
- * |PageUp|      |      |      |      |                                  |   0  |   0  |   .  |      |PageDn|
- * `----------------------------------'                                  `----------------------------------'
- *                                      ,-------------.  ,-------------.
- *                                      |      |      |  |      |      |
- *                               ,------|------|------|  |------+------+------.
- *                               |      |      |      |  |      |      |      |
- *                               |      |      |------|  |------|      |      |
- *                               |      |      |      |  |      |      |      |
- *                               `--------------------'  `--------------------'
- */
-// SYMBOLS
-[CONT] = LAYOUT_dactyl(
-       // left hand
-       KC_TRNS,    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,
-       KC_TRNS,  KC_TRNS,  KC_MUTE,  KC_VOLD,  KC_VOLU,  KC_TRNS,
-      TG(QWER),  KC_TRNS,  KC_MPRV,  KC_MPLY,  KC_MNXT,  KC_TRNS,
-       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-       KC_PGUP,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                                                         KC_TRNS,  KC_TRNS,
-                                                                   KC_TRNS,
-                                               KC_TRNS,  KC_TRNS,  KC_TRNS,
-       // right hand
-                KC_F6,      KC_F7,   KC_F8,   KC_F9,      KC_F10,    RESET,
-                KC_TRNS,     KC_7,    KC_8,    KC_9,  KC_KP_PLUS,  KC_TRNS,
-                KC_TRNS,     KC_4,    KC_5,    KC_6,      KC_EQL,  KC_TRNS,
-                KC_TRNS,     KC_1,    KC_2,    KC_3,     KC_COMM,  KC_TRNS,
-                             KC_0,    KC_0,  KC_DOT,     KC_TRNS,  KC_PGDN,
-      KC_TRNS,  KC_TRNS,
-      KC_TRNS,
-      KC_TRNS,  KC_TRNS,  KC_TRNS
-),
-/* Keymap 2: QWERTY overlay
- * ,-----------------------------------------.                    ,-----------------------------------------.
- * |      |      |      |      |      |      |                    |      |      |      |      |      |   [  |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |   Q  |   W  |   E  |   R  |   T  |                    |   Y  |   U  |   I  |   O  |   P  |   ]  |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |   A  |   S  |   D  |   F  |   G  |                    |   H  |   J  |   K  |   L  |   ;  |  '"  |
- * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |   Z  |   X  |   C  |   V  |   B  |                    |   N  |   M  |   ,  |   .  |   /  |      |
- * |------+------+------+------+------+------'                    `------+------+------+------+------+------|
- * |      |      |      |      |      |                                  |      |      |   -  |   \  |      |
- * `----------------------------------'                                  `----------------------------------'
- *                                      ,-------------.  ,-------------.
- *                                      |      |      |  |      |      |
- *                               ,------|------|------|  |------+------+------.
- *                               |      |      |      |  |      |      |      |
- *                               |      |      |------|  |------|      |      |
- *                               |      |      |      |  |      |      |      |
- *                               `--------------------'  `--------------------'
- *
- */
-// QWERTY
-[QWER] = LAYOUT_dactyl(
-       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-       KC_TRNS,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,
-       KC_TRNS,     KC_A,     KC_S,     KC_D,     KC_F,     KC_G,
-       KC_TRNS,     KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,
-       KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-                                                         KC_TRNS,  KC_TRNS,
-                                                                   KC_TRNS,
-                                               KC_TRNS,  KC_TRNS,  KC_TRNS,
-    // right hand
-                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_LBRC,
-                   KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,  KC_RBRC,
-                   KC_H,     KC_J,     KC_K,     KC_L,  KC_SCLN,  KC_QUOT,
-                   KC_N,     KC_M,  KC_COMM,   KC_DOT,  KC_SLSH,  KC_TRNS,
-                          KC_TRNS,  KC_TRNS,  KC_MINS,  KC_BSLS,  KC_TRNS,
-      KC_TRNS,  KC_TRNS,
-      KC_TRNS,
-      KC_TRNS,  KC_TRNS,  KC_TRNS
-),
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    switch(keycode) {
-      case COLON_EQ:
-        SEND_STRING(":=");
-        return false;
-        break;
-    }
-  }
-
-  return true;
-}
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-
-};
-
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {};
--- a/keyboards/handwired/daktil/keymaps/erincalling/readme.md
+++ b/keyboards/handwired/daktil/keymaps/erincalling/readme.md
@ -1,6 +0,0 @@
-# Erincalling Dactyl keymap
-
-## Changelog
-
-* Nov 2017:
-  * Ported and adapted from the ergodox-firmware layout I'd been using
--- a/keyboards/handwired/daktil/matrix.c
+++ b/keyboards/handwired/daktil/matrix.c
@ -1,5 +1,4 @@
 /*
-
 Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
 Copyright 2017 Erin Call <hello@erincall.com>

@ -16,10 +15,6 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-
-/*
- * scan matrix
- */
 #include <stdint.h>
 #include <stdbool.h>
 #include <avr/io.h>
@ -30,48 +25,58 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "daktil.h"
-#include "i2cmaster.h"
-#ifdef DEBUG_MATRIX_SCAN_RATE
+#include "i2c_master.h"
 #include "timer.h"
-#endif

-/*
- * This constant define not debouncing time in msecs, but amount of matrix
- * scan loops which should be made to get stable debounced results.
- *
- * On the Dactyl, the matrix scan rate is relatively low, because
- * communicating with the left hand's I/O expander is slower than simply
- * selecting local pins.
- * Now it's only 317 scans/second, or about 3.15 msec/scan.
- * According to Cherry specs, debouncing time is 5 msec.
- *
- * And so, there is no sense to have DEBOUNCE higher than 2.
- */
+
+/* Set 0 if debouncing isn't needed */

 #ifndef DEBOUNCE
 #   define DEBOUNCE 5
 #endif

+#if (DEBOUNCE > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t onboard_row_pins[MATRIX_ROWS] = MATRIX_ONBOARD_ROW_PINS;
+static const uint8_t onboard_col_pins[MATRIX_COLS] = MATRIX_ONBOARD_COL_PINS;
+static const bool col_expanded[MATRIX_COLS] = COL_EXPANDED;
+#endif
+
 /* matrix state(1:on, 0:off) */
 static matrix_row_t matrix[MATRIX_ROWS];

-// Debouncing: store for each key the number of scans until it's eligible to
-// change.  When scanning the matrix, ignore any changes in keys that have
-// already changed in the last DEBOUNCE scans.
-static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];

-static matrix_row_t read_cols(uint8_t row);
+#if (DIODE_DIRECTION == COL2ROW)
+    static const uint8_t expander_col_pins[MATRIX_COLS] = MATRIX_EXPANDER_COL_PINS;
    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
    static void unselect_rows(void);
    static void select_row(uint8_t row);
-
-static uint8_t mcp23018_reset_loop;
-
-#ifdef DEBUG_MATRIX_SCAN_RATE
-uint32_t matrix_timer;
-uint32_t matrix_scan_count;
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static const uint8_t expander_row_pins[MATRIX_ROWS] = MATRIX_EXPANDER_ROW_PINS;
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void select_col(uint8_t col);
+    static void unselect_col(uint8_t col);
 #endif

+static uint8_t expander_reset_loop;
+uint8_t mcp23018_status;
+uint8_t expander_input_pin_mask;
+bool i2c_initialized = false;
+
+#define ROW_SHIFTER ((matrix_row_t)1)

 __attribute__ ((weak))
 void matrix_init_user(void) {}
@ -103,80 +108,128 @@ uint8_t matrix_cols(void)

 void matrix_init(void)
 {
-    // initialize row and col
-
-    mcp23018_status = init_mcp23018();
-
+    init_expander();

+#if (DIODE_DIRECTION == COL2ROW)
    unselect_rows();
    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif

    // initialize matrix state: all keys off
    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
        matrix[i] = 0;
-        for (uint8_t j=0; j < MATRIX_COLS; ++j) {
-            debounce_matrix[i * MATRIX_COLS + j] = 0;
-        }
+        matrix_debouncing[i] = 0;
    }

-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
-    matrix_scan_count = 0;
-#endif
-
-    matrix_init_quantum();
-
+    matrix_init_kb();
 }

-void matrix_power_up(void) {
-    mcp23018_status = init_mcp23018();
-
-    unselect_rows();
-    init_cols();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
+void init_expander(void) {
+    if (! i2c_initialized) {
+        i2c_init();
+        wait_ms(1000);
    }

-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
-    matrix_scan_count = 0;
+    if (! expander_input_pin_mask) {
+#if (DIODE_DIRECTION == COL2ROW)
+        for (int col = 0; col < MATRIX_COLS; col++) {
+            if (col_expanded[col]) {
+                expander_input_pin_mask |= (1 << expander_col_pins[col]);
+            }
+        }
+#elif (DIODE_DIRECTION == ROW2COL)
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            expander_input_pin_mask |= (1 << expander_row_pins[row]);
+        }
 #endif
    }

-// Returns a matrix_row_t whose bits are set if the corresponding key should be
-// eligible to change in this scan.
-matrix_row_t debounce_mask(uint8_t row) {
-  matrix_row_t result = 0;
-  for (uint8_t j=0; j < MATRIX_COLS; ++j) {
-    if (debounce_matrix[row * MATRIX_COLS + j]) {
-      --debounce_matrix[row * MATRIX_COLS + j];
-    } else {
-      result |= (1 << j);
-    }
-  }
-  return result;
-}
+    /*
+    Pin direction and pull-up depends on both the diode direction
+    and on whether the column register is GPIOA or GPIOB
+    +-------+---------------+---------------+
+    |       | ROW2COL       | COL2ROW       |
+    +-------+---------------+---------------+
+    | GPIOA | input, output | output, input |
+    +-------+---------------+---------------+
+    | GPIOB | output, input | input, output |
+    +-------+---------------+---------------+
+    */

-// Report changed keys in the given row.  Resets the debounce countdowns
-// corresponding to each set bit in 'change' to DEBOUNCE.
-void debounce_report(matrix_row_t change, uint8_t row) {
-  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
-    if (change & (1 << i)) {
-      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
-    }
-  }
+#if (EXPANDER_COL_REGISTER == GPIOA)
+#   if (DIODE_DIRECTION == COL2ROW)
+    uint8_t direction[2] = {
+        expander_input_pin_mask,
+        0,
+    };
+#   elif (DIODE_DIRECTION == ROW2COL)
+    uint8_t direction[2] = {
+        0,
+        expander_input_pin_mask,
+    };
+#   endif
+#elif (EXPANDER_COL_REGISTER == GPIOB)
+#   if (DIODE_DIRECTION == COL2ROW)
+    uint8_t direction[2] = {
+        0,
+        expander_input_pin_mask,
+    };
+#   elif (DIODE_DIRECTION == ROW2COL)
+    uint8_t direction[2] = {
+        expander_input_pin_mask,
+        0,
+    };
+#   endif
+#endif
+
+    // set pull-up
+    // - unused  : off : 0
+    // - input   : on  : 1
+    // - driving : off : 0
+#if (EXPANDER_COL_REGISTER == GPIOA)
+#   if (DIODE_DIRECTION == COL2ROW)
+    uint8_t pullup[2] = {
+        expander_input_pin_mask,
+        0,
+    };
+#   elif (DIODE_DIRECTION == ROW2COL)
+    uint8_t pullup[2] = {
+        0,
+        expander_input_pin_mask,
+    };
+#   endif
+#elif (EXPANDER_COL_REGISTER == GPIOB)
+#   if (DIODE_DIRECTION == COL2ROW)
+    uint8_t pullup[2] = {
+        0,
+        expander_input_pin_mask,
+    };
+#   elif (DIODE_DIRECTION == ROW2COL)
+    uint8_t pullup[2] = {
+        expander_input_pin_mask,
+        0,
+    };
+#   endif
+#endif
+
+
+    mcp23018_status = i2c_write_register(I2C_ADDR, IODIRA, direction, 2, I2C_TIMEOUT);
+    if (mcp23018_status) return;
+
+    mcp23018_status = i2c_write_register(I2C_ADDR, GPPUA, pullup, 2, I2C_TIMEOUT);
 }

 uint8_t matrix_scan(void)
 {
    if (mcp23018_status) { // if there was an error
-        if (++mcp23018_reset_loop == 0) {
-            // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
+        if (++expander_reset_loop == 0) {
+            // since expander_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
            // this will be approx bit more frequent than once per second
-            print("trying to reset mcp23018\n");
-            mcp23018_status = init_mcp23018();
+            print("trying to reset expander\n");
+            init_expander();
            if (mcp23018_status) {
                print("left side not responding\n");
            } else {
@ -185,255 +238,265 @@ uint8_t matrix_scan(void)
        }
    }

-#ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_scan_count++;
+#if (DIODE_DIRECTION == COL2ROW)
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCE > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);

-    uint32_t timer_now = timer_read32();
-    if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
-        print("matrix scan frequency: ");
-        pdec(matrix_scan_count);
-        print("\n");
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCE > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+            read_rows_on_col(matrix, current_col);
+#       endif

-        matrix_timer = timer_now;
-        matrix_scan_count = 0;
    }
 #endif

+#   if (DEBOUNCE > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) {
            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        select_row(i);
-        wait_us(30);  // without this wait read unstable value.
-        matrix_row_t mask = debounce_mask(i);
-        matrix_row_t cols = (read_cols(i) & mask) | (matrix[i] & ~mask);
-        debounce_report(cols ^ matrix[i], i);
-        matrix[i] = cols;
-
-        unselect_rows();
+                matrix[i] = matrix_debouncing[i];
            }
+            debouncing = false;
+        }
+#   endif

-    matrix_scan_quantum();
-
+    matrix_scan_kb();
    return 1;
 }

-bool matrix_is_modified(void) // deprecated and evidently not called.
-{
-    return true;
-}
-
 inline
 bool matrix_is_on(uint8_t row, uint8_t col)
 {
-    return (matrix[row] & ((matrix_row_t)1<<col));
+    return (matrix[row] & (ROW_SHIFTER << col));
 }

 inline
 matrix_row_t matrix_get_row(uint8_t row)
 {
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
    return matrix[row];
+#endif
 }

 void matrix_print(void)
 {
    print("\nr/c 0123456789ABCDEF\n");
    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
+        print_hex8(row); print(": ");
+        print_bin_reverse16(matrix_get_row(row));
        print("\n");
    }
 }

-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void) {
+    for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+        if (! col_expanded[x]) {
+            uint8_t pin = onboard_col_pins[x];
+            _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+            _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
        }
-    return count;
-}
-
-/* Column pin configuration
- *
- * Teensy
- * col: 0   1   2   3   4   5
- * pin: F0  F1  F4  F5  F6  F7
- *
- * MCP23018
- * col: 0   1   2   3   4   5
- * pin: B5  B4  B3  B2  B1  B0
- */
-static void  init_cols(void)
-{
-    // init on mcp23018
-    // not needed, already done as part of init_mcp23018()
-
-    // init on teensy
-    // Input with pull-up(DDR:0, PORT:1)
-
-    // To je za stran vrec
-    //DDRF  &= ~(1<<7 | 1<<6 | 1<<5 | 1<<4 | 1<<1 | 1<<0);
-    //PORTF |=  (1<<7 | 1<<6 | 1<<5 | 1<<4 | 1<<1 | 1<<0);
-    // Cist mimo
-
-    DDRB &=  ~(1<<6 | 1<<3 | 1<<2 | 1<<1 );
-    PORTB |= (1<<6 | 1<<3 | 1<<2 | 1<<1 );
-    // Evo to je ze boljse
-
-    DDRF &= ~(1<<6 | 1<<7);
-    PORTF |= (1<<6 | 1<<7);
-
-}
-
-static matrix_row_t read_cols(uint8_t row)
-{
-    if (row < 6) {
-        if (mcp23018_status) { // if there was an error
-            return 0;
-        } else {
-            uint8_t data = 0;
-            mcp23018_status = i2c_start(I2C_ADDR_WRITE);    if (mcp23018_status) goto out;
-            mcp23018_status = i2c_write(GPIOB);             if (mcp23018_status) goto out;
-            mcp23018_status = i2c_start(I2C_ADDR_READ);     if (mcp23018_status) goto out;
-            data = i2c_readNak();
-            data = ~data;
-        out:
-            i2c_stop();
-            return data;
-        }
-    } else {
-        // read from teensy
-        return
-          /* OLOSH
-            (PINF&(1<<0) ? 0 : (1<<0)) |
-            (PINF&(1<<1) ? 0 : (1<<1)) |
-            (PINF&(1<<4) ? 0 : (1<<2)) |
-            (PINF&(1<<5) ? 0 : (1<<3)) |
-            (PINF&(1<<6) ? 0 : (1<<4)) |
-            (PINF&(1<<7) ? 0 : (1<<5)) ;
-
-          (PINB&(1<<6) ? 0 : (1<<0)) |
-          (PINB&(1<<2) ? 0 : (1<<1)) |
-          (PINB&(1<<3) ? 0 : (1<<2)) |
-          (PINB&(1<<1) ? 0 : (1<<3)) |
-          (PINF&(1<<7) ? 0 : (1<<4)) |
-          (PINF&(1<<6) ? 0 : (1<<5)) ;
-          */
-          (PINB&(1<<6) ? 0 : (1<<5)) |
-          (PINB&(1<<2) ? 0 : (1<<4)) |
-          (PINB&(1<<3) ? 0 : (1<<3)) |
-          (PINB&(1<<1) ? 0 : (1<<2)) |
-          (PINF&(1<<7) ? 0 : (1<<1)) |
-          (PINF&(1<<6) ? 0 : (1<<0)) ;
-
    }
 }

-/* Row pin configuration
- *
- * Micro Pro
- * row: 6   7   8   9   10  11
- * pin: B5  F4  E6  D7  C6  D4
- *
- * Teensy
- * row: 6   7   8   9   10  11
- * pin: B1  B2  B3  D2  D3  C6
- *
- * MCP23018
- * row: 0   1   2   3   4   5
- * pin: A0  A1  A2  A3  A4  A5
- */
-static void unselect_rows(void)
-{
-    // unselect on mcp23018
-    if (mcp23018_status) { // if there was an error
-        // do nothing
-    } else {
-        // set all rows hi-Z : 1
-        mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
-        mcp23018_status = i2c_write(GPIOA);          if (mcp23018_status) goto out;
-        mcp23018_status = i2c_write(0xFF);           if (mcp23018_status) goto out;
-    out:
-        i2c_stop();
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selection to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // Read columns from expander, unless it's in an error state
+    if (! mcp23018_status) {
+        uint8_t state = 0;
+        mcp23018_status = i2c_read_register(I2C_ADDR, EXPANDER_COL_REGISTER, &state, 1, I2C_TIMEOUT);
+        if (! mcp23018_status) {
+            current_matrix[current_row] |= (~state) & expander_input_pin_mask;
+        }
    }

-    // unselect on teensy
-    // Hi-Z(DDR:0, PORT:0) to unselect
-    /* spet mimo jojoj
-    DDRB  &= ~(1<<1 | 1<<2 | 1<<3);
-    PORTB &= ~(1<<1 | 1<<2 | 1<<3);
-    DDRD  &= ~(1<<2 | 1<<3);
-    PORTD &= ~(1<<2 | 1<<3);
-    DDRC  &= ~(1<<6);
-    PORTC &= ~(1<<6);
-    */
-    DDRB  &= ~(1<<5);
-    PORTB &= ~(1<<5);
-
-    DDRC  &= ~(1<<6);
-    PORTC &= ~(1<<6);
-
-    DDRD  &= ~(1<<4 | 1<<7);
-    PORTD &= ~(1<<4 | 1<<7);
-
-    DDRE  &= ~(1<<6);
-    PORTE &= ~(1<<6);
-
-    DDRF  &= ~(1<<4);
-    PORTF &= ~(1<<4);
+    // Read columns from onboard pins
+    for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+        if (! col_expanded[col_index]) {
+            uint8_t pin = onboard_col_pins[col_index];
+            uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+            current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
+        }
    }

-/* Row pin configuration
- *
- * Teensy
- * row: 6   7   8   9   10  11
- * pin: B1  B2  B3  D2  D3  C6
- *
- * MCP23018
- * row: 0   1   2   3   4   5
- * pin: A0  A1  A2  A3  A4  A5
- */
-static void select_row(uint8_t row)
-{
-    if (row < 6) {
-        // select on mcp23018
-        if (mcp23018_status) { // if there was an error
-            // do nothing
-        } else {
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row) {
+    // select on expander, unless it's in an error state
+    if (! mcp23018_status) {
        // set active row low  : 0
        // set other rows hi-Z : 1
-            mcp23018_status = i2c_start(I2C_ADDR_WRITE);   if (mcp23018_status) goto out;
-            mcp23018_status = i2c_write(GPIOA);            if (mcp23018_status) goto out;
-            mcp23018_status = i2c_write(0xFF & ~(1<<row)); if (mcp23018_status) goto out;
-        out:
-            i2c_stop();
+        uint8_t port = 0xFF & ~(1<<row);
+        mcp23018_status = i2c_write_register(I2C_ADDR, EXPANDER_ROW_REGISTER, &port, 1, I2C_TIMEOUT);
+    }
+
+    // select on teensy
+    uint8_t pin = onboard_row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    // No need to explicitly unselect expander pins--their I/O state is
+    // set simultaneously, with a single bitmask sent to i2c_write. When
+    // select_row selects a single pin, it implicitly unselects all the
+    // other ones.
+
+    // unselect on teensy
+    uint8_t pin = onboard_row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // LOW
+}
+
+static void unselect_rows(void) {
+    for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        unselect_row(x);
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = onboard_row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    uint8_t column_state = 0;
+
+    //select col and wait for selection to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    if (current_col < 6) {
+        // read rows from expander
+        if (mcp23018_status) {
+            // it's already in an error state; nothing we can do
+            return false;
+        }
+
+        mcp23018_status = i2c_read_register(I2C_ADDR, EXPANDER_ROW_REGISTER, &column_state, 1, I2C_TIMEOUT);
+
+        column_state = ~column_state;
+    } else {
+        for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+            if ((_SFR_IO8(onboard_row_pins[current_row] >> 4) & _BV(onboard_row_pins[current_row] & 0xF)) == 0) {
+                column_state |= (1 << current_row);
+            }
+        }
+    }
+
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[current_row];
+
+        if (column_state & (1 << current_row)) {
+            // key closed; set state bit in matrix
+            current_matrix[current_row] |= (ROW_SHIFTER << current_col);
+        } else {
+            // key open; clear state bit in matrix
+            current_matrix[current_row] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine whether the matrix changed state
+        if ((last_row_value != current_matrix[current_row]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    if (col_expanded[col]) {
+        // select on expander
+        if (mcp23018_status) { // if there was an error
+            // do nothing
+        } else {
+            // set active col low  : 0
+            // set other cols hi-Z : 1
+            uint8_t port = 0xFF & ~(1<<col);
+            mcp23018_status = i2c_write_register(I2C_ADDR, EXPANDER_COL_REGISTER, &port, 1, I2C_TIMEOUT);
        }
    } else {
        // select on teensy
-        // Output low(DDR:1, PORT:0) to select
-        switch (row) {
-            case 11:
-                DDRB  |= (1<<5);
-                PORTB &= ~(1<<5);
-                break;
-            case 10:
-                DDRF  |= (1<<4);
-                PORTF &= ~(1<<4);
-                break;
-            case 9:
-                DDRE  |= (1<<6);
-                PORTE &= ~(1<<6);
-                break;
-            case 8:
-                DDRD  |= (1<<7);
-                PORTD &= ~(1<<7);
-                break;
-            case 7:
-                DDRC  |= (1<<6);
-                PORTC &= ~(1<<6);
-                break;
-            case 6:
-                DDRD  |= (1<<4);
-                PORTD &= ~(1<<4);
-                break;
+        uint8_t pin = onboard_col_pins[col];
+        _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+        _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
    }
 }
+
+static void unselect_col(uint8_t col)
+{
+    if (col_expanded[col]) {
+        // No need to explicitly unselect expander pins--their I/O state is
+        // set simultaneously, with a single bitmask sent to i2c_write. When
+        // select_col selects a single pin, it implicitly unselects all the
+        // other ones.
+    } else {
+        // unselect on teensy
+        uint8_t pin = onboard_col_pins[col];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
    }
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        unselect_col(x);
+    }
+}
+#endif
+
+__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__((weak)) void matrix_init_user(void) {}
+
+__attribute__((weak)) void matrix_scan_user(void) {}
--- a/keyboards/handwired/daktil/rules.mk
+++ b/keyboards/handwired/daktil/rules.mk
@ -15,8 +15,9 @@
 #----------------------------------------------------------------------------

 # # project specific files
-SRC = twimaster.c \
+#SRC = twimaster.c \
 	  matrix.c
+src = matrix.c

 # MCU name
 MCU = atmega32u4
@ -64,26 +65,9 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   Atmel DFU loader 4096
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
+#OPT_DEFS += -DBOOTLOADER_SIZE=512

-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE        = no  # Virtual DIP switch configuration(+1000)
-MIDI_ENABLE             = no  # MIDI support (+2400 to 4200)
-POINTING_DEVICE_ENABLE  = no
-MOUSEKEY_ENABLE         = yes  # Mouse keys(+4700)
-EXTRAKEY_ENABLE         = yes # Audio control and System control(+450)
-CONSOLE_ENABLE          = no  # Console for debug(+8000)
-COMMAND_ENABLE          = no  # Commands for debug and configuration
-CUSTOM_MATRIX           = yes # Custom matrix file for the Dactyl
-NKRO_ENABLE             = yes # USB Nkey Rollover
-UNICODE_ENABLE          = yes # Unicode
-SWAP_HANDS_ENABLE       = yes # Allow swapping hands of keyboard
-SLEEP_LED_ENABLE        = no
-API_SYSEX_ENABLE        = no
-RGBLIGHT_ENABLE         = no
-
-# Fix za soft reest
-BOOTLOADER = caterina
+CUSTOM_MATRIX = yes
+OLED_ENABLE = yes
+OLED_DRIVER = ssd1306
+OLED_TRANSPORT = i2c
--- a/keyboards/handwired/daktil/twimaster.c
+++ b/keyboards/handwired/daktil/twimaster.c
@ -9,7 +9,7 @@
 #include <inttypes.h>
 #include <compat/twi.h>

-#include <i2cmaster.h>
+#include <i2c_master.h>

 /* define CPU frequency in Hz here if not defined in Makefile */
 #ifndef F_CPU
--- a/lib/lufa
+++ b/lib/lufa
@ -0,0 +1 @@
+Subproject commit 549b97320d515bfca2f95c145a67bd13be968faa
Author	SHA1	Message	Date
Jurij Podgoršek	7dc6605977	WIP port to new firmware	2024-08-28 14:21:09 +02:00
Jurij Podgoršek	a25b0f0778	Update daktil config for latest QMK	2024-06-25 00:34:33 +02:00
Jurij Podgoršek	109ea7b269	Add LUFA	2024-06-24 23:20:03 +02:00
				`@ -0,0 +1 @@`
				`OLED_ENABLE = yes # enable optional small i2c OLED 128x32 S`
				`@ -0,0 +1 @@`
				`Subproject commit 549b97320d515bfca2f95c145a67bd13be968faa`