Jotpad16 (#5212)
* jotix 4x12 keymap * readme corrections * jotix ortho 4x12 keymap * jotix ortho 4x12 keymap * jotix ortho 4x12 keymap * jotix ortho 4x12 keymap * jotix ortho 4x12 keymap * jotix ortho 4x12 keymap * add jotpad keyboard * add jotpad keyboard * backlight pin for arduino pro micro * readme correction * readme correction * jotpad16 * Update keyboards/handwired/jotpad16/jotpad16.h Co-Authored-By: jotix <47826561+jotix@users.noreply.github.com> * Update keyboards/handwired/jotpad16/keymaps/default/keymap.c Co-Authored-By: jotix <47826561+jotix@users.noreply.github.com> * Update keyboards/handwired/jotpad16/readme.md Co-Authored-By: jotix <47826561+jotix@users.noreply.github.com>master
parent
e3621c162c
commit
c3cf9c0cef
|
@ -0,0 +1,38 @@
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x6060
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER Jotix
|
||||||
|
#define PRODUCT JotPad16
|
||||||
|
#define DESCRIPTION A Jotantastic compact NumPad
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 4
|
||||||
|
#define MATRIX_COLS 4
|
||||||
|
|
||||||
|
/* pro_micro pin-out */
|
||||||
|
#define MATRIX_ROW_PINS { B6, B2, D2, D3 }
|
||||||
|
#define MATRIX_COL_PINS { B5, B4, B3, B1 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
|
||||||
|
/* leds */
|
||||||
|
#define QMK_LED E6
|
||||||
|
#define BACKLIGHT_LEVELS 3
|
||||||
|
#define BACKLIGHT_PIN D7
|
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */
|
||||||
|
#define DEBOUNCING_DELAY 0
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
|
@ -0,0 +1,6 @@
|
||||||
|
#include "jotpad16.h"
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
|
@ -0,0 +1,18 @@
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
// Used to create a keymap using only KC_ prefixed keys
|
||||||
|
#define LAYOUT_ortho_4x4( \
|
||||||
|
k00, k01, k02, k03, \
|
||||||
|
k10, k11, k12, k13, \
|
||||||
|
k20, k21, k22, k23, \
|
||||||
|
k30, k31, k32, k33 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ k00, k01, k02, k03 }, \
|
||||||
|
{ k10, k11, k12, k13 }, \
|
||||||
|
{ k20, k21, k22, k23 }, \
|
||||||
|
{ k30, k31, k32, k33 } \
|
||||||
|
}
|
||||||
|
|
|
@ -0,0 +1,34 @@
|
||||||
|
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||||
|
// this is the style you want to emulate.
|
||||||
|
|
||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
extern keymap_config_t keymap_config;
|
||||||
|
|
||||||
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||||
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||||
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||||
|
// entirely and just use numbers.
|
||||||
|
|
||||||
|
#define _NUMPAD 0
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
/* Numpad
|
||||||
|
* +-------+-------+-------+-------+
|
||||||
|
* | 7 | 8 | 9 | - |
|
||||||
|
* +-------+-------+-------+-------+
|
||||||
|
* | 4 | 5 | 6 | + |
|
||||||
|
* +-------+-------+-------+-------+
|
||||||
|
* | 1 | 2 | 3 | enter |
|
||||||
|
* +-------+-------+-------+-------+
|
||||||
|
* | 0 | . | / | * |
|
||||||
|
* +-------+-------+-------+-------+
|
||||||
|
*/
|
||||||
|
[_NUMPAD] = LAYOUT_ortho_4x4(
|
||||||
|
KC_P7, KC_P8, KC_P9, KC_MINS,
|
||||||
|
KC_P4, KC_P5, KC_P6, KC_PLUS,
|
||||||
|
KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||||
|
KC_P0, KC_PDOT,KC_PSLS,KC_ASTR
|
||||||
|
),
|
||||||
|
};
|
|
@ -0,0 +1,39 @@
|
||||||
|
# JotPad16
|
||||||
|
|
||||||
|
![JotPad16](https://i.imgur.com/RwmqWuS.jpg)
|
||||||
|
|
||||||
|
A ortholinear keypad (4x4) made by jotix.
|
||||||
|
|
||||||
|
Keyboard Maintainer: [jotix](https://github.com/jotix)
|
||||||
|
Hardware Supported: Arduino Pro Micro
|
||||||
|
|
||||||
|
### Arduino Pro Micro Pinout
|
||||||
|
|
||||||
|
| rows | 0 | 1 | 2 | 3 |
|
||||||
|
|-------------|----|----|-----|-----|
|
||||||
|
| arduino pin | 10 | 16 | RXI | TX0 |
|
||||||
|
| qmk pin | B6 | B2 | D2 | D3 |
|
||||||
|
|
||||||
|
| columns | 0 | 1 | 2 | 3 |
|
||||||
|
|-------------|----|----|----|----|
|
||||||
|
| arduino pin | 9 | 8 | 14 | 15 |
|
||||||
|
| qmk pin | B5 | B4 | B3 | C3 |
|
||||||
|
|
||||||
|
| | QMK led | Backlight |
|
||||||
|
|-------------|-----------|-----------|
|
||||||
|
| Arduino pin | 7 | 6 |
|
||||||
|
| qmk pin | E6 | D7 |
|
||||||
|
|
||||||
|
### Compiling the Firmware
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make handwired/jotpad16:default
|
||||||
|
|
||||||
|
### The Default Keymap
|
||||||
|
|
||||||
|
![Default Keymap](https://i.imgur.com/VJZcFRN.jpg)
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
|
|
||||||
|
|
|
@ -0,0 +1,66 @@
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Bootloader
|
||||||
|
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||||
|
# different sizes, comment this out, and the correct address will be loaded
|
||||||
|
# automatically (+60). See bootloader.mk for all options.
|
||||||
|
BOOTLOADER = caterina
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
|
# the appropriate keymap folder that will get included automatically
|
||||||
|
#
|
||||||
|
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
||||||
|
API_SYSEX_ENABLE = no
|
||||||
|
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
LAYOUTS = ortho_4x4
|
Loading…
Reference in New Issue