[Keyboard] Le Chiffre rev 2 and HE additions (#17377)
* chiffre refactor for new revisions * updated led matrix config * updated per suggestions * add tapdance enable * revert tapdance (none defined in the default keymaps) * clean up rules * add readme for HE * remove notes in readme * fix perm * fix perms * Fix spacing on readme * fix perm * fix perms again?master
TJ
GitHub
parent
f1ccd60458
commit
c3df1775bc
|
|
@ -20,7 +20,7 @@
|
|||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x7431
|
||||
#define PRODUCT_ID 0xD645
|
||||
#define DEVICE_VER 0x0001
|
||||
|
||||
#define MANUFACTURER tominabox1
|
||||
#define PRODUCT Le Chiffre
|
||||
|
||||
|
|
@ -28,19 +28,6 @@
|
|||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 10
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B3, D4, F1, C6 }
|
||||
#define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
|
@ -53,14 +40,10 @@
|
|||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* Define encoder pads */
|
||||
#define ENCODERS_PAD_A { D5 }
|
||||
#define ENCODERS_PAD_B { D3 }
|
||||
|
||||
/*
|
||||
* WS2812 Underglow Matrix options
|
||||
*/
|
||||
#define RGB_DI_PIN F0
|
||||
|
||||
#define RGBLED_NUM 11
|
||||
|
||||
#define DRIVER_LED_TOTAL RGBLED_NUM
|
||||
|
|
@ -76,53 +59,4 @@
|
|||
#define RGB_MATRIX_SAT_STEP 8
|
||||
#define RGB_MATRIX_VAL_STEP 8
|
||||
#define RGB_MATRIX_SPD_STEP 10
|
||||
|
||||
// RGB Matrix Animation modes. Explicitly enabled
|
||||
// For full list of effects, see:
|
||||
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
|
||||
# define ENABLE_RGB_MATRIX_ALPHAS_MODS
|
||||
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
|
||||
# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
|
||||
# define ENABLE_RGB_MATRIX_BREATHING
|
||||
# define ENABLE_RGB_MATRIX_BAND_SAT
|
||||
# define ENABLE_RGB_MATRIX_BAND_VAL
|
||||
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
|
||||
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
|
||||
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
|
||||
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_ALL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
|
||||
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
|
||||
# define ENABLE_RGB_MATRIX_DUAL_BEACON
|
||||
# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
|
||||
# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
|
||||
# define ENABLE_RGB_MATRIX_RAINDROPS
|
||||
# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
|
||||
# define ENABLE_RGB_MATRIX_HUE_BREATHING
|
||||
# define ENABLE_RGB_MATRIX_HUE_PENDULUM
|
||||
# define ENABLE_RGB_MATRIX_HUE_WAVE
|
||||
# define ENABLE_RGB_MATRIX_PIXEL_RAIN
|
||||
# define ENABLE_RGB_MATRIX_PIXEL_FLOW
|
||||
# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
|
||||
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
|
||||
# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
|
||||
# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
|
||||
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
|
||||
# define ENABLE_RGB_MATRIX_SPLASH
|
||||
# define ENABLE_RGB_MATRIX_MULTISPLASH
|
||||
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
|
||||
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -0,0 +1,39 @@
|
|||
/* Copyright 2022 tominabox1
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define DEVICE_VER 0x0003
|
||||
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#undef DIODE_DIRECTION
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define MATRIX_ROW_PINS { B3, D4, F1, C6 }
|
||||
#define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* Define encoder pads */
|
||||
#define ENCODERS_PAD_A { D5 }
|
||||
#define ENCODERS_PAD_B { D3 }
|
||||
|
||||
/*
|
||||
* WS2812 Underglow Matrix options
|
||||
*/
|
||||
#define RGB_DI_PIN F0
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/* Copyright 2022 tominabox1
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "he.h"
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
led_config_t g_led_config = { {
|
||||
// Key Matrix to LED Index
|
||||
{ 3, 4, NO_LED, 5, 6 },
|
||||
{ NO_LED, NO_LED, 10, NO_LED, NO_LED },
|
||||
{ NO_LED, NO_LED, 9, NO_LED, NO_LED },
|
||||
{ 2, 1, 0, 8, 7 }
|
||||
}, {
|
||||
|
||||
// LED Index to Physical Position
|
||||
{ 128, 64 }, { 77, 64 }, { 0, 48 }, { 0, 0 }, { 115, 0 }, { 166, 0 }, { 255, 0 }, { 255, 48 }, { 178, 64 }, { 128, 40 }, { 128, 30 }
|
||||
}, {
|
||||
|
||||
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2
|
||||
} };
|
||||
#endif
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/* Copyright 2022 tominabox1
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define XXX KC_NO
|
||||
|
||||
#define LAYOUT( \
|
||||
K00, K01, K02, K03, K04, K38, K05, K06, K07, K08, K09, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
|
||||
K32, K34, K35, K37 \
|
||||
) \
|
||||
{ \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
|
||||
{ XXX, XXX, K32, XXX, K34, K35, XXX, K37, K38, XXX } \
|
||||
}
|
||||
|
|
@ -0,0 +1 @@
|
|||
The HE firmware is for the Hotswap Edition (HE) PCB by @nasp, available at checkerboards.xyz.
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Enable N-Key Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
ENCODER_ENABLE = yes
|
||||
RGB_MATRIX_ENABLE = yes
|
||||
RGB_MATRIX_DRIVER = WS2812
|
||||
LTO_ENABLE = yes
|
||||
|
|
@ -144,13 +144,14 @@ void render_mod_status(uint8_t modifiers) {
|
|||
oled_write_ln_P(PSTR("GUI"), (modifiers & MOD_MASK_GUI));
|
||||
}
|
||||
|
||||
bool oled_task_user(void) {
|
||||
void oled_task_keymap(void) {
|
||||
render_lechiffre_logo();
|
||||
oled_set_cursor(0,3);
|
||||
// render_layer_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
|
||||
render_mod_status(get_mods()|get_oneshot_mods());
|
||||
render_keylock_status(host_keyboard_led_state());
|
||||
render_keylogger_status();
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -4,12 +4,18 @@
|
|||
|
||||
Le Chiffre (ironically, "the number" in French is a 30% keyboard designed by tominabox1. The purpose of the board is to provide a platform for MX and Choc ergo in one package for when ones wrists need a break. The board supports an RGB LED strip with DI on port F0. The board is also fitted with support for run-of-the-mill .91" OLED and EC11 rotary encoder.
|
||||
|
||||
There are 3 PCB revisions: Rev 1 (Original), Rev 2 (P3D version sold with the Le Chiffre Plus), and HE (Hotswap Edition from Checkerboards.xyz).
|
||||
|
||||
By default the OLED is **disabled**. This is to prevent issues with operation when one is not installed. Be sure to enable the OLED in the rules.mk file if you have one installed!
|
||||
|
||||
* Keyboard Maintainer: [TJ Campie](https://github.com/tominabox1)
|
||||
* Hardware Supported: Le Chiffre (source not available at this time)
|
||||
* Hardware Supported: [Le Chiffre](https://github.com/tominabox1/Le-Chiffre-Keyboard)
|
||||
* Hardware Availability: Bring your own case.
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make tominabox1/le_chiffre:default
|
||||
make tominabox1/le_chiffre/rev1:default
|
||||
make tominabox1/le_chiffre/rev2:default
|
||||
make tominabox1/le_chiffre/he:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
|
|
|||
|
|
@ -0,0 +1,44 @@
|
|||
/* Copyright 2020 tominabox1
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define DEVICE_VER 0x0001
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B3, D4, F1, C6 }
|
||||
#define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* Define encoder pads */
|
||||
#define ENCODERS_PAD_A { D5 }
|
||||
#define ENCODERS_PAD_B { D3 }
|
||||
|
||||
/*
|
||||
* WS2812 Underglow Matrix options
|
||||
*/
|
||||
#define RGB_DI_PIN F0
|
||||
|
|
@ -13,7 +13,7 @@
|
|||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "le_chiffre.h"
|
||||
#include "rev1.h"
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
led_config_t g_led_config = { {
|
||||
|
|
@ -0,0 +1,23 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Enable N-Key Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
ENCODER_ENABLE = yes
|
||||
RGB_MATRIX_ENABLE = yes
|
||||
RGB_MATRIX_DRIVER = WS2812
|
||||
LTO_ENABLE = yes
|
||||
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
/* Copyright 2020 tominabox1
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
#define DEVICE_VER 0x0002
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B3, F6, F7, C7 }
|
||||
#define MATRIX_COL_PINS { B2, F0, F1, F4, F5, B5, B4, D7, D6, D4 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* Define encoder pads */
|
||||
#define ENCODERS_PAD_A { B6 }
|
||||
#define ENCODERS_PAD_B { C6 }
|
||||
|
||||
/*
|
||||
* WS2812 Underglow Matrix options
|
||||
*/
|
||||
#define RGB_DI_PIN B1
|
||||
|
|
@ -0,0 +1,2 @@
|
|||
Updated v2 PCB with better plate screw clearances, ESD protection, as well as sweet sweet curvy traces.
|
||||
Rev. 2.0 requires new firmware due to the pinout changing to facilitate prettier trace runs.
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/* Copyright 2020 tominabox1
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "rev2.h"
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
led_config_t g_led_config = { {
|
||||
// Key Matrix to LED Index
|
||||
{ 3, 4, NO_LED, 5, 6 },
|
||||
{ NO_LED, NO_LED, 10, NO_LED, NO_LED },
|
||||
{ NO_LED, NO_LED, 9, NO_LED, NO_LED },
|
||||
{ 2, 1, 0, 8, 7 }
|
||||
}, {
|
||||
|
||||
// LED Index to Physical Position
|
||||
{ 128, 64 }, { 77, 64 }, { 0, 48 }, { 0, 0 }, { 115, 0 }, { 166, 0 }, { 255, 0 }, { 255, 48 }, { 178, 64 }, { 128, 40 }, { 128, 30 }
|
||||
}, {
|
||||
|
||||
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2
|
||||
} };
|
||||
#endif
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/* Copyright 2020 tominabox1
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define XXX KC_NO
|
||||
|
||||
#define LAYOUT( \
|
||||
K00, K01, K02, K03, K04, K38, K05, K06, K07, K08, K09, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
|
||||
K32, K34, K35, K37 \
|
||||
) \
|
||||
{ \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
|
||||
{ XXX, XXX, K32, XXX, K34, K35, XXX, K37, K38, XXX } \
|
||||
}
|
||||
|
|
@ -0,0 +1,23 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Enable N-Key Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
ENCODER_ENABLE = yes
|
||||
RGB_MATRIX_ENABLE = yes
|
||||
RGB_MATRIX_DRIVER = WS2812
|
||||
LTO_ENABLE = yes
|
||||
|
||||
|
|
@ -1,19 +1 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
NKRO_ENABLE = yes # Enable N-Key Rollover
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
ENCODER_ENABLE = yes
|
||||
OLED_ENABLE = no
|
||||
RGB_MATRIX_ENABLE = yes
|
||||
RGB_MATRIX_DRIVER = WS2812
|
||||
LTO_ENABLE = yes
|
||||
DEFAULT_FOLDER = tominabox1/le_chiffre/rev1
|
||||
|
|
|
|||
Loading…
Reference in New Issue