0ab51ee29d
Add support for large Mouse Reports ( #16371 )
...
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2022-06-08 18:39:16 -07:00
4d107feca9
Check for ongoing transfers on the OUT endpoint ( #16974 )
...
...when attempting to start a receiving USB transfer. Previously, we would
check on the IN endpoint which is the transmitting part of the USB endpoint.
This is wrong and lead to two USB transfers being started immediately
after each other in case of e.g. RAW HID endpoints:
1. When finishing an OUT transfer the low level USB driver calls the out_cb
callback, which in turn initiates another OUT transfer by calling
qmkusbDataReceived.
2. When the raw hid receive channel runs empty inside the raw_hid task,
another OUT transfer is started to potentially fill the channel again. This
happens by calling ibnotify.
Both events occur directly after each other, thus triggering the bug.
2022-05-14 23:17:14 +01:00
645359e5d0
Joystick: Simplify report descriptor and clean up error messages ( #16926 )
2022-04-26 08:54:34 +10:00
97f4a75fd7
[CI] Format code according to conventions ( #16914 )
2022-04-22 17:48:06 +10:00
e4942df397
Chibios USB protocol: allow overriding RAW Capacity ( #16339 )
2022-04-22 17:36:32 +10:00
bf67abb046
Fixed usb read loops not reading until timeout ( #16827 )
...
* the size variable was redeclared (hiding the variable of the outside scope) and therefore the while check was always false, so the compiler just removed the do while loop, but it would be better to read all data and only exit the task, after this is done
2022-04-10 00:27:02 +02:00
223bc47658
Merge remote-tracking branch 'origin/master' into develop
2022-03-19 17:41:15 +00:00
047ef3cd12
VUSB - Use correct endpoint poll for VIA ( #16691 )
2022-03-19 17:40:47 +00:00
921b9dad6c
[Core] Move `has_mouse_report_changed` function to `report.c` ( #16543 )
...
* Move 'has_mouse_report_changed' checkto report.c
* change mousekeys to use memcpy
* fix linting issues
2022-03-14 00:01:47 +00:00
7fb312ccd7
Fix use of ISSI driver config before init ( #16493 )
2022-03-03 22:35:51 +00:00
25ba9b41c1
Format code according to conventions ( #16421 )
2022-02-21 08:29:54 -08:00
63646e8906
Format code according to conventions ( #16322 )
2022-02-12 18:29:31 +00:00
f7e7671f69
Migrate more makefile utilities to builddefs sub-directory ( #16002 )
2022-02-10 09:45:51 -08:00
ae6f471f1c
Modify the output of the size checks. ( #16290 )
2022-02-10 08:50:55 +11:00
f1cd2a5a89
ChibiOS: add support for HID Programmable Buttons ( #15787 )
...
* ChibiOS: add support for HID Programmable Buttons
Fixes #15596
* Enable SHARED_ENDPOINT when PROGRAMMABLE_BUTTON is enabled
The Programmable Button driver expects the shared EP to be enabled.
So enforce this invariant.
2022-02-04 22:25:57 +00:00
7d685956cc
Rename `AdafruitBLE` to `BluefruitLE` ( #16127 )
2022-01-30 17:29:42 +00:00
5470e4a8ad
[Core] ChibiOS: shorten USB disconnect state on boot to 50ms ( #15805 )
2022-01-10 15:01:20 -08:00
6bc870d899
Refactor `bootloader_jump()` implementations ( #15450 )
...
* Refactor `bootloader_jump()` implementations
* Fix tests?
* Rename `atmel-samba` to `md-boot`
2021-12-27 21:10:07 +11:00
77d3e564f7
Migrate RN42 to UART driver and refactor ( #15492 )
2021-12-22 16:51:39 +11:00
9d7e64bcb3
Remove Deprecated USB Polling comment from vusb.c ( #15420 )
2021-12-07 19:57:33 +11:00
a83731660d
Merge remote-tracking branch 'origin/master' into develop
2021-11-30 05:54:51 +00:00
ed49dbeac4
Add missing virtser_init() to ChibiOS code ( #15356 )
2021-11-30 16:54:18 +11:00
b5a5bb6d74
Change default USB Polling rate to 1kHz ( #15352 )
2021-11-29 17:18:54 -08:00
ac00b6da29
[Bug] Fix timer include in override_wiring.c ( #15221 )
...
* [Bug] Fix timer include in override_wiring.c
* add platforms to keep parity with old method
2021-11-19 21:22:45 +00:00
2728603fe6
Move tmk_core/common/<plat> ( #13918 )
2021-11-19 10:41:02 -08:00
36d123e9c5
Add support for deferred executors. ( #14859 )
...
* Add support for deferred executors.
* More docs.
* Include from quantum.h
* Cleanup.
* Parameter checks
* Comments.
* qmk format-c
* I accidentally a few words.
* API name change.
* Apply suggestions from code review
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* Review comments.
* qmk format-c
* Review comments.
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
2021-11-15 18:21:09 +00:00
f3fa56c32a
gcc10 LTO - Only specify adhlns assembler options at link time ( #15115 )
...
* gcc10 LTO - Only specify adhlns assembler options at link time
* Default adhlns off?
2021-11-12 18:31:40 +11:00
5bb5bb1e28
Fix parallel builds w/ LTO on systems where make is not GNU make. ( #13955 )
2021-11-05 09:21:43 -07:00
5da04fb45b
Update to ChibiOS 20.3.4, support builds against trunk ( #14208 )
...
* Add support for building against ChibiOS svn/trunk.
* Swap to 21.6.x
* Update to latest branch revision as released version is broken.
* Updated configs.
* Conf updates.
* Updated ChibiOS
* Convert STM32L422 to actual L422 ChibiOS platform.
* Downgrade to 20.3.4 as ChibiOS 21.6.x is being aborted.
* Rollback L422-based boards.
2021-11-03 08:26:40 +11:00
387edab52b
Fixup #15029 ( #15031 )
2021-11-02 19:54:16 +00:00
634e42b2b4
Revert to old init order for host driver ( #15029 )
...
* Partially revert 14888
2021-11-02 18:53:46 +00:00
0ecd4926b2
Fix build failures caused by #12947 . ( #15019 )
...
* Fix build failures caused by #12947 . Unknown if this actually works.
* qmk format-c
2021-11-02 10:18:33 +00:00
76fb54403c
haptic: Feature to disable it when usb port is not configured or suspended. ( #12692 )
...
This also add support for specifying a LED pin to indicate haptic status,
and also adds support for a haptic-enable pin, which is useful to turn off
the boost converter on the solenoid driver.
2021-11-02 16:54:29 +11:00
7ae0f371cf
Add support to persist MD LED framework settings ( #14980 )
...
* Add support to persist MD LED framework settings
* avoid out-of-bounds errors when SmartEEPROM is not enabled
* Update brightness defaults
* clang
2021-11-02 09:45:30 +11:00
7f8faa429e
core: make the full 4096 bytes of EEPROM work on Teensy 3.6 ( #12947 )
...
This commit updates QMK’s copy of the the teensy3 Arduino core code with the
necessary changes to make the Teensy 3.6 work.
Aside from different values for the partitioning, HSRUN mode must be left
temporarily while using the EEPROM.
fixes https://github.com/kinx-project/kint/issues/8
related to https://github.com/kinx-project/kint/issues/10
2021-11-01 21:52:34 +00:00
92385e30cd
Manually format develop ( #15003 )
2021-11-01 19:18:33 +00:00
ee371c1295
Fix up issues shown by clang-format of vusb ( #15004 )
2021-11-01 18:57:37 +00:00
736d9fa538
Stop-gap forward-port Drop LED features for CTRL and ALT ( #14967 )
2021-10-29 13:11:48 -07:00
55fb468d74
More platform/protocol alignment ( #14976 )
2021-10-29 11:16:19 +01:00
dcfffa7b67
Relocate protocol files within tmk_core/common/ ( #14972 )
...
* Relocate non platform files within tmk_core/common/
* clang
2021-10-28 22:31:59 +01:00
0c87e2e702
Move LTO logic from common.mk ( #14973 )
2021-10-28 21:02:22 +01:00
780e763c13
Remove SERIAL_MOUSE ( #14969 )
2021-10-28 02:43:51 +01:00
2ec268bd21
Begin to carve out platform/protocol API - Migrate keyboard_* calls ( #14888 )
2021-10-24 20:39:41 +01:00
3b04425f1a
Merge remote-tracking branch 'origin/master' into develop
2021-10-23 04:04:47 +00:00
1953a968c5
Check usb transmit status in send_extra() ( #14643 )
2021-10-23 15:04:15 +11:00
0093d3d761
Initial USB2422 driver ( #14835 )
2021-10-22 00:49:58 +01:00
1b1f3ec68e
Split out arm_atsam shift register logic ( #14848 )
2021-10-22 00:49:38 +01:00
1b93d576f8
Fix ccache default ( #14906 )
2021-10-22 10:21:43 +11:00
b36e0c6658
Move USE_CCACHE logic to common location ( #14899 )
2021-10-21 14:39:13 +01:00
d4be4b67a2
Relocate PS2 code ( #14895 )
...
* Relocate ps2 protocol code
* clang
* Move makefile logic
2021-10-20 21:18:49 +01:00
Drashna Jaelre
Stefan Kerkmann
Ryan
QMK Bot
dexter93
Sascha
Joel Challis
Nick Brassel
Thomas Weißschuh
uqs
Purdea Andrei
Michael Stapelberg
just-another-jxliu
Dasky