Move matrix config to info.json, part 2 (#19987)
parent
80661e5f19
commit
dd086a51d8
|
@ -20,11 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#define RGBLED_NUM 16
|
||||
|
||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
|
||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5 }
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGBLIGHT_EFFECT_BREATHING
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x422D",
|
||||
"device_version": "2.0.0"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "C7", "C6", "C5"],
|
||||
"rows": ["B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"backlight": {
|
||||
"pin": "D4"
|
||||
},
|
||||
|
|
|
@ -15,16 +15,6 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
|
||||
/* key matrix pins
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B1, B2, B3, C6, C7 }
|
||||
#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6, D4, D5, D3 }
|
||||
|
||||
/* COL2ROW or ROW2COL
|
||||
*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* IS31FL3731 driver address (for status LEDs)
|
||||
* Using the default defines here, but using a custom implementation
|
||||
*/
|
||||
|
|
|
@ -7,6 +7,11 @@
|
|||
"pid": "0xBFFA",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["E6", "F0", "F1", "F4", "F5", "F6", "F7", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
|
||||
"rows": ["B1", "B2", "B3", "C6", "C7"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"community_layouts": ["alice", "alice_split_bs"],
|
||||
|
|
|
@ -25,11 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 16
|
||||
|
||||
// #define MATRIX_ROW_PINS { B0, B2, B4, B5, B6 }
|
||||
// #define MATRIX_COL_PINS { F5, B1, F0, F1, F4, B3, D7, D6, D4, D5, D3, D2, D1, D0 }
|
||||
|
||||
//#define DIODE_DIRECTION
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
|
|
|
@ -1,23 +0,0 @@
|
|||
/* Copyright 2021 Swiftrax <swiftrax@gmail.com>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
|
||||
/* default pinout */
|
||||
#define MATRIX_ROW_PINS { D5, D3, D2, D1, D0 }
|
||||
#define MATRIX_COL_PINS { B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0, E6, B0, B1, B2, B3 }
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0xE965",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["B4", "B5", "B6", "C6", "C7", "F7", "F6", "F5", "F4", "F1", "F0", "E6", "B0", "B1", "B2", "B3"],
|
||||
"rows": ["D5", "D3", "D2", "D1", "D0"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"community_layouts": ["65_ansi_blocker", "65_ansi_blocker_split_bs", "65_iso_blocker", "65_iso_blocker_split_bs"],
|
||||
|
|
|
@ -17,14 +17,6 @@
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1, F0 }
|
||||
#define MATRIX_COL_PINS { E6, B0, B1, B2, B3, B7, D2, D3, D5, D4, D6, D7, B4, B5, B6, E2 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
|
||||
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1226",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["E6", "B0", "B1", "B2", "B3", "B7", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "E2"],
|
||||
"rows": ["F7", "F6", "F5", "F4", "F1", "F0"]
|
||||
},
|
||||
"diode_direction": "ROW2COL",
|
||||
"encoder": {
|
||||
"rotary": [
|
||||
{"pin_a": "C6", "pin_b": "C7", "resolution": 2}
|
||||
|
|
|
@ -17,13 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
// 0 , 1 , 2 , 3 , 4 , 5
|
||||
#define MATRIX_ROW_PINS { B4, E6, D7, B5, C6, F6}
|
||||
#define MATRIX_COL_PINS { F7, B1, B3, B2, B6}
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
#define RGB_DI_PIN D4
|
||||
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0002",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F7", "B1", "B3", "B2", "B6"],
|
||||
"rows": ["B4", "E6", "D7", "B5", "C6", "F6"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"encoder": {
|
||||
"rotary": [
|
||||
{"pin_a": "F4", "pin_b": "F5"}
|
||||
|
|
|
@ -1,27 +0,0 @@
|
|||
/*
|
||||
Copyright 2021 Swiftrax <swiftrax@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
|
||||
// ROWS: Top to bottom, COLS: Left to right
|
||||
|
||||
#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 }
|
||||
#define MATRIX_COL_PINS { D2, D1, D0, B7, B3, B2, F0, F1, F4, F5, F6, F7 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0xE96C",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["D2", "D1", "D0", "B7", "B3", "B2", "F0", "F1", "F4", "F5", "F6", "F7"],
|
||||
"rows": ["B5", "B4", "D7", "D6", "D4"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"encoder": {
|
||||
"rotary": [
|
||||
{"pin_a": "D3", "pin_b": "D5"},
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*å
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { B0, F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0014",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6", "C6"],
|
||||
"rows": ["B0", "F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"layouts": {
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*å
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0010",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6", "C6"],
|
||||
"rows": ["F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"indicators": {
|
||||
"caps_lock": "C7"
|
||||
},
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*å
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { B0, F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0015",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["B0", "F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6", "C6"],
|
||||
"rows": ["F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"indicators": {
|
||||
"caps_lock": "C7"
|
||||
},
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1001",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6", "C6"],
|
||||
"rows": ["F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"indicators": {
|
||||
"caps_lock": "C7"
|
||||
},
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0099",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6", "C6"],
|
||||
"rows": ["F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"community_layouts": ["65_ansi"],
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F1, F0, F6, F5, F4 }
|
||||
#define MATRIX_COL_PINS { C7, B1, B2, B3, B7, D0, D1, D2, D3, D5, D4, D6, D7, B4, B5 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0001",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["C7", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5"],
|
||||
"rows": ["F1", "F0", "F6", "F5", "F4"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"community_layouts": ["65_ansi_blocker"],
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*å
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { B4, B5, B6, C0, E1, E0 }
|
||||
#define MATRIX_COL_PINS { F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, A6, A7, D5, D6, D7 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0006",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F2", "F3", "F4", "F5", "F6", "F7", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "D5", "D6", "D7"],
|
||||
"rows": ["B4", "B5", "B6", "C0", "E1", "E0"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"indicators": {
|
||||
"caps_lock": "C4",
|
||||
"scroll_lock": "C6"
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1012",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6", "C6"],
|
||||
"rows": ["F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"layouts": {
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0002",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6", "C6"],
|
||||
"rows": ["F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"indicators": {
|
||||
"caps_lock": "C7"
|
||||
},
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1002",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6"],
|
||||
"rows": ["F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"indicators": {
|
||||
"caps_lock": "C7"
|
||||
},
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
|
||||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1011",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B3", "B2", "B1"],
|
||||
"rows": ["F0", "F1", "F4", "F5", "F6"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"community_layouts": ["60_ansi"],
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*å
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { B5, B6, C0, E1, E0 }
|
||||
#define MATRIX_COL_PINS { F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, A6, A7, D5, D6, D7 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0020",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F2", "F3", "F4", "F5", "F6", "F7", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "D5", "D6", "D7"],
|
||||
"rows": ["B5", "B6", "C0", "E1", "E0"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "at90usb646",
|
||||
"bootloader": "atmel-dfu",
|
||||
"layouts": {
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x9001",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6"],
|
||||
"rows": ["F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"indicators": {
|
||||
"caps_lock": "C7"
|
||||
},
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
|
||||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1003",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B3", "B2", "B1"],
|
||||
"rows": ["F0", "F1", "F4", "F5", "F6"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"layout_aliases": {
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1022",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6"],
|
||||
"rows": ["F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"indicators": {
|
||||
"caps_lock": "C7"
|
||||
},
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 }
|
||||
#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1023",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "B1", "B2", "B3", "B7", "D0", "D1", "D2", "D3", "D5", "D7", "B4", "B5", "B6"],
|
||||
"rows": ["F4", "F1", "F7", "F6", "F5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"indicators": {
|
||||
"caps_lock": "C7"
|
||||
},
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*å
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { B4, B5, B6, C0, E1, E0 }
|
||||
#define MATRIX_COL_PINS { F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, A6, A7, D5, D6, D7 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0017",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F2", "F3", "F4", "F5", "F6", "F7", "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", "D5", "D6", "D7"],
|
||||
"rows": ["B4", "B5", "B6", "C0", "E1", "E0"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "at90usb646",
|
||||
"bootloader": "atmel-dfu",
|
||||
"layouts": {
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*å
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { B0, B1, C7, C6, B6 }
|
||||
#define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0, B2, B3, B7, B5, B4, D7, D6, D4, D5 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0024",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F7", "F6", "F5", "F4", "F1", "F0", "B2", "B3", "B7", "B5", "B4", "D7", "D6", "D4", "D5"],
|
||||
"rows": ["B0", "B1", "C7", "C6", "B6"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"layouts": {
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
|
||||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1004",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B3", "B2", "B1"],
|
||||
"rows": ["F0", "F1", "F4", "F5", "F6"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"community_layouts": ["60_ansi"],
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
|
||||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1005",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B3", "B2", "B1"],
|
||||
"rows": ["F0", "F1", "F4", "F5", "F6"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"community_layouts": ["60_ansi_arrow"],
|
||||
|
|
|
@ -17,25 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
// Checked with Eagle Schematic
|
||||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
|
||||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1, D1 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1007",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B3", "B2", "B1", "D1"],
|
||||
"rows": ["F0", "F1", "F4", "F5", "F6"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"community_layouts": ["65_ansi"],
|
||||
|
|
|
@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { B5 }
|
||||
#define MATRIX_COL_PINS { B6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
false \
|
||||
|
|
|
@ -7,6 +7,11 @@
|
|||
"pid": "0xB195",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["B6"],
|
||||
"rows": ["B5"]
|
||||
},
|
||||
"diode_direction": "ROW2COL",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "caterina",
|
||||
"debounce": 50,
|
||||
|
|
|
@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F1, F2, F3, F4, F5, F6 }
|
||||
#define MATRIX_COL_PINS { F7, C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, D6, D5, D4, D3, D2, D1, D0, B7 }
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -7,6 +7,11 @@
|
|||
"pid": "0x0000",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F7", "C7", "C6", "C5", "C4", "C3", "C2", "C1", "C0", "E1", "E0", "D7", "D6", "D5", "D4", "D3", "D2", "D1", "D0", "B7"],
|
||||
"rows": ["F1", "F2", "F3", "F4", "F5", "F6"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "at90usb1286",
|
||||
"bootloader": "atmel-dfu",
|
||||
"layouts": {
|
||||
|
|
|
@ -1,13 +1,5 @@
|
|||
#pragma once
|
||||
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { F6, B5, B4, E6, F7 }
|
||||
#define MATRIX_COL_PINS { D1, D0, D4, F5, F4 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x6060",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["D1", "D0", "D4", "F5", "F4"],
|
||||
"rows": ["F6", "B5", "B4", "E6", "F7"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "caterina",
|
||||
"layout_aliases": {
|
||||
|
|
|
@ -1,13 +1,5 @@
|
|||
#pragma once
|
||||
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 }
|
||||
#define MATRIX_COL_PINS { F4, F5, F6, F7 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x5350",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F4", "F5", "F6", "F7"],
|
||||
"rows": ["D1", "D0", "D4", "C6", "D7"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "caterina",
|
||||
"community_layouts": ["ortho_5x4", "numpad_5x4"],
|
||||
|
|
|
@ -15,14 +15,6 @@
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { D1, C6, D4, D0 }
|
||||
#define MATRIX_COL_PINS { F7, B1, D7, E6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x6060",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F7", "B1", "D7", "E6"],
|
||||
"rows": ["D1", "C6", "D4", "D0"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "caterina",
|
||||
"community_layouts": ["ortho_4x4"],
|
||||
|
|
|
@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
|
||||
#define MATRIX_COL_PINS { C7, B6, B3, B5, B4, D7, D4, D5, D3, D2, D1, D0, B7, B0, B1, B2 }
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -7,6 +7,11 @@
|
|||
"pid": "0x6060",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["C7", "B6", "B3", "B5", "B4", "D7", "D4", "D5", "D3", "D2", "D1", "D0", "B7", "B0", "B1", "B2"],
|
||||
"rows": ["F0", "F1", "F4", "F5", "F6", "F7"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"layouts": {
|
||||
|
|
|
@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
|
||||
#define MATRIX_COL_PINS { D3, D1, D0, D4, C6, D7, E6, B4, B5 }
|
||||
|
||||
/* COL2ROW, ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0000",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["D3", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
|
||||
"rows": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"split": {
|
||||
"soft_serial_pin": "D2"
|
||||
},
|
||||
|
|
|
@ -16,23 +16,6 @@
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B3, B7, F0, F1, F4 }
|
||||
#define MATRIX_COL_PINS { B2, F5, F6, D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7 }
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x4C53",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["B2", "F5", "F6", "D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
|
||||
"rows": ["B3", "B7", "F0", "F1", "F4"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"community_layouts": ["65_ansi_blocker", "65_ansi_blocker_split_bs", "65_iso_blocker", "65_iso_blocker_split_bs"],
|
||||
|
|
|
@ -17,22 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
|
||||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, B0, B1 }
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGB_DI_PIN B3
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 0
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x5647",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "B0", "B1"],
|
||||
"rows": ["C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"backlight": {
|
||||
"pin": "B7",
|
||||
"levels": 5
|
||||
|
|
|
@ -18,14 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
// wiring of each half
|
||||
#define MATRIX_ROW_PINS { D4, F5, F4, F1 }
|
||||
#define MATRIX_COL_PINS { B2, B3, D6, D7, B4, B5 }
|
||||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define SELECT_SOFT_SERIAL_SPEED 1
|
||||
// #define USE_I2C
|
||||
#define SPLIT_USB_DETECT
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0001",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["B2", "B3", "D6", "D7", "B4", "B5"],
|
||||
"rows": ["D4", "F5", "F4", "F1"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"encoder": {
|
||||
"rotary": [
|
||||
{"pin_a": "B0", "pin_b": "D2"}
|
||||
|
|
|
@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D2, D3, D5, B7, F1}
|
||||
#define MATRIX_COL_PINS { F0, E6, B1, B2, B3, B0, D4, D6, D7, B4, B5, B6, C6, C7}
|
||||
|
||||
/* COL2ROW, ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0001",
|
||||
"device_version": "0.0.3"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "E6", "B1", "B2", "B3", "B0", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7"],
|
||||
"rows": ["D2", "D3", "D5", "B7", "F1"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"community_layouts": ["60_ansi_arrow"],
|
||||
|
|
|
@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B0, B1, B2, C7 }
|
||||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C6, B6, B5, B4, D7, D6 }
|
||||
|
||||
/* COL2ROW, ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0005",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C6", "B6", "B5", "B4", "D7", "D6"],
|
||||
"rows": ["B0", "B1", "B2", "C7"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "atmel-dfu",
|
||||
"layouts":{
|
||||
|
|
|
@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
// wiring of each half
|
||||
#define MATRIX_ROW_PINS { D1, D0, D3, B7, B6 }
|
||||
#define MATRIX_COL_PINS { F7, F6, F5, B3, B2, B1 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
//#define EE_HANDS
|
||||
|
||||
#define SPLIT_USB_DETECT
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x1156",
|
||||
"device_version": "1.0.0"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F7", "F6", "F5", "B3", "B2", "B1"],
|
||||
"rows": ["D1", "D0", "D3", "B7", "B6"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"backlight": {
|
||||
"pin": "B5",
|
||||
"levels": 9
|
||||
|
|
|
@ -16,23 +16,6 @@
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D2, D1, D0, D3, B3 }
|
||||
#define MATRIX_COL_PINS { F5, F4, F1, F0, B0, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 8
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0003",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F5", "F4", "F1", "F0", "B0", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
|
||||
"rows": ["D2", "D1", "D0", "D3", "B3"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"backlight": {
|
||||
"pin": "B7",
|
||||
"levels": 5
|
||||
|
|
|
@ -16,23 +16,6 @@
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D0, D1, F0, F4, F1 }
|
||||
#define MATRIX_COL_PINS { B1, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B0 }
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 6
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0004",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["B1", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "B0"],
|
||||
"rows": ["D0", "D1", "F0", "F4", "F1"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"backlight": {
|
||||
"pin": "B7",
|
||||
"levels": 5
|
||||
|
|
|
@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D2, D1, D0, D3, D5 }
|
||||
#define MATRIX_COL_PINS { F5, F4, F1, F0, B0, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 8
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0001",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F5", "F4", "F1", "F0", "B0", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
|
||||
"rows": ["D2", "D1", "D0", "D3", "D5"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"backlight": {
|
||||
"pin": "B7",
|
||||
"levels": 4,
|
||||
|
|
|
@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D0, D1, F0, F4, F1 }
|
||||
#define MATRIX_COL_PINS { B0, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2 }
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 8
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0002",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["B0", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2"],
|
||||
"rows": ["D0", "D1", "F0", "F4", "F1"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"backlight": {
|
||||
"pin": "B7",
|
||||
"breathing": true
|
||||
|
|
|
@ -17,14 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
// 0 1 2 3 4 5 6 7 8 9 A B C D E
|
||||
#define MATRIX_ROW_PINS { B1, B2, B3, B5, B6, B7, B0 }
|
||||
#define MATRIX_COL_PINS { A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7, A0 }
|
||||
|
||||
/* COL2ROW, ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGBLED_NUM 16
|
||||
//#define RGBLIGHT_HUE_STEP 8
|
||||
//#define RGBLIGHT_SAT_STEP 8
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0005",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["A1", "A2", "A3", "A4", "A5", "A6", "A7", "C7", "C6", "C5", "C4", "C3", "C2", "D7", "A0"],
|
||||
"rows": ["B1", "B2", "B3", "B5", "B6", "B7", "B0"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"backlight": {
|
||||
"pin": "D4"
|
||||
},
|
||||
|
|
|
@ -17,22 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D1, D0, B3, B0, B2, B1 }
|
||||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D4, D6, D2, D3, D5 }
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
|
||||
#ifdef RGB_DI_PIN
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0006",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D4", "D6", "D2", "D3", "D5"],
|
||||
"rows": ["D1", "D0", "B3", "B0", "B2", "B1"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"backlight": {
|
||||
"pin": "B7"
|
||||
},
|
||||
|
|
|
@ -17,22 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#pragma once
|
||||
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D1, D0, B3, B0, B2, B1 }
|
||||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D4, D6, D2, D3, D5 }
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
|
||||
#ifdef RGB_DI_PIN
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x0006",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D4", "D6", "D2", "D3", "D5"],
|
||||
"rows": ["D1", "D0", "B3", "B0", "B2", "B1"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"backlight": {
|
||||
"pin": "B7"
|
||||
},
|
||||
|
|
|
@ -16,14 +16,6 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4 }
|
||||
#define MATRIX_COL_PINS { B5, F4, F5, F6, F7, B1, B3, B2, B6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
|
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x350C",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["B5", "F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
|
||||
"rows": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B4"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "caterina",
|
||||
"layouts": {
|
||||
|
|
|
@ -1,26 +0,0 @@
|
|||
/*
|
||||
Copyright 2020 Lasse Küchenmeister
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { D3, D2, D1, D0, D4, C6, D7 }
|
||||
#define MATRIX_COL_PINS { E6, B4, B5, F4, F5, F6, F7, B1, B3 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
|
@ -8,6 +8,11 @@
|
|||
"pid": "0x5558",
|
||||
"device_version": "0.0.1"
|
||||
},
|
||||
"matrix_pins": {
|
||||
"cols": ["E6", "B4", "B5", "F4", "F5", "F6", "F7", "B1", "B3"],
|
||||
"rows": ["D3", "D2", "D1", "D0", "D4", "C6", "D7"]
|
||||
},
|
||||
"diode_direction": "COL2ROW",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "caterina",
|
||||
"layouts": {
|
||||
|
|
|
@ -1,14 +1,5 @@
|
|||
#pragma once
|
||||
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { B1, F7, F6, F5, F4 }
|
||||
#define MATRIX_COL_PINS { B3, B2, B6, B5, B4, E6, D7, C6, D4, D0, D1, D3 }
|
||||
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
|
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue