Refactor f103,f072,f042 based keyboards to use new MCU selection defaults (#7705)
* refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072' * refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042' * refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103'master
parent
5a02cc00a4
commit
e34af631c2
|
@ -1,39 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
# SRC = ssd1306.c
|
MCU = STM32F072
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Options to pass to dfu-util when flashing
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
DFU_SUFFIX_ARGS = -p df11 -v 0483
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
|
|
@ -1,37 +1,5 @@
|
||||||
## chip/board settings
|
# MCU name
|
||||||
# - the next two should match the directories in
|
MCU = STM32F072
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
|
|
||||||
# Linker script to use
|
|
||||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
|
|
||||||
# Startup code to use
|
|
||||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
|
|
||||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
|
|
||||||
# Cortex version
|
|
||||||
MCU = cortex-m0
|
|
||||||
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
|
|
||||||
# Vector table for application
|
|
||||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
|
||||||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
|
||||||
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
|
|
||||||
OPT_DEFS =
|
|
||||||
|
|
||||||
# Options to pass to dfu-util when flashing
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
|
|
@ -1,35 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
# SRC = ssd1306.c
|
MCU = STM32F072
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
@ -40,8 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
|
||||||
SRC = keyboard.c \
|
SRC = keyboard.c \
|
||||||
led.c
|
led.c
|
||||||
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
|
|
|
@ -1,35 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
# SRC = ssd1306.c
|
MCU = STM32F072
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
@ -40,8 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
|
||||||
SRC = keyboard.c \
|
SRC = keyboard.c \
|
||||||
led.c
|
led.c
|
||||||
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
|
|
|
@ -1,39 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
# SRC = ssd1306.c
|
MCU = STM32F072
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Options to pass to dfu-util when flashing
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
|
|
@ -1,35 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
# SRC = ssd1306.c
|
MCU = STM32F072
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
@ -40,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
|
||||||
SRC = keyboard.c \
|
SRC = keyboard.c \
|
||||||
led.c
|
led.c
|
||||||
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
DFU_SUFFIX_ARGS = -v 0483 -p DF11
|
|
||||||
|
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
|
|
|
@ -1,46 +1,18 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
VPATH += keyboards/cannonkeys/bluepill
|
MCU = STM32F103
|
||||||
SRC = led.c \
|
|
||||||
keyboard.c
|
|
||||||
|
|
||||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||||
BOARD = GENERIC_STM32_F103
|
BOARD = GENERIC_STM32_F103
|
||||||
|
|
||||||
# OPT_DEFS =
|
DFU_ARGS = -d 1eaf:0003 -a2 -R
|
||||||
# MCU_LDSCRIPT = STM32F103x8
|
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
|
||||||
# BOARD = GENERIC_STM32_F103
|
|
||||||
|
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F1xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f1xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m3
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 7
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
|
# project specific files
|
||||||
|
VPATH += keyboards/cannonkeys/bluepill
|
||||||
|
SRC = led.c \
|
||||||
|
keyboard.c
|
||||||
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
|
|
|
@ -1,46 +1,18 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
VPATH += keyboards/cannonkeys/bluepill
|
MCU = STM32F103
|
||||||
SRC = led.c \
|
|
||||||
keyboard.c
|
|
||||||
|
|
||||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||||
BOARD = GENERIC_STM32_F103
|
BOARD = GENERIC_STM32_F103
|
||||||
|
|
||||||
# OPT_DEFS =
|
DFU_ARGS = -d 1eaf:0003 -a2 -R
|
||||||
# MCU_LDSCRIPT = STM32F103x8
|
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
|
||||||
# BOARD = GENERIC_STM32_F103
|
|
||||||
|
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F1xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f1xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m3
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 7
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
|
# project specific files
|
||||||
|
VPATH += keyboards/cannonkeys/bluepill
|
||||||
|
SRC = led.c \
|
||||||
|
keyboard.c
|
||||||
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
|
|
|
@ -1,47 +1,18 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
VPATH += keyboards/cannonkeys/bluepill
|
MCU = STM32F103
|
||||||
SRC = led.c \
|
|
||||||
keyboard.c
|
|
||||||
|
|
||||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||||
BOARD = GENERIC_STM32_F103
|
BOARD = GENERIC_STM32_F103
|
||||||
|
|
||||||
# OPT_DEFS =
|
DFU_ARGS = -d 1eaf:0003 -a2 -R
|
||||||
# MCU_LDSCRIPT = STM32F103x8
|
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
|
||||||
# BOARD = GENERIC_STM32_F103
|
|
||||||
|
|
||||||
## chip/board settings
|
# project specific files
|
||||||
# the next two should match the directories in
|
VPATH += keyboards/cannonkeys/bluepill
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
SRC = led.c \
|
||||||
MCU_FAMILY = STM32
|
keyboard.c
|
||||||
MCU_SERIES = STM32F1xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f1xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m3
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 7
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
DFU_ARGS = -d 1eaf:0003 -a 2 -R
|
|
||||||
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
|
|
|
@ -1,46 +1,18 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
VPATH += keyboards/cannonkeys/bluepill
|
MCU = STM32F103
|
||||||
SRC = led.c \
|
|
||||||
keyboard.c
|
|
||||||
|
|
||||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||||
BOARD = GENERIC_STM32_F103
|
BOARD = GENERIC_STM32_F103
|
||||||
|
|
||||||
# OPT_DEFS =
|
DFU_ARGS = -d 1eaf:0003 -a2 -R
|
||||||
# MCU_LDSCRIPT = STM32F103x8
|
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
|
||||||
# BOARD = GENERIC_STM32_F103
|
|
||||||
|
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F1xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f1xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m3
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 7
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
|
# project specific files
|
||||||
|
VPATH += keyboards/cannonkeys/bluepill
|
||||||
|
SRC = led.c \
|
||||||
|
keyboard.c
|
||||||
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
|
|
|
@ -1,46 +1,18 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
VPATH += keyboards/cannonkeys/bluepill
|
MCU = STM32F103
|
||||||
SRC = led.c \
|
|
||||||
keyboard.c
|
|
||||||
|
|
||||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||||
BOARD = GENERIC_STM32_F103
|
BOARD = GENERIC_STM32_F103
|
||||||
|
|
||||||
# OPT_DEFS =
|
DFU_ARGS = -d 1eaf:0003 -a2 -R
|
||||||
# MCU_LDSCRIPT = STM32F103x8
|
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
|
||||||
# BOARD = GENERIC_STM32_F103
|
|
||||||
|
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F1xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f1xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m3
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 7
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
|
# project specific files
|
||||||
|
VPATH += keyboards/cannonkeys/bluepill
|
||||||
|
SRC = led.c \
|
||||||
|
keyboard.c
|
||||||
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
|
|
|
@ -1,35 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
# SRC = ssd1306.c
|
MCU = STM32F072
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
|
|
@ -1,35 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
# SRC = ssd1306.c
|
MCU = STM32F072
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
@ -40,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
|
||||||
SRC = keyboard.c \
|
SRC = keyboard.c \
|
||||||
led.c
|
led.c
|
||||||
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
DFU_SUFFIX_ARGS = -v 0483 -p DF11
|
|
||||||
|
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
|
|
|
@ -1,43 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
# SRC = ssd1306.c
|
MCU = STM32F072
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
|
|
||||||
# Options to pass to dfu-util when flashing
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
@ -48,9 +10,6 @@ VPATH += keyboards/cannonkeys/stm32f072
|
||||||
SRC = keyboard.c \
|
SRC = keyboard.c \
|
||||||
led.c
|
led.c
|
||||||
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
DFU_SUFFIX_ARGS = -v 0483 -p DF11
|
|
||||||
|
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
|
|
|
@ -1,43 +1,15 @@
|
||||||
SRC = matrix.c
|
# MCU name
|
||||||
|
MCU = STM32F103
|
||||||
|
|
||||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||||
BOARD = GENERIC_STM32_F103
|
BOARD = GENERIC_STM32_F103
|
||||||
|
|
||||||
# OPT_DEFS =
|
DFU_ARGS = -d 1eaf:0003 -a2 -R
|
||||||
# MCU_LDSCRIPT = STM32F103x8
|
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
|
||||||
# BOARD = GENERIC_STM32_F103
|
|
||||||
|
|
||||||
## chip/board settings
|
SRC = matrix.c
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F1xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f1xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m3
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 7
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
DFU_ARGS = -d 1eaf:0003 -a 2
|
|
||||||
|
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
|
|
|
@ -1,37 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
# SRC = matrix.c \
|
MCU = STM32F072
|
||||||
# led.c
|
|
||||||
|
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
|
|
@ -1,41 +1,10 @@
|
||||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
# MCU name
|
||||||
BOARD = GENERIC_STM32_F103
|
MCU = STM32F103
|
||||||
|
|
||||||
|
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||||
|
BOARD = GENERIC_STM32_F103
|
||||||
|
|
||||||
DFU_ARGS = -d 1eaf:0003 -a2 -R
|
DFU_ARGS = -d 1eaf:0003 -a2 -R
|
||||||
DFU_SUFFIX_ARGS ?= -v 1eaf -p 0003
|
DFU_SUFFIX_ARGS = -v 1eaf -p 0003
|
||||||
|
|
||||||
# OPT_DEFS =
|
|
||||||
# MCU_LDSCRIPT = STM32F103x8
|
|
||||||
# BOARD = GENERIC_STM32_F103
|
|
||||||
|
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F1xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f1xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m3
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 7
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
|
@ -1,34 +1,2 @@
|
||||||
## chip/board settings
|
# MCU name
|
||||||
# the next two should match the directories in
|
MCU = STM32F072
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Options to pass to dfu-util when flashing
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
DFU_SUFFIX_ARGS = -p df11 -v 0483
|
|
||||||
|
|
|
@ -1,38 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
|
MCU = STM32F042
|
||||||
## chip/board settings
|
|
||||||
# - the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
|
|
||||||
# Linker script to use
|
|
||||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F042x6
|
|
||||||
|
|
||||||
# Startup code to use
|
|
||||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
|
|
||||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = GENERIC_STM32_F042X6
|
|
||||||
|
|
||||||
# Cortex version
|
|
||||||
MCU = cortex-m0
|
|
||||||
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
|
|
||||||
# Vector table for application
|
|
||||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
|
||||||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
|
||||||
#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
|
|
||||||
OPT_DEFS =
|
|
||||||
|
|
||||||
# Options to pass to dfu-util when flashing
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
|
|
@ -1,35 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
# SRC = ssd1306.c
|
MCU = STM32F072
|
||||||
## chip/board settings
|
|
||||||
# the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
@ -51,4 +21,5 @@ CUSTOM_MATRIX = no # Custom matrix file
|
||||||
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
|
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
|
||||||
RGBLIGHT_ENABLE = yes
|
RGBLIGHT_ENABLE = yes
|
||||||
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
# RAW_ENABLE = yes
|
||||||
|
# DYNAMIC_KEYMAP_ENABLE = yes
|
||||||
|
|
|
@ -1,37 +1,5 @@
|
||||||
## chip/board settings
|
# MCU name
|
||||||
# the next two should match the directories in
|
MCU = STM32F072
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
# linker script to use
|
|
||||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F072xB
|
|
||||||
# startup code to use
|
|
||||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
# it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = ST_STM32F072B_DISCOVERY
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m0
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
||||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
||||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
||||||
# a custom board definition that you plan to reuse).
|
|
||||||
# If you're not setting it here, leave it commented out.
|
|
||||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
||||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
||||||
# This also requires a patch to chibios:
|
|
||||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
||||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
||||||
|
|
||||||
# Options to pass to dfu-util when flashing
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
DFU_SUFFIX_ARGS = -p df11 -v 0483
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
|
|
|
@ -1,39 +1,5 @@
|
||||||
# project specific files
|
# MCU name
|
||||||
|
MCU = STM32F042
|
||||||
## chip/board settings
|
|
||||||
# - the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
MCU_FAMILY = STM32
|
|
||||||
MCU_SERIES = STM32F0xx
|
|
||||||
|
|
||||||
# Linker script to use
|
|
||||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
MCU_LDSCRIPT = STM32F042x6
|
|
||||||
|
|
||||||
# Startup code to use
|
|
||||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
MCU_STARTUP = stm32f0xx
|
|
||||||
|
|
||||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
BOARD = GENERIC_STM32_F042X6
|
|
||||||
|
|
||||||
# Cortex version
|
|
||||||
MCU = cortex-m0
|
|
||||||
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
ARMV = 6
|
|
||||||
|
|
||||||
# Vector table for application
|
|
||||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
|
||||||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
|
||||||
#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
|
|
||||||
OPT_DEFS =
|
|
||||||
|
|
||||||
# Options to pass to dfu-util when flashing
|
|
||||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
|
||||||
DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
|
|
Loading…
Reference in New Issue