Commit Graph

17 Commits (a24bdccee0580d1263733bc7e66e4e4f97713f19)

Author SHA1 Message Date
Takeshi ISHII b8c68afb2f
[Keyboard] Helix use `post_rules.mk` (#14216)
* Helix/pico use post_rules.mk insted of local_features.mk

Tested with the following procedure.
```
git checkout 77a93fec79 (qmk/develop)
make clean
make helix/pico:all:check-md5
make helix/pico/sc:all:check-md5
git checkout helix_use_post_rules.mk
make clean
make helix/pico:all:check-md5
make helix/pico/sc:all:check-md5
```

* Helix/rev2 use post_rules.mk

Tested with the following procedure.
```
git checkout 77a93fec79 (qmk/develop)
make clean
make helix/pico:all:check-md5
make helix/pico/sc:all:check-md5
make helix/rev2:all:check-md5
make helix/rev2/sc:all:check-md5
git checkout helix_use_post_rules.mk
make clean
make helix/pico:all:check-md5
make helix/pico/sc:all:check-md5
make helix/rev2:all:check-md5
make helix/rev2/sc:all:check-md5
```
2021-08-31 16:58:07 +09:00
Drashna Jaelre 92385b3fb6 Better handle LTO_ENABLE (#9832)
* Better handle LTO_ENABLE

Especially when calling from command line

* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE

* Remove long for LTO from show_options.mk
2020-08-29 14:30:02 -07:00
Ryan c9e3fa6f70
Clean up includes for glcdfont headers (#7745)
* Clean up includes for glcdfont headers

* Remove pragma once, most of these are not headers

* Missed these
2020-03-01 17:56:50 +11:00
MakotoKurauchi 881f27b461 [Keyboard] Cleanup helix rules options (#6952)
* add temporary test shell-spript

* Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization

No change in build result.

* Helix config.h use '#pragma once'

No change in build result.

* Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once'

No change in build result.

* Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h

No change in build result.

* remove keyboards/helix/{rev2|pico}/serial_config.h

No change in build result.

* 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h.

No change in build result.

* The contents of helix/rules.mk were distributed to subdirectories.

This is a preparation to create a new subdirectory for helix code using split_common.

No change in build result.

remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk.
follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk.

----
 SRC += i2c.c
 SRC += serial.c
 SRC += ssd1306.c

 CUSTOM_MATRIX = yes
---

* helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/

No change in build result.

* Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK.

No change in build result.

 * add keyboards/helix/pico/local_features.mk
 * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk
 * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk
 * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk
 * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk
 * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk

* Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK.

No change in build result.

* add keyboards/helix/rev2/local_features.mk
* add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk
* remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk
* remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk
* remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk
* add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk

* Added helix keyboard build NEW method.

No change in build result.

 ## Helix build
 $ make helix:default            ## no oled, no backlight, no underglow
 $ make helix/rev2/back:default  ## no oled, with backlight, no underglow
 $ make helix/rev2/under:default ## no oled, no backlight, with underglow
 $ make helix/rev2/oled:default  ## with oled, no backlight, not underglow
 $ make helix/rev2/oled/back:default  ## with oled, with backlight, no underglow
 $ make helix/rev2/back/oled:default  ## with oled, with backlight, no underglow
 $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow
 $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow

 ## Helix pico build
 $ make helix/pico:default       ## no oled, no backlight, no underglow
 $ make helix/pico/back:default  ## no oled, with backlight, no underglow
 $ make helix/pico/under:default ## no oled, no backlight, with underglow
 $ make helix/pico/oled:default  ## with oled, no backlight, not underglow

* add temporary test shell-spript

* test end remove test script. Revert "add temporary test shell-spript"

This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657.

* test end remove test script. Revert "add temporary test shell-spript"

This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed.

* Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'.

No change in build result.

* update keyboards/helix/{rev2,pico}/keymaps/default/readme.md

* rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk

* update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md

* rm keyboards/helix/pico/oled/rules.mk

* update helix's readmes. All the ':avrdude' was replaced with ':flash'.

* remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk

No change in build result.
2019-10-16 11:01:49 -07:00
fauxpark 3b2a484a5b Remove redundant KC_TRNS and KC_NO fillers in remaining keymaps (#5154) 2019-02-17 07:38:46 -08:00
noroadsleft 7f4f0f7685 Remove deprecated QUANTUM_DIR code blocks from makefiles (#4754)
* Remove QUANTUM_DIR code blocks from keyboard rules

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.

* remove QUANTUM_DIR code blocks from rules for default keymaps

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.

* remove QUANTUM_DIR code blocks from rules for user keymaps

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)

* remove QUANTUM_DIR code blocks from rules for community layouts

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.

* remove QUANTUM_DIR code blocks from rules for userspaces

This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
2019-01-04 07:25:48 -08:00
MakotoKurauchi b8db0b26b1 Keymap: Fixed a problem with underglow with froggy keymap (#4580) 2018-12-09 08:42:28 -08:00
Drashna Jaelre 00b6f14821 Replace outdated RGB/Audio information 2018-10-22 14:55:05 -04:00
MakotoKurauchi 79bff50247 Keymaps: Helix rgblight mode update (#4091)
* Helix each keymap's using rgblight mode symbol instead magic number

No change in build result.

* Helix pico keymaps: make rgblight modes selectable.

No change in build result.

* Helix rev2 keymaps: make rgblight modes selectable.

No change in build result.

* fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT)

* Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h.
2018-10-10 12:53:18 -07:00
MakotoKurauchi b3d80d4af0 Keymap: Helix : Update froggy keymap (#3652)
* led ripple effect

* fix key name
2018-08-15 09:30:34 -07:00
MakotoKurauchi feb5e4aaeb Keyboard: Helix serial improvements (#3608)
* add change_reciver2sender()/change_sender2reciver()

This is a change to improve readability.

* txled, rxled off in matrix_init()

* add serial_send_packet() / serial_recive_packet()

This is a change to reduce object size.

* add serial_low() at ISR() top

* add __attribute__((always_inline)) to some functions

* modify serial_send_packet()/serial_recive_packet()

A little, object size reduction.
A little, speedup.

* add debug code to helix/serial.c

* Adjust sampling timing of serial signal being received

* add split_scomm.c/split_scomm.h and change serial.c/serial.h

serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.

* add split_scomm.c/split_scomm.h into helix/rev1

* reduce object size helix/rev2/matrix.c

* remove checksum check, add parity check

* force occur parity error for test

* parity test ok. remove test code

* change some comment & add skip code when buffer_size == 0

* serial.c: multiple types of transaction support

Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.

* helix serial master-slave transaction optimize

Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.

* add debug code for retry

* add comment into each config.h

* fix ISR status drop

* add a debug macro 'debug_retry_chg()'

* reduce led_test size

* remove debug code from helix/serial.c and etc.

* helix:five_rows change TAPPING_TERM value 140

* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.

- The difference with the original let's split's serial.c
  - It's high-speed about 4 times.
  - Stable bi-directional data transfer. (Helix need master to slave transfer)
  - serial.h was divided 2 files, serial_config.h and sereial.h
  - With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)

- USE OLD Simple APIs (compatible with let's split serial.c)
  - files :
    - serial_config.h -- hardware configuration (need include by config.h)
    - serial.c/serial.h -- serial communication

- USE NEW flexible APIs. (Support multi-type transaction function.)
  serial.c was divided into 2 layers, split_scom.c and serial.c.
  The upper layer split_scomm.c is called from matrix.c.
  The lower layer serial.c accesses the hardware.
  - files
    - split_scomm.c -- communication buffer is defined in here. call by matrix.c.
    - split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
    - serial_config.h -- hardware configuration (need include by config.h)
      To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
    - serial.c/serial.h -- serial communication lower layer

- NEW APIs for serial.c / serial.h (The lower layer)
  // Soft Serial Transaction Descriptor
  typedef struct _SSTD_t  {
      uint8_t *status;
      uint8_t initiator2target_buffer_size;
      uint8_t *initiator2target_buffer;
      uint8_t target2initiator_buffer_size;
      uint8_t *target2initiator_buffer;
  } SSTD_t;

  // initiator is transaction start side
  void soft_serial_initiator_init(SSTD_t *sstd_table);
  // target is interrupt accept side
  void soft_serial_target_init(SSTD_t *sstd_table);
  int soft_serial_transaction(int sstd_index);
  int soft_serial_get_and_clean_target_status(int sstd_index);

- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
   move from old serial.c the following buffer and functions
     serial_slave_buffer[]
     serial_master_buffer[]
     void serial_master_init(void)
     void serial_slave_init(void)
     int serial_update_buffers(void)
   define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
2018-08-10 08:22:09 -07:00
Takeshi ISHII b29799f887 Keyboard: fixed build break (size overflow) HelixPico with Backlight or Underglow (#3546)
* build break fix for HelixPico

* add customize variable 'Link_Time_Optimization' into rev2 and pico keymaps rules.mk

* "CFLAGS += -flto" change to "EXTRAFLAGS += -flto"

* add USE_Link_Time_Optimization macro
2018-08-02 14:16:17 -07:00
MakotoKurauchi f30d6dd785 Helix config refine (#3374)
* helix config.h refine
2018-07-12 10:23:30 -07:00
MakotoKurauchi 155375ea32 Helix shrink config (#3268)
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION

* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md

* change helix/ssd1306.c for select glcdfont.c position

* add variable LOCAL_GLCDFONT into each keymaps rules.mk

* Add iPhone/iPad LED support to Helix default keymap

* renumber _ADJUST for shrink program size

* Fix Helix i2c wrong bit rate

* add helix serial debug code

* serial debug macro move from config.h to serial.h

* helix serial.c debugging...

* refine debug macros

* add some comments

* add SELECT_SERIAL_SPEED

* add comments

* debugging sync_send/sync_recv

* add very high speed

* fix sync_send/sync_recv

* fix com. start and switch send/recv

* debug mode off

* remove debug codes

* Shrinked config.h
2018-06-30 13:12:17 -07:00
noroadsleft e84c07e6f7 Helix: Refactor and Configurator support (#3238)
* Matrix refactor

* Keymap refactor

* Configurator support
2018-06-27 07:37:27 -07:00
MakotoKurauchi 0f3a73025c Fix Helix i2c wrong bit rate (#3207) 2018-06-21 10:44:33 -07:00
MakotoKurauchi 7498b184b7 Support ios to default keymap (#3118)
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION

* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md

* change helix/ssd1306.c for select glcdfont.c position

* add variable LOCAL_GLCDFONT into each keymaps rules.mk

* Add iPhone/iPad LED support to Helix default keymap

* add Freggy keymap

* adjust the delay of serial.c

* change readme

* renumber _ADJUST for shrink program size
2018-06-04 08:14:35 -07:00