Add Teensy2.0++ revision and VIA keymap to handwired/sono1 (#15296)
* teensy2.0pp revision, via support * updated documentation * Update keyboards/handwired/sono1/t2pp/rules.mkmaster
Dmitry Nosachev
GitHub
parent
d9e5a5f2db
commit
c5728aebee
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
Copyright 2020 DmNosachev
|
||||
Copyright 2021 DmNosachev
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -30,80 +30,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define MATRIX_ROWS 15
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { A5, B3, A9, A10, B13, B14, B15, A8, B7, B8, B9, C13, A15, A0, A1 }
|
||||
#define MATRIX_COL_PINS { A4, A3, B11, B10, B1, B0, A7, A6 }
|
||||
#define UNUSED_PINS { A5 }
|
||||
|
||||
#define LED_KANA_PIN A2
|
||||
#define LED_CAPS_LOCK_PIN B5
|
||||
#define LED_CTRL_XFER_PIN B6
|
||||
#define LED_NUM_LOCK_PIN B4
|
||||
#define LED_KB_LOCK_PIN B12
|
||||
#define LED_PIN_ON_STATE 0
|
||||
|
||||
/* COL2ROW, ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
//#define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
|
||||
/* disable these deprecated features by default */
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
|
|
@ -111,3 +43,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
/* Bootmagic Lite key configuration */
|
||||
#define BOOTMAGIC_LITE_ROW 0
|
||||
#define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
||||
/* mechanical locking support. NumLock key on the numpad uses Alps SKCL Lock switch */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
/* Copyright 2021 DmNosachev
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/*
|
||||
,---------------------------------------------------------------------------------------------------------, ,-----,
|
||||
| F11 | | F12 | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | |PgUp |PgDn | | NO |
|
||||
|-------------------------------------------------------------------------------------------| |-----------| |-----|-----------------,
|
||||
| Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | —- | += | ~` |BkSpc | |Home | End | | * | / | - | + |
|
||||
|-------------------------------------------------------------------------------------------| |-----------| |-----------------------|
|
||||
| Tab | Q | W | E | R | T | Y | U | I | O | P | {[ | }] | Enter | | Ins | Del | | 7 | 8 | 9 | += |
|
||||
|--------------------------------------------------------------------------------| | `-----------' |-----------------------|
|
||||
| Ctrl | A | S | D | F | G | H | J | K | L | :; | "' | |\ | | | Up | | 4 | 5 | 6 | . |
|
||||
|--------------------------------------------------------------------------------`----------' |-----------| |-----------------------|
|
||||
| Shift | Z | X | C | V | B | N | M | <, | >. | ?/ | NO | Shift | |Left |Right| | 1 | 2 | 3 | <, |
|
||||
|-------------------------------------------------------------------------------------------| |-----------| |-----------------------|
|
||||
|Caps | Alt | App | GUI | Space | Space | Enter | Ctrl | | Alt | | Down | | 0 | 0 | Enter |
|
||||
`-------------------------------------------------------------------------------------------' `-----------' '-----------------------'
|
||||
| Del | BackSp|
|
||||
`--------------'
|
||||
*/
|
||||
[0] = LAYOUT(
|
||||
KC_F11, KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PGUP, KC_PGDN, _______,
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME, KC_END, KC_PAST, KC_PSLS, KC_PMNS, KC_PPLS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_INS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_EQL,
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_UP, KC_P4, KC_P5, KC_P6, KC_PDOT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, KC_RSFT, KC_LEFT, KC_RIGHT, KC_P1, KC_P2, KC_P3, KC_COMM,
|
||||
KC_CAPS, KC_LALT, KC_APP, KC_LGUI, KC_SPACE, KC_SPACE, KC_ENT, KC_RCTL, KC_RALT, KC_DOWN, KC_P0, KC_P0, KC_PENT,
|
||||
KC_DEL, KC_BSPC
|
||||
),
|
||||
|
||||
[1] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______
|
||||
),
|
||||
|
||||
[2] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______
|
||||
),
|
||||
[3] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
VIA_ENABLE = yes
|
||||
|
|
@ -5,11 +5,11 @@
|
|||
ASkeyboard Sono1 keyboard conversion project: direct connection of Black Pill to the matrix.
|
||||
|
||||
* Keyboard Maintainer: [DmNosachev](https://github.com/DmNosachev)
|
||||
* Hardware Supported: [ASkeyboard Sono1](http://www5f.biglobe.ne.jp/~silencium/keyboard/html/alps.html), Black Pill STM32F103C8T6 MCU board. Alternatively you can use any MCU which is supported by QMK and has 28 IO pins or more (15x8 matrix and 5 LEDs): Teensy 2.0++, Blue Pill, etc.
|
||||
* Hardware Supported: [ASkeyboard Sono1](http://www5f.biglobe.ne.jp/~silencium/keyboard/html/alps.html), Teensy 2.0++ or Black Pill STM32F103C8T6 MCU board. Alternatively you can use any MCU which is supported by QMK and has 28 IO pins or more (15x8 matrix and 5 LEDs): Blue Pill, Black Pill STM32F4xx, etc.
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make handwired/sono1:default
|
||||
qmk compile -kb handwired/sono1:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
|
|
@ -22,11 +22,34 @@ ASkeyboard Sono1 has 15x8 matrix. Sono2 numpad connects directly to the main mat
|
|||
Rows (R0-RE) and columns (R0-C7):
|
||||
|
||||
|
||||
Desolder all ICs, capacitors and resistors except R10–R14.
|
||||
|
||||
## LEDs
|
||||
Keyboard has 5 LEDs with common anode. Their cathodes are connected to R10–R14 resistors (you may want to replace them to adjust LED brightness for 3.3V voltage). Add 5 wire jumpers to connect them to the corresponding traces.
|
||||
|
||||
|
||||
|
||||
## Teensy 2.0++
|
||||
Suggested mount position for the Teensy 2.0++ (view from the bottom side of the PCB):
|
||||
```
|
||||
R8 R9 RA RB RC RD RE L0 R8 C7 C6 C5 C4 C3 C2 C1 C0
|
||||
* | | | | | | | * | | | | | | | |
|
||||
,------------------------------------------------------------,
|
||||
,---|GN B7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 C0 C1 C2 C3 C4 C5 C6 C7 |
|
||||
| |D7 |
|
||||
|USB| |
|
||||
| |GN |
|
||||
'---|V B6 B5 B4 B3 B2 B1 B0 E7 E6 G A F0 F1 F2 F3 F4 F5 F6 F7 |
|
||||
`------------------------------------------------------------'
|
||||
* | | | | | | | | | | | |
|
||||
GN L2 L1 L3 L4 R7 R6 R5 R4 R3 R2 R1 R0
|
||||
```
|
||||
Asterisk sign designates pins of the Teensy that don't align properly with PCB and need to be rewired.
|
||||
|
||||
1. Compile and flash the firmware: `qmk compile -kb handwired/sono1/t2pp:default:flash`. Press the reset button on Teensy to launch the bootloader.
|
||||
2. You will need to solder several pin headers to Teensy: two 7 pin headers (C0–C7, D5–B7), 8 pin (F0–F7) and 4 pin (B1—B4).
|
||||
3. Solder the Teensy to keyboard's PCB. You will need to manually reroute only 3 pins.
|
||||
|
||||
## Black Pill
|
||||
Suggested mount position for the Black Pill (view from the bottom side of the PCB):
|
||||
|
||||
|
|
@ -47,11 +70,12 @@ Asterisk sign designates pins of the Black Pill that don't align properly with P
|
|||
|
||||
|
||||
|
||||
1. Desolder all ICs, capacitors and resistors except R10–R14.
|
||||
1. Solder 4-pin SWD header to Black Pill.
|
||||
2. Burn [STM32duino bootloader](https://github.com/rogerclarkmelbourne/STM32duino-bootloader/blob/master/bootloader_only_binaries/generic_boot20_pb12.bin) to Black Pill.
|
||||
3. Compile and flash the firmware: `make handwired/sono1:default:flash`
|
||||
3. Compile and flash the firmware: `qmk compile -kb handwired/sono1/stm32f103:default:flash`
|
||||
4. Connect rows, columns and LED pads to the corresponding pins of the Black Pill.
|
||||
|
||||
## Keymap
|
||||
'CUR LOCK' key on Sono2 numpad has locking switch by default (Alps SKCL lock). QMK [supports mechanical locking switches](https://docs.qmk.fm/#/faq_keymap?id=mechanical-lock-switch-support) for CapsLock, NumLock and ScrollLock keycodes.
|
||||
|
||||
There is 'debug' keymap which doesn't output any scancodes, but displays row and column numbers of pressed buttons to console (hid_listen or QMK Toolbox).
|
||||
|
|
|
|||
|
|
@ -1,11 +1,4 @@
|
|||
# MCU name
|
||||
MCU = STM32F103
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = stm32duino
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
DEFAULT_FOLDER = handwired/sono1/t2pp
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@
|
|||
|
||||
/*
|
||||
* This file was auto-generated by:
|
||||
* `qmk chibios-confmigrate -i keyboards/handwired/sono1/chconf.h -r platforms/chibios/common/configs/chconf.h`
|
||||
* `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/chconf.h -r platforms/chibios/common/configs/chconf.h`
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
|
@ -26,4 +26,3 @@
|
|||
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
|
||||
|
||||
#include_next <chconf.h>
|
||||
|
||||
|
|
@ -0,0 +1,36 @@
|
|||
/*
|
||||
Copyright 2021 DmNosachev
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
#undef DEVICE_VER
|
||||
|
||||
#define DEVICE_VER 0x0001
|
||||
|
||||
#define MATRIX_ROW_PINS { A5, B3, A9, A10, B13, B14, B15, A8, B7, B8, B9, C13, A15, A0, A1 }
|
||||
#define MATRIX_COL_PINS { A4, A3, B11, B10, B1, B0, A7, A6 }
|
||||
|
||||
|
||||
#define LED_KANA_PIN A2
|
||||
#define LED_CAPS_LOCK_PIN B5
|
||||
#define LED_CTRL_XFER_PIN B6
|
||||
#define LED_NUM_LOCK_PIN B4
|
||||
#define LED_KB_LOCK_PIN B12
|
||||
#define LED_PIN_ON_STATE 0
|
||||
|
||||
|
|
@ -16,7 +16,7 @@
|
|||
|
||||
/*
|
||||
* This file was auto-generated by:
|
||||
* `qmk chibios-confmigrate -i keyboards/handwired/sono1/halconf.h -r platforms/chibios/common/configs/halconf.h`
|
||||
* `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/halconf.h -r platforms/chibios/common/configs/halconf.h`
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
|
@ -24,4 +24,3 @@
|
|||
#define HAL_USE_PWM TRUE
|
||||
|
||||
#include_next <halconf.h>
|
||||
|
||||
|
|
@ -16,7 +16,7 @@
|
|||
|
||||
/*
|
||||
* This file was auto-generated by:
|
||||
* `qmk chibios-confmigrate -i keyboards/handwired/sono1/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h`
|
||||
* `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h`
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
|
@ -28,4 +28,3 @@
|
|||
|
||||
#undef STM32_SPI_USE_SPI2
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
# MCU name
|
||||
MCU = STM32F103
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = stm32duino
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
|
|
@ -0,0 +1,36 @@
|
|||
/*
|
||||
Copyright 2021 DmNosachev
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
#undef DEVICE_VER
|
||||
|
||||
#define DEVICE_VER 0x0002
|
||||
|
||||
#define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0, D7, B7, D0, D1, D2, D3, D4 }
|
||||
#define MATRIX_COL_PINS { C6, C5, C4, C3, C2, C1, C0, E1 }
|
||||
|
||||
|
||||
#define LED_KANA_PIN D5
|
||||
#define LED_CAPS_LOCK_PIN B3
|
||||
#define LED_CTRL_XFER_PIN B4
|
||||
#define LED_NUM_LOCK_PIN B2
|
||||
#define LED_KB_LOCK_PIN B1
|
||||
#define LED_PIN_ON_STATE 0
|
||||
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
# MCU name
|
||||
MCU = at90usb1286
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = halfkay
|
||||
Loading…
Reference in New Issue