Migrate `LOCKING_*_ENABLE` to Data-Driven: O (#23778)

Affects:

  - `oddball`
  - `oddforge/vea`
  - `ok60`
  - `om60`
  - `omkbd/ergodash/mini`
  - `omkbd/ergodash/rev1`
  - `omkbd/runner3680/3x6`
  - `omkbd/runner3680/3x7`
  - `omkbd/runner3680/3x8`
  - `omkbd/runner3680/4x6`
  - `omkbd/runner3680/4x7`
  - `omkbd/runner3680/4x8`
  - `omkbd/runner3680/5x6`
  - `omkbd/runner3680/5x6_5x8`
  - `omkbd/runner3680/5x7`
  - `omkbd/runner3680/5x8`
  - `omnikeyish`
  - `orange75`
  - `org60`
  - `ortho5by12`
  - `orthocode`

keyboards/oddball/config.h

@@ -21,11 +21,6 @@
 #define SPLIT_USB_DETECT
 #define MASTER_RIGHT
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 /* optical sensor settings */
 #define SCROLL_DIVIDER 12
 #define CPI_1 2000

keyboards/oddball/info.json

@@ -15,6 +15,12 @@
         "nkro": false,
         "pointing_device": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "split": {
         "enabled": true
     },

keyboards/oddforge/vea/config.h

@@ -21,7 +21,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 15
 
-#define LOCKING_SUPPORT_ENABLE
-#define LOCKING_RESYNC_ENABLE
-
 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 9

keyboards/oddforge/vea/keyboard.json

@@ -15,6 +15,12 @@
         "mousekey": false,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "backlight": {
         "pin": "D4"
     },

keyboards/ok60/config.h

@@ -1,24 +0,0 @@
-/*
-Copyright 2018 Edward Browncross
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE

keyboards/ok60/keyboard.json

@@ -18,6 +18,12 @@
     "nkro": true,
     "rgblight": true
   },
+  "qmk": {
+    "locking": {
+      "enabled": true,
+      "resync": true
+    }
+  },
   "matrix_pins": {
     "cols": ["D0", "D1", "D2", "D3", "D5", "B6", "C6", "C7", "F1", "F0", "E6", "B3", "B2", "B1", "B0"],
     "rows": ["B5", "B4", "D7", "D6", "D4"]

keyboards/om60/config.h

@@ -29,11 +29,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 }
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, E6 }
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #ifndef IOS_DEVICE_ENABLE
   #define RGBLIGHT_LIMIT_VAL 90
   #define RGBLIGHT_VAL_STEP 17

keyboards/om60/keyboard.json

@@ -22,7 +22,11 @@
     ]
   },
   "qmk": {
-    "tap_keycode_delay": 10
+    "tap_keycode_delay": 10,
+    "locking": {
+      "enabled": true,
+      "resync": true
+    }
   },
   "rgblight": {
     "hue_steps": 10,

keyboards/omkbd/ergodash/mini/config.h

@@ -20,11 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define AUDIO_PIN C6
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/ergodash/mini/keyboard.json

@@ -14,6 +14,12 @@
         "mousekey": false,
         "nkro": false
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
         "rows": ["D7", "E6", "B4", "B5"]

keyboards/omkbd/ergodash/rev1/config.h

@@ -20,11 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define AUDIO_PIN C6
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/ergodash/rev1/keyboard.json

@@ -14,6 +14,12 @@
         "mousekey": false,
         "nkro": false
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2"],
         "rows": ["D4", "D7", "E6", "B4", "B5"]

keyboards/omkbd/runner3680/3x6/config.h

@@ -16,11 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/runner3680/3x6/keyboard.json

@@ -8,6 +8,12 @@
         "pid": "0x0000",
         "device_version": "0.0.5"
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F6", "F7", "B1", "B3", "B2", "B6"],
         "rows": ["D4", "C6", "D7"]

keyboards/omkbd/runner3680/3x7/config.h

@@ -16,11 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/runner3680/3x7/keyboard.json

@@ -8,6 +8,12 @@
         "pid": "0x0000",
         "device_version": "0.0.5"
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
         "rows": ["D4", "C6", "D7"]

keyboards/omkbd/runner3680/3x8/config.h

@@ -16,11 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/runner3680/3x8/keyboard.json

@@ -8,6 +8,12 @@
         "pid": "0x0000",
         "device_version": "0.0.5"
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
         "rows": ["D4", "C6", "D7"]

keyboards/omkbd/runner3680/4x6/config.h

@@ -16,11 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/runner3680/4x6/keyboard.json

@@ -8,6 +8,12 @@
         "pid": "0x0000",
         "device_version": "0.0.5"
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F6", "F7", "B1", "B3", "B2", "B6"],
         "rows": ["D4", "C6", "D7", "E6"]

keyboards/omkbd/runner3680/4x7/config.h

@@ -16,11 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/runner3680/4x7/keyboard.json

@@ -8,6 +8,12 @@
         "pid": "0x0000",
         "device_version": "0.0.5"
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
         "rows": ["D4", "C6", "D7", "E6"]

keyboards/omkbd/runner3680/4x8/config.h

@@ -16,11 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/runner3680/4x8/keyboard.json

@@ -8,6 +8,12 @@
         "pid": "0x0000",
         "device_version": "0.0.5"
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
         "rows": ["D4", "C6", "D7", "E6"]

keyboards/omkbd/runner3680/5x6/config.h

@@ -16,11 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/runner3680/5x6/keyboard.json

@@ -8,6 +8,12 @@
         "pid": "0x0000",
         "device_version": "0.0.5"
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F6", "F7", "B1", "B3", "B2", "B6"],
         "rows": ["D4", "C6", "D7", "E6", "B4"]

keyboards/omkbd/runner3680/5x6_5x8/config.h

@@ -16,11 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/runner3680/5x6_5x8/keyboard.json

@@ -8,6 +8,12 @@
         "pid": "0x5658",
         "device_version": "0.0.5"
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "rgb_matrix": {
         "driver": "ws2812",
         "split_count": [30, 40]

keyboards/omkbd/runner3680/5x7/config.h

@@ -16,11 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/runner3680/5x7/keyboard.json

@@ -8,6 +8,12 @@
         "pid": "0x0000",
         "device_version": "0.0.5"
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F5", "F6", "F7", "B1", "B3", "B2", "B6"],
         "rows": ["D4", "C6", "D7", "E6", "B4"]

keyboards/omkbd/runner3680/5x8/config.h

@@ -16,11 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:

keyboards/omkbd/runner3680/5x8/keyboard.json

@@ -8,6 +8,12 @@
         "pid": "0x0000",
         "device_version": "0.0.5"
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
         "rows": ["D4", "C6", "D7", "E6", "B4"]

keyboards/omnikeyish/config.h

@@ -14,12 +14,6 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION ROW2COL
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define DYNAMIC_MACRO_COUNT 12
 #define DYNAMIC_MACRO_SIZE 48
 #define DYNAMIC_MACRO_EEPROM_STORAGE

keyboards/omnikeyish/keyboard.json

@@ -17,6 +17,12 @@
         "mousekey": false,
         "nkro": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "indicators": {
         "caps_lock": "E1",
         "num_lock": "E0",

keyboards/orange75/config.h

@@ -1,7 +0,0 @@
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE

keyboards/orange75/keyboard.json

@@ -17,6 +17,12 @@
         "mousekey": true,
         "nkro": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["D3", "D2", "D1", "D0", "B7", "B3"],
         "rows": ["E6", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B4", "D7", "D4", "D5", "D6"]

keyboards/org60/config.h

@@ -1,23 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE

keyboards/org60/keyboard.json

@@ -18,6 +18,12 @@
         "nkro": true,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F0", "F1", "E6", "C7", "C6", "B6", "D4", "B1", "B7", "B5", "B4", "D7", "D6", "B3"],
         "rows": ["D0", "D1", "D2", "D3", "D5"]

keyboards/ortho5by12/config.h

@@ -1,20 +0,0 @@
-/*
-Copyright 2019 Takuya Urakawa (dm9records.com)
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE

keyboards/ortho5by12/keyboard.json

@@ -16,6 +16,12 @@
     "mousekey": false,
     "nkro": false
   },
+  "qmk": {
+    "locking": {
+      "enabled": true,
+      "resync": true
+    }
+  },
   "matrix_pins": {
     "cols": ["C2", "D0", "D1", "D4", "C3", "C1"],
     "rows": ["B5", "B1", "B2", "B3", "B4", "C0", "D5", "D6", "D7", "B0"]

keyboards/orthocode/config.h

@@ -1,22 +0,0 @@
-/*Copyright 2020 Jrodna
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE

keyboards/orthocode/keyboard.json

@@ -31,7 +31,11 @@
         ]
     },
     "qmk": {
-        "tap_keycode_delay": 10
+        "tap_keycode_delay": 10,
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
     },
     "rgblight": {
         "saturation_steps": 8,