[Keyboard] Add meson keyboard (#6482)

* Add meson keyboard

* Apply suggestions from code review

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Added soft reset and layer 3

* bootmagic light

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
daktil_manuform
Luciano Malavasi 2019-08-09 18:38:13 -07:00 committed by Drashna Jaelre
parent 9114d6ebe9
commit b93e1309e5
9 changed files with 579 additions and 0 deletions

View File

@ -0,0 +1,172 @@
/*
Copyright 2019 Luciano M
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0001
#define MANUFACTURER Luciano M
#define PRODUCT Meson
#define DESCRIPTION 3x14 split keyboard with two thumb keys per side
/* key matrix size */
#define MATRIX_ROWS 8 // 4 rows each half
#define MATRIX_COLS 7
#define MATRIX_ROW_PINS { F7, C6, F6, F5 }
#define MATRIX_COL_PINS { D4, D7, E6, B3, B2, B6, F4 }
// #define UNUSED_PINS
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
#define USE_I2C
#define SOFT_SERIAL_PIN D0
#define RGB_DI_PIN B5
#ifdef RGB_DI_PIN
#define RGBLED_NUM 10
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 5, 5 }
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_ANIMATIONS
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
/* defined by default; to change, uncomment and set to the combination you want */
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP H
//#define MAGIC_KEY_HELP_ALT SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER0_ALT GRAVE
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER B
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0

View File

@ -0,0 +1,108 @@
{
"keyboard_name": "Meson",
"keyboard_folder": "meson",
"maintainer": "qmk",
"width": 15.5,
"height": 4,
"layouts": {
"LAYOUT": {
"layout": [
{"label": "", "x": 0, "y": 0},
{"label": "", "x": 1, "y": 0},
{"label": "", "x": 2, "y": 0},
{"label": "", "x": 3, "y": 0},
{"label": "", "x": 4, "y": 0},
{"label": "", "x": 5, "y": 0},
{"label": "", "x": 6, "y": 0},
{"label": "", "x": 8.5, "y": 0},
{"label": "", "x": 9.5, "y": 0},
{"label": "", "x": 10.5, "y": 0},
{"label": "", "x": 11.5, "y": 0},
{"label": "", "x": 12.5, "y": 0},
{"label": "", "x": 13.5, "y": 0},
{"label": "", "x": 14.5, "y": 0},
{"label": "", "x": 0, "y": 1},
{"label": "", "x": 1, "y": 1},
{"label": "", "x": 2, "y": 1},
{"label": "", "x": 3, "y": 1},
{"label": "", "x": 4, "y": 1},
{"label": "", "x": 5, "y": 1},
{"label": "", "x": 6, "y": 1},
{"label": "", "x": 8.5, "y": 1},
{"label": "", "x": 9.5, "y": 1},
{"label": "", "x": 10.5, "y": 1},
{"label": "", "x": 11.5, "y": 1},
{"label": "", "x": 12.5, "y": 1},
{"label": "", "x": 13.5, "y": 1},
{"label": "", "x": 14.5, "y": 1},
{"label": "", "x": 0, "y": 2},
{"label": "", "x": 1, "y": 2},
{"label": "", "x": 2, "y": 2},
{"label": "", "x": 3, "y": 2},
{"label": "", "x": 4, "y": 2},
{"label": "", "x": 5, "y": 2},
{"label": "", "x": 6, "y": 2},
{"label": "", "x": 8.5, "y": 2},
{"label": "", "x": 9.5, "y": 2},
{"label": "", "x": 10.5, "y": 2},
{"label": "", "x": 11.5, "y": 2},
{"label": "", "x": 12.5, "y": 2},
{"label": "", "x": 13.5, "y": 2},
{"label": "", "x": 14.5, "y": 2},
{"label": "", "x": 4, "y": 3},
{"label": "", "x": 5, "y": 3},
{"label": "", "x": 9.5, "y": 3},
{"label": "", "x": 10.5, "y": 3}
]
},
"LAYOUT_2u": {
"layout": [
{"label": "", "x": 0, "y": 0},
{"label": "", "x": 1, "y": 0},
{"label": "", "x": 2, "y": 0},
{"label": "", "x": 3, "y": 0},
{"label": "", "x": 4, "y": 0},
{"label": "", "x": 5, "y": 0},
{"label": "", "x": 6, "y": 0},
{"label": "", "x": 8.5, "y": 0},
{"label": "", "x": 9.5, "y": 0},
{"label": "", "x": 10.5, "y": 0},
{"label": "", "x": 11.5, "y": 0},
{"label": "", "x": 12.5, "y": 0},
{"label": "", "x": 13.5, "y": 0},
{"label": "", "x": 14.5, "y": 0},
{"label": "", "x": 0, "y": 1},
{"label": "", "x": 1, "y": 1},
{"label": "", "x": 2, "y": 1},
{"label": "", "x": 3, "y": 1},
{"label": "", "x": 4, "y": 1},
{"label": "", "x": 5, "y": 1},
{"label": "", "x": 6, "y": 1},
{"label": "", "x": 8.5, "y": 1},
{"label": "", "x": 9.5, "y": 1},
{"label": "", "x": 10.5, "y": 1},
{"label": "", "x": 11.5, "y": 1},
{"label": "", "x": 12.5, "y": 1},
{"label": "", "x": 13.5, "y": 1},
{"label": "", "x": 14.5, "y": 1},
{"label": "", "x": 0, "y": 2},
{"label": "", "x": 1, "y": 2},
{"label": "", "x": 2, "y": 2},
{"label": "", "x": 3, "y": 2},
{"label": "", "x": 4, "y": 2},
{"label": "", "x": 5, "y": 2},
{"label": "", "x": 6, "y": 2},
{"label": "", "x": 8.5, "y": 2},
{"label": "", "x": 9.5, "y": 2},
{"label": "", "x": 10.5, "y": 2},
{"label": "", "x": 11.5, "y": 2},
{"label": "", "x": 12.5, "y": 2},
{"label": "", "x": 13.5, "y": 2},
{"label": "", "x": 14.5, "y": 2},
{"label": "", "x": 4, "y": 3, "w": 2},
{"label": "", "x": 9.5, "y": 3, "w": 2}
]
}
}
}

View File

@ -0,0 +1,19 @@
/* Copyright 2019 Luciano M
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
// place overrides here

View File

@ -0,0 +1,78 @@
/* Copyright 2019 Luciano M
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines the keycodes used by our macros in process_record_user
enum custom_keycodes {
MESON = SAFE_RANGE,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT( /* Base */
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TAB, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LALT, KC_GRV, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT,
MO(1), KC_SPC, KC_SPC, MO(2)
),
[1] = LAYOUT( /* Symbols */
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TAB, KC_BSLS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, RGB_VAI,
KC_LCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_VAD,
KC_LSFT, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, MESON, RGB_MOD,
MO(1), KC_SPC, KC_SPC, MO(3)
),
[2] = LAYOUT( /* Numbers */
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TAB, KC_BSLS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_VOLU,
KC_LCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD,
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_LGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_MPRV, KC_MNXT, KC_MPLY,
MO(3), KC_SPC, KC_SPC, MO(2)
),
[3] = LAYOUT( /* Reset, other functions if you want */
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case MESON:
if (record->event.pressed) {
// when keycode MESON is pressed
SEND_STRING("Meson macro working");
} else {
// when keycode MESON is released
}
break;
}
return true;
}
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
void led_set_user(uint8_t usb_led) {
}

View File

@ -0,0 +1 @@
# The default keymap for meson

View File

@ -0,0 +1,51 @@
/* Copyright 2019 Luciano M
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "meson.h"
// Optional override functions below.
// You can leave any or all of these undefined.
// These are only required if you want to perform custom actions.
/*
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}
*/

View File

@ -0,0 +1,56 @@
/* Copyright 2019 Luciano M
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define ___ KC_NO
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, R06, R05, R04, R03, R02, R01, R00, \
L10, L11, L12, L13, L14, L15, L16, R16, R15, R14, R13, R12, R11, R10, \
L20, L21, L22, L23, L24, L25, L26, R26, R25, R24, R23, R22, R21, R20, \
L30, L31, R31, R30 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06}, \
{ L10, L11, L12, L13, L14, L15, L16}, \
{ L20, L21, L22, L23, L24, L25, L26}, \
{ ___, ___, ___, ___, L30, L31, ___}, \
{ R00, R01, R02, R03, R04, R05, R06}, \
{ R10, R11, R12, R13, R14, R15, R16}, \
{ R20, R21, R22, R23, R24, R25, R26}, \
{ ___, ___, ___, ___, R30, R31, ___}, \
}
// 2u SPACEBAR LAYOUT, DON'T FORGET TO CHANGE NAME OF LAYOUTS IN KEYMAP.C
#define LAYOUT_2u( \
L00, L01, L02, L03, L04, L05, L06, R06, R05, R04, R03, R02, R01, R00, \
L10, L11, L12, L13, L14, L15, L16, R16, R15, R14, R13, R12, R11, R10, \
L20, L21, L22, L23, L24, L25, L26, R26, R25, R24, R23, R22, R21, R20, \
L30, R30 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06}, \
{ L10, L11, L12, L13, L14, L15, L16}, \
{ L20, L21, L22, L23, L24, L25, L26}, \
{ ___, ___, ___, ___, L30, ___, ___},\
{ R00, R01, R02, R03, R04, R05, R06}, \
{ R10, R11, R12, R13, R14, R15, R16}, \
{ R20, R21, R22, R23, R24, R25, R26}, \
{ ___, ___, ___, ___, R30, ___, ___},\
}

View File

@ -0,0 +1,13 @@
# meson
A 3x14 split keyboard with two thumb keys on each half. Supports MX, Alps, and Choc reversible.
Keyboard Maintainer: [PyroL](https://github.com/PyrooL)
Hardware Supported: Meson PCBs, Pro Micro
Hardware Availability: [open source at PyroL's Github](https://github.com/PyrooL/Meson)
Make example for this keyboard (after setting up your build environment):
make meson:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,81 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = caterina
# If you don't know the bootloader type, then you can specify the
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
SPLIT_KEYBOARD = yes
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)