[Keyboard] handwired/twadlee/tp69 (#9013)

Includes info.json for custom layout and a minimal default keymap.
daktil_manuform
Tracy Wadleigh 2020-05-18 01:52:55 -07:00 committed by GitHub
parent 5d01cc45be
commit fca35a3540
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
12 changed files with 1814 additions and 0 deletions

View File

@ -0,0 +1,700 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file rt/templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
#ifndef CHCONF_H
# define CHCONF_H
# define _CHIBIOS_RT_CONF_
# define _CHIBIOS_RT_CONF_VER_6_0_
/*===========================================================================*/
/**
* @name System timers settings
* @{
*/
/*===========================================================================*/
/**
* @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
# if !defined(CH_CFG_ST_RESOLUTION)
# define CH_CFG_ST_RESOLUTION 32
# endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
# if !defined(CH_CFG_ST_FREQUENCY)
# define CH_CFG_ST_FREQUENCY 1000
# endif
/**
* @brief Time intervals data size.
* @note Allowed values are 16, 32 or 64 bits.
*/
# if !defined(CH_CFG_INTERVALS_SIZE)
# define CH_CFG_INTERVALS_SIZE 32
# endif
/**
* @brief Time types data size.
* @note Allowed values are 16 or 32 bits.
*/
# if !defined(CH_CFG_TIME_TYPES_SIZE)
# define CH_CFG_TIME_TYPES_SIZE 32
# endif
/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
* of ticks that is safe to specify in a timeout directive.
* The value one is not valid, timeouts are rounded up to
* this value.
*/
# if !defined(CH_CFG_ST_TIMEDELTA)
# define CH_CFG_ST_TIMEDELTA 0
# endif
/** @} */
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
* @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
# if !defined(CH_CFG_TIME_QUANTUM)
# define CH_CFG_TIME_QUANTUM 20
# endif
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
# if !defined(CH_CFG_MEMCORE_SIZE)
# define CH_CFG_MEMCORE_SIZE 0
# endif
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
* infinite loop.
*/
# if !defined(CH_CFG_NO_IDLE_THREAD)
# define CH_CFG_NO_IDLE_THREAD FALSE
# endif
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_OPTIMIZE_SPEED)
# define CH_CFG_OPTIMIZE_SPEED TRUE
# endif
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Time Measurement APIs.
* @details If enabled then the time measurement APIs are included in
* the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_TM)
# define CH_CFG_USE_TM FALSE
# endif
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_REGISTRY)
# define CH_CFG_USE_REGISTRY TRUE
# endif
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_WAITEXIT)
# define CH_CFG_USE_WAITEXIT TRUE
# endif
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_SEMAPHORES)
# define CH_CFG_USE_SEMAPHORES TRUE
# endif
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
# if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
# define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
# endif
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_MUTEXES)
# define CH_CFG_USE_MUTEXES TRUE
# endif
/**
* @brief Enables recursive behavior on mutexes.
* @note Recursive mutexes are heavier and have an increased
* memory footprint.
*
* @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
# if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
# define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
# endif
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
# if !defined(CH_CFG_USE_CONDVARS)
# define CH_CFG_USE_CONDVARS TRUE
# endif
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
# if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
# define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
# endif
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_EVENTS)
# define CH_CFG_USE_EVENTS TRUE
# endif
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
# if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
# define CH_CFG_USE_EVENTS_TIMEOUT TRUE
# endif
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_MESSAGES)
# define CH_CFG_USE_MESSAGES TRUE
# endif
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
# if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
# define CH_CFG_USE_MESSAGES_PRIORITY FALSE
# endif
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
# if !defined(CH_CFG_USE_MAILBOXES)
# define CH_CFG_USE_MAILBOXES TRUE
# endif
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_MEMCORE)
# define CH_CFG_USE_MEMCORE TRUE
# endif
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
* @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
# if !defined(CH_CFG_USE_HEAP)
# define CH_CFG_USE_HEAP TRUE
# endif
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_MEMPOOLS)
# define CH_CFG_USE_MEMPOOLS TRUE
# endif
/**
* @brief Objects FIFOs APIs.
* @details If enabled then the objects FIFOs APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_OBJ_FIFOS)
# define CH_CFG_USE_OBJ_FIFOS TRUE
# endif
/**
* @brief Pipes APIs.
* @details If enabled then the pipes APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
# if !defined(CH_CFG_USE_PIPES)
# define CH_CFG_USE_PIPES TRUE
# endif
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
# if !defined(CH_CFG_USE_DYNAMIC)
# define CH_CFG_USE_DYNAMIC TRUE
# endif
/** @} */
/*===========================================================================*/
/**
* @name Objects factory options
* @{
*/
/*===========================================================================*/
/**
* @brief Objects Factory APIs.
* @details If enabled then the objects factory APIs are included in the
* kernel.
*
* @note The default is @p FALSE.
*/
# if !defined(CH_CFG_USE_FACTORY)
# define CH_CFG_USE_FACTORY TRUE
# endif
/**
* @brief Maximum length for object names.
* @details If the specified length is zero then the name is stored by
* pointer but this could have unintended side effects.
*/
# if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
# define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
# endif
/**
* @brief Enables the registry of generic objects.
*/
# if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
# define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
# endif
/**
* @brief Enables factory for generic buffers.
*/
# if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
# define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
# endif
/**
* @brief Enables factory for semaphores.
*/
# if !defined(CH_CFG_FACTORY_SEMAPHORES)
# define CH_CFG_FACTORY_SEMAPHORES TRUE
# endif
/**
* @brief Enables factory for mailboxes.
*/
# if !defined(CH_CFG_FACTORY_MAILBOXES)
# define CH_CFG_FACTORY_MAILBOXES TRUE
# endif
/**
* @brief Enables factory for objects FIFOs.
*/
# if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
# define CH_CFG_FACTORY_OBJ_FIFOS TRUE
# endif
/**
* @brief Enables factory for Pipes.
*/
# if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
# define CH_CFG_FACTORY_PIPES TRUE
# endif
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, kernel statistics.
*
* @note The default is @p FALSE.
*/
# if !defined(CH_DBG_STATISTICS)
# define CH_DBG_STATISTICS FALSE
# endif
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
# if !defined(CH_DBG_SYSTEM_STATE_CHECK)
# define CH_DBG_SYSTEM_STATE_CHECK TRUE
# endif
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
# if !defined(CH_DBG_ENABLE_CHECKS)
# define CH_DBG_ENABLE_CHECKS TRUE
# endif
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
# if !defined(CH_DBG_ENABLE_ASSERTS)
# define CH_DBG_ENABLE_ASSERTS TRUE
# endif
/**
* @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
# if !defined(CH_DBG_TRACE_MASK)
# define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
# endif
/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
# if !defined(CH_DBG_TRACE_BUFFER_SIZE)
# define CH_DBG_TRACE_BUFFER_SIZE 128
# endif
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
# if !defined(CH_DBG_ENABLE_STACK_CHECK)
# define CH_DBG_ENABLE_STACK_CHECK TRUE
# endif
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
# if !defined(CH_DBG_FILL_THREADS)
# define CH_DBG_FILL_THREADS TRUE
# endif
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p FALSE.
* @note This debug option is not currently compatible with the
* tickless mode.
*/
# if !defined(CH_DBG_THREADS_PROFILING)
# define CH_DBG_THREADS_PROFILING FALSE
# endif
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief System structure extension.
* @details User fields added to the end of the @p ch_system_t structure.
*/
# define CH_CFG_SYSTEM_EXTRA_FIELDS /* Add threads custom fields here.*/
/**
* @brief System initialization hook.
* @details User initialization code added to the @p chSysInit() function
* just before interrupts are enabled globally.
*/
# define CH_CFG_SYSTEM_INIT_HOOK() \
{ /* Add threads initialization code here.*/ }
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
# define CH_CFG_THREAD_EXTRA_FIELDS /* Add threads custom fields here.*/
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p _thread_init() function.
*
* @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
# define CH_CFG_THREAD_INIT_HOOK(tp) \
{ /* Add threads initialization code here.*/ }
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*/
# define CH_CFG_THREAD_EXIT_HOOK(tp) \
{ /* Add threads finalization code here.*/ }
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
# define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) \
{ /* Context switch code here.*/ }
/**
* @brief ISR enter hook.
*/
# define CH_CFG_IRQ_PROLOGUE_HOOK() \
{ /* IRQ prologue code here.*/ }
/**
* @brief ISR exit hook.
*/
# define CH_CFG_IRQ_EPILOGUE_HOOK() \
{ /* IRQ epilogue code here.*/ }
/**
* @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
# define CH_CFG_IDLE_ENTER_HOOK() \
{ /* Idle-enter code here.*/ }
/**
* @brief Idle thread leave hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
# define CH_CFG_IDLE_LEAVE_HOOK() \
{ /* Idle-leave code here.*/ }
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
# define CH_CFG_IDLE_LOOP_HOOK() \
{ /* Idle loop code here.*/ }
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
# define CH_CFG_SYSTEM_TICK_HOOK() \
{ /* System tick event code here.*/ }
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
# define CH_CFG_SYSTEM_HALT_HOOK(reason) \
{ /* System halt code here.*/ }
/**
* @brief Trace hook.
* @details This hook is invoked each time a new record is written in the
* trace buffer.
*/
# define CH_CFG_TRACE_HOOK(tep) \
{ /* Trace code here.*/ }
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* CHCONF_H */
/** @} */

View File

@ -0,0 +1,253 @@
/*
Copyright 2020 Tracy Wadleigh
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
//#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xBEEF
#define PRODUCT_ID 0xCACA
#define DEVICE_VER 0x0001
#define MANUFACTURER Tracy Wadleigh
#define PRODUCT tp69
#define DESCRIPTION A custom 69-key 65% keyboard with a trackpoint under keycap
/* key matrix size */
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*/
/* 19 17 16 15 14 2 8 6 7 9 */
#define MATRIX_ROW_PINS { B2, B1, B0, C0, D1, D0, D3, D4, D2, C3 }
/* 20 21 18 0 1 3 4 5 */
#define MATRIX_COL_PINS { D5, D6, A4, B16, B17, A1, A2, D7 }
#define UNUSED_PINS
/* for trackpoint: C1 (22) C2 (23) */
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== all animations enable ==*/
// #define RGBLIGHT_ANIMATIONS
// /*== or choose animations ==*/
// #define RGBLIGHT_EFFECT_BREATHING
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
// #define RGBLIGHT_EFFECT_SNAKE
// #define RGBLIGHT_EFFECT_KNIGHT
// #define RGBLIGHT_EFFECT_CHRISTMAS
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
/* defined by default; to change, uncomment and set to the combination you want */
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP H
//#define MAGIC_KEY_HELP_ALT SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER0_ALT GRAVE
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER B
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
/*
* HD44780 LCD Display Configuration
*/
/*
#define LCD_LINES 2 //< number of visible lines of the display
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
#if LCD_IO_MODE
#define LCD_PORT PORTB //< port for the LCD lines
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
#define LCD_RS_PORT LCD_PORT //< port for RS line
#define LCD_RS_PIN 3 //< pin for RS line
#define LCD_RW_PORT LCD_PORT //< port for RW line
#define LCD_RW_PIN 2 //< pin for RW line
#define LCD_E_PORT LCD_PORT //< port for Enable line
#define LCD_E_PIN 1 //< pin for Enable line
#endif
*/
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0

View File

@ -0,0 +1,524 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef HALCONF_H
# define HALCONF_H
# define _CHIBIOS_HAL_CONF_
# define _CHIBIOS_HAL_CONF_VER_7_0_
# include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
# define HAL_USE_PAL TRUE
# endif
/**
* @brief Enables the ADC subsystem.
*/
# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
# define HAL_USE_ADC FALSE
# endif
/**
* @brief Enables the CAN subsystem.
*/
# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
# define HAL_USE_CAN FALSE
# endif
/**
* @brief Enables the cryptographic subsystem.
*/
# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
# define HAL_USE_CRY FALSE
# endif
/**
* @brief Enables the DAC subsystem.
*/
# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
# define HAL_USE_DAC FALSE
# endif
/**
* @brief Enables the GPT subsystem.
*/
# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
# define HAL_USE_GPT FALSE
# endif
/**
* @brief Enables the I2C subsystem.
*/
# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
# define HAL_USE_I2C FALSE
# endif
/**
* @brief Enables the I2S subsystem.
*/
# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
# define HAL_USE_I2S FALSE
# endif
/**
* @brief Enables the ICU subsystem.
*/
# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
# define HAL_USE_ICU FALSE
# endif
/**
* @brief Enables the MAC subsystem.
*/
# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
# define HAL_USE_MAC FALSE
# endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
# define HAL_USE_MMC_SPI FALSE
# endif
/**
* @brief Enables the PWM subsystem.
*/
# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
# define HAL_USE_PWM FALSE
# endif
/**
* @brief Enables the RTC subsystem.
*/
# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
# define HAL_USE_RTC FALSE
# endif
/**
* @brief Enables the SDC subsystem.
*/
# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
# define HAL_USE_SDC FALSE
# endif
/**
* @brief Enables the SERIAL subsystem.
*/
# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
# define HAL_USE_SERIAL FALSE
# endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
# define HAL_USE_SERIAL_USB FALSE
# endif
/**
* @brief Enables the SIO subsystem.
*/
# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
# define HAL_USE_SIO FALSE
# endif
/**
* @brief Enables the SPI subsystem.
*/
# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
# define HAL_USE_SPI FALSE
# endif
/**
* @brief Enables the TRNG subsystem.
*/
# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
# define HAL_USE_TRNG FALSE
# endif
/**
* @brief Enables the UART subsystem.
*/
# if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
# define HAL_USE_UART FALSE
# endif
/**
* @brief Enables the USB subsystem.
*/
# if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
# define HAL_USE_USB TRUE
# endif
/**
* @brief Enables the WDG subsystem.
*/
# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
# define HAL_USE_WDG FALSE
# endif
/**
* @brief Enables the WSPI subsystem.
*/
# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
# define HAL_USE_WSPI FALSE
# endif
/*===========================================================================*/
/* PAL driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
# define PAL_USE_CALLBACKS FALSE
# endif
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
# define PAL_USE_WAIT FALSE
# endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
# define ADC_USE_WAIT TRUE
# endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
# define ADC_USE_MUTUAL_EXCLUSION TRUE
# endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
# define CAN_USE_SLEEP_MODE TRUE
# endif
/**
* @brief Enforces the driver to use direct callbacks rather than OSAL events.
*/
# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
# define CAN_ENFORCE_USE_CALLBACKS FALSE
# endif
/*===========================================================================*/
/* CRY driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the SW fall-back of the cryptographic driver.
* @details When enabled, this option, activates a fall-back software
* implementation for algorithms not supported by the underlying
* hardware.
* @note Fall-back implementations may not be present for all algorithms.
*/
# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
# define HAL_CRY_USE_FALLBACK FALSE
# endif
/**
* @brief Makes the driver forcibly use the fall-back implementations.
*/
# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
# define HAL_CRY_ENFORCE_FALLBACK FALSE
# endif
/*===========================================================================*/
/* DAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
# define DAC_USE_WAIT TRUE
# endif
/**
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
# define DAC_USE_MUTUAL_EXCLUSION TRUE
# endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
# define I2C_USE_MUTUAL_EXCLUSION TRUE
# endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the zero-copy API.
*/
# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
# define MAC_USE_ZERO_COPY FALSE
# endif
/**
* @brief Enables an event sources for incoming packets.
*/
# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
# define MAC_USE_EVENTS TRUE
# endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
# define MMC_NICE_WAITING TRUE
# endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
# define SDC_INIT_RETRY 100
# endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
# define SDC_MMC_SUPPORT FALSE
# endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
# define SDC_NICE_WAITING TRUE
# endif
/**
* @brief OCR initialization constant for V20 cards.
*/
# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
# define SDC_INIT_OCR_V20 0x50FF8000U
# endif
/**
* @brief OCR initialization constant for non-V20 cards.
*/
# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
# define SDC_INIT_OCR 0x80100000U
# endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
# define SERIAL_DEFAULT_BITRATE 38400
# endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 16 bytes for both the transmission and receive
* buffers.
*/
# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
# define SERIAL_BUFFERS_SIZE 16
# endif
/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
/**
* @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
* @note The default is 256 bytes for both the transmission and receive
* buffers.
*/
# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
# define SERIAL_USB_BUFFERS_SIZE 1
# endif
/**
* @brief Serial over USB number of buffers.
* @note The default is 2 buffers.
*/
# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
# define SERIAL_USB_BUFFERS_NUMBER 2
# endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
# define SPI_USE_WAIT TRUE
# endif
/**
* @brief Enables circular transfers APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
# define SPI_USE_CIRCULAR FALSE
# endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
# define SPI_USE_MUTUAL_EXCLUSION TRUE
# endif
/**
* @brief Handling method for SPI CS line.
* @note Disabling this option saves both code and data space.
*/
# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
# endif
/*===========================================================================*/
/* UART driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
# define UART_USE_WAIT FALSE
# endif
/**
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
# define UART_USE_MUTUAL_EXCLUSION FALSE
# endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
# define USB_USE_WAIT TRUE
# endif
/*===========================================================================*/
/* WSPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
# define WSPI_USE_WAIT TRUE
# endif
/**
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
# define WSPI_USE_MUTUAL_EXCLUSION TRUE
# endif
#endif /* HALCONF_H */
/** @} */

View File

@ -0,0 +1,12 @@
{
"keyboard_name": "Twadlee TP69",
"url": "https://github.com/twadleigh/qmk_firmware",
"maintainer": "qmk",
"width": 16,
"height": 5,
"layouts": {
"LAYOUT": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3}, {"x":13.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2}, {"x":5.75, "y":4}, {"x":6.75, "y":4}, {"x":7.75, "y":4}, {"x":8.75, "y":4, "w":2.25}, {"x":11, "y":4, "w":1.25}, {"x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4, "w":1.25}, {"x":14.75, "y":4, "w":1.25}]
}
}
}

View File

@ -0,0 +1,28 @@
/* Copyright 2020 Tracy Wadleigh
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names { _BASE };
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_LGUI, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_PGUP, KC_PGDN,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LALT, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCTL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_MS_BTN1, KC_MS_BTN3, KC_MS_BTN2, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL
)
};

View File

@ -0,0 +1 @@
# The default keymap for tp69

View File

@ -0,0 +1,45 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define KL2x_MCUCONF
/*
* HAL driver system settings.
*/
/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
#define KINETIS_PLLCLK_FREQUENCY 96000000UL
#define KINETIS_SYSCLK_FREQUENCY 48000000UL
/*
* SERIAL driver system settings.
*/
#define KINETIS_SERIAL_USE_UART0 TRUE
/*
* USB driver settings
*/
#define KINETIS_USB_USE_USB0 TRUE
/* Need to redefine this, since the default (configured for K20x) might not apply
* 2 for Teensy LC
* 5 for Teensy 3.x */
#define KINETIS_USB_USB0_IRQ_PRIORITY 2
#endif /* _MCUCONF_H_ */

View File

@ -0,0 +1,18 @@
# Twadlee TP69
![tp69](https://i.imgur.com/sC1qmJS.png)
A 69-key keyboard having a Trackpoint unit under an additional 70th keycap.
The layout is similar to a conventional 60% keyboard, but with additional 1u keys down a central split. The spacebar is also split, with the intervening space occupied by three mouse buttons and the left half replaced by a relocated `BACKSPACE` key. The right half of the spacebar is 2.25u. The space vacated by the `BACKSPACE` key is split into two additional 1u keys. The additional keycap on the home row does not cover a switch but a Trackpoint pointing device. All told, the 61 keycaps of the conventional 60% layout are augmented by an additional 9 1u keycaps, and a 2.25u keycap to replace the conventional 6.25u spacebar.
Given the unconventional layout, only non-sculpted keycap profiles are practical. I use DSAs.
* Keyboard Maintainer: [Tracy Wadleigh](https://github.com/twadleigh)
* Hardware Supported: Teensy LC controller
Make example for this keyboard (after setting up your build environment):
make handwired/twadlee/tp69:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,28 @@
# MCU name
MCU = MKL26Z64
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
PS2_MOUSE_ENABLE = no
USE_CHIBIOS_CONTRIB = yes
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View File

@ -0,0 +1,18 @@
/* Copyright 2020 Tracy Wadleigh
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "tp69.h"

View File

@ -0,0 +1,48 @@
/* Copyright 2020 Tracy Wadleigh
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
/* This is a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT( \
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \
k10, k11, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k66, k67, \
k20, k21, k23, k24, k25, k27, /**/ k70, k71, k72, k73, k74, k75, k77, \
k30, k32, k33, k34, k35, k36, k37, k81, k82, k83, k84, k85, k86, \
k40, k41, k43, k44, k46, k47, k91, k92, k94, k95, k96, k97 \
) \
{ \
{ k00, k01, k02, k03, k04, k05, k06, k07}, \
{ k10, k11, KC_NO, k13, k14, k15, k16, k17}, \
{ k20, k21, KC_NO, k23, k24, k25, KC_NO, k27}, \
{ k30, KC_NO, k32, k33, k34, k35, k36, k37}, \
{ k40, k41, KC_NO, k43, k44, KC_NO, k46, k47}, \
{ k50, k51, k52, k53, k54, k55, k56, k57}, \
{ k60, k61, k62, k63, k64, k65, k66, k67}, \
{ k70, k71, k72, k73, k74, k75, KC_NO, k77}, \
{KC_NO, k81, k82, k83, k84, k85, k86, KC_NO}, \
{KC_NO, k91, k92, KC_NO, k94, k95, k96, k97} \
}

View File

@ -0,0 +1,139 @@
[
{
"backcolor": "",
"name": "65% keyboard with pointing device under keycap",
"author": "Tracy Wadleigh",
"plate": false
},
[
{
"a": 7,
"f": 5
},
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
""
],
[
{
"w": 1.5
},
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
{
"w": 1.5
},
""
],
[
{
"w": 1.75
},
"",
"",
"",
"",
"",
"",
{
"x": 1
},
"",
"",
"",
"",
"",
"",
{
"w": 2.25
},
""
],
[
{
"w": 2.25
},
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
"",
{
"w": 2.75
},
""
],
[
{
"w": 1.25
},
"",
{
"w": 1.25
},
"",
{
"w": 1.25
},
"",
{
"w": 2
},
"",
"",
"",
"",
{
"w": 2.25
},
"",
{
"w": 1.25
},
"",
{
"w": 1.25
},
"",
{
"w": 1.25
},
"",
{
"w": 1.25
},
""
]
]