Change README Makefile and config.h in hhkb
tmk
parent
daa4a4235f
commit
e7c2af78b7
|
|
@ -57,7 +57,9 @@ CONFIG_H = config.h
|
|||
|
||||
|
||||
# MCU name
|
||||
# PJRC Teensy++ 2.0
|
||||
#MCU = at90usb1286
|
||||
# TMK Alt Controller or PJRC Teensy 2.0
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
|
|
@ -100,7 +102,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# Atmel DFU loader 4096 (TMK Alt Controller)
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
|
@ -8,7 +8,6 @@ See [this thread][AltController] in geekhack.org.
|
|||
|
||||
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
|
||||
[AltController]: http://geekhack.org/index.php?topic=12047.0
|
||||
[Teensy]: http://www.pjrc.com/teensy/
|
||||
|
||||
|
||||
##Features
|
||||
|
|
@ -22,8 +21,8 @@ See README of [tmk_keyboard] for more.
|
|||
[tmk_keyboard]: http://github.com/tmk/tmk_keyboard
|
||||
|
||||
###Pros
|
||||
* No risk: Everything is all reversible
|
||||
* Without PCB trace cutting, case mod or any destructives
|
||||
* No risks: Everything is all reversible
|
||||
* No need for PCB trace patching, case cutting or any other destructive mod
|
||||
* Can keep original controller intact
|
||||
* Can change all HHKB behaviour as you like
|
||||
|
||||
|
|
@ -41,61 +40,35 @@ See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HH
|
|||
|
||||
|
||||
##Build Firmware & Program
|
||||
You can choose some combination of hardware and USB protocol stack([LUFA], [PJRC]).
|
||||
See [this document](../../doc/build.md) first.
|
||||
|
||||
### Install Tools
|
||||
See [this document](../../doc/build.md).
|
||||
### Configuration
|
||||
Set `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`.
|
||||
|
||||
### TMK Alt Controller Board
|
||||
$ make -f Makefile.tmk
|
||||
### Build
|
||||
Just run make after intall tools.
|
||||
|
||||
This programs the controller with [dfu-programmer] if the tool is intalled and configured properly.
|
||||
$ make
|
||||
|
||||
$ make -f Makefile.tmk dfu
|
||||
|
||||
Push reset button and program with [FLIP]. The tool should be intalled and configured properly.
|
||||
|
||||
$ make -f Makefile.tmk flip
|
||||
|
||||
Or you can also program with FLIP GUI.
|
||||
|
||||
[dfu-programmer]: http://dfu-programmer.sourceforge.net/
|
||||
[FLIP]: http://www.atmel.com/tools/FLIP.aspx
|
||||
|
||||
|
||||
### PJRC Teensy++
|
||||
Build with [LUFA] USB stack:
|
||||
|
||||
$ make -f Makefile.lufa
|
||||
|
||||
or with [PJRC] USB stack:
|
||||
Use `Makefile.pjrc` if you want to use PJRC stack instead of LUFA.(LUFA is recommended.)
|
||||
|
||||
$ make -f Makefile.pjrc
|
||||
|
||||
Push reset button and program with [Teensy Loader(command line)]. The tool should be intalled and configured properly.
|
||||
|
||||
$ make -f Makefile.lufa teensy
|
||||
$ make -f Makefile.pjrc teensy
|
||||
|
||||
Or you can also program with [Teensy Loader(GUI)].
|
||||
|
||||
[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
|
||||
[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
|
||||
[Teensy Loader(command line)]: http://www.pjrc.com/teensy/loader_cli.html
|
||||
[Teensy Loader(GUI)]: http://www.pjrc.com/teensy/loader.html
|
||||
|
||||
|
||||
###AVR Mega with [V-USB]
|
||||
Build:
|
||||
Use `Makefile.vusb` for [V-USB] controller.(not supported actively any more.)
|
||||
$ make -f Makefile.vusb
|
||||
|
||||
Program [USBaspLoader] on MCU with AVR programmer like [AVRISPmkII] and tool like [avrdude].
|
||||
### Program
|
||||
First, push reset button on board to start bootloader.
|
||||
|
||||
You can programs with [avrdude] once you have programmed [USBaspLoader] on MCU.
|
||||
$ make -f Makefile.vusb program
|
||||
This command programs the controller with [dfu-programmer] if the tool is intalled and configured properly.
|
||||
|
||||
[AVRISPmkII]: http://www.atmel.com/tools/AVRISPMKII.aspx
|
||||
[avrdude]: http://www.nongnu.org/avrdude/
|
||||
$ make dfu
|
||||
|
||||
Or you can also use [FLIP] command to program. Also the tool should be intalled and configured properly. FLIP GUI app is also available.
|
||||
|
||||
$ make flip
|
||||
|
||||
Use [Teensy Loader] if your controller is Teensy/Teensy++.
|
||||
|
||||
|
||||
##How to Customize
|
||||
|
|
@ -103,7 +76,7 @@ See [tmk_keyboard] documents.
|
|||
|
||||
|
||||
##Hardware
|
||||
You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with V-USB library is also cheapear option for DIY.
|
||||
You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with [V-USB] library is also cheapear option for DIY.
|
||||
|
||||
###1. TMK Alt Controller Board
|
||||
TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://github.com/tmk/HHKB_controller).
|
||||
|
|
@ -127,7 +100,6 @@ See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923).
|
|||
+---------------+
|
||||
|
||||
- NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/)
|
||||
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
|
||||
|
||||
###3. V-USB connection
|
||||
+---+ +---------------+
|
||||
|
|
@ -156,5 +128,11 @@ See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923).
|
|||
- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack.
|
||||
- NOTE: [USBaspLoader] is very useful for firmware update.
|
||||
|
||||
|
||||
[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
|
||||
[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
|
||||
[dfu-programmer]: http://dfu-programmer.sourceforge.net/
|
||||
[FLIP]: http://www.atmel.com/tools/FLIP.aspx
|
||||
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
|
||||
[V-USB]: http://www.obdev.at/products/vusb/index.html
|
||||
[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
|
||||
|
|
|
|||
|
|
@ -31,27 +31,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/*
|
||||
* Boot magic keys
|
||||
* call some function by pressing key when pluging cable or powering on.
|
||||
*/
|
||||
/* key position on matrix(ROW:COL) */
|
||||
#define KEY_FN 0x54
|
||||
#define KEY_D 0x14
|
||||
#define KEY_IS_ON(key) matrix_is_on((key)>>4, (key)&0xF)
|
||||
/* kick up bootloader */
|
||||
#define IS_BOOTMAGIC_BOOTLOADER() KEY_IS_ON(KEY_FN)
|
||||
/* debug on */
|
||||
#define IS_BOOTMAGIC_DEBUG() KEY_IS_ON(KEY_D)
|
||||
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||
|
||||
/* mouse keys */
|
||||
#ifdef MOUSEKEY_ENABLE
|
||||
# define MOUSEKEY_DELAY_TIME 100
|
||||
#endif
|
||||
|
||||
/* period of tapping(ms) */
|
||||
#define TAPPING_TERM 300
|
||||
|
|
@ -62,11 +45,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
/* Boot Magic salt key: Space */
|
||||
#define BOOTMAGIC_KEY_SALT KC_FN6
|
||||
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue