Add Quefrency Keyboard (#3376)
* Fork Fourier keyboard to Quefrency * Set Quefrency pinouts and initial keymap * Set configurator layoutdaktil_thumb_popravljen
Danny
Drashna Jaelre
parent
f30d6dd785
commit
9a1613dd1a
|
|
@ -0,0 +1,28 @@
|
||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
Copyright 2015 Jack Humbert
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_H
|
||||||
|
#define CONFIG_H
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
#ifdef SUBPROJECT_rev1
|
||||||
|
#include "rev1/config.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,162 @@
|
||||||
|
#include <util/twi.h>
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <avr/interrupt.h>
|
||||||
|
#include <util/twi.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include "i2c.h"
|
||||||
|
|
||||||
|
#ifdef USE_I2C
|
||||||
|
|
||||||
|
// Limits the amount of we wait for any one i2c transaction.
|
||||||
|
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
|
||||||
|
// 9 bits, a single transaction will take around 90μs to complete.
|
||||||
|
//
|
||||||
|
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
|
||||||
|
// poll loop takes at least 8 clock cycles to execute
|
||||||
|
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
|
||||||
|
|
||||||
|
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
|
||||||
|
|
||||||
|
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
||||||
|
|
||||||
|
static volatile uint8_t slave_buffer_pos;
|
||||||
|
static volatile bool slave_has_register_set = false;
|
||||||
|
|
||||||
|
// Wait for an i2c operation to finish
|
||||||
|
inline static
|
||||||
|
void i2c_delay(void) {
|
||||||
|
uint16_t lim = 0;
|
||||||
|
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
|
||||||
|
lim++;
|
||||||
|
|
||||||
|
// easier way, but will wait slightly longer
|
||||||
|
// _delay_us(100);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Setup twi to run at 100kHz
|
||||||
|
void i2c_master_init(void) {
|
||||||
|
// no prescaler
|
||||||
|
TWSR = 0;
|
||||||
|
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
|
||||||
|
// Check datasheets for more info.
|
||||||
|
TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Start a transaction with the given i2c slave address. The direction of the
|
||||||
|
// transfer is set with I2C_READ and I2C_WRITE.
|
||||||
|
// returns: 0 => success
|
||||||
|
// 1 => error
|
||||||
|
uint8_t i2c_master_start(uint8_t address) {
|
||||||
|
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
|
||||||
|
|
||||||
|
i2c_delay();
|
||||||
|
|
||||||
|
// check that we started successfully
|
||||||
|
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
|
||||||
|
return 1;
|
||||||
|
|
||||||
|
TWDR = address;
|
||||||
|
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||||
|
|
||||||
|
i2c_delay();
|
||||||
|
|
||||||
|
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
|
||||||
|
return 1; // slave did not acknowledge
|
||||||
|
else
|
||||||
|
return 0; // success
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// Finish the i2c transaction.
|
||||||
|
void i2c_master_stop(void) {
|
||||||
|
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
||||||
|
|
||||||
|
uint16_t lim = 0;
|
||||||
|
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
|
||||||
|
lim++;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Write one byte to the i2c slave.
|
||||||
|
// returns 0 => slave ACK
|
||||||
|
// 1 => slave NACK
|
||||||
|
uint8_t i2c_master_write(uint8_t data) {
|
||||||
|
TWDR = data;
|
||||||
|
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||||
|
|
||||||
|
i2c_delay();
|
||||||
|
|
||||||
|
// check if the slave acknowledged us
|
||||||
|
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
|
||||||
|
// if ack=0 the acknowledge bit is not set.
|
||||||
|
// returns: byte read from i2c device
|
||||||
|
uint8_t i2c_master_read(int ack) {
|
||||||
|
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
|
||||||
|
|
||||||
|
i2c_delay();
|
||||||
|
return TWDR;
|
||||||
|
}
|
||||||
|
|
||||||
|
void i2c_reset_state(void) {
|
||||||
|
TWCR = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
void i2c_slave_init(uint8_t address) {
|
||||||
|
TWAR = address << 0; // slave i2c address
|
||||||
|
// TWEN - twi enable
|
||||||
|
// TWEA - enable address acknowledgement
|
||||||
|
// TWINT - twi interrupt flag
|
||||||
|
// TWIE - enable the twi interrupt
|
||||||
|
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
|
||||||
|
}
|
||||||
|
|
||||||
|
ISR(TWI_vect);
|
||||||
|
|
||||||
|
ISR(TWI_vect) {
|
||||||
|
uint8_t ack = 1;
|
||||||
|
switch(TW_STATUS) {
|
||||||
|
case TW_SR_SLA_ACK:
|
||||||
|
// this device has been addressed as a slave receiver
|
||||||
|
slave_has_register_set = false;
|
||||||
|
break;
|
||||||
|
|
||||||
|
case TW_SR_DATA_ACK:
|
||||||
|
// this device has received data as a slave receiver
|
||||||
|
// The first byte that we receive in this transaction sets the location
|
||||||
|
// of the read/write location of the slaves memory that it exposes over
|
||||||
|
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
|
||||||
|
// slave_buffer_pos after each write.
|
||||||
|
if(!slave_has_register_set) {
|
||||||
|
slave_buffer_pos = TWDR;
|
||||||
|
// don't acknowledge the master if this memory loctaion is out of bounds
|
||||||
|
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
|
||||||
|
ack = 0;
|
||||||
|
slave_buffer_pos = 0;
|
||||||
|
}
|
||||||
|
slave_has_register_set = true;
|
||||||
|
} else {
|
||||||
|
i2c_slave_buffer[slave_buffer_pos] = TWDR;
|
||||||
|
BUFFER_POS_INC();
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
|
||||||
|
case TW_ST_SLA_ACK:
|
||||||
|
case TW_ST_DATA_ACK:
|
||||||
|
// master has addressed this device as a slave transmitter and is
|
||||||
|
// requesting data.
|
||||||
|
TWDR = i2c_slave_buffer[slave_buffer_pos];
|
||||||
|
BUFFER_POS_INC();
|
||||||
|
break;
|
||||||
|
|
||||||
|
case TW_BUS_ERROR: // something went wrong, reset twi state
|
||||||
|
TWCR = 0;
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
// Reset everything, so we are ready for the next TWI interrupt
|
||||||
|
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,49 @@
|
||||||
|
#ifndef I2C_H
|
||||||
|
#define I2C_H
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
#ifndef F_CPU
|
||||||
|
#define F_CPU 16000000UL
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define I2C_READ 1
|
||||||
|
#define I2C_WRITE 0
|
||||||
|
|
||||||
|
#define I2C_ACK 1
|
||||||
|
#define I2C_NACK 0
|
||||||
|
|
||||||
|
#define SLAVE_BUFFER_SIZE 0x10
|
||||||
|
|
||||||
|
// i2c SCL clock frequency
|
||||||
|
#define SCL_CLOCK 400000L
|
||||||
|
|
||||||
|
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
||||||
|
|
||||||
|
void i2c_master_init(void);
|
||||||
|
uint8_t i2c_master_start(uint8_t address);
|
||||||
|
void i2c_master_stop(void);
|
||||||
|
uint8_t i2c_master_write(uint8_t data);
|
||||||
|
uint8_t i2c_master_read(int);
|
||||||
|
void i2c_reset_state(void);
|
||||||
|
void i2c_slave_init(uint8_t address);
|
||||||
|
|
||||||
|
|
||||||
|
static inline unsigned char i2c_start_read(unsigned char addr) {
|
||||||
|
return i2c_master_start((addr << 1) | I2C_READ);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline unsigned char i2c_start_write(unsigned char addr) {
|
||||||
|
return i2c_master_start((addr << 1) | I2C_WRITE);
|
||||||
|
}
|
||||||
|
|
||||||
|
// from SSD1306 scrips
|
||||||
|
extern unsigned char i2c_rep_start(unsigned char addr);
|
||||||
|
extern void i2c_start_wait(unsigned char addr);
|
||||||
|
extern unsigned char i2c_readAck(void);
|
||||||
|
extern unsigned char i2c_readNak(void);
|
||||||
|
extern unsigned char i2c_read(unsigned char ack);
|
||||||
|
|
||||||
|
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,86 @@
|
||||||
|
{
|
||||||
|
"keyboard_name": "Quefrency",
|
||||||
|
"url": "https://keeb.io",
|
||||||
|
"maintainer": "nooges",
|
||||||
|
"width": 16,
|
||||||
|
"height": 5,
|
||||||
|
"layouts": {
|
||||||
|
"LAYOUT": {
|
||||||
|
"layout": [
|
||||||
|
{"label":"Esc", "x":0, "y":0},
|
||||||
|
{"label":"1", "x":1, "y":0},
|
||||||
|
{"label":"2", "x":2, "y":0},
|
||||||
|
{"label":"3", "x":3, "y":0},
|
||||||
|
{"label":"4", "x":4, "y":0},
|
||||||
|
{"label":"5", "x":5, "y":0},
|
||||||
|
{"label":"6", "x":6, "y":0},
|
||||||
|
|
||||||
|
{"label":"7", "x":8, "y":0},
|
||||||
|
{"label":"8", "x":9, "y":0},
|
||||||
|
{"label":"9", "x":10, "y":0},
|
||||||
|
{"label":"0", "x":11, "y":0},
|
||||||
|
{"label":"-", "x":12, "y":0},
|
||||||
|
{"label":"=", "x":13, "y":0},
|
||||||
|
{"label":"Backspace", "x":14, "y":0, "w":2},
|
||||||
|
|
||||||
|
{"label":"Tab", "x":0, "y":1, "w":1.5},
|
||||||
|
{"label":"Q", "x":1.5, "y":1},
|
||||||
|
{"label":"W", "x":2.5, "y":1},
|
||||||
|
{"label":"E", "x":3.5, "y":1},
|
||||||
|
{"label":"R", "x":4.5, "y":1},
|
||||||
|
{"label":"T", "x":5.5, "y":1},
|
||||||
|
|
||||||
|
{"label":"Y", "x":7.5, "y":1},
|
||||||
|
{"label":"U", "x":8.5, "y":1},
|
||||||
|
{"label":"I", "x":9.5, "y":1},
|
||||||
|
{"label":"O", "x":10.5, "y":1},
|
||||||
|
{"label":"P", "x":11.5, "y":1},
|
||||||
|
{"label":"[", "x":12.5, "y":1},
|
||||||
|
{"label":"]", "x":13.5, "y":1},
|
||||||
|
{"label":"Backslash", "x":14.5, "y":1, "w":1.5},
|
||||||
|
|
||||||
|
{"label":"Caps", "x":0, "y":2, "w":1.75},
|
||||||
|
{"label":"A", "x":1.75, "y":2},
|
||||||
|
{"label":"S", "x":2.75, "y":2},
|
||||||
|
{"label":"D", "x":3.75, "y":2},
|
||||||
|
{"label":"F", "x":4.75, "y":2},
|
||||||
|
{"label":"G", "x":5.75, "y":2},
|
||||||
|
|
||||||
|
{"label":"H", "x":7.75, "y":2},
|
||||||
|
{"label":"J", "x":8.75, "y":2},
|
||||||
|
{"label":"K", "x":9.75, "y":2},
|
||||||
|
{"label":"L", "x":10.75, "y":2},
|
||||||
|
{"label":";", "x":11.75, "y":2},
|
||||||
|
{"label":"'", "x":12.75, "y":2},
|
||||||
|
{"label":"Enter", "x":13.75, "y":2, "w":2.25},
|
||||||
|
|
||||||
|
{"label":"Shift", "x":0, "y":3, "w":2.25},
|
||||||
|
{"label":"Z", "x":2.25, "y":3},
|
||||||
|
{"label":"X", "x":3.25, "y":3},
|
||||||
|
{"label":"C", "x":4.25, "y":3},
|
||||||
|
{"label":"V", "x":5.25, "y":3},
|
||||||
|
{"label":"B", "x":6.25, "y":3},
|
||||||
|
|
||||||
|
{"label":"N", "x":8.25, "y":3},
|
||||||
|
{"label":"M", "x":9.25, "y":3},
|
||||||
|
{"label":"<", "x":10.25, "y":3},
|
||||||
|
{"label":">", "x":11.25, "y":3},
|
||||||
|
{"label":"?", "x":12.25, "y":3},
|
||||||
|
{"label":"Shift", "x":13.25, "y":3, "w":1.75},
|
||||||
|
{"label":"Up", "x":15, "y":3},
|
||||||
|
|
||||||
|
{"label":"Ctrl", "x":0, "y":4, "w":1.25},
|
||||||
|
{"label":"Alt", "x":1.25, "y":4, "w":1.25},
|
||||||
|
{"label":"Gui", "x":2.5, "y":4, "w":1.25},
|
||||||
|
{"label":"Fn1", "x":3.75, "y":4, "w":1.25},
|
||||||
|
{"label":"Space", "x":5, "y":4, "w":2.25},
|
||||||
|
|
||||||
|
{"label":"Backspace", "x":8.25, "y":4, "w":2.75},
|
||||||
|
{"label":"Gui", "x":11, "y":4, "w":1.25},
|
||||||
|
{"label":"Left", "x":12.25, "y":4, "w":1.25},
|
||||||
|
{"label":"Down", "x":13.5, "y":4, "w":1.25},
|
||||||
|
{"label":"Right", "x":14.75, "y":4, "w":1.25}
|
||||||
|
]
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,31 @@
|
||||||
|
/*
|
||||||
|
This is the c configuration file for the keymap
|
||||||
|
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
Copyright 2015 Jack Humbert
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef CONFIG_USER_H
|
||||||
|
#define CONFIG_USER_H
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* Use I2C or Serial, not both */
|
||||||
|
|
||||||
|
#define USE_SERIAL
|
||||||
|
// #define USE_I2C
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,35 @@
|
||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
extern keymap_config_t keymap_config;
|
||||||
|
|
||||||
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||||
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||||
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||||
|
// entirely and just use numbers.
|
||||||
|
#define _BASE 0
|
||||||
|
#define _FN1 1
|
||||||
|
|
||||||
|
enum custom_keycodes {
|
||||||
|
QWERTY = SAFE_RANGE,
|
||||||
|
};
|
||||||
|
|
||||||
|
#define _______ KC_TRNS
|
||||||
|
#define XXXXXXX KC_NO
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[_BASE] = LAYOUT(
|
||||||
|
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, \
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
|
||||||
|
KC_LCTL, KC_LALT, KC_LGUI, MO(_FN1),KC_SPC, KC_BSPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||||
|
),
|
||||||
|
|
||||||
|
[_FN1] = LAYOUT(
|
||||||
|
KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_BSPC, \
|
||||||
|
RGB_TOG, RGB_MOD, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||||
|
_______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,\
|
||||||
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||||
|
KC_TILD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||||
|
)
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,467 @@
|
||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* scan matrix
|
||||||
|
*/
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include "wait.h"
|
||||||
|
#include "print.h"
|
||||||
|
#include "debug.h"
|
||||||
|
#include "util.h"
|
||||||
|
#include "matrix.h"
|
||||||
|
#include "split_util.h"
|
||||||
|
#include "pro_micro.h"
|
||||||
|
#include "config.h"
|
||||||
|
#include "timer.h"
|
||||||
|
#include "backlight.h"
|
||||||
|
|
||||||
|
#ifdef USE_I2C
|
||||||
|
# include "i2c.h"
|
||||||
|
#else // USE_SERIAL
|
||||||
|
# include "serial.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef DEBOUNCING_DELAY
|
||||||
|
# define DEBOUNCING_DELAY 5
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if (DEBOUNCING_DELAY > 0)
|
||||||
|
static uint16_t debouncing_time;
|
||||||
|
static bool debouncing = false;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if (MATRIX_COLS <= 8)
|
||||||
|
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||||
|
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||||
|
# define matrix_bitpop(i) bitpop(matrix[i])
|
||||||
|
# define ROW_SHIFTER ((uint8_t)1)
|
||||||
|
#else
|
||||||
|
# error "Currently only supports 8 COLS"
|
||||||
|
#endif
|
||||||
|
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||||
|
|
||||||
|
#define ERROR_DISCONNECT_COUNT 5
|
||||||
|
|
||||||
|
#define SERIAL_LED_ADDR 0x00
|
||||||
|
|
||||||
|
#define ROWS_PER_HAND (MATRIX_ROWS/2)
|
||||||
|
|
||||||
|
static uint8_t error_count = 0;
|
||||||
|
|
||||||
|
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
|
||||||
|
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
|
||||||
|
|
||||||
|
/* matrix state(1:on, 0:off) */
|
||||||
|
static matrix_row_t matrix[MATRIX_ROWS];
|
||||||
|
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||||
|
|
||||||
|
#if (DIODE_DIRECTION == COL2ROW)
|
||||||
|
static void init_cols(void);
|
||||||
|
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
|
||||||
|
static void unselect_rows(void);
|
||||||
|
static void select_row(uint8_t row);
|
||||||
|
static void unselect_row(uint8_t row);
|
||||||
|
#elif (DIODE_DIRECTION == ROW2COL)
|
||||||
|
static void init_rows(void);
|
||||||
|
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
|
||||||
|
static void unselect_cols(void);
|
||||||
|
static void unselect_col(uint8_t col);
|
||||||
|
static void select_col(uint8_t col);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
matrix_scan_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_init_user(void) {
|
||||||
|
}
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_scan_user(void) {
|
||||||
|
}
|
||||||
|
|
||||||
|
inline
|
||||||
|
uint8_t matrix_rows(void)
|
||||||
|
{
|
||||||
|
return MATRIX_ROWS;
|
||||||
|
}
|
||||||
|
|
||||||
|
inline
|
||||||
|
uint8_t matrix_cols(void)
|
||||||
|
{
|
||||||
|
return MATRIX_COLS;
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init(void)
|
||||||
|
{
|
||||||
|
debug_enable = true;
|
||||||
|
debug_matrix = true;
|
||||||
|
debug_mouse = true;
|
||||||
|
// initialize row and col
|
||||||
|
unselect_rows();
|
||||||
|
init_cols();
|
||||||
|
|
||||||
|
TX_RX_LED_INIT;
|
||||||
|
|
||||||
|
// initialize matrix state: all keys off
|
||||||
|
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
||||||
|
matrix[i] = 0;
|
||||||
|
matrix_debouncing[i] = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
matrix_init_quantum();
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t _matrix_scan(void)
|
||||||
|
{
|
||||||
|
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
|
||||||
|
#if (DIODE_DIRECTION == COL2ROW)
|
||||||
|
// Set row, read cols
|
||||||
|
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
|
||||||
|
# if (DEBOUNCING_DELAY > 0)
|
||||||
|
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
|
||||||
|
|
||||||
|
if (matrix_changed) {
|
||||||
|
debouncing = true;
|
||||||
|
debouncing_time = timer_read();
|
||||||
|
}
|
||||||
|
|
||||||
|
# else
|
||||||
|
read_cols_on_row(matrix+offset, current_row);
|
||||||
|
# endif
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
#elif (DIODE_DIRECTION == ROW2COL)
|
||||||
|
// Set col, read rows
|
||||||
|
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
|
||||||
|
# if (DEBOUNCING_DELAY > 0)
|
||||||
|
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
|
||||||
|
if (matrix_changed) {
|
||||||
|
debouncing = true;
|
||||||
|
debouncing_time = timer_read();
|
||||||
|
}
|
||||||
|
# else
|
||||||
|
read_rows_on_col(matrix+offset, current_col);
|
||||||
|
# endif
|
||||||
|
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
# if (DEBOUNCING_DELAY > 0)
|
||||||
|
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
|
||||||
|
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
|
||||||
|
matrix[i+offset] = matrix_debouncing[i+offset];
|
||||||
|
}
|
||||||
|
debouncing = false;
|
||||||
|
}
|
||||||
|
# endif
|
||||||
|
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef USE_I2C
|
||||||
|
|
||||||
|
// Get rows from other half over i2c
|
||||||
|
int i2c_transaction(void) {
|
||||||
|
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
||||||
|
|
||||||
|
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
|
||||||
|
if (err) goto i2c_error;
|
||||||
|
|
||||||
|
// start of matrix stored at 0x00
|
||||||
|
err = i2c_master_write(0x00);
|
||||||
|
if (err) goto i2c_error;
|
||||||
|
|
||||||
|
// Start read
|
||||||
|
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
|
||||||
|
if (err) goto i2c_error;
|
||||||
|
|
||||||
|
if (!err) {
|
||||||
|
int i;
|
||||||
|
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
|
||||||
|
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
|
||||||
|
}
|
||||||
|
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
|
||||||
|
i2c_master_stop();
|
||||||
|
} else {
|
||||||
|
i2c_error: // the cable is disconnceted, or something else went wrong
|
||||||
|
i2c_reset_state();
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#else // USE_SERIAL
|
||||||
|
|
||||||
|
int serial_transaction(void) {
|
||||||
|
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
||||||
|
|
||||||
|
if (serial_update_buffers()) {
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||||
|
matrix[slaveOffset+i] = serial_slave_buffer[i];
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef BACKLIGHT_ENABLE
|
||||||
|
// Write backlight level for slave to read
|
||||||
|
serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level();
|
||||||
|
#endif
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
uint8_t matrix_scan(void)
|
||||||
|
{
|
||||||
|
uint8_t ret = _matrix_scan();
|
||||||
|
|
||||||
|
#ifdef USE_I2C
|
||||||
|
if( i2c_transaction() ) {
|
||||||
|
#else // USE_SERIAL
|
||||||
|
if( serial_transaction() ) {
|
||||||
|
#endif
|
||||||
|
// turn on the indicator led when halves are disconnected
|
||||||
|
TXLED1;
|
||||||
|
|
||||||
|
error_count++;
|
||||||
|
|
||||||
|
if (error_count > ERROR_DISCONNECT_COUNT) {
|
||||||
|
// reset other half if disconnected
|
||||||
|
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
||||||
|
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||||
|
matrix[slaveOffset+i] = 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
// turn off the indicator led on no error
|
||||||
|
TXLED0;
|
||||||
|
error_count = 0;
|
||||||
|
}
|
||||||
|
matrix_scan_quantum();
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_slave_scan(void) {
|
||||||
|
_matrix_scan();
|
||||||
|
|
||||||
|
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
|
||||||
|
|
||||||
|
#ifdef USE_I2C
|
||||||
|
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||||
|
i2c_slave_buffer[i] = matrix[offset+i];
|
||||||
|
}
|
||||||
|
#else // USE_SERIAL
|
||||||
|
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||||
|
serial_slave_buffer[i] = matrix[offset+i];
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef BACKLIGHT_ENABLE
|
||||||
|
// Read backlight level sent from master and update level on slave
|
||||||
|
backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
bool matrix_is_modified(void)
|
||||||
|
{
|
||||||
|
if (debouncing) return false;
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
|
||||||
|
inline
|
||||||
|
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||||
|
{
|
||||||
|
return (matrix[row] & ((matrix_row_t)1<<col));
|
||||||
|
}
|
||||||
|
|
||||||
|
inline
|
||||||
|
matrix_row_t matrix_get_row(uint8_t row)
|
||||||
|
{
|
||||||
|
return matrix[row];
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_print(void)
|
||||||
|
{
|
||||||
|
print("\nr/c 0123456789ABCDEF\n");
|
||||||
|
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||||
|
phex(row); print(": ");
|
||||||
|
pbin_reverse16(matrix_get_row(row));
|
||||||
|
print("\n");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t matrix_key_count(void)
|
||||||
|
{
|
||||||
|
uint8_t count = 0;
|
||||||
|
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||||
|
count += bitpop16(matrix[i]);
|
||||||
|
}
|
||||||
|
return count;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if (DIODE_DIRECTION == COL2ROW)
|
||||||
|
|
||||||
|
static void init_cols(void)
|
||||||
|
{
|
||||||
|
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
|
||||||
|
uint8_t pin = col_pins[x];
|
||||||
|
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||||
|
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
|
||||||
|
{
|
||||||
|
// Store last value of row prior to reading
|
||||||
|
matrix_row_t last_row_value = current_matrix[current_row];
|
||||||
|
|
||||||
|
// Clear data in matrix row
|
||||||
|
current_matrix[current_row] = 0;
|
||||||
|
|
||||||
|
// Select row and wait for row selecton to stabilize
|
||||||
|
select_row(current_row);
|
||||||
|
wait_us(30);
|
||||||
|
|
||||||
|
// For each col...
|
||||||
|
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
|
||||||
|
|
||||||
|
// Select the col pin to read (active low)
|
||||||
|
uint8_t pin = col_pins[col_index];
|
||||||
|
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
|
||||||
|
|
||||||
|
// Populate the matrix row with the state of the col pin
|
||||||
|
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Unselect row
|
||||||
|
unselect_row(current_row);
|
||||||
|
|
||||||
|
return (last_row_value != current_matrix[current_row]);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void select_row(uint8_t row)
|
||||||
|
{
|
||||||
|
uint8_t pin = row_pins[row];
|
||||||
|
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
|
||||||
|
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
|
||||||
|
}
|
||||||
|
|
||||||
|
static void unselect_row(uint8_t row)
|
||||||
|
{
|
||||||
|
uint8_t pin = row_pins[row];
|
||||||
|
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||||
|
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||||
|
}
|
||||||
|
|
||||||
|
static void unselect_rows(void)
|
||||||
|
{
|
||||||
|
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
|
||||||
|
uint8_t pin = row_pins[x];
|
||||||
|
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||||
|
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#elif (DIODE_DIRECTION == ROW2COL)
|
||||||
|
|
||||||
|
static void init_rows(void)
|
||||||
|
{
|
||||||
|
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
|
||||||
|
uint8_t pin = row_pins[x];
|
||||||
|
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||||
|
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
|
||||||
|
{
|
||||||
|
bool matrix_changed = false;
|
||||||
|
|
||||||
|
// Select col and wait for col selecton to stabilize
|
||||||
|
select_col(current_col);
|
||||||
|
wait_us(30);
|
||||||
|
|
||||||
|
// For each row...
|
||||||
|
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
|
||||||
|
{
|
||||||
|
|
||||||
|
// Store last value of row prior to reading
|
||||||
|
matrix_row_t last_row_value = current_matrix[row_index];
|
||||||
|
|
||||||
|
// Check row pin state
|
||||||
|
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
|
||||||
|
{
|
||||||
|
// Pin LO, set col bit
|
||||||
|
current_matrix[row_index] |= (ROW_SHIFTER << current_col);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
// Pin HI, clear col bit
|
||||||
|
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Determine if the matrix changed state
|
||||||
|
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
|
||||||
|
{
|
||||||
|
matrix_changed = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// Unselect col
|
||||||
|
unselect_col(current_col);
|
||||||
|
|
||||||
|
return matrix_changed;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void select_col(uint8_t col)
|
||||||
|
{
|
||||||
|
uint8_t pin = col_pins[col];
|
||||||
|
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
|
||||||
|
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
|
||||||
|
}
|
||||||
|
|
||||||
|
static void unselect_col(uint8_t col)
|
||||||
|
{
|
||||||
|
uint8_t pin = col_pins[col];
|
||||||
|
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||||
|
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||||
|
}
|
||||||
|
|
||||||
|
static void unselect_cols(void)
|
||||||
|
{
|
||||||
|
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
|
||||||
|
uint8_t pin = col_pins[x];
|
||||||
|
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||||
|
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1 @@
|
||||||
|
#include "quefrency.h"
|
||||||
|
|
@ -0,0 +1,23 @@
|
||||||
|
#ifndef QUEFRENCY_H
|
||||||
|
#define QUEFRENCY_H
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
#ifdef KEYBOARD_quefrency_rev1
|
||||||
|
#include "rev1.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Used to create a keymap using only KC_ prefixed keys
|
||||||
|
#define LAYOUT_kc( \
|
||||||
|
LA1, LA2, LA3, LA4, LA5, LA6, RA1, RA2, RA3, RA4, RA5, RA6, RA7, \
|
||||||
|
LB1, LB2, LB3, LB4, LB5, LB6, RB1, RB2, RB3, RB4, RB5, RB7, \
|
||||||
|
LC1, LC2, LC3, LC4, LC5, LC6, RC1, RC3, RC4, RC5, RC6, RC7, \
|
||||||
|
LD1, LD2, LD3, LD4, LD5, RD1, RD4, RD5, RD6, RD7 \
|
||||||
|
) \
|
||||||
|
LAYOUT( \
|
||||||
|
KC_##LA1, KC_##LA2, KC_##LA3, KC_##LA4, KC_##LA5, KC_##LA6, KC_##RA1, KC_##RA2, KC_##RA3, KC_##RA4, KC_##RA5, KC_##RA6, KC_##RA7, \
|
||||||
|
KC_##LB1, KC_##LB2, KC_##LB3, KC_##LB4, KC_##LB5, KC_##LB6, KC_##RB1, KC_##RB2, KC_##RB3, KC_##RB4, KC_##RB5, KC_##RB7, \
|
||||||
|
KC_##LC1, KC_##LC2, KC_##LC3, KC_##LC4, KC_##LC5, KC_##LC6, KC_##RC1, KC_##RC3, KC_##RC4, KC_##RC5, KC_##RC6, KC_##RC7, \
|
||||||
|
KC_##LD1, KC_##LD2, KC_##LD3, KC_##LD4, KC_##LD5, KC_##RD1, KC_##RD4, KC_##RD5, KC_##RD6, KC_##RD7 \
|
||||||
|
)
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,20 @@
|
||||||
|
Quefrency
|
||||||
|
=========
|
||||||
|
|
||||||
|
A split 60% staggered keyboard made and sold by Keebio. [More info at Keebio](https://keeb.io).
|
||||||
|
|
||||||
|
Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges)
|
||||||
|
Hardware Supported: Pro Micro
|
||||||
|
Hardware Availability: [Keebio](https://keeb.io/)
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make quefrency/rev1:default
|
||||||
|
|
||||||
|
Example of flashing this keyboard:
|
||||||
|
|
||||||
|
make quefrency/rev1:default:avrdude
|
||||||
|
|
||||||
|
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||||
|
|
||||||
|
A build guide for this keyboard can be found here: [Keebio Build Guides](https://docs.keeb.io)
|
||||||
|
|
@ -0,0 +1,84 @@
|
||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
Copyright 2015 Jack Humbert
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef REV1_CONFIG_H
|
||||||
|
#define REV1_CONFIG_H
|
||||||
|
|
||||||
|
#include "../config.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xCB10
|
||||||
|
#define PRODUCT_ID 0x1257
|
||||||
|
#define DEVICE_VER 0x0100
|
||||||
|
#define MANUFACTURER Keebio
|
||||||
|
#define PRODUCT Quefrency
|
||||||
|
#define DESCRIPTION Split 60 percent staggered keyboard
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
// Rows are doubled-up
|
||||||
|
#define MATRIX_ROWS 10
|
||||||
|
#define MATRIX_COLS 8
|
||||||
|
|
||||||
|
// wiring of each half
|
||||||
|
#define MATRIX_ROW_PINS { F4, D4, D7, E6, B4 }
|
||||||
|
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6, C6 }
|
||||||
|
|
||||||
|
/* define if matrix has ghost */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* ws2812 RGB LED */
|
||||||
|
#define RGB_DI_PIN D3
|
||||||
|
#define RGBLIGHT_TIMER
|
||||||
|
#define RGBLIGHT_ANIMATIONS
|
||||||
|
#define RGBLED_NUM 16 // Number of LEDs
|
||||||
|
#define ws2812_PORTREG PORTD
|
||||||
|
#define ws2812_DDRREG DDRD
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
// #define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
// #define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,7 @@
|
||||||
|
#include "quefrency.h"
|
||||||
|
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
matrix_init_user();
|
||||||
|
};
|
||||||
|
|
||||||
|
|
@ -0,0 +1,37 @@
|
||||||
|
#ifndef REV1_H
|
||||||
|
#define REV1_H
|
||||||
|
|
||||||
|
#include "../quefrency.h"
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef USE_I2C
|
||||||
|
#include <stddef.h>
|
||||||
|
#ifdef __AVR__
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include <avr/interrupt.h>
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define LAYOUT( \
|
||||||
|
LA1, LA2, LA3, LA4, LA5, LA6, LA7, RA1, RA2, RA3, RA4, RA5, RA6, RA7, RA8, \
|
||||||
|
LB1, LB2, LB3, LB4, LB5, LB6, RB1, RB2, RB3, RB4, RB5, RB6, RB7, RB8, \
|
||||||
|
LC1, LC2, LC3, LC4, LC5, LC6, RC1, RC2, RC3, RC4, RC5, RC6, RC8, \
|
||||||
|
LD1, LD3, LD4, LD5, LD6, LD7, RD1, RD2, RD3, RD4, RD6, RD7, RD8, \
|
||||||
|
LE1, LE2, LE3, LE5, LE7, RE1, RE4, RE5, RE6, RE7, RE8 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ LA1, LA2, LA3, LA4, LA5, LA6, LA7, KC_NO }, \
|
||||||
|
{ LB1, LB2, LB3, LB4, LB5, LB6, KC_NO, KC_NO }, \
|
||||||
|
{ LC1, LC2, LC3, LC4, LC5, LC6, KC_NO, KC_NO }, \
|
||||||
|
{ LD1, KC_NO, LD3, LD4, LD5, LD6, LD7, KC_NO }, \
|
||||||
|
{ LE1, LE2, LE3, KC_NO, LE5, KC_NO, LE7, KC_NO }, \
|
||||||
|
{ RA1, RA2, RA3, RA4, RA5, RA6, RA7, RA8 }, \
|
||||||
|
{ RB1, RB2, RB3, RB4, RB5, RB6, RB7, RB8 }, \
|
||||||
|
{ RC1, RC2, RC3, RC4, RC5, RC6, KC_NO, RC8 }, \
|
||||||
|
{ RD1, RD2, RD3, RD4, KC_NO, RD6, RD7, RD8 }, \
|
||||||
|
{ RE1, KC_NO, KC_NO, RE4, RE5, RE6, RE7, RE8 } \
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,74 @@
|
||||||
|
SRC += matrix.c \
|
||||||
|
i2c.c \
|
||||||
|
split_util.c \
|
||||||
|
serial.c
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1287
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Bootloader
|
||||||
|
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||||
|
# different sizes, comment this out, and the correct address will be loaded
|
||||||
|
# automatically (+60). See bootloader.mk for all options.
|
||||||
|
BOOTLOADER = caterina
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
|
# the appropriate keymap folder that will get included automatically
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
|
SUBPROJECT_rev1 = yes
|
||||||
|
USE_I2C = yes
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
|
||||||
|
CUSTOM_MATRIX = yes
|
||||||
|
|
||||||
|
DEFAULT_FOLDER = quefrency/rev1
|
||||||
|
|
@ -0,0 +1,228 @@
|
||||||
|
/*
|
||||||
|
* WARNING: be careful changing this code, it is very timing dependent
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef F_CPU
|
||||||
|
#define F_CPU 16000000
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include <avr/interrupt.h>
|
||||||
|
#include <util/delay.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include "serial.h"
|
||||||
|
|
||||||
|
#ifndef USE_I2C
|
||||||
|
|
||||||
|
// Serial pulse period in microseconds. Its probably a bad idea to lower this
|
||||||
|
// value.
|
||||||
|
#define SERIAL_DELAY 24
|
||||||
|
|
||||||
|
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
|
||||||
|
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
|
||||||
|
|
||||||
|
#define SLAVE_DATA_CORRUPT (1<<0)
|
||||||
|
volatile uint8_t status = 0;
|
||||||
|
|
||||||
|
inline static
|
||||||
|
void serial_delay(void) {
|
||||||
|
_delay_us(SERIAL_DELAY);
|
||||||
|
}
|
||||||
|
|
||||||
|
inline static
|
||||||
|
void serial_output(void) {
|
||||||
|
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
|
||||||
|
}
|
||||||
|
|
||||||
|
// make the serial pin an input with pull-up resistor
|
||||||
|
inline static
|
||||||
|
void serial_input(void) {
|
||||||
|
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
|
||||||
|
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
|
||||||
|
}
|
||||||
|
|
||||||
|
inline static
|
||||||
|
uint8_t serial_read_pin(void) {
|
||||||
|
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
|
||||||
|
}
|
||||||
|
|
||||||
|
inline static
|
||||||
|
void serial_low(void) {
|
||||||
|
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
|
||||||
|
}
|
||||||
|
|
||||||
|
inline static
|
||||||
|
void serial_high(void) {
|
||||||
|
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
|
||||||
|
}
|
||||||
|
|
||||||
|
void serial_master_init(void) {
|
||||||
|
serial_output();
|
||||||
|
serial_high();
|
||||||
|
}
|
||||||
|
|
||||||
|
void serial_slave_init(void) {
|
||||||
|
serial_input();
|
||||||
|
|
||||||
|
// Enable INT0
|
||||||
|
EIMSK |= _BV(INT0);
|
||||||
|
// Trigger on falling edge of INT0
|
||||||
|
EICRA &= ~(_BV(ISC00) | _BV(ISC01));
|
||||||
|
}
|
||||||
|
|
||||||
|
// Used by the master to synchronize timing with the slave.
|
||||||
|
static
|
||||||
|
void sync_recv(void) {
|
||||||
|
serial_input();
|
||||||
|
// This shouldn't hang if the slave disconnects because the
|
||||||
|
// serial line will float to high if the slave does disconnect.
|
||||||
|
while (!serial_read_pin());
|
||||||
|
serial_delay();
|
||||||
|
}
|
||||||
|
|
||||||
|
// Used by the slave to send a synchronization signal to the master.
|
||||||
|
static
|
||||||
|
void sync_send(void) {
|
||||||
|
serial_output();
|
||||||
|
|
||||||
|
serial_low();
|
||||||
|
serial_delay();
|
||||||
|
|
||||||
|
serial_high();
|
||||||
|
}
|
||||||
|
|
||||||
|
// Reads a byte from the serial line
|
||||||
|
static
|
||||||
|
uint8_t serial_read_byte(void) {
|
||||||
|
uint8_t byte = 0;
|
||||||
|
serial_input();
|
||||||
|
for ( uint8_t i = 0; i < 8; ++i) {
|
||||||
|
byte = (byte << 1) | serial_read_pin();
|
||||||
|
serial_delay();
|
||||||
|
_delay_us(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
return byte;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Sends a byte with MSB ordering
|
||||||
|
static
|
||||||
|
void serial_write_byte(uint8_t data) {
|
||||||
|
uint8_t b = 8;
|
||||||
|
serial_output();
|
||||||
|
while( b-- ) {
|
||||||
|
if(data & (1 << b)) {
|
||||||
|
serial_high();
|
||||||
|
} else {
|
||||||
|
serial_low();
|
||||||
|
}
|
||||||
|
serial_delay();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// interrupt handle to be used by the slave device
|
||||||
|
ISR(SERIAL_PIN_INTERRUPT) {
|
||||||
|
sync_send();
|
||||||
|
|
||||||
|
uint8_t checksum = 0;
|
||||||
|
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
|
||||||
|
serial_write_byte(serial_slave_buffer[i]);
|
||||||
|
sync_send();
|
||||||
|
checksum += serial_slave_buffer[i];
|
||||||
|
}
|
||||||
|
serial_write_byte(checksum);
|
||||||
|
sync_send();
|
||||||
|
|
||||||
|
// wait for the sync to finish sending
|
||||||
|
serial_delay();
|
||||||
|
|
||||||
|
// read the middle of pulses
|
||||||
|
_delay_us(SERIAL_DELAY/2);
|
||||||
|
|
||||||
|
uint8_t checksum_computed = 0;
|
||||||
|
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
|
||||||
|
serial_master_buffer[i] = serial_read_byte();
|
||||||
|
sync_send();
|
||||||
|
checksum_computed += serial_master_buffer[i];
|
||||||
|
}
|
||||||
|
uint8_t checksum_received = serial_read_byte();
|
||||||
|
sync_send();
|
||||||
|
|
||||||
|
serial_input(); // end transaction
|
||||||
|
|
||||||
|
if ( checksum_computed != checksum_received ) {
|
||||||
|
status |= SLAVE_DATA_CORRUPT;
|
||||||
|
} else {
|
||||||
|
status &= ~SLAVE_DATA_CORRUPT;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
inline
|
||||||
|
bool serial_slave_DATA_CORRUPT(void) {
|
||||||
|
return status & SLAVE_DATA_CORRUPT;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Copies the serial_slave_buffer to the master and sends the
|
||||||
|
// serial_master_buffer to the slave.
|
||||||
|
//
|
||||||
|
// Returns:
|
||||||
|
// 0 => no error
|
||||||
|
// 1 => slave did not respond
|
||||||
|
int serial_update_buffers(void) {
|
||||||
|
// this code is very time dependent, so we need to disable interrupts
|
||||||
|
cli();
|
||||||
|
|
||||||
|
// signal to the slave that we want to start a transaction
|
||||||
|
serial_output();
|
||||||
|
serial_low();
|
||||||
|
_delay_us(1);
|
||||||
|
|
||||||
|
// wait for the slaves response
|
||||||
|
serial_input();
|
||||||
|
serial_high();
|
||||||
|
_delay_us(SERIAL_DELAY);
|
||||||
|
|
||||||
|
// check if the slave is present
|
||||||
|
if (serial_read_pin()) {
|
||||||
|
// slave failed to pull the line low, assume not present
|
||||||
|
sei();
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
// if the slave is present syncronize with it
|
||||||
|
sync_recv();
|
||||||
|
|
||||||
|
uint8_t checksum_computed = 0;
|
||||||
|
// receive data from the slave
|
||||||
|
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
|
||||||
|
serial_slave_buffer[i] = serial_read_byte();
|
||||||
|
sync_recv();
|
||||||
|
checksum_computed += serial_slave_buffer[i];
|
||||||
|
}
|
||||||
|
uint8_t checksum_received = serial_read_byte();
|
||||||
|
sync_recv();
|
||||||
|
|
||||||
|
if (checksum_computed != checksum_received) {
|
||||||
|
sei();
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t checksum = 0;
|
||||||
|
// send data to the slave
|
||||||
|
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
|
||||||
|
serial_write_byte(serial_master_buffer[i]);
|
||||||
|
sync_recv();
|
||||||
|
checksum += serial_master_buffer[i];
|
||||||
|
}
|
||||||
|
serial_write_byte(checksum);
|
||||||
|
sync_recv();
|
||||||
|
|
||||||
|
// always, release the line when not in use
|
||||||
|
serial_output();
|
||||||
|
serial_high();
|
||||||
|
|
||||||
|
sei();
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,26 @@
|
||||||
|
#ifndef MY_SERIAL_H
|
||||||
|
#define MY_SERIAL_H
|
||||||
|
|
||||||
|
#include "config.h"
|
||||||
|
#include <stdbool.h>
|
||||||
|
|
||||||
|
/* TODO: some defines for interrupt setup */
|
||||||
|
#define SERIAL_PIN_DDR DDRD
|
||||||
|
#define SERIAL_PIN_PORT PORTD
|
||||||
|
#define SERIAL_PIN_INPUT PIND
|
||||||
|
#define SERIAL_PIN_MASK _BV(PD0)
|
||||||
|
#define SERIAL_PIN_INTERRUPT INT0_vect
|
||||||
|
|
||||||
|
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
|
||||||
|
#define SERIAL_MASTER_BUFFER_LENGTH 1
|
||||||
|
|
||||||
|
// Buffers for master - slave communication
|
||||||
|
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
|
||||||
|
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
|
||||||
|
|
||||||
|
void serial_master_init(void);
|
||||||
|
void serial_slave_init(void);
|
||||||
|
int serial_update_buffers(void);
|
||||||
|
bool serial_slave_data_corrupt(void);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,80 @@
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include <avr/wdt.h>
|
||||||
|
#include <avr/power.h>
|
||||||
|
#include <avr/interrupt.h>
|
||||||
|
#include <util/delay.h>
|
||||||
|
#include <avr/eeprom.h>
|
||||||
|
#include "split_util.h"
|
||||||
|
#include "matrix.h"
|
||||||
|
#include "keyboard.h"
|
||||||
|
#include "config.h"
|
||||||
|
#include "timer.h"
|
||||||
|
#include "pincontrol.h"
|
||||||
|
|
||||||
|
#ifdef USE_I2C
|
||||||
|
# include "i2c.h"
|
||||||
|
#else
|
||||||
|
# include "serial.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
volatile bool isLeftHand = true;
|
||||||
|
|
||||||
|
static void setup_handedness(void) {
|
||||||
|
// Test D2 pin for handedness, if D2 is grounded, it's the right hand
|
||||||
|
pinMode(D2, PinDirectionInput);
|
||||||
|
isLeftHand = digitalRead(D2);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void keyboard_master_setup(void) {
|
||||||
|
#ifdef USE_I2C
|
||||||
|
i2c_master_init();
|
||||||
|
#ifdef SSD1306OLED
|
||||||
|
matrix_master_OLED_init();
|
||||||
|
#endif
|
||||||
|
#else
|
||||||
|
serial_master_init();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
static void keyboard_slave_setup(void) {
|
||||||
|
timer_init();
|
||||||
|
#ifdef USE_I2C
|
||||||
|
i2c_slave_init(SLAVE_I2C_ADDRESS);
|
||||||
|
#else
|
||||||
|
serial_slave_init();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
bool has_usb(void) {
|
||||||
|
USBCON |= (1 << OTGPADE); //enables VBUS pad
|
||||||
|
_delay_us(5);
|
||||||
|
return (USBSTA & (1<<VBUS)); //checks state of VBUS
|
||||||
|
}
|
||||||
|
|
||||||
|
void split_keyboard_setup(void) {
|
||||||
|
setup_handedness();
|
||||||
|
|
||||||
|
if (has_usb()) {
|
||||||
|
keyboard_master_setup();
|
||||||
|
} else {
|
||||||
|
keyboard_slave_setup();
|
||||||
|
}
|
||||||
|
sei();
|
||||||
|
}
|
||||||
|
|
||||||
|
void keyboard_slave_loop(void) {
|
||||||
|
matrix_init();
|
||||||
|
|
||||||
|
while (1) {
|
||||||
|
matrix_slave_scan();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// this code runs before the usb and keyboard is initialized
|
||||||
|
void matrix_setup(void) {
|
||||||
|
split_keyboard_setup();
|
||||||
|
|
||||||
|
if (!has_usb()) {
|
||||||
|
keyboard_slave_loop();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,20 @@
|
||||||
|
#ifndef SPLIT_KEYBOARD_UTIL_H
|
||||||
|
#define SPLIT_KEYBOARD_UTIL_H
|
||||||
|
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include "eeconfig.h"
|
||||||
|
|
||||||
|
#define SLAVE_I2C_ADDRESS 0x32
|
||||||
|
|
||||||
|
extern volatile bool isLeftHand;
|
||||||
|
|
||||||
|
// slave version of matix scan, defined in matrix.c
|
||||||
|
void matrix_slave_scan(void);
|
||||||
|
|
||||||
|
void split_keyboard_setup(void);
|
||||||
|
bool has_usb(void);
|
||||||
|
void keyboard_slave_loop(void);
|
||||||
|
|
||||||
|
void matrix_master_OLED_init (void);
|
||||||
|
|
||||||
|
#endif
|
||||||
Loading…
Reference in New Issue