Merge pull request #1445 from qmk/dual_audio

Allow for duophony (C6 and B5) and B5 audio
daktil_thumb_popravljen
Jack Humbert 2017-06-27 16:57:19 -04:00 committed by GitHub
commit a52836e669
6 changed files with 303 additions and 22 deletions

View File

@ -1,7 +1,7 @@
## Audio output from a speaker ## Audio output from a speaker
Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any keyboard that allows access to the C6 port, you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes. Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any keyboard that allows access to the C6 or B5 port (`#define C6_AUDIO` and `#define B5_AUDIO`), you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
The audio code lives in [quantum/audio/audio.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/audio.h) and in the other files in the audio directory. It's enabled by default on the Planck [stock keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/default/keymap.c). Here are the important bits: The audio code lives in [quantum/audio/audio.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/audio.h) and in the other files in the audio directory. It's enabled by default on the Planck [stock keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/default/keymap.c). Here are the important bits:

View File

@ -49,6 +49,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_PIN B7 #define BACKLIGHT_PIN B7
#define BACKLIGHT_BREATHING #define BACKLIGHT_BREATHING
#define C6_AUDIO
/* COL2ROW or ROW2COL */ /* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW

View File

@ -37,6 +37,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define UNUSED_PINS #define UNUSED_PINS
#define AUDIO_VOICES #define AUDIO_VOICES
#define C6_AUDIO
#define BACKLIGHT_PIN B7 #define BACKLIGHT_PIN B7

View File

@ -38,6 +38,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define UNUSED_PINS #define UNUSED_PINS
#define AUDIO_VOICES #define AUDIO_VOICES
#define C6_AUDIO
#define BACKLIGHT_PIN B7 #define BACKLIGHT_PIN B7

View File

@ -33,17 +33,41 @@
// TIMSK3 - Timer/Counter #3 Interrupt Mask Register // TIMSK3 - Timer/Counter #3 Interrupt Mask Register
// Turn on/off 3A interputs, stopping/enabling the ISR calls // Turn on/off 3A interputs, stopping/enabling the ISR calls
#define ENABLE_AUDIO_COUNTER_3_ISR TIMSK3 |= _BV(OCIE3A) #ifdef C6_AUDIO
#define DISABLE_AUDIO_COUNTER_3_ISR TIMSK3 &= ~_BV(OCIE3A) #define ENABLE_AUDIO_COUNTER_3_ISR TIMSK3 |= _BV(OCIE3A)
#define DISABLE_AUDIO_COUNTER_3_ISR TIMSK3 &= ~_BV(OCIE3A)
#endif
#ifdef B5_AUDIO
#define ENABLE_AUDIO_COUNTER_1_ISR TIMSK1 |= _BV(OCIE1A)
#define DISABLE_AUDIO_COUNTER_1_ISR TIMSK1 &= ~_BV(OCIE1A)
#endif
// TCCR3A: Timer/Counter #3 Control Register // TCCR3A: Timer/Counter #3 Control Register
// Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6 // Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6
#define ENABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A |= _BV(COM3A1);
#define DISABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A &= ~(_BV(COM3A1) | _BV(COM3A0)); #ifdef C6_AUDIO
#define ENABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A |= _BV(COM3A1);
#define DISABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A &= ~(_BV(COM3A1) | _BV(COM3A0));
#endif
#ifdef B5_AUDIO
#define ENABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A |= _BV(COM1A1);
#define DISABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A &= ~(_BV(COM1A1) | _BV(COM1A0));
#endif
// Fast PWM Mode Controls // Fast PWM Mode Controls
#define TIMER_3_PERIOD ICR3
#define TIMER_3_DUTY_CYCLE OCR3A #ifdef C6_AUDIO
#define TIMER_3_PERIOD ICR3
#define TIMER_3_DUTY_CYCLE OCR3A
#endif
#ifdef B5_AUDIO
#define TIMER_1_PERIOD ICR1
#define TIMER_1_DUTY_CYCLE OCR1A
#endif
// ----------------------------------------------------------------------------- // -----------------------------------------------------------------------------
@ -51,6 +75,7 @@
int voices = 0; int voices = 0;
int voice_place = 0; int voice_place = 0;
float frequency = 0; float frequency = 0;
float frequency_alt = 0;
int volume = 0; int volume = 0;
long position = 0; long position = 0;
@ -105,16 +130,43 @@ void audio_init()
audio_config.raw = eeconfig_read_audio(); audio_config.raw = eeconfig_read_audio();
// Set port PC6 (OC3A and /OC4A) as output // Set port PC6 (OC3A and /OC4A) as output
DDRC |= _BV(PORTC6);
DISABLE_AUDIO_COUNTER_3_ISR; #ifdef C6_AUDIO
DDRC |= _BV(PORTC6);
#else
DDRC |= _BV(PORTC6);
PORTC &= ~_BV(PORTC6);
#endif
#ifdef B5_AUDIO
DDRB |= _BV(PORTB5);
#else
DDRB |= _BV(PORTB5);
PORTB &= ~_BV(PORTB5);
#endif
#ifdef C6_AUDIO
DISABLE_AUDIO_COUNTER_3_ISR;
#endif
#ifdef B5_AUDIO
DISABLE_AUDIO_COUNTER_1_ISR;
#endif
// TCCR3A / TCCR3B: Timer/Counter #3 Control Registers // TCCR3A / TCCR3B: Timer/Counter #3 Control Registers
// Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6 // Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6
// Waveform Generation Mode (WGM3n) = 0b1110 = Fast PWM Mode 14 (Period = ICR3, Duty Cycle = OCR3A) // Waveform Generation Mode (WGM3n) = 0b1110 = Fast PWM Mode 14 (Period = ICR3, Duty Cycle = OCR3A)
// Clock Select (CS3n) = 0b010 = Clock / 8 // Clock Select (CS3n) = 0b010 = Clock / 8
TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30);
TCCR3B = (1 << WGM33) | (1 << WGM32) | (0 << CS32) | (1 << CS31) | (0 << CS30); #ifdef C6_AUDIO
TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30);
TCCR3B = (1 << WGM33) | (1 << WGM32) | (0 << CS32) | (1 << CS31) | (0 << CS30);
#endif
#ifdef B5_AUDIO
TCCR1A = (0 << COM1A1) | (0 << COM1A0) | (1 << WGM11) | (0 << WGM10);
TCCR1B = (1 << WGM13) | (1 << WGM12) | (0 << CS12) | (1 << CS11) | (0 << CS10);
#endif
audio_initialized = true; audio_initialized = true;
} }
@ -128,12 +180,21 @@ void stop_all_notes()
} }
voices = 0; voices = 0;
DISABLE_AUDIO_COUNTER_3_ISR;
DISABLE_AUDIO_COUNTER_3_OUTPUT; #ifdef C6_AUDIO
DISABLE_AUDIO_COUNTER_3_ISR;
DISABLE_AUDIO_COUNTER_3_OUTPUT;
#endif
#ifdef B5_AUDIO
DISABLE_AUDIO_COUNTER_1_ISR;
DISABLE_AUDIO_COUNTER_1_OUTPUT;
#endif
playing_notes = false; playing_notes = false;
playing_note = false; playing_note = false;
frequency = 0; frequency = 0;
frequency_alt = 0;
volume = 0; volume = 0;
for (uint8_t i = 0; i < 8; i++) for (uint8_t i = 0; i < 8; i++)
@ -171,9 +232,16 @@ void stop_note(float freq)
voice_place = 0; voice_place = 0;
} }
if (voices == 0) { if (voices == 0) {
DISABLE_AUDIO_COUNTER_3_ISR; #ifdef C6_AUDIO
DISABLE_AUDIO_COUNTER_3_OUTPUT; DISABLE_AUDIO_COUNTER_3_ISR;
DISABLE_AUDIO_COUNTER_3_OUTPUT;
#endif
#ifdef B5_AUDIO
DISABLE_AUDIO_COUNTER_1_ISR;
DISABLE_AUDIO_COUNTER_1_OUTPUT;
#endif
frequency = 0; frequency = 0;
frequency_alt = 0;
volume = 0; volume = 0;
playing_note = false; playing_note = false;
} }
@ -200,12 +268,56 @@ float vibrato(float average_freq) {
#endif #endif
#ifdef C6_AUDIO
ISR(TIMER3_COMPA_vect) ISR(TIMER3_COMPA_vect)
{ {
float freq; float freq;
if (playing_note) { if (playing_note) {
if (voices > 0) { if (voices > 0) {
#ifdef B5_AUDIO
float freq_alt = 0;
if (voices > 1) {
if (polyphony_rate == 0) {
if (glissando) {
if (frequency_alt != 0 && frequency_alt < frequencies[voices - 2] && frequency_alt < frequencies[voices - 2] * pow(2, -440/frequencies[voices - 2]/12/2)) {
frequency_alt = frequency_alt * pow(2, 440/frequency_alt/12/2);
} else if (frequency_alt != 0 && frequency_alt > frequencies[voices - 2] && frequency_alt > frequencies[voices - 2] * pow(2, 440/frequencies[voices - 2]/12/2)) {
frequency_alt = frequency_alt * pow(2, -440/frequency_alt/12/2);
} else {
frequency_alt = frequencies[voices - 2];
}
} else {
frequency_alt = frequencies[voices - 2];
}
#ifdef VIBRATO_ENABLE
if (vibrato_strength > 0) {
freq_alt = vibrato(frequency_alt);
} else {
freq_alt = frequency_alt;
}
#else
freq_alt = frequency_alt;
#endif
}
if (envelope_index < 65535) {
envelope_index++;
}
freq_alt = voice_envelope(freq_alt);
if (freq_alt < 30.517578125) {
freq_alt = 30.52;
}
TIMER_1_PERIOD = (uint16_t)(((float)F_CPU) / (freq_alt * CPU_PRESCALER));
TIMER_1_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (freq_alt * CPU_PRESCALER)) * note_timbre);
}
#endif
if (polyphony_rate > 0) { if (polyphony_rate > 0) {
if (voices > 1) { if (voices > 1) {
voice_place %= voices; voice_place %= voices;
@ -328,6 +440,140 @@ ISR(TIMER3_COMPA_vect)
playing_note = false; playing_note = false;
} }
} }
#endif
#ifdef B5_AUDIO
ISR(TIMER1_COMPA_vect)
{
#if defined(B5_AUDIO) && !defined(C6_AUDIO)
float freq = 0;
if (playing_note) {
if (voices > 0) {
if (polyphony_rate > 0) {
if (voices > 1) {
voice_place %= voices;
if (place++ > (frequencies[voice_place] / polyphony_rate / CPU_PRESCALER)) {
voice_place = (voice_place + 1) % voices;
place = 0.0;
}
}
#ifdef VIBRATO_ENABLE
if (vibrato_strength > 0) {
freq = vibrato(frequencies[voice_place]);
} else {
freq = frequencies[voice_place];
}
#else
freq = frequencies[voice_place];
#endif
} else {
if (glissando) {
if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440/frequencies[voices - 1]/12/2)) {
frequency = frequency * pow(2, 440/frequency/12/2);
} else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440/frequencies[voices - 1]/12/2)) {
frequency = frequency * pow(2, -440/frequency/12/2);
} else {
frequency = frequencies[voices - 1];
}
} else {
frequency = frequencies[voices - 1];
}
#ifdef VIBRATO_ENABLE
if (vibrato_strength > 0) {
freq = vibrato(frequency);
} else {
freq = frequency;
}
#else
freq = frequency;
#endif
}
if (envelope_index < 65535) {
envelope_index++;
}
freq = voice_envelope(freq);
if (freq < 30.517578125) {
freq = 30.52;
}
TIMER_1_PERIOD = (uint16_t)(((float)F_CPU) / (freq * CPU_PRESCALER));
TIMER_1_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre);
}
}
if (playing_notes) {
if (note_frequency > 0) {
#ifdef VIBRATO_ENABLE
if (vibrato_strength > 0) {
freq = vibrato(note_frequency);
} else {
freq = note_frequency;
}
#else
freq = note_frequency;
#endif
if (envelope_index < 65535) {
envelope_index++;
}
freq = voice_envelope(freq);
TIMER_1_PERIOD = (uint16_t)(((float)F_CPU) / (freq * CPU_PRESCALER));
TIMER_1_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre);
} else {
TIMER_1_PERIOD = 0;
TIMER_1_DUTY_CYCLE = 0;
}
note_position++;
bool end_of_note = false;
if (TIMER_1_PERIOD > 0) {
end_of_note = (note_position >= (note_length / TIMER_1_PERIOD * 0xFFFF));
} else {
end_of_note = (note_position >= (note_length * 0x7FF));
}
if (end_of_note) {
current_note++;
if (current_note >= notes_count) {
if (notes_repeat) {
current_note = 0;
} else {
DISABLE_AUDIO_COUNTER_1_ISR;
DISABLE_AUDIO_COUNTER_1_OUTPUT;
playing_notes = false;
return;
}
}
if (!note_resting && (notes_rest > 0)) {
note_resting = true;
note_frequency = 0;
note_length = notes_rest;
current_note--;
} else {
note_resting = false;
envelope_index = 0;
note_frequency = (*notes_pointer)[current_note][0];
note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100);
}
note_position = 0;
}
}
if (!audio_config.enable) {
playing_notes = false;
playing_note = false;
}
#endif
}
#endif
void play_note(float freq, int vol) { void play_note(float freq, int vol) {
@ -338,7 +584,12 @@ void play_note(float freq, int vol) {
} }
if (audio_config.enable && voices < 8) { if (audio_config.enable && voices < 8) {
DISABLE_AUDIO_COUNTER_3_ISR; #ifdef C6_AUDIO
DISABLE_AUDIO_COUNTER_3_ISR;
#endif
#ifdef B5_AUDIO
DISABLE_AUDIO_COUNTER_1_ISR;
#endif
// Cancel notes if notes are playing // Cancel notes if notes are playing
if (playing_notes) if (playing_notes)
@ -354,8 +605,21 @@ void play_note(float freq, int vol) {
voices++; voices++;
} }
ENABLE_AUDIO_COUNTER_3_ISR; #ifdef C6_AUDIO
ENABLE_AUDIO_COUNTER_3_OUTPUT; ENABLE_AUDIO_COUNTER_3_ISR;
ENABLE_AUDIO_COUNTER_3_OUTPUT;
#endif
#ifdef B5_AUDIO
#ifdef C6_AUDIO
if (voices > 1) {
ENABLE_AUDIO_COUNTER_1_ISR;
ENABLE_AUDIO_COUNTER_1_OUTPUT;
}
#else
ENABLE_AUDIO_COUNTER_1_ISR;
ENABLE_AUDIO_COUNTER_1_OUTPUT;
#endif
#endif
} }
} }
@ -369,7 +633,12 @@ void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat, float n_rest)
if (audio_config.enable) { if (audio_config.enable) {
DISABLE_AUDIO_COUNTER_3_ISR; #ifdef C6_AUDIO
DISABLE_AUDIO_COUNTER_3_ISR;
#endif
#ifdef B5_AUDIO
DISABLE_AUDIO_COUNTER_1_ISR;
#endif
// Cancel note if a note is playing // Cancel note if a note is playing
if (playing_note) if (playing_note)
@ -390,8 +659,16 @@ void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat, float n_rest)
note_position = 0; note_position = 0;
ENABLE_AUDIO_COUNTER_3_ISR; #ifdef C6_AUDIO
ENABLE_AUDIO_COUNTER_3_OUTPUT; ENABLE_AUDIO_COUNTER_3_ISR;
ENABLE_AUDIO_COUNTER_3_OUTPUT;
#endif
#ifdef B5_AUDIO
#ifndef C6_AUDIO
ENABLE_AUDIO_COUNTER_1_ISR;
ENABLE_AUDIO_COUNTER_1_OUTPUT;
#endif
#endif
} }
} }

View File

@ -44,7 +44,7 @@ float voice_envelope(float frequency) {
switch (voice) { switch (voice) {
case default_voice: case default_voice:
glissando = true; glissando = false;
note_timbre = TIMBRE_50; note_timbre = TIMBRE_50;
polyphony_rate = 0; polyphony_rate = 0;
break; break;