Merge remote-tracking branch 'upstream/master' into develop

docs/custom_quantum_functions.md

@@ -148,8 +148,8 @@ This is useful for setting up stuff that you may need elsewhere, but isn't hardw
 
 * GPIO pin initialisation: `void matrix_init_pins(void)`
   * This needs to perform the low-level initialisation of all row and column pins. By default this will initialise the input/output state of each of the GPIO pins listed in `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no initialisation of pin state will occur within QMK itself, instead deferring to the keyboard's override.
-* `COL2ROW`-based row reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)`
+* `COL2ROW`-based row reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)`
-* `ROW2COL`-based column reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)`
+* `ROW2COL`-based column reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)`
 * `DIRECT_PINS`-based reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)`
   * These three functions need to perform the low-level retrieval of matrix state of relevant input pins, based on the matrix type. Only one of the functions should be implemented, if needed. By default this will iterate through `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, configuring the inputs and outputs based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no manipulation of matrix GPIO pin state will occur within QMK itself, instead deferring to the keyboard's override.
 

docs/feature_led_matrix.md

@@ -244,14 +244,7 @@ static bool my_cool_effect2(effect_params_t* params) {
 #endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 ```
 
-For inspiration and examples, check out the built-in effects under `quantum/led_matrix_animations/`
+For inspiration and examples, check out the built-in effects under `quantum/led_matrix/animations/`.
-
-
-
-
-
-
-
 
 
 ## Additional `config.h` Options :id=additional-configh-options

docs/feature_rgb_matrix.md

@@ -562,7 +562,7 @@ static bool my_cool_effect2(effect_params_t* params) {
 #endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 ```
 
-For inspiration and examples, check out the built-in effects under `quantum/rgb_matrix_animations/`
+For inspiration and examples, check out the built-in effects under `quantum/rgb_matrix/animations/`.
 
 
 ## Colors :id=colors

keyboards/0xcb/1337/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no	        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/1upkeyboards/super16/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = WS2812

keyboards/40percentclub/25/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/4x4/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/40percentclub/6lit/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/foobar/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/half_n_half/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/i75/rules.mk

@@ -10,7 +10,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/mf68/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/nein/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/nori/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/40percentclub/ut47/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/acheron/shark/rules.mk

@@ -17,7 +17,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/aeboards/aegis/rules.mk

@@ -16,6 +16,6 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/aeboards/ext65/rev1/rules.mk

@@ -16,6 +16,6 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/ai03/lunar/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/ai03/orbit/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/ai03/quasar/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/ai03/soyuz/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/akb/eb46/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/akb/raine/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/alf/dc60/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/alf/x11/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/amjkeyboard/amj66/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/angel64/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/ashpil/modelm_usbc/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/atreus/rules.mk

@@ -10,7 +10,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = yes        # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/baguette/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/beatervan/rules.mk

@@ -16,6 +16,6 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = yes         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/blockey/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/boston/rules.mk

@@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
+MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes      # Audio control and System control
 CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration

keyboards/bpiphany/frosty_flake/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/bpiphany/kitten_paw/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/bpiphany/sixshooter/rules.mk

@@ -16,6 +16,6 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/bpiphany/tiger_lily/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/bpiphany/unloved_bastard/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = yes      # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/bthlabs/geekpad/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/business_card/alpha/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/business_card/beta/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/business_card/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/c39/keymaps/drashna/rules.mk

@@ -5,22 +5,14 @@ BOARD = QMK_PROTON_C
 # Bootloader selection
 BOOTLOADER = stm32-dfu
 
-BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite
+BOOTMAGIC_ENABLE = yes
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+CONSOLE_ENABLE = yes
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+COMMAND_ENABLE = yes
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+NKRO_ENABLE = yes
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+AUDIO_ENABLE = yes
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+UNICODE_ENABLE = yes
-NKRO_ENABLE = yes            # USB Nkey Rollover
+HAPTIC_ENABLE = SOLENOID
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE = yes         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = yes           # Audio output on port C6
-RGBLIGHT_ENABLE = yes       # RGB Enable / Disable
 
 RGBLIGHT_STARTUP_ANIMATION = yes
-
-HAPTIC_ENABLE = SOLENOID

keyboards/c39/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 RGBLIGHT_ENABLE = no        # RGB Enable / Disable

keyboards/ckeys/handwire_101/rules.mk

@@ -17,7 +17,7 @@ TERMINAL_ENABLE = yes
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 MIDI_ENABLE = no             # MIDI support
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output

keyboards/ckeys/nakey/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/ckeys/obelus/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 MIDI_ENABLE = yes           # MIDI support
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = yes           # Audio output on port C6

keyboards/ckeys/thedora/info.json

@@ -3,32 +3,32 @@
   "url": "https://ckeys.org/slides/exboard",
   "maintainer": "brandenbyers",
   "layouts": {
-    "LAYOUT_ortho_4x5": {
+    "LAYOUT": {
       "layout": [
         {"label":"k00", "x":1, "y":0},
         {"label":"k01", "x":2, "y":0},
         {"label":"k02", "x":3, "y":0},
         {"label":"k03", "x":4, "y":0},
         {"label":"k04", "x":5, "y":0},
+
+        {"label":"k10", "x":1, "y":1},
+        {"label":"k11", "x":2, "y":1},
+        {"label":"k12", "x":3, "y":1},
+        {"label":"k13", "x":4, "y":1},
+        {"label":"k14", "x":5, "y":1},
+
+        {"label":"k20", "x":1, "y":2},
+        {"label":"k21", "x":2, "y":2},
+        {"label":"k22", "x":3, "y":2},
+        {"label":"k23", "x":4, "y":2},
+        {"label":"k24", "x":5, "y":2},
+
         {"label":"k05 (Rotary Push)", "x":0, "y":3},
-
+        {"label":"k30", "x":1, "y":3},
-        {"label":"k06", "x":1, "y":1},
+        {"label":"k31", "x":2, "y":3},
-        {"label":"k07", "x":2, "y":1},
+        {"label":"k32", "x":3, "y":3},
-        {"label":"k08", "x":3, "y":1},
+        {"label":"k33", "x":4, "y":3},
-        {"label":"k09", "x":4, "y":1},
+        {"label":"k34", "x":5, "y":3}
-        {"label":"k10", "x":5, "y":1},
-
-        {"label":"k11", "x":1, "y":2},
-        {"label":"k12", "x":2, "y":2},
-        {"label":"k13", "x":3, "y":2},
-        {"label":"k14", "x":4, "y":2},
-        {"label":"k15", "x":5, "y":2},
-
-        {"label":"k16", "x":1, "y":3},
-        {"label":"k17", "x":2, "y":3},
-        {"label":"k18", "x":3, "y":3},
-        {"label":"k19", "x":4, "y":3},
-        {"label":"k20", "x":5, "y":3}
       ]
     }
   }

keyboards/ckeys/thedora/keymaps/default/config.h

@@ -1,3 +0,0 @@
-#pragma once
-
-// Add overrides here

keyboards/ckeys/thedora/keymaps/default/keymap.c

@@ -1,3 +1,19 @@
+/* Copyright 2019 Branden Byers (@brandenbyers)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include QMK_KEYBOARD_H
 
 enum layers {
@@ -10,133 +26,133 @@ enum layers {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
+    //           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
-//           │         │         │         │         │         │
+    //           │         │         │         │         │         │
-//           │    7    │    8    │    9    │    /    │  ADMIN  │
+    //           │    7    │    8    │    9    │    /    │  ADMIN  │
-//  ROTORY   │         │         │         │         │         │
+    //  ROTARY   │         │         │         │         │         │
-//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
+    //  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  VOL UP   │         │         │         │         │         │
+    //  PAGE DOWN│         │         │         │         │         │
-//           │    4    │    5    │    6    │    *    │  MOUSE  │
+    //           │    4    │    5    │    6    │    *    │  MOUSE  │
-//  ROTORY   │         │         │         │         │         │
+    //  ROTARY   │         │         │         │         │         │
-//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
+    //  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  VOL DOWN │         │         │         │         │         │
+    //  PAGE UP  │         │         │         │         │         │
-//           │    1    │    2    │    3    │    -    │  MIDI   │
+    //           │    1    │    2    │    3    │    -    │  MIDI   │
-//           │         │         │         │         │         │
+    //           │         │         │         │         │         │
-// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
+    // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
-// │  TOGGLE │         │         │         │         │         │
+    // │  TOGGLE │         │         │         │         │         │
-// │  MUSIC  │    0    │    .    │    =    │    +    │  MUSIC  │
+    // │  MUSIC  │    0    │    .    │    =    │    +    │  MUSIC  │
-// │         │         │         │         │         │         │
+    // │         │         │         │         │         │         │
-// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
+    // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
 
     [_BASE] = LAYOUT(
-    KC_KP_7, KC_KP_8,   KC_KP_9,     KC_PSLS, MO(_ADMIN), MU_TOG,
+                KC_P7,    KC_P8  , KC_P9  , KC_PSLS, MO(_ADMIN),
-    KC_KP_4, KC_KP_5,   KC_KP_6,     KC_PAST, TG(_MOUSE),
+                KC_P4,    KC_P5  , KC_P6  , KC_PAST, TG(_MOUSE),
-    KC_KP_1, KC_KP_2,   KC_KP_3,     KC_PMNS, TG(_MIDI),
+                KC_P1,    KC_P2  , KC_P3  , KC_PMNS, TG(_MIDI),
-    KC_KP_0, KC_KP_DOT, KC_KP_EQUAL, KC_PPLS, MO(_MUSIC)
+        MU_TOG, KC_P0,    KC_PDOT, KC_PEQL, KC_PPLS, MO(_MUSIC)
     ),
 
-// MUSIC LAYER
+    // MUSIC LAYER
     //           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
     //           │         │         │         │         │         │
     //           │         │         │         │         │         │
- // ROTORY   │         │         │         │         │         │
+    //  ROTARY   │         │         │         │         │         │
     //  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
- // PAGE UP  │         │         │         │         │         │
- //          │         │         │         │         │         │
- // ROTORY   │         │         │         │         │         │
- // LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
     //  PAGE DOWN│         │         │         │         │         │
+    //           │         │         │         │         │         │
+    //  ROTARY   │         │         │         │         │         │
+    //  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
+    //  PAGE UP  │         │         │         │         │         │
     //           │         │         │         │  MODE   │         │
     //           │         │         │         │         │         │
- //┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
+    // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
- //│         │         │         │         │         │         │
+    // │         │         │         │         │         │         │
- //│         │ RECORD  │  STOP   │         │  PLAY   │         │
+    // │         │ RECORD  │  STOP   │         │  PLAY   │         │
- //│         │         │         │         │         │         │
+    // │         │         │         │         │         │         │
- //└─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
+    // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
 
     [_MUSIC] = LAYOUT(
-    _______, _______, _______, _______, _______, _______,
+                 _______, _______, _______, _______, _______,
                  _______, _______, _______, _______, _______,
                  _______, _______, _______, _______, MU_MOD,
-    KC_LCTL, KC_LALT, _______, KC_LGUI, _______
+        _______, KC_LCTL, KC_LALT, _______, KC_LGUI, _______
     ),
 
-// MIDI LAYER
+    // MIDI LAYER
-//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
+    //           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
-//           │         │         │         │         │         │
+    //           │         │         │         │         │         │
-//           │   D♯    │    E    │    F    │   F♯    │    G    │
+    //           │   D♯    │    E    │    F    │   F♯    │    G    │
-//  ROTORY   │         │         │         │         │         │
+    //  ROTARY   │         │         │         │         │         │
-//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
+    //  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE UP  │         │         │         │         │         │
+    //  PAGE DOWN│         │         │         │         │         │
-//           │   A♯    │    B    │    C    │   C♯    │    D    │
+    //           │   A♯    │    B    │    C    │   C♯    │    D    │
-//  ROTORY   │         │         │         │         │         │
+    //  ROTARY   │         │         │         │         │         │
-//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
+    //  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE DOWN│         │         │         │         │         │
+    //  PAGE UP  │         │         │         │         │         │
-//           │    F    │   F♯    │    G    │   G♯    │    A    │
+    //           │    F    │   F♯    │    G    │   G♯    │    A    │
-//           │         │         │         │         │         │
+    //           │         │         │         │         │         │
-// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
+    // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
-// │         │         │         │         │         │         │
+    // │         │         │         │         │         │         │
-// │         │    C    │   C♯    │    D    │   D♯    │    E    │
+    // │         │    C    │   C♯    │    D    │   D♯    │    E    │
-// │         │         │         │         │         │         │
+    // │         │         │         │         │         │         │
-// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
+    // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
 
     [_MIDI] = LAYOUT(
-    MI_Ds_3, MI_E_3,  MI_F_3, MI_Fs_3, MI_G_3, _______,
+                 MI_Ds_3, MI_E_3,  MI_F_3,  MI_Fs_3, MI_G_3,
                  MI_As_2, MI_B_2,  MI_C_3,  MI_Cs_3, MI_D_3,
                  MI_F_2,  MI_Fs_2, MI_G_2,  MI_Gs_2, TG(_MIDI),
-    MI_C_2,  MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2
+        _______, MI_C_2,  MI_Cs_2, MI_D_2,  MI_Ds_2, MI_E_2
     ),
 
-// MOUSE LAYER
+    // MOUSE LAYER
-//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
+    //           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
-//           │         │         │         │         │         │
+    //           │         │         │         │         │         │
-//           │  BTN 5  │         │  WHEEL  │         │         │
+    //           │  BTN 5  │         │  WHEEL  │         │         │
-//  ROTORY   │         │         │   UP    │         │         │
+    //  ROTARY   │         │         │   UP    │         │         │
-//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
+    //  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE DOWN│         │         │         │         │         │
+    //  PAGE DOWN│         │         │         │         │         │
-//           │         │  LEFT   │  MOUSE  │  RIGHT  │         │
+    //           │         │  LEFT   │  MOUSE  │  RIGHT  │         │
-//  ROTORY   │         │  CLICK  │   UP    │  CLICK  │         │
+    //  ROTARY   │         │  CLICK  │   UP    │  CLICK  │         │
-//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
+    //  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE UP  │         │         │         │         │         │
+    //  PAGE UP  │         │         │         │         │         │
-//           │  BTN 4  │  MOUSE  │  MOUSE  │  MOUSE  │         │
+    //           │  BTN 4  │  MOUSE  │  MOUSE  │  MOUSE  │         │
-//           │         │  LEFT   │  DOWN   │  RIGHT  │         │
+    //           │         │  LEFT   │  DOWN   │  RIGHT  │         │
-// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
+    // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
-// │         │         │         │         │         │         │
+    // │         │         │         │         │         │         │
-// │         │  BTN 3  │  WHEEL  │  WHEEL  │  WHEEL  │         │
+    // │         │  BTN 3  │  WHEEL  │  WHEEL  │  WHEEL  │         │
-// │         │         │  LEFT   │  DOWN   │  RIGHT  │         │
+    // │         │         │  LEFT   │  DOWN   │  RIGHT  │         │
-// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
+    // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
 
     [_MOUSE] = LAYOUT(
-    KC_MS_BTN5, _______,       KC_MS_WH_UP,   _______,        _______,    _______,
+                 KC_BTN5, _______, KC_WH_U, _______, _______,
-    _______,    KC_MS_BTN1,    KC_MS_UP,      KC_MS_BTN2,     TG(_MOUSE),
+                 _______, KC_BTN1, KC_MS_U, KC_BTN2, TG(_MOUSE),
-    KC_MS_BTN4, KC_MS_LEFT,    KC_MS_DOWN,    KC_MS_RIGHT,    _______,
+                 KC_BTN4, KC_MS_L, KC_MS_D, KC_MS_R, _______,
-    KC_MS_BTN3, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, _______
+        _______, KC_BTN3, KC_WH_L, KC_WH_D, KC_WH_R, _______
     ),
 
-// ADMIN LAYER
+    // ADMIN LAYER
-//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
+    //           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
-//           │         │         │         │         │         │
+    //           │         │         │         │         │         │
-//           │  RESET  │         │         │         │         │
+    //           │  RESET  │         │         │         │         │
-//  ROTORY   │         │         │         │         │         │
+    //  ROTARY   │         │         │         │         │         │
-//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
+    //  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE UP  │         │         │         │         │         │
+    //  PAGE DOWN│         │         │         │         │         │
-//           │    4    │    5    │    6    │    *    │         │
+    //           │    4    │    5    │    6    │    *    │         │
-//  ROTORY   │         │         │         │         │         │
+    //  ROTARY   │         │         │         │         │         │
-//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
+    //  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
-//  PAGE DOWN│         │         │         │         │         │
+    //  PAGE UP  │         │         │         │         │         │
-//           │    1    │    2    │    3    │         │         │
+    //           │    1    │    2    │    3    │         │         │
-//           │         │         │         │         │         │
+    //           │         │         │         │         │         │
-// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
+    // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
-// │         │         │         │         │         │         │
+    // │         │         │         │         │         │         │
-// │         │    0    │    .    │    =    │         │         │
+    // │         │    0    │    .    │    =    │         │         │
-// │         │         │         │         │         │         │
+    // │         │         │         │         │         │         │
-// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
+    // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
 
     [_ADMIN] = LAYOUT(
-    RESET,   _______, _______, _______, TG(_ADMIN), _______,
+                 RESET,   _______, _______, _______, TG(_ADMIN),
                  _______, _______, _______, _______, _______,
                  _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______
+        _______, _______, _______, _______, _______, _______
     ),
 };
 

keyboards/ckeys/thedora/keymaps/default/readme.md

@@ -1 +0,0 @@
-# The default keymap for the cKeys Handwire 101 4x4 keyboard.

keyboards/ckeys/thedora/readme.md

@@ -4,9 +4,9 @@
 
 A 4x5 keyboard with rotary encoder, QWIIC connector, and header pinouts for easy access to all pins on the Proton C. This keyboard was built for QMK exploration big and small. What will you discover next?
 
-Keyboard Maintainer: [brandenbyers](https://github.com/brandenbyers)  
+* Keyboard Maintainer: [brandenbyers](https://github.com/brandenbyers)
-Hardware Supported: theDora  
+* Hardware Supported: theDora
-Hardware Availability: [cKeys.org](https://ckeys.org)
+* Hardware Availability: [cKeys.org](https://ckeys.org)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/ckeys/thedora/rules.mk

@@ -6,17 +6,20 @@ BOARD = QMK_PROTON_C
 BOOTLOADER = stm32-dfu
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
-BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-AUDIO_ENABLE = yes
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = yes          # Audio output
+
 MIDI_ENABLE = yes           # MIDI support
-RGBLIGHT_ENABLE = no
 ENCODER_ENABLE = yes

keyboards/ckeys/thedora/thedora.c

@@ -1 +1,31 @@
+/* Copyright 2019 Branden Byers (@brandenbyers)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include "thedora.h"
+
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) {
+        return false;
+    }
+    if (index == 0) {
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    }
+    return true;
+}

keyboards/ckeys/thedora/thedora.h

@@ -1,21 +1,37 @@
+/* Copyright 2019 Branden Byers (@brandenbyers)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #pragma once
 
 #include "quantum.h"
 
+#define XXX KC_NO
+
 // This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments
-// The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
 #define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, \
+         k00, k01, k02, k03, k04, \
-    k06, k07, k08, k09, k10, \
+         k10, k11, k12, k13, k14, \
-    k11, k12, k13, k14, k15, \
+         k20, k21, k22, k23, k24, \
-    k16, k17, k18, k19, k20 \
+    k05, k30, k31, k32, k33, k34  \
 ) \
 { \
-    { k00, k01, k02, k03, k04, k05, }, \
+    { k00, k01, k02, k03, k04, k05 }, \
-    { k06, k07, k08, k09, k10 },       \
+    { k10, k11, k12, k13, k14, XXX }, \
-    { k11, k12, k13, k14, k15 },       \
+    { k20, k21, k22, k23, k24, XXX }, \
-    { k16, k17, k18, k19, k20 }        \
+    { k30, k31, k32, k33, k34, XXX }  \
 }
-

keyboards/cocoa40/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/contra/rules.mk

@@ -14,7 +14,7 @@ CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/converter/modelm101/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/converter/numeric_keypad_IIe/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/converter/usb_usb/ble/rules.mk

@@ -10,7 +10,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/copenhagen_click/click_pad_v1/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/coseyfannitutti/discipad/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/coseyfannitutti/discipline/rules.mk

@@ -19,7 +19,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/coseyfannitutti/mullet/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/coseyfannitutti/mulletpad/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/coseyfannitutti/mysterium/rules.mk

@@ -19,7 +19,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/crkbd/keymaps/blipson/blipsonfont.c

@@ -0,0 +1,232 @@
+// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
+// See gfxfont.h for newer custom bitmap font info.
+
+#include "progmem.h"
+
+// Standard ASCII 5x7 font
+const unsigned char font[] PROGMEM = {
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+  0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+  0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+  0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+  0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+  0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+  0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+  0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+  0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+  0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+  0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+  0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+  0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+  0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+  0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+  0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+  0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+  0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+  0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+  0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+  0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+  0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+  0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+  0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+  0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+  0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+  0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+  0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+  0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+  0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+  0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+  0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+  0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+  0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+  0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+  0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+  0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+  0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+  0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+  0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+  0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+  0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+  0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+  0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+  0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+  0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+  0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+  0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+  0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+  0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+  0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+  0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+  0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+  0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+  0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+  0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+  0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+  0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+  0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+  0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+  0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+  0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+  0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+  0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+  0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+  0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+  0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+  0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+  0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+  0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+  0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+  0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+  0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+  0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+  0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+  0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+  0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+  0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+  0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+  0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+  0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+  0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+  0x18, 0x24, 0x24, 0x1C, 0x18, 0x00,
+  0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+  0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+  0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+  0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+  0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+  0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+  0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+  0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+  0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+  0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+  0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+  0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+  0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+  0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+  0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+  0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+  0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+  0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+  0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+  0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0xE0, 0xE0, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0xFC, 0xFC,
+  0xFC, 0xFC, 0xFC, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0xC0, 0xC0, 0x00, 0x00, 0x80,
+  0xC0, 0xE0, 0x60, 0x60, 0xE0, 0xC0,
+  0x80, 0x00, 0x00, 0x80, 0xC0, 0xC0,
+  0xC0, 0x80, 0x00, 0x00, 0x00, 0x00,
+  0x80, 0xC0, 0xC0, 0xC0, 0x80, 0x00,
+  0x00, 0x00, 0xC0, 0x80, 0xC0, 0xC0,
+  0xC0, 0x80, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+  0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+  0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+  0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+  0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+  0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+  0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+  0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0xFF, 0xFF, 0x30, 0x18, 0x18, 0x38,
+  0xF0, 0xE0, 0x00, 0x00, 0xFF, 0xFF,
+  0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0xFE, 0xFE, 0x00, 0x00, 0xFF,
+  0xFF, 0x18, 0x30, 0x30, 0x38, 0x1F,
+  0x0F, 0x00, 0x8F, 0x1F, 0x38, 0x30,
+  0x70, 0xE3, 0xC7, 0x00, 0x00, 0xFF,
+  0xFF, 0x01, 0x00, 0x01, 0xFF, 0xFF,
+  0x00, 0x00, 0xFF, 0xFF, 0x01, 0x00,
+  0x01, 0xFF, 0xFF, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+  0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+  0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+  0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+  0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+  0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+  0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+  0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x03, 0x07, 0x0E, 0x0C, 0x0C, 0x0E,
+  0x07, 0x03, 0x00, 0x00, 0x0F, 0x0F,
+  0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
+  0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x00,
+  0x00, 0x0F, 0x0F, 0x00, 0x00, 0x3F,
+  0x3F, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x03, 0x07, 0x0C, 0x0C,
+  0x0E, 0x07, 0x03, 0x00, 0x00, 0x03,
+  0x07, 0x0E, 0x0C, 0x0E, 0x07, 0x03,
+  0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
+  0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};

keyboards/crkbd/keymaps/blipson/config.h

@@ -0,0 +1,51 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2015 Jack Humbert
+Copyright 2020 Ben Lipson <ben.j.lipson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Select hand configuration */
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+#ifdef RGBLIGHT_ENABLE
+    #undef RGBLED_NUM
+    #define RGBLIGHT_EFFECT_BREATHING
+    #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+    #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+    #define RGBLIGHT_EFFECT_SNAKE
+    #define RGBLIGHT_EFFECT_KNIGHT
+    #define RGBLIGHT_EFFECT_CHRISTMAS
+    #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+    // #define RGBLIGHT_EFFECT_RGB_TEST
+    // #define RGBLIGHT_EFFECT_ALTERNATING
+    #define RGBLIGHT_EFFECT_TWINKLE
+    #define RGBLED_NUM 27
+    #define RGBLIGHT_LIMIT_VAL 120
+    #define RGBLIGHT_HUE_STEP 10
+    #define RGBLIGHT_SAT_STEP 17
+    #define RGBLIGHT_VAL_STEP 17
+#endif
+
+#define OLED_FONT_H "keyboards/crkbd/keymaps/blipson/blipsonfont.c"
+#define SPLIT_LAYER_STATE_ENABLE

keyboards/crkbd/keymaps/blipson/keymap.c

@@ -0,0 +1,139 @@
+/*
+Copyright 2019 @foostan
+Copyright 2020 Ben Lipson <ben.j.lipson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [0] = LAYOUT_split_3x6_3(
+   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                         KC_Y,    KC_U,  KC_I,    KC_O,   KC_P,  KC_BSPC,
+   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+       KC_LCTL,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                        KC_H,    KC_J,  KC_K,    KC_L,   KC_SCLN, KC_QUOT,
+   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+       KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                        KC_N,    KC_M,  KC_COMM, KC_DOT, KC_SLSH,  KC_RSFT,
+   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                           MO(1),  KC_LGUI, KC_SPC,     KC_SPC,  KC_RALT, MO(2)
+                                       //`--------------------------'  `--------------------------'
+
+   ),
+
+   [1] = LAYOUT_split_3x6_3(
+   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_GRV,  KC_EXLM, KC_AT,  KC_HASH,  KC_DLR,  KC_PERC,                     KC_CIRC, KC_AMPR, KC_UP,   KC_LPRN, KC_RPRN, KC_BSLS,
+   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+       KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                     XXXXXXX, KC_LEFT, KC_DOWN, KC_RIGHT, XXXXXXX, KC_ENT,
+   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+       KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                     KC_INS,  KC_END,  KC_HOME, KC_PGDN,  KC_PGUP, KC_RSFT,
+   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                           _______, KC_LGUI, KC_SPC,    KC_SPC,  KC_RALT,  MO(3)
+                                       //`--------------------------'  `--------------------------'
+   ),
+
+   [2] = LAYOUT_split_3x6_3(
+   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
+       KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                         KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+       KC_LCTL, KC_ASTR, KC_MINS, KC_PLUS, KC_LCBR, KC_RCBR,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
+       KC_BSLS, KC_PIPE, KC_UNDS, KC_EQL,  KC_LBRC, KC_RBRC,                      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
+                                           MO(3),  KC_LGUI,  KC_SPC,    KC_SPC, KC_RALT, _______
+                                       //`--------------------------'  `--------------------------'
+   ),
+
+   [3] = LAYOUT_split_3x6_3(
+   //,-------------------------------------------------------------------------------.                    ,------------------------------------------------------------------.
+       KC_ESC,    KC_F1,       KC_F2,         KC_F3,          KC_F4,     KC_F5,                            KC_F6,       KC_F7,       KC_F8,       KC_F9,   KC_F10,  RESET,
+   //|----------+------------+--------------+---------------+-----------+------------|                    |------------+------------+------------+--------+--------+---------|
+       KC_LCTL,   A(KC_F12),   A(G(KC_LEFT)), A(G(KC_RIGHT)), S(KC_F6),  C(S(KC_D)),                       C(S(KC_R)),  G(KC_LBRC),  G(KC_RBRC),  KC_F11,  KC_F12, KC_MPLY,
+   //|----------+------------+--------------+---------------+-----------+------------|                    |------------+------------+------------+--------+--------+---------|
+       G(KC_F2), A(G(KC_F)),  KC_MUTE,       KC__VOLDOWN,     KC__VOLUP, G(KC_GRV),                        C(G(KC_G)),  KC_TAB,      S(KC_TAB),   KC_BRID, KC_BRIU, KC_CAPS,
+   //|----------+------------+--------------+---------------+-----------+------------+--------|  |--------+------------+------------+------------+--------+--------+---------|
+                                                             _______,    KC_LGUI,     KC_SPC,     KC_SPC,   KC_RALT,     _______
+                                                         //`----------------------------------'  `-------------------------------'
+   )
+ };
+
+#ifdef OLED_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (!is_keyboard_left()) {
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  }
+  return rotation;
+}
+
+#define L_BASE 0
+#define L_LOWER 2
+#define L_RAISE 4
+#define L_ADJUST 8
+
+void oled_render_layer_state(void) {
+    oled_write_P(PSTR("Layer: "), false);
+    switch (layer_state) {
+        case L_BASE:
+            oled_write_ln_P(PSTR("Default"), false);
+            break;
+        case L_LOWER:
+            oled_write_ln_P(PSTR("Lower"), false);
+            break;
+        case L_RAISE:
+            oled_write_ln_P(PSTR("Raise"), false);
+            break;
+        case L_ADJUST:
+        case L_ADJUST|L_LOWER:
+        case L_ADJUST|L_RAISE:
+        case L_ADJUST|L_LOWER|L_RAISE:
+            oled_write_ln_P(PSTR("Adjust"), false);
+            break;
+    }
+    oled_write_P(PSTR("I love Marce"), false);
+}
+
+void render_bootmagic_status(bool status) {
+    /* Show Ctrl-Gui Swap options */
+    static const char PROGMEM logo[][2][3] = {
+        {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
+        {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
+    };
+    if (status) {
+        oled_write_ln_P(logo[0][0], false);
+        oled_write_ln_P(logo[0][1], false);
+    } else {
+        oled_write_ln_P(logo[1][0], false);
+        oled_write_ln_P(logo[1][1], false);
+    }
+}
+
+void oled_render_logo(void) {
+    static const char PROGMEM crkbd_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(crkbd_logo, false);
+}
+
+void oled_task_user(void) {
+    if (is_keyboard_master()) {
+        oled_render_layer_state();
+    } else {
+        oled_render_logo();
+    }
+}
+
+#endif // OLED_ENABLE

keyboards/crkbd/keymaps/blipson/readme.md

@@ -0,0 +1,10 @@
+# bLipson
+a keymap for the CRKBD/Corne geared towards professional software development on MacOS.
+
+#### Meant for use with the following tools:
+
+- [Intellij IDEA](https://www.jetbrains.com/idea/)
+- [Rectangle](https://rectangleapp.com/)
+
+## Building
+`make crkbd:blipson`

keyboards/crkbd/keymaps/blipson/rules.mk

@@ -0,0 +1,3 @@
+OLED_ENABLE = yes
+RGBLIGHT_ENABLE = no
+AUDIO_ENABLE = no

keyboards/cu24/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 RGBLIGHT_ENABLE = yes       # RGB drivers

keyboards/dc01/arrow/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in

keyboards/dc01/left/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 

keyboards/dc01/numpad/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in

keyboards/dc01/right/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in

keyboards/dm9records/plaid/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/dm9records/tartan/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/doro67/multi/keymaps/konstantin/config.h

@@ -1,6 +1,4 @@
 #pragma once
 
-#define DYNAMIC_KEYMAP_LAYER_COUNT 3
-
 #define LAYER_FN
 #define LAYER_NUMPAD

keyboards/doro67/multi/keymaps/konstantin/rules.mk

@@ -1,5 +1,5 @@
 # Generic features
-BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite
+BOOTMAGIC_ENABLE   = yes
 COMMAND_ENABLE     = yes
 CONSOLE_ENABLE     = yes
 EXTRAKEY_ENABLE    = yes

keyboards/doro67/multi/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no        # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no             # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no         # Enable keyboard RGB underglow
 UNICODE_ENABLE = no          # Unicode
 AUDIO_ENABLE = no            # Audio output on port C6

keyboards/doro67/regular/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/doro67/rgb/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/dp60/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 RGBLIGHT_ENABLE = no        # Use RGB underglow light

keyboards/dz60/keymaps/konstantin_b/rules.mk

@@ -1,13 +1,21 @@
-BACKLIGHT_ENABLE   = no
+USER_NAME := konstantin
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
+
+# Generic features
+BOOTMAGIC_ENABLE   = yes
 COMMAND_ENABLE     = yes
 CONSOLE_ENABLE     = yes
 EXTRAKEY_ENABLE    = yes
 MOUSEKEY_ENABLE    = yes
 NKRO_ENABLE        = yes
-RGBLIGHT_ENABLE    = no
-SPACE_CADET_ENABLE = no
 TAP_DANCE_ENABLE   = yes
 UNICODEMAP_ENABLE  = no
 
-USER_NAME = konstantin
+# Keyboard-specific features
+BACKLIGHT_ENABLE   = no
+RGBLIGHT_ENABLE    = no
+VIA_ENABLE         = yes
+
+# Firmware size reduction
+GRAVE_ESC_ENABLE   = no
+MAGIC_ENABLE       = no
+SPACE_CADET_ENABLE = no

keyboards/ep/40/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/ep/96/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/ep/comsn/hs68/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/ep/comsn/mollydooker/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/ep/comsn/tf_longeboye/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/ericrlau/numdiscipline/rev1/rules.mk

@@ -19,7 +19,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/evyd13/wasdat/keymaps/konstantin/config.h

@@ -1,6 +1,4 @@
 #pragma once
 
-#define DYNAMIC_KEYMAP_LAYER_COUNT 3
-
 #define LAYER_FN
 #define LAYER_NUMPAD

keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk

@@ -1,5 +1,5 @@
 # Generic features
-BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite
+BOOTMAGIC_ENABLE   = yes
 COMMAND_ENABLE     = yes
 CONSOLE_ENABLE     = yes
 EXTRAKEY_ENABLE    = yes

keyboards/exclusive/e6_rgb/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes 		    # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6
 RGBLIGHT_ENABLE = yes       # Use RGB underglow light

keyboards/exclusive/e6v2/le/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/exclusive/e6v2/le_bmc/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 WS2812_DRIVER = i2c
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode

keyboards/exclusive/e6v2/oe/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = no        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6

keyboards/exclusive/e6v2/oe_bmc/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 WS2812_DRIVER = i2c
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode

keyboards/flehrad/downbubble/rules.mk

@@ -16,7 +16,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 UNICODE_ENABLE = no         # Unicode
 AUDIO_ENABLE = no           # Audio output on port C6