g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

changes needed for a ISO satan PCB including a split right-shift key

daktil_manuform
Toni 2016-07-17 14:57:56 +02:00
parent 9ecf9073b9
commit de96513ff2
7 changed files with 440 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

70
keyboards/satan/keymaps/iso_split_rshift/Makefile 100644
View File

@ -0,0 +1,70 @@
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870)
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
MIDI_ENABLE ?= no # MIDI controls
AUDIO_ENABLE = no
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

17
keyboards/satan/keymaps/iso_split_rshift/build.sh 100755
View File

@ -0,0 +1,17 @@
#!/bin/bash
# adjust for cpu
# -j 16 gave best result on a hyperthreaded quad core core i7
THREADS="-j 16"
echo "We need sudo later"
sudo ls 2>&1 /dev/null
make clean
make KEYMAP=toni77 ${THREADS}
if [[ $? -eq 0 ]]
then
echo "please trigger flashing! you have 5 seconds"
sleep 5
sudo make KEYMAP=toni77 dfu ${THREADS}
else
echo "make failed"
exit 77
fi

31
keyboards/satan/keymaps/iso_split_rshift/config.h 100644
View File

@ -0,0 +1,31 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
#define RGB_DI_PIN B2
#define RGBLIGHT_TIMER
#define RGBLED_NUM 8 // Number of LEDs
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
#endif

192
keyboards/satan/keymaps/iso_split_rshift/keymap.c 100644
View File

@ -0,0 +1,192 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
// this is the style you want to emulate.
#include "satan.h"
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _DEF 0
#define _SPC 1
#define _TAB 2
#define _SFX 3
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _DEF: Default Layer
* ,-----------------------------------------------------------.-------------------------------------
* |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
* |-----------------------------------------------------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 !!
* |-----------------------------------------------------------|
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return |
* |-----------------------------------------------------------|
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP
* |-----------------------------------------------------------|
* |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is
* `-----------------------------------------------------------' LEFT DWN RIGHT
*/
[_DEF] = KEYMAP_ISO_SPLITRSHIFT(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
F(2), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, F(17), \
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX),F(4), \
KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, F(5), F(6), F(7)) ,
/* Keymap 1: F-and-vim Layer, modified with Space (Fn0)
* ,-----------------------------------------------------------.-----------------------------------------
* |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
* |-----------------------------------------------------------|
* | |Paus| Up| | | | | | | | | | | |
* |-----------------------------------------------------------|
* | |Lft|Dwn|Rgt| | | |Left|Down|Right|Up| | PLAY |
* |-----------------------------------------------------------|
* | | | | | | |M0 | | | | | Vol+ | |
* |-----------------------------------------------------------|
* | | | | |Alt |Prev|Vol-|Next|
* `-----------------------------------------------------------'
*/
[_SPC] = KEYMAP_ISO_SPLITRSHIFT(
KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
KC_TRNS, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT) ,
/* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (Fn1)
* ,-----------------------------------------------------------.-----------------------------------------
* |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE
* |-----------------------------------------------------------|
* | | | | | | | | | | | | | | |
* |-----------------------------------------------------------|
* | | | | | | | |Pos1|PgDn|PgUp|End| |Retrn |
* |-----------------------------------------------------------|
* | | | | | | |AF2| | | | | PgUp | |
* |-----------------------------------------------------------|
* | | | | |Alt |Pos1|PgDn|End |
* `-----------------------------------------------------------'
*/
[_TAB] = KEYMAP_ISO_SPLITRSHIFT(
KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END) ,
/* Keymap 3: Split right shift Numpad toggle Layer (Fn2)
* ,-----------------------------------------------------------.-----------------------------------------
* |RSET| | | | | | | 7| 8| 9| | | |Backsp |
* |-----------------------------------------------------------|
* | | | | | | | | 4 | 5 | 6 | | | | \ |
* |-----------------------------------------------------------|
* | | L | L | | | | | 1 | 2 | 3 | | | Return |
* |-----------------------------------------------------------|
* | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent
* |-----------------------------------------------------------| LED controlling
* |Ctrl|Win |Alt | |Alt |Left|Down|Right|
* `-----------------------------------------------------------'
*/
[_SFX] = KEYMAP_ISO_SPLITRSHIFT(
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \
KC_TRNS, F(9), F(10), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_NO, KC_ENT, \
KC_TRNS, F(11), F(12), F(13), F(14), F(15), F(16), KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT) ,
};
enum function_id {
LAUNCH,
RGBLED_TOGGLE,
RGBLED_STEP_MODE,
RGBLED_INCREASE_HUE,
RGBLED_DECREASE_HUE,
RGBLED_INCREASE_SAT,
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL,
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_LAYER_TAP_KEY(_SPC, KC_SPACE),
[1] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
[2] = ACTION_LAYER_TAP_KEY(_TAB, KC_TAB),
[3] = ACTION_LAYER_TOGGLE(_SFX),
[4] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
[5] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
[6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
[7] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
[8] = ACTION_FUNCTION(LAUNCH),
[9] = ACTION_FUNCTION(RGBLED_TOGGLE),
[10] = ACTION_FUNCTION(RGBLED_STEP_MODE),
[11] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
[12] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
[13] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
[14] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
[15] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
[16] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
[17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
return (record->event.pressed ?
MACRO( D(RALT), T(SPC), U(RALT), END )
:MACRO( END ));
break;
case 1:
return (record->event.pressed ?
MACRO( D(LALT), T(F2), U(LALT), END )
:MACRO( END ));
break;
}
return MACRO_NONE;
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
switch (id) {
case RGBLED_TOGGLE:
//led operations
if (record->event.pressed) {
rgblight_toggle();
}
break;
case RGBLED_INCREASE_HUE:
if (record->event.pressed) {
rgblight_increase_hue();
}
break;
case RGBLED_DECREASE_HUE:
if (record->event.pressed) {
rgblight_decrease_hue();
}
break;
case RGBLED_INCREASE_SAT:
if (record->event.pressed) {
rgblight_increase_sat();
}
break;
case RGBLED_DECREASE_SAT:
if (record->event.pressed) {
rgblight_decrease_sat();
}
break;
case RGBLED_INCREASE_VAL:
if (record->event.pressed) {
rgblight_increase_val();
}
break;
case RGBLED_DECREASE_VAL:
if (record->event.pressed) {
rgblight_decrease_val();
}
break;
case RGBLED_STEP_MODE:
if (record->event.pressed) {
rgblight_step();
}
break;
}
}

4
keyboards/satan/keymaps/iso_split_rshift/resetboard.sh 100755
View File

@ -0,0 +1,4 @@
#!/bin/bash
sudo dfu-programmer atmega32u4 erase --force
sudo dfu-programmer atmega32u4 flash clear_flash.hex
sudo dfu-programmer atmega32u4 reset

30
keyboards/satan/keymaps/iso_split_rshift/satan.c 100644
View File

@ -0,0 +1,30 @@
#include "satan.h"
#include "led.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
led_init_ports();
};
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
};
void led_init_ports(void) {
// * Set our LED pins as output
DDRB |= (1<<2);
}
void led_set_kb(uint8_t usb_led) {
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// Turn capslock on
PORTB &= ~(1<<2);
} else {
// Turn capslock off
PORTB |= (1<<2);
}
}

96
keyboards/satan/keymaps/iso_split_rshift/satan.h 100644
View File

@ -0,0 +1,96 @@
#ifndef SATAN_H
#define SATAN_H
#include "../../../../quantum/quantum.h"
/* Clueboard matrix layout
* ,-----------------------------------------------------------.
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
* |-----------------------------------------------------------|
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
* |-----------------------------------------------------------|
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d |
* |-----------------------------------------------------------|
* | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d |
* |-----------------------------------------------------------|
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
* `-----------------------------------------------------------'
*/
// The first section contains all of the arguments
// The second converts the arguments into a two-dimensional array
#define KEYMAP( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d}, \
{k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3d}, \
{k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d} \
}
/* Satan HHKB matrix layout
* ,------------------------------------------------------------.
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 |
* |------------------------------------------------------------|
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
* |------------------------------------------------------------|
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d |
* |------------------------------------------------------------|
* | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c |
* |------------------------------------------------------------|
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
* `------------------------------------------------------------'
*/
#define KEYMAP_HHKB( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d}, \
{k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
{k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k4a, k4b, k4c, k4d} \
}
/* ISO w/ split right shift key matrix layout
* ,-----------------------------------------------------------.
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
* |-----------------------------------------------------------|
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
* |-----------------------------------------------------------|
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
* |-----------------------------------------------------------|
* | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c| 3d |
* |-----------------------------------------------------------|
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
* `-----------------------------------------------------------'
*/
#define KEYMAP_ISO_SPLITRSHIFT( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
k40, k41, k42, k45, k4a, k4b, k4c, k4d \
) \
{ \
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
{k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d} \
}
void matrix_init_user(void);
void matrix_scan_user(void);
#endif