Commit Graph

35 Commits (ff7470420a5634a3fedc052bf7dde0dcbd9af49b)

Author SHA1 Message Date
Nick Brassel 8545473307
Removes terminal from QMK. (#17258) 2022-05-30 22:38:08 -07:00
Joel Challis b7771ec25b
RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
Drashna Jaelre a68c4d8b81
[Keyboard] Update default keymaps for OLKB boards (#14565) 2021-09-23 20:08:23 +01:00
Drashna Jaelre 0bde920817
Convert Dip Switch callbacks to boolean functions (#13399) 2021-07-01 08:22:21 -07:00
nopjmp 050457818c
[Keymap] Fix Preonic rev3 default keymap (#12698)
The rev3 boards use RGBLIGHT_ENABLE now instead of BACKLIGHT_ENABLE.

This resolves the issue of flashing and losing functionality with the default keymap.
2021-06-19 19:20:50 -07:00
James Young 1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Ryan 6937f1d70e
Remove `MIDI_ENABLE_STRICT` from keyboards' config.h (#11679) 2021-01-27 17:26:26 +11:00
Damien 8ab6efdc80
Fix preonic layout documentation (#11655)
* [Apple M5120] First iteration

* Cleaned apple_m5120 files

* Changes requested by PR

* Update keyboards/apple_m5120/iso/rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/apple_m5120/iso/keymaps/default/keymap.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Updated Preonic default layout doc

* Removed non related files

Co-authored-by: dbroqua <dbroqua@mousur.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-24 14:57:22 +00:00
Brian Marsh 9c31a7adba
[Keymap] Add pezhore preonic keymap (#10269)
* Squashing commits - adding preonic keymap

This adds a custom keymap, including numpad layer, emoji, and kamoji
key mappings.

* Removing unnecessary trailing backslash characters

* removing the unnecessary json keymap

* removing unnecessary trailing slashes from the default keymap

* switching to tap_code

* Apply suggestions from code review

This should enable a toggleable numpad

* adding license

* Stripping out FN keycodes in favor of a momentary layer
2020-09-22 13:02:01 -07:00
fauxpark 97b8ade1aa [Keyboard] Use GPIO macros for E6 LED in Planck and Preonic default keymaps (#7098) 2019-10-20 22:38:22 -07:00
Michael Torres a9c1a5a873 remove accidental characters in default preonic keymap (#6748) 2019-09-16 14:13:44 +10:00
Drashna Jaelre 6c871408df
[Keyboard] Fix default keymaps for OLKB boards to play Startup Sound (#6721)
* Fix Planck default keymap to play sounds on rev6

The dip_switch_update callback was overriding the default startup sound.  This should prevent that from happening, and still allow it to play sounds, or stop them, when appropriate.

* Fix Preonic default keymap to play sounds on Rev 3

The dip_switch_update callback was overriding the default startup sound.  This should prevent that from happening, and still allow it to play sounds, or stop them, when appropriate.
2019-09-14 19:59:44 -07:00
Drashna Jaelre dab4967f1b
Add Dip Switch as a core feature (#6140)
* Add Dip Switches as a core feature

* Add documentation for Dip Switch feature

* Update Preonic Rev3 to use new feature and remove custom matrix

* Apply suggestions from code review

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Remove custom matrix line completely

Rather than just disabling it

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* DIP changes

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Use better check for DIP Switch configuration

* Add to show features

* Add bitmask callback for dip switch

* Fix OLKB Boards dip switch config

* Update docs to include bitmask example

* Fix comments/documentation

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Fix issues with docs and use example from @tuzonghua

* Fix wording

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Fix example to use proper formatting

Bad, BAAAAAAD drashna!!!

* Handle dip switch initialization better
2019-09-03 08:34:31 -07:00
Drashna Jaelre 0072fdd799 Cleanup Default Keymaps (#5442)
* Cleanup Default Keymaps to conform to QMK Firmware standards

* Minor fixes

* Revert some changes
2019-03-19 12:57:40 -07:00
adiron 80e733798a Fixed default Preonic keymap's encoder hadnling (#5067)
The function had the wrong name & arguments. This commit fixes this.
This in turn should also close issue #4997
2019-02-06 11:35:45 -08:00
Jack Humbert 1572375bfb adds support for preonic rev 3 2018-07-20 23:09:25 -04:00
Drashna Jaelre deb5a4b6a9 Convert all Preonic keymaps to layout format (#2644)
* Convert all Preonic keymaps to layout format

* Make sure preonic layouts are using QMK_KEYBOARD_H
2018-03-31 22:39:00 -04:00
Jack Humbert 607876187d shrink preonic by a bit 2017-11-14 21:23:26 -05:00
Jack Humbert ec3e065f0d
QMK DFU bootloader generation (#2009)
* adds :bootloader target

* update planck and preonic revisions

* remove references to .h files for planck

* update preonic keymap

* only add keyboard.h files that exist

* add production target

* hook things up with the new lufa variables

* update rules for planck/preonic

* back backlight key turn of status led when pressed

* add manufacturer/product strings to bootloader
2017-11-14 16:11:29 -05:00
Jack Humbert 791b9cc652 remove all makefiles from keyboard directories 2017-09-27 08:21:09 -10:00
skullydazed 4cdcbdb861 Remove all Makefiles from the keyboards directory. (#1660)
* Remove all Makefiles from the keyboards directory.

* update keymaps added in the last 8 days

* Ignore keyboard/keymap makefiles

* update hand_wire to reflect our new Makefile-less reality

* Update the make guide to reflect the new reality

* move planck keymap options to rules.mk

* update planck keymaps 4real

* trigger travis

* add back build_keyboard.mk

* restore changes to build_keyboard
2017-09-08 13:47:50 -04:00
Jack Humbert 415d38ba9e adds music mode, music mode songs, music mask 2017-07-23 14:59:29 -04:00
Jack Humbert f407f3e8de remove unneccesary headers 2017-07-23 14:59:29 -04:00
Jack Humbert 6a3c66776c clean-up planck and preonic keymaps, move audio stuff around 2017-07-23 14:59:29 -04:00
Nikolaus Wittenstein 8ddbf7f59f Fix spelling of "persistent"
Fixes #1201.
2017-05-11 15:32:35 -04:00
Gabriel Young a64ae10662 Update existing keymaps
Update existing keymaps to enable MIDI_BASIC functionality.  Also added
an option MIDI_ENABLE_STRICT to be strict about keycode use (which also
reduces memory footprint at runtime)
2017-02-25 20:41:13 -08:00
Jack Humbert 938422ce99 layer defines to enum 2017-01-25 10:02:01 -05:00
Jack Humbert 7edac212c8 separated into api files/folder 2016-11-26 15:38:44 -05:00
Robert Dale 9c26498f49 added Midi On/Off; Enter is actually transparent 2016-07-19 08:43:41 -04:00
Robert Dale 47223ebee4 Corrected the ascii layout to match the coded layout 2016-07-19 08:00:03 -04:00
Jack Humbert 94d3159d9d correct break/return order for planck and preonic defaults 2016-07-04 22:06:22 -04:00
Jack Humbert e5d1e4b8ce Preonic keymap update 2016-06-26 16:16:21 -04:00
Jack Humbert 0058c33815 updates preonic default layout 2016-06-26 14:20:57 -04:00
Jack Humbert 13bb6b4b7f Backlight abstraction and other changes (#439)
* redoes matrix pins, abstracts backlight code for B5,6,7

* slimming down keyboard stuff, backlight breathing implemented

* don't call backlight init when no pin

* cleans up user/kb/quantum calls, keyboard files

* fix pvc atomic

* replaces CHANNEL with correct var in breathing

* removes .hexs, updates readmes, updates template

* cleans-up clueboards, readmes to lowercase

* updates readme
2016-06-23 22:18:20 -04:00
Jack Humbert 649b33d778 Renames keyboard folder to keyboards, adds couple of tmk's fixes (#432)
* fixes from tmk's repo

* rename keyboard to keyboards
2016-06-21 22:39:54 -04:00