NK65 Addition (#5865)
* Nk65 initial commit * Minor fix for compatibility * Make everything pretty * Update keyboards/nk65/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/nk65/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Chmod Dummy * Update getting_started_introduction.md * Revert "Update getting_started_introduction.md" This reverts commit daf446acf7ae4ae00488b389ce04f2cfca708d44.master
yiancar
MechMerlin
parent
8680c50d07
commit
acd3e79add
|
|
@ -75,10 +75,10 @@ uint8_t g_twi_transfer_buffer[20];
|
|||
// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
|
||||
// probably not worth the extra complexity.
|
||||
uint8_t g_pwm_buffer[DRIVER_COUNT][192];
|
||||
bool g_pwm_buffer_update_required = false;
|
||||
bool g_pwm_buffer_update_required[DRIVER_COUNT] = { false };
|
||||
|
||||
uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
|
||||
bool g_led_control_registers_update_required = false;
|
||||
bool g_led_control_registers_update_required[DRIVER_COUNT] = { false };
|
||||
|
||||
void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data )
|
||||
{
|
||||
|
|
@ -123,12 +123,13 @@ void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
|
|||
}
|
||||
}
|
||||
|
||||
void IS31FL3733_init( uint8_t addr )
|
||||
void IS31FL3733_init( uint8_t addr, uint8_t sync)
|
||||
{
|
||||
// In order to avoid the LEDs being driven with garbage data
|
||||
// in the LED driver's PWM registers, shutdown is enabled last.
|
||||
// Set up the mode and other settings, clear the PWM registers,
|
||||
// then disable software shutdown.
|
||||
// Sync is passed so set it according to the datasheet.
|
||||
|
||||
// Unlock the command register.
|
||||
IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
|
||||
|
|
@ -161,7 +162,7 @@ void IS31FL3733_init( uint8_t addr )
|
|||
// Set global current to maximum.
|
||||
IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
|
||||
// Disable software shutdown.
|
||||
IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
|
||||
IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01 );
|
||||
|
||||
// Wait 10ms to ensure the device has woken up.
|
||||
#ifdef __AVR__
|
||||
|
|
@ -179,7 +180,7 @@ void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
|
|||
g_pwm_buffer[led.driver][led.r] = red;
|
||||
g_pwm_buffer[led.driver][led.g] = green;
|
||||
g_pwm_buffer[led.driver][led.b] = blue;
|
||||
g_pwm_buffer_update_required = true;
|
||||
g_pwm_buffer_update_required[led.driver] = true;
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -218,35 +219,34 @@ void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, b
|
|||
g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
|
||||
}
|
||||
|
||||
g_led_control_registers_update_required = true;
|
||||
g_led_control_registers_update_required[led.driver] = true;
|
||||
|
||||
}
|
||||
|
||||
void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
|
||||
void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index )
|
||||
{
|
||||
if ( g_pwm_buffer_update_required )
|
||||
if ( g_pwm_buffer_update_required[index] )
|
||||
{
|
||||
// Firstly we need to unlock the command register and select PG1
|
||||
IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
|
||||
IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
|
||||
IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
|
||||
IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
|
||||
|
||||
IS31FL3733_write_pwm_buffer( addr1, g_pwm_buffer[0] );
|
||||
//IS31FL3733_write_pwm_buffer( addr2, g_pwm_buffer[1] );
|
||||
IS31FL3733_write_pwm_buffer( addr, g_pwm_buffer[index] );
|
||||
}
|
||||
g_pwm_buffer_update_required = false;
|
||||
g_pwm_buffer_update_required[index] = false;
|
||||
}
|
||||
|
||||
void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
|
||||
void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index )
|
||||
{
|
||||
if ( g_led_control_registers_update_required )
|
||||
if ( g_led_control_registers_update_required[index] )
|
||||
{
|
||||
// Firstly we need to unlock the command register and select PG0
|
||||
IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
|
||||
IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
|
||||
IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
|
||||
IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
|
||||
for ( int i=0; i<24; i++ )
|
||||
{
|
||||
IS31FL3733_write_register(addr1, i, g_led_control_registers[0][i] );
|
||||
//IS31FL3733_write_register(addr2, i, g_led_control_registers[1][i] );
|
||||
IS31FL3733_write_register(addr, i, g_led_control_registers[index][i] );
|
||||
}
|
||||
}
|
||||
g_led_control_registers_update_required[index] = false;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@ typedef struct is31_led {
|
|||
|
||||
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
|
||||
|
||||
void IS31FL3733_init( uint8_t addr );
|
||||
void IS31FL3733_init( uint8_t addr, uint8_t sync );
|
||||
void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data );
|
||||
void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
|
||||
|
||||
|
|
@ -45,8 +45,8 @@ void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, b
|
|||
// (eg. from a timer interrupt).
|
||||
// Call this while idle (in between matrix scans).
|
||||
// If the buffer is dirty, it will update the driver with the buffer.
|
||||
void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
|
||||
void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
|
||||
void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index );
|
||||
void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index );
|
||||
|
||||
#define A_1 0x00
|
||||
#define A_2 0x01
|
||||
|
|
|
|||
|
|
@ -0,0 +1,126 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
const PALConfig pal_default_config = {
|
||||
#if STM32_HAS_GPIOA
|
||||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
|
||||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB
|
||||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
|
||||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC
|
||||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
|
||||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD
|
||||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
|
||||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE
|
||||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
|
||||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF
|
||||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
|
||||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG
|
||||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
|
||||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH
|
||||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
|
||||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI
|
||||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
|
||||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
void enter_bootloader_mode_if_requested(void);
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details This initialization must be performed just after stack setup
|
||||
* and before any other initialization.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
enter_bootloader_mode_if_requested();
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
#if HAL_USE_SDC || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief SDC card detection.
|
||||
*/
|
||||
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
|
||||
|
||||
(void)sdcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SDC card write protection detection.
|
||||
*/
|
||||
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
|
||||
|
||||
(void)sdcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif /* HAL_USE_SDC */
|
||||
|
||||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief MMC_SPI card detection.
|
||||
*/
|
||||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief MMC_SPI card write protection detection.
|
||||
*/
|
||||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Board-specific initialization code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
}
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,5 @@
|
|||
# List of all the board related files.
|
||||
BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here:
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
|
||||
|
|
@ -0,0 +1,520 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/chconf.h
|
||||
* @brief Configuration file template.
|
||||
* @details A copy of this file must be placed in each project directory, it
|
||||
* contains the application specific kernel settings.
|
||||
*
|
||||
* @addtogroup config
|
||||
* @details Kernel related settings and hooks.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef CHCONF_H
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name System timers settings
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System time counter resolution.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#define CH_CFG_ST_RESOLUTION 32
|
||||
|
||||
/**
|
||||
* @brief System tick frequency.
|
||||
* @details Frequency of the system timer that drives the system ticks. This
|
||||
* setting also defines the system tick time unit.
|
||||
*/
|
||||
#define CH_CFG_ST_FREQUENCY 100000
|
||||
|
||||
/**
|
||||
* @brief Time delta constant for the tick-less mode.
|
||||
* @note If this value is zero then the system uses the classic
|
||||
* periodic tick. This value represents the minimum number
|
||||
* of ticks that is safe to specify in a timeout directive.
|
||||
* The value one is not valid, timeouts are rounded up to
|
||||
* this value.
|
||||
*/
|
||||
#define CH_CFG_ST_TIMEDELTA 2
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel parameters and options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Round robin interval.
|
||||
* @details This constant is the number of system ticks allowed for the
|
||||
* threads before preemption occurs. Setting this value to zero
|
||||
* disables the preemption for threads with equal priority and the
|
||||
* round robin becomes cooperative. Note that higher priority
|
||||
* threads can still preempt, the kernel is always preemptive.
|
||||
* @note Disabling the round robin preemption makes the kernel more compact
|
||||
* and generally faster.
|
||||
* @note The round robin preemption is not supported in tickless mode and
|
||||
* must be set to zero in that case.
|
||||
*/
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
* does not spawn the idle thread. The application @p main()
|
||||
* function becomes the idle thread and must implement an
|
||||
* infinite loop.
|
||||
*/
|
||||
#define CH_CFG_NO_IDLE_THREAD FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Performance options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief OS optimization.
|
||||
* @details If enabled then time efficient rather than space efficient code
|
||||
* is used when two possible implementations exist.
|
||||
*
|
||||
* @note This is not related to the compiler optimization options.
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_OPTIMIZE_SPEED TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Subsystem options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Time Measurement APIs.
|
||||
* @details If enabled then the time measurement APIs are included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_TM TRUE
|
||||
|
||||
/**
|
||||
* @brief Threads registry APIs.
|
||||
* @details If enabled then the registry APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_REGISTRY TRUE
|
||||
|
||||
/**
|
||||
* @brief Threads synchronization APIs.
|
||||
* @details If enabled then the @p chThdWait() function is included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_WAITEXIT TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores APIs.
|
||||
* @details If enabled then the Semaphores APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores queuing mode.
|
||||
* @details If enabled then the threads are enqueued on semaphores by
|
||||
* priority rather than in FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mutexes APIs.
|
||||
* @details If enabled then the mutexes APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Enables recursive behavior on mutexes.
|
||||
* @note Recursive mutexes are heavier and have an increased
|
||||
* memory footprint.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs.
|
||||
* @details If enabled then the conditional variables APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS TRUE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs with timeout.
|
||||
* @details If enabled then the conditional variables APIs with timeout
|
||||
* specification are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_CONDVARS.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs.
|
||||
* @details If enabled then the event flags APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS TRUE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs with timeout.
|
||||
* @details If enabled then the events APIs with timeout specification
|
||||
* are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_EVENTS.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages APIs.
|
||||
* @details If enabled then the synchronous messages APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages queuing mode.
|
||||
* @details If enabled then messages are served by priority rather than in
|
||||
* FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_MESSAGES.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY TRUE
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
* included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_MAILBOXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Core Memory Manager APIs.
|
||||
* @details If enabled then the core memory manager APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMCORE TRUE
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
|
||||
* @p CH_CFG_USE_SEMAPHORES.
|
||||
* @note Mutexes are recommended.
|
||||
*/
|
||||
#define CH_CFG_USE_HEAP TRUE
|
||||
|
||||
/**
|
||||
* @brief Memory Pools Allocator APIs.
|
||||
* @details If enabled then the memory pools allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMPOOLS TRUE
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#define CH_CFG_USE_DYNAMIC TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Debug options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Debug option, kernel statistics.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_STATISTICS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, system state check.
|
||||
* @details If enabled the correct call protocol for system APIs is checked
|
||||
* at runtime.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, parameters checks.
|
||||
* @details If enabled then the checks on the API functions input
|
||||
* parameters are activated.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_CHECKS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, consistency checks.
|
||||
* @details If enabled then all the assertions in the kernel code are
|
||||
* activated. This includes consistency checks inside the kernel,
|
||||
* runtime anomalies and port-defined checks.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_ASSERTS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, trace buffer.
|
||||
* @details If enabled then the trace buffer is activated.
|
||||
*
|
||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
|
||||
|
||||
/**
|
||||
* @brief Trace buffer entries.
|
||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
|
||||
* different from @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_BUFFER_SIZE 128
|
||||
|
||||
/**
|
||||
* @brief Debug option, stack checks.
|
||||
* @details If enabled then a runtime stack check is performed.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note The stack check is performed in a architecture/port dependent way.
|
||||
* It may not be implemented or some ports.
|
||||
* @note The default failure mode is to halt the system with the global
|
||||
* @p panic_msg variable set to @p NULL.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_STACK_CHECK TRUE
|
||||
|
||||
/**
|
||||
* @brief Debug option, stacks initialization.
|
||||
* @details If enabled then the threads working area is filled with a byte
|
||||
* value when a thread is created. This can be useful for the
|
||||
* runtime measurement of the used stack.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_FILL_THREADS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, threads profiling.
|
||||
* @details If enabled then a field is added to the @p thread_t structure that
|
||||
* counts the system ticks occurred while executing the thread.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note This debug option is not currently compatible with the
|
||||
* tickless mode.
|
||||
*/
|
||||
#define CH_DBG_THREADS_PROFILING FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel hooks
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Threads descriptor structure extension.
|
||||
* @details User fields added to the end of the @p thread_t structure.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief Threads initialization hook.
|
||||
* @details User initialization code added to the @p chThdInit() API.
|
||||
*
|
||||
* @note It is invoked from within @p chThdInit() and implicitly from all
|
||||
* the threads creation APIs.
|
||||
*/
|
||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads finalization hook.
|
||||
* @details User finalization code added to the @p chThdExit() API.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
|
||||
/* Add threads finalization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Context switch hook.
|
||||
* @details This hook is invoked just before switching between threads.
|
||||
*/
|
||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
|
||||
/* Context switch code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR enter hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
|
||||
/* IRQ prologue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR exit hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
|
||||
/* IRQ epilogue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread enter hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to activate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_ENTER_HOOK() { \
|
||||
/* Idle-enter code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread leave hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to deactivate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \
|
||||
/* Idle-leave code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle Loop hook.
|
||||
* @details This hook is continuously invoked by the idle thread loop.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LOOP_HOOK() { \
|
||||
/* Idle loop code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System tick event hook.
|
||||
* @details This hook is invoked in the system tick handler immediately
|
||||
* after processing the virtual timers queue.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \
|
||||
/* System tick event code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System halt hook.
|
||||
* @details This hook is invoked in case to a system halting error before
|
||||
* the system is halted.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
|
||||
/* System halt code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Trace hook.
|
||||
* @details This hook is invoked each time a new record is written in the
|
||||
* trace buffer.
|
||||
*/
|
||||
#define CH_CFG_TRACE_HOOK(tep) { \
|
||||
/* Trace code here.*/ \
|
||||
}
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Port-specific settings (override port settings defaulted in chcore.h). */
|
||||
/*===========================================================================*/
|
||||
|
||||
#endif /* CHCONF_H */
|
||||
|
||||
/** @} */
|
||||
|
|
@ -0,0 +1,154 @@
|
|||
/*
|
||||
Copyright 2019 Yiancar
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x8968
|
||||
#define PRODUCT_ID 0x4E4B
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Yiancar-Designs
|
||||
#define PRODUCT NK65
|
||||
#define DESCRIPTION A 65-percent, tool-free RGB keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
#define MATRIX_ROW_PINS { B3, B4, B5, A8, A4 }
|
||||
#define MATRIX_COL_PINS { A13, A10, A9, A14, A15, B8, B9, C13, C14, C15, A0, A1, A2, A3, A5 }
|
||||
// To enable debugger set A13 A14 -> A5 A7
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* Backlight options */
|
||||
|
||||
#define RGB_BACKLIGHT_ENABLED 1
|
||||
|
||||
#define RGB_BACKLIGHT_NK65
|
||||
|
||||
// they aren't really used if RGB_BACKLIGHT_HS60 defined
|
||||
#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
|
||||
#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
|
||||
#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
|
||||
#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
|
||||
#define RGB_BACKLIGHT_USE_ISO_ENTER 0
|
||||
#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
|
||||
|
||||
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
|
||||
#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
|
||||
|
||||
// disable backlight after timeout in minutes, 0 = no timeout
|
||||
#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
|
||||
|
||||
// the default brightness
|
||||
#define RGB_BACKLIGHT_BRIGHTNESS 255
|
||||
|
||||
// the default effect (RGB test)
|
||||
#define RGB_BACKLIGHT_EFFECT 255
|
||||
|
||||
// the default effect speed (0-3)
|
||||
#define RGB_BACKLIGHT_EFFECT_SPEED 0
|
||||
|
||||
// the default color1 and color2
|
||||
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
|
||||
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
|
||||
|
||||
#define DRIVER_COUNT 2
|
||||
#define DRIVER_LED_TOTAL 128
|
||||
|
||||
// These define which keys in the matrix are alphas/mods
|
||||
// Used for backlight effects so colors are different for
|
||||
// alphas vs. mods
|
||||
// Each value is for a row, bit 0 is column 0
|
||||
// Alpha=0 Mod=1
|
||||
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001
|
||||
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0100000000000001
|
||||
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0110000000000001
|
||||
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001
|
||||
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111111000000111
|
||||
|
||||
#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
|
||||
#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
|
||||
#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
|
||||
#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
|
||||
|
||||
// TODO: refactor with new user EEPROM code (coming soon)
|
||||
#define EEPROM_MAGIC 0x451F
|
||||
#define EEPROM_MAGIC_ADDR 32
|
||||
// Bump this every time we change what we store
|
||||
// This will automatically reset the EEPROM with defaults
|
||||
// and avoid loading invalid data from the EEPROM
|
||||
#define EEPROM_VERSION 0x08
|
||||
#define EEPROM_VERSION_ADDR 34
|
||||
|
||||
// Backlight config starts after EEPROM version
|
||||
#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
|
||||
// Dynamic keymap starts after backlight config (35+32)
|
||||
#define DYNAMIC_KEYMAP_EEPROM_ADDR 67
|
||||
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
|
||||
// Dynamic macro starts after dynamic keymaps (67+(4*5*15*2)) = (67+600)
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 667
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 398
|
||||
#define DYNAMIC_KEYMAP_MACRO_COUNT 16
|
||||
|
|
@ -0,0 +1,388 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/halconf.h
|
||||
* @brief HAL configuration header.
|
||||
* @details HAL configuration file, this file allows to enable or disable the
|
||||
* various device drivers from your application. You may also use
|
||||
* this file in order to override the device drivers default settings.
|
||||
*
|
||||
* @addtogroup HAL_CONF
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef HALCONF_H
|
||||
#define HALCONF_H
|
||||
|
||||
#include "mcuconf.h"
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PAL TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ADC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CAN FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_DAC TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the EXT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_EXT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_GPT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2C TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2S FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ICU FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MMC_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PWM FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the QSPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_QSPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_RTC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SDC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL_USB TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_UART FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USB TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WDG FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* ADC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CAN driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch.
|
||||
*/
|
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
|
||||
#define CAN_USE_SLEEP_MODE TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* I2C driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus.
|
||||
*/
|
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_ZERO_COPY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MMC_SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
* This option is recommended also if the SPI driver does not
|
||||
* use a DMA channel and heavily loads the CPU.
|
||||
*/
|
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define MMC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SDC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card.
|
||||
* @note Attempts are performed at 10mS intervals.
|
||||
*/
|
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_RETRY 100
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards.
|
||||
* @note MMC support is not yet implemented so this option must be kept
|
||||
* at @p FALSE.
|
||||
*/
|
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
|
||||
#define SDC_MMC_SUPPORT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
*/
|
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define SDC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Default bit rate.
|
||||
* @details Configuration parameter, this is the baud rate selected for the
|
||||
* default configuration.
|
||||
*/
|
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_DEFAULT_BITRATE 38400
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial buffers size.
|
||||
* @details Configuration parameter, you can change the depth of the queue
|
||||
* buffers depending on the requirements of your application.
|
||||
* @note The default is 16 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_BUFFERS_SIZE 16
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL_USB driver related setting. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size.
|
||||
* @details Configuration parameter, the buffer size must be a multiple of
|
||||
* the USB data endpoint maximum packet size.
|
||||
* @note The default is 256 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_SIZE 1
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial over USB number of buffers.
|
||||
* @note The default is 2 buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_NUMBER 2
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* UART driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define UART_USE_WAIT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define UART_USE_MUTUAL_EXCLUSION FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* USB driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define USB_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
#endif /* HALCONF_H */
|
||||
|
||||
/** @} */
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
{
|
||||
"keyboard_name": "NK65",
|
||||
"url": "",
|
||||
"maintainer": "yiancar",
|
||||
"width": 16,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Page Up", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Page Down", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,58 @@
|
|||
/* Copyright 2019 Yiancar
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_65_ansi( /* Base */
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,\
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,\
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,\
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
[1] = LAYOUT_65_ansi( /* FN */
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
|
||||
[2] = LAYOUT_65_ansi( /* Empty for dynamic keymaps */
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
|
||||
[3] = LAYOUT_65_ansi( /* Empty for dynamic keymaps */
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
};
|
||||
|
||||
void matrix_init_user(void) {
|
||||
//user initialization
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
//user matrix
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
The default keymap for NK65. VIA support disabled.
|
||||
=========================================================
|
||||
|
||||
|
||||
|
||||
Default layer is normal ANSI 65%
|
||||
|
|
@ -0,0 +1,58 @@
|
|||
/* Copyright 2019 Yiancar
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_65_ansi( /* Base */
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,\
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,\
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,\
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
[1] = LAYOUT_65_ansi( /* FN */
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
|
||||
[2] = LAYOUT_65_ansi( /* Empty for dynamic keymaps */
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
|
||||
[3] = LAYOUT_65_ansi( /* Empty for dynamic keymaps */
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
};
|
||||
|
||||
void matrix_init_user(void) {
|
||||
//user initialization
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
//user matrix
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
The default keymap for NK65. VIA support enabled.
|
||||
=========================================================
|
||||
|
||||
|
||||
|
||||
Default layer is normal ANSI 65%
|
||||
|
|
@ -0,0 +1,67 @@
|
|||
# project specific files
|
||||
SRC = keyboards/zeal60/zeal60.c \
|
||||
keyboards/zeal60/rgb_backlight.c \
|
||||
drivers/issi/is31fl3733.c \
|
||||
quantum/color.c \
|
||||
drivers/arm/i2c_master.c
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F3xx
|
||||
|
||||
# Linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F303xC
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f3xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = GENERIC_STM32_F303XC
|
||||
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
|
||||
USE_FPU = yes
|
||||
|
||||
# Vector table for application
|
||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
||||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
||||
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
|
||||
OPT_DEFS =
|
||||
|
||||
# Do not put the microcontroller into power saving mode
|
||||
# when we get USB suspend event. We want it to keep updating
|
||||
# backlight effects.
|
||||
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
|
||||
#SERIAL_LINK_ENABLE = yes
|
||||
|
||||
RAW_ENABLE = yes
|
||||
DYNAMIC_KEYMAP_ENABLE = yes
|
||||
CIE1931_CURVE = yes
|
||||
|
|
@ -0,0 +1,257 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef MCUCONF_H
|
||||
#define MCUCONF_H
|
||||
|
||||
/*
|
||||
* STM32F3xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F3xx_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 9
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
|
||||
#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_USART2SW STM32_USART2SW_PCLK
|
||||
#define STM32_USART3SW STM32_USART3SW_PCLK
|
||||
#define STM32_UART4SW STM32_UART4SW_PCLK
|
||||
#define STM32_UART5SW STM32_UART5SW_PCLK
|
||||
#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
|
||||
#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
|
||||
#define STM32_TIM1SW STM32_TIM1SW_PCLK2
|
||||
#define STM32_TIM8SW STM32_TIM8SW_PCLK2
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
#define STM32_USB_CLOCK_REQUIRED TRUE
|
||||
#define STM32_USBPRE STM32_USBPRE_DIV1P5
|
||||
|
||||
#undef STM32_HSE_BYPASS
|
||||
// #error "oh no"
|
||||
// #endif
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_DUAL_MODE FALSE
|
||||
#define STM32_ADC_COMPACT_SAMPLES FALSE
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_USE_ADC2 FALSE
|
||||
#define STM32_ADC_USE_ADC3 FALSE
|
||||
#define STM32_ADC_USE_ADC4 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
|
||||
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
|
||||
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
|
||||
#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC2_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC3_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC4_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC3_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC4_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
|
||||
#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define STM32_CAN_USE_CAN1 FALSE
|
||||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
|
||||
|
||||
/*
|
||||
* DAC driver system settings.
|
||||
*/
|
||||
#define STM32_DAC_DUAL_MODE FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH1 TRUE
|
||||
#define STM32_DAC_USE_DAC1_CH2 TRUE
|
||||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI33_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 TRUE
|
||||
#define STM32_GPT_USE_TIM6 TRUE
|
||||
#define STM32_GPT_USE_TIM7 TRUE
|
||||
#define STM32_GPT_USE_TIM8 TRUE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM6_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM7_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 10
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 10
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_UART5 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 12
|
||||
#define STM32_SERIAL_USART2_PRIORITY 12
|
||||
#define STM32_SERIAL_USART3_PRIORITY 12
|
||||
#define STM32_SERIAL_UART4_PRIORITY 12
|
||||
#define STM32_SERIAL_UART5_PRIORITY 12
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART3_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
|
||||
|
||||
/*
|
||||
* WDG driver system settings.
|
||||
*/
|
||||
#define STM32_WDG_USE_IWDG FALSE
|
||||
|
||||
#endif /* MCUCONF_H */
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
/* Copyright 2019 Yiancar
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifndef RGB_BACKLIGHT_NK65
|
||||
#error RGB_BACKLIGHT_NK65 not defined, recheck config.h
|
||||
#endif
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
/* Copyright 2019 Yiancar
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define XXX KC_NO
|
||||
|
||||
#include "quantum.h"
|
||||
#include "../zeal60/rgb_backlight_keycodes.h"
|
||||
#include "../zeal60/zeal60_keycodes.h"
|
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
|
||||
#define LAYOUT_65_ansi( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \
|
||||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
|
||||
K40, K41, K42, K46, K49, K4A, K4B, K4C, K4D, K4E \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX, K1E }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \
|
||||
{ K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
|
||||
{ K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, K49, K4A, K4B, K4C, K4D, K4E } \
|
||||
}
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
NK65
|
||||
=========
|
||||
|
||||
[NK65]()
|
||||
|
||||
This is a standard fixed layout 65% PCB. It supports VIA and full per-key RGB.
|
||||
|
||||
Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)
|
||||
Hardware Supported: A 65% keyboard with STM32F303CC
|
||||
Hardware Availability: https://novelkeys.xyz/
|
||||
|
||||
Due to the RGB implementation, the NK65 is currently not compatible with community layouts.
|
||||
|
||||
## Instructions
|
||||
|
||||
### Build
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make nk65:default_via
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
### Reset
|
||||
|
||||
- Unplug
|
||||
- Hold Escape
|
||||
- Plug In
|
||||
- Unplug
|
||||
- Release Escape
|
||||
|
||||
### Flash
|
||||
|
||||
- Unplug
|
||||
- Hold Escape
|
||||
- Plug In
|
||||
- Flash using QMK Toolbox or dfu-util (`make nk65:<keymap>:dfu-util`)
|
||||
|
|
@ -0,0 +1,69 @@
|
|||
# project specific files
|
||||
SRC = keyboards/zeal60/zeal60.c \
|
||||
keyboards/zeal60/rgb_backlight.c \
|
||||
drivers/issi/is31fl3733.c \
|
||||
quantum/color.c \
|
||||
drivers/arm/i2c_master.c
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F3xx
|
||||
|
||||
# Linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F303xC
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f3xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = GENERIC_STM32_F303XC
|
||||
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
|
||||
USE_FPU = yes
|
||||
|
||||
# Vector table for application
|
||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
||||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
||||
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
|
||||
OPT_DEFS =
|
||||
|
||||
# Do not put the microcontroller into power saving mode
|
||||
# when we get USB suspend event. We want it to keep updating
|
||||
# backlight effects.
|
||||
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
|
||||
#SERIAL_LINK_ENABLE = yes
|
||||
|
||||
RAW_ENABLE = no
|
||||
DYNAMIC_KEYMAP_ENABLE = no
|
||||
CIE1931_CURVE = yes
|
||||
|
||||
LAYOUTS = 65_ansi
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -53,16 +53,16 @@ static void init(void) {
|
|||
#endif
|
||||
#else
|
||||
#ifdef LED_DRIVER_ADDR_1
|
||||
IS31FL3733_init(LED_DRIVER_ADDR_1);
|
||||
IS31FL3733_init(LED_DRIVER_ADDR_1, 0 );
|
||||
#endif
|
||||
#ifdef LED_DRIVER_ADDR_2
|
||||
IS31FL3733_init(LED_DRIVER_ADDR_2);
|
||||
IS31FL3733_init(LED_DRIVER_ADDR_2, 0 );
|
||||
#endif
|
||||
#ifdef LED_DRIVER_ADDR_3
|
||||
IS31FL3733_init(LED_DRIVER_ADDR_3);
|
||||
IS31FL3733_init(LED_DRIVER_ADDR_3, 0 );
|
||||
#endif
|
||||
#ifdef LED_DRIVER_ADDR_4
|
||||
IS31FL3733_init(LED_DRIVER_ADDR_4);
|
||||
IS31FL3733_init(LED_DRIVER_ADDR_4, 0 );
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -34,7 +34,7 @@ static void init( void )
|
|||
IS31FL3731_init( DRIVER_ADDR_1 );
|
||||
IS31FL3731_init( DRIVER_ADDR_2 );
|
||||
#elif defined(IS31FL3733)
|
||||
IS31FL3733_init( DRIVER_ADDR_1 );
|
||||
IS31FL3733_init( DRIVER_ADDR_1, 0 );
|
||||
#else
|
||||
IS31FL3737_init( DRIVER_ADDR_1 );
|
||||
#endif
|
||||
|
|
@ -53,7 +53,8 @@ static void init( void )
|
|||
#ifdef IS31FL3731
|
||||
IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
|
||||
#elif defined(IS31FL3733)
|
||||
IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
|
||||
IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, 0 );
|
||||
IS31FL3733_update_led_control_registers( DRIVER_ADDR_2, 1 );
|
||||
#else
|
||||
IS31FL3737_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
|
||||
#endif
|
||||
|
|
@ -74,7 +75,8 @@ const rgb_matrix_driver_t rgb_matrix_driver = {
|
|||
#elif defined(IS31FL3733)
|
||||
static void flush( void )
|
||||
{
|
||||
IS31FL3733_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
|
||||
IS31FL3733_update_pwm_buffers( DRIVER_ADDR_1, 0);
|
||||
IS31FL3733_update_pwm_buffers( DRIVER_ADDR_2, 1);
|
||||
}
|
||||
|
||||
const rgb_matrix_driver_t rgb_matrix_driver = {
|
||||
|
|
|
|||
Loading…
Reference in New Issue