[Keyboard] LFKPad refactor (#8079)
fauxpark
GitHub
parent
74e3cad728
commit
efe8bd8e92
|
|
@ -15,31 +15,56 @@ You should have received a copy of the GNU General Public License
|
|||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER LFKeyboards
|
||||
#define PRODUCT LFKPad 21
|
||||
#define DESCRIPTION QMK keyboard firmware for LFKPad LFK_REV_STRING
|
||||
#define DESCRIPTION QMK keyboard firmware for LFKPad
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 4
|
||||
#define MATRIX_ROW_PINS { D5, F4, F6, F7, C7, C6}
|
||||
#define MATRIX_COL_PINS { F1, F0, D4, D6}
|
||||
#define UNUSED_PINS { }
|
||||
#define RGBLED_NUM 28 // Number of LEDs
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D5, F4, F6, F7, C7, C6 }
|
||||
#define MATRIX_COL_PINS { F1, F0, D4, D6 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
#ifdef RGB_DI_PIN
|
||||
# define RGBLED_NUM 28
|
||||
# define RGBLIGHT_HUE_STEP 10
|
||||
# define RGBLIGHT_SAT_STEP 17
|
||||
# define RGBLIGHT_VAL_STEP 17
|
||||
# define RGBLIGHT_ANIMATIONS
|
||||
#endif
|
||||
|
||||
#define TAPPING_TERM 200
|
||||
|
||||
|
|
@ -49,13 +74,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
|
|
@ -89,6 +117,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
/* defined by default; to change, uncomment and set to the combination you want */
|
||||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
|
|
@ -98,8 +130,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_HELP H
|
||||
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
|
|
@ -107,9 +139,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
|
|
@ -119,9 +150,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_BOOTLOADER B
|
||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
|
|
@ -140,7 +173,63 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/* disable these deprecated features by default */
|
||||
#ifndef LINK_TIME_OPTIMIZATION_ENABLE
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
#endif
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
/*
|
||||
* HD44780 LCD Display Configuration
|
||||
*/
|
||||
/*
|
||||
#define LCD_LINES 2 //< number of visible lines of the display
|
||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
||||
|
||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
||||
|
||||
#if LCD_IO_MODE
|
||||
#define LCD_PORT PORTB //< port for the LCD lines
|
||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
||||
#define LCD_RS_PIN 3 //< pin for RS line
|
||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
||||
#define LCD_RW_PIN 2 //< pin for RW line
|
||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
||||
#define LCD_E_PIN 1 //< pin for Enable line
|
||||
#endif
|
||||
*/
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
// #define BOOTMAGIC_LITE_ROW 0
|
||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
|
|
|||
|
|
@ -1,12 +1,34 @@
|
|||
{
|
||||
"keyboard_name": "LFKPad",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 4,
|
||||
"height": 6,
|
||||
"layouts": {
|
||||
"LAYOUT_numpad_6x4": {
|
||||
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Tab", "x":1, "y":0}, {"label":"=", "x":2, "y":0}, {"label":"Fn", "x":3, "y":0}, {"label":"Num Lock", "x":0, "y":1}, {"label":"/", "x":1, "y":1}, {"label":"*", "x":2, "y":1}, {"label":"-", "x":3, "y":1}, {"label":"7", "x":0, "y":2}, {"label":"8", "x":1, "y":2}, {"label":"9", "x":2, "y":2}, {"label":"4", "x":0, "y":3}, {"label":"5", "x":1, "y":3}, {"label":"6", "x":2, "y":3}, {"label":"+", "x":3, "y":2, "h":2}, {"label":"1", "x":0, "y":4}, {"label":"2", "x":1, "y":4}, {"label":"3", "x":2, "y":4}, {"label":"0", "x":0, "y":5, "w":2}, {"label":".", "x":2, "y":5}, {"label":"Enter", "x":3, "y":4, "h":2}]
|
||||
"keyboard_name": "LFKPad",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 4,
|
||||
"height": 6,
|
||||
"layouts": {
|
||||
"LAYOUT_numpad_6x4": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
{"x":0, "y":1},
|
||||
{"x":1, "y":1},
|
||||
{"x":2, "y":1},
|
||||
{"x":3, "y":1},
|
||||
{"x":0, "y":2},
|
||||
{"x":1, "y":2},
|
||||
{"x":2, "y":2},
|
||||
{"x":0, "y":3},
|
||||
{"x":1, "y":3},
|
||||
{"x":2, "y":3},
|
||||
{"x":3, "y":2, "h":2},
|
||||
{"x":0, "y":4},
|
||||
{"x":1, "y":4},
|
||||
{"x":2, "y":4},
|
||||
{"x":0, "y":5, "w":2},
|
||||
{"x":2, "y":5},
|
||||
{"x":3, "y":4, "h":2}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,3 +0,0 @@
|
|||
#pragma once
|
||||
|
||||
// place overrides here
|
||||
|
|
@ -1,41 +1,31 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_numpad_6x4( /* Base */
|
||||
KC_ESC, KC_TAB, KC_PEQL, MO(1), \
|
||||
KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS, \
|
||||
KC_P7, KC_P8, KC_P9, \
|
||||
KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_P1, KC_P2, KC_P3, \
|
||||
KC_P0, KC_PDOT, KC_PENT \
|
||||
),
|
||||
/* Base */
|
||||
[0] = LAYOUT_numpad_6x4(
|
||||
KC_ESC, KC_TAB, KC_PEQL, MO(1),
|
||||
KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_P7, KC_P8, KC_P9,
|
||||
KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_P1, KC_P2, KC_P3,
|
||||
KC_P0, KC_PDOT, KC_PENT
|
||||
),
|
||||
|
||||
[1] = LAYOUT_numpad_6x4( /* RGB */
|
||||
RGB_SAI, RGB_VAI, RGB_HUI, _______, \
|
||||
RGB_SAD, RGB_VAD, RGB_HUD, _______, \
|
||||
RGB_M_X, RGB_M_G, RGB_MOD, \
|
||||
RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_RMOD, \
|
||||
RGB_M_P, RGB_M_B, RGB_M_R, \
|
||||
XXXXXXX, XXXXXXX, RGB_TOG \
|
||||
),
|
||||
/* RGB */
|
||||
[1] = LAYOUT_numpad_6x4(
|
||||
RGB_SAI, RGB_VAI, RGB_HUI, _______,
|
||||
RGB_SAD, RGB_VAD, RGB_HUD, _______,
|
||||
RGB_M_X, RGB_M_G, RGB_MOD,
|
||||
RGB_M_SW,RGB_M_SN,RGB_M_K, RGB_RMOD,
|
||||
RGB_M_P, RGB_M_B, RGB_M_R,
|
||||
XXXXXXX, XXXXXXX, RGB_TOG
|
||||
)
|
||||
};
|
||||
|
||||
void matrix_init_user(void) {
|
||||
// This keymap only has a single base layer, so reset the default if needed
|
||||
if(eeconfig_read_default_layer() > 1){
|
||||
if (eeconfig_read_default_layer() > 1) {
|
||||
eeconfig_update_default_layer(1);
|
||||
default_layer_set(1);
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1 +1 @@
|
|||
# The default keymap LFKPad 21
|
||||
# The default keymap for the LFKPad 21
|
||||
|
|
|
|||
|
|
@ -1,112 +1,117 @@
|
|||
#include <avr/sfr_defs.h>
|
||||
#include "lfkpad.h"
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#include <avr/timer_avr.h>
|
||||
#include <avr/wdt.h>
|
||||
#include "lfkpad.h"
|
||||
#include "keymap.h"
|
||||
#include "issi.h"
|
||||
#include "TWIlib.h"
|
||||
#include "lighting.h"
|
||||
#include "debug.h"
|
||||
#include "quantum.h"
|
||||
|
||||
uint16_t click_hz = CLICK_HZ;
|
||||
uint16_t click_time = CLICK_MS;
|
||||
uint8_t click_toggle = CLICK_ENABLED;
|
||||
|
||||
|
||||
void matrix_init_kb(void)
|
||||
{
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
|
||||
#ifndef AUDIO_ENABLE
|
||||
// If we're not using the audio pin, drive it low
|
||||
sbi(DDRC, 6);
|
||||
cbi(PORTC, 6);
|
||||
setPinOutput(C6);
|
||||
writePinLow(C6);
|
||||
#endif
|
||||
|
||||
#ifdef ISSI_ENABLE
|
||||
issi_init();
|
||||
#endif
|
||||
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
// This is done after turning the layer LED red, if we're caught in a loop
|
||||
// we should get a flashing red light
|
||||
wdt_enable(WDTO_500MS);
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void)
|
||||
{
|
||||
void matrix_scan_kb(void) {
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
wdt_reset();
|
||||
#endif
|
||||
|
||||
#ifdef ISSI_ENABLE
|
||||
// switch/underglow lighting update
|
||||
static uint32_t issi_device = 0;
|
||||
static uint32_t twi_last_ready = 0;
|
||||
if(twi_last_ready > 1000){
|
||||
// Its been way too long since the last ISSI update, reset the I2C bus and start again
|
||||
|
||||
if (twi_last_ready > 1000) {
|
||||
// It's been way too long since the last ISSI update, reset the I2C bus and start again
|
||||
dprintf("TWI failed to recover, TWI re-init\n");
|
||||
twi_last_ready = 0;
|
||||
TWIInit();
|
||||
force_issi_refresh();
|
||||
}
|
||||
if(isTWIReady()){
|
||||
|
||||
if (isTWIReady()) {
|
||||
twi_last_ready = 0;
|
||||
// If the i2c bus is available, kick off the issi update, alternate between devices
|
||||
update_issi(issi_device, issi_device);
|
||||
if(issi_device){
|
||||
|
||||
if (issi_device) {
|
||||
issi_device = 0;
|
||||
}else{
|
||||
} else {
|
||||
issi_device = 3;
|
||||
}
|
||||
}else{
|
||||
} else {
|
||||
twi_last_ready++;
|
||||
}
|
||||
#endif
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void click(uint16_t freq, uint16_t duration){
|
||||
void click(uint16_t freq, uint16_t duration) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
if(freq >= 100 && freq <= 20000 && duration < 100){
|
||||
if (freq >= 100 && freq <= 20000 && duration < 100) {
|
||||
play_note(freq, 10);
|
||||
for (uint16_t i = 0; i < duration; i++){
|
||||
|
||||
for (uint16_t i = 0; i < duration; i++) {
|
||||
_delay_ms(1);
|
||||
}
|
||||
|
||||
stop_all_notes();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t* record)
|
||||
{
|
||||
if (click_toggle && record->event.pressed){
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
|
||||
if (click_toggle && record->event.pressed) {
|
||||
click(click_hz, click_time);
|
||||
}
|
||||
|
||||
if (keycode == RESET) {
|
||||
reset_keyboard_kb();
|
||||
} else {
|
||||
}
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
|
||||
{
|
||||
void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
int8_t sign = 1;
|
||||
#endif
|
||||
if(id == LFK_ESC_TILDE){
|
||||
|
||||
if (id == LFK_ESC_TILDE) {
|
||||
// Send ~ on shift-esc
|
||||
void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
|
||||
uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
|
||||
if(layer_state == 0){
|
||||
uint8_t shifted = get_mods() & MOD_MASK_SHIFT;
|
||||
|
||||
if (layer_state == 0) {
|
||||
method(shifted ? KC_GRAVE : KC_ESCAPE);
|
||||
}else{
|
||||
} else {
|
||||
method(shifted ? KC_ESCAPE : KC_GRAVE);
|
||||
}
|
||||
send_keyboard_report();
|
||||
}else if(event->event.pressed){
|
||||
switch(id){
|
||||
} else if (event->event.pressed) {
|
||||
switch (id) {
|
||||
case LFK_SET_DEFAULT_LAYER:
|
||||
// set/save the current base layer to eeprom, falls through to LFK_CLEAR
|
||||
eeconfig_update_default_layer(1UL << opt);
|
||||
|
|
@ -117,24 +122,24 @@ void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
|
|||
break;
|
||||
#ifdef AUDIO_ENABLE
|
||||
case LFK_CLICK_FREQ_LOWER:
|
||||
sign = -1; // continue to next statement
|
||||
sign = -1; // continue to next statement
|
||||
case LFK_CLICK_FREQ_HIGHER:
|
||||
click_hz += sign * 100;
|
||||
click(click_hz, click_time);
|
||||
break;
|
||||
case LFK_CLICK_TOGGLE:
|
||||
if(click_toggle){
|
||||
if (click_toggle) {
|
||||
click_toggle = 0;
|
||||
click(4000, 100);
|
||||
click(1000, 100);
|
||||
}else{
|
||||
} else {
|
||||
click_toggle = 1;
|
||||
click(1000, 100);
|
||||
click(4000, 100);
|
||||
}
|
||||
break;
|
||||
case LFK_CLICK_TIME_SHORTER:
|
||||
sign = -1; // continue to next statement
|
||||
sign = -1; // continue to next statement
|
||||
case LFK_CLICK_TIME_LONGER:
|
||||
click_time += sign;
|
||||
click(click_hz, click_time);
|
||||
|
|
@ -144,22 +149,18 @@ void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
|
|||
}
|
||||
}
|
||||
|
||||
void reset_keyboard_kb(){
|
||||
void reset_keyboard_kb() {
|
||||
#ifdef WATCHDOG_ENABLE
|
||||
MCUSR = 0;
|
||||
wdt_disable();
|
||||
wdt_reset();
|
||||
#endif
|
||||
|
||||
reset_keyboard();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led)
|
||||
{
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
// LFK lighting info
|
||||
const uint8_t rgb_matrices[] = {0, 1};
|
||||
const uint8_t rgb_matrices[] = { 0, 1 };
|
||||
const uint8_t rgb_sequence[] = {
|
||||
32, 1, 2, 3,
|
||||
31, 30, 5, 6,
|
||||
|
|
@ -172,5 +173,4 @@ const uint8_t rgb_sequence[] = {
|
|||
4, 25,
|
||||
13, 24,
|
||||
20
|
||||
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,23 +1,6 @@
|
|||
#ifndef LFKPAD_H
|
||||
#define LFKPAD_H
|
||||
|
||||
/* if the kb.h file exists (because we're running from qmkbuilder) include it */
|
||||
#if __has_include("kb.h")
|
||||
#include "kb.h"
|
||||
#endif
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#include "matrix.h"
|
||||
#include <avr/sfr_defs.h>
|
||||
|
||||
#ifndef cbi
|
||||
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
||||
#endif
|
||||
|
||||
#ifndef sbi
|
||||
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
||||
#endif
|
||||
|
||||
|
||||
typedef struct RGB_Color {
|
||||
uint16_t red;
|
||||
|
|
@ -57,7 +40,6 @@ void click(uint16_t freq, uint16_t duration);
|
|||
// readability
|
||||
#define ___ KC_NO
|
||||
|
||||
|
||||
#define LAYOUT_numpad_6x4( \
|
||||
k00, k01, k02, k03, \
|
||||
k10, k11, k12, k13, \
|
||||
|
|
@ -73,5 +55,3 @@ void click(uint16_t freq, uint16_t duration);
|
|||
{ k40, k41, k42, k43 }, \
|
||||
{ k50, ___, k52, ___ } \
|
||||
}
|
||||
|
||||
#endif //LFKPAD_H
|
||||
|
|
|
|||
|
|
@ -1,28 +1,15 @@
|
|||
bluepad keyboard firmware
|
||||
======================
|
||||
# LFKPad
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
|
||||
For the full Quantum feature list, see [the parent readme.md](/docs/README.md).
|
||||
Hotswap 21-key numpad PCB with USB-C, per-key RGB and underglow.
|
||||
|
||||
## Building
|
||||
* Keyboard Maintainer: QMK community
|
||||
* Hardware Supported: LFKPad HS21 PCB
|
||||
* Hardware Availability: [LFKeyboards](https://www.lfkeyboards.com/lfkpad/)
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/bluepad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||
make lfkeyboards/lfkpad:default
|
||||
|
||||
### Default
|
||||
|
||||
To build with the default keymap, simply run `make`.
|
||||
|
||||
### Other Keymaps
|
||||
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
|
||||
|
||||
```
|
||||
$ make keymap=[default|jack|<name>]
|
||||
```
|
||||
|
||||
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
|
|
|||
|
|
@ -11,26 +11,29 @@ MCU = atmega32u4
|
|||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
LAYOUTS = numpad_6x4
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not qmk base
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not qmk base
|
||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
TAP_DANCE_ENABLE = no
|
||||
|
||||
ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled
|
||||
WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms
|
||||
ISSI_ENABLE = yes # If the I2C pullup resistors aren't installed this must be disabled
|
||||
WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan() isn't run every 250ms
|
||||
|
||||
SRC = TWIlib.c issi.c lighting.c
|
||||
|
||||
|
|
@ -41,3 +44,5 @@ endif
|
|||
ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
|
||||
TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
|
||||
endif
|
||||
|
||||
LAYOUTS = numpad_6x4
|
||||
|
|
|
|||
Loading…
Reference in New Issue