docs: some typos (#18582)

probably hacktoberism

Makefile

@@ -264,7 +264,7 @@ define PARSE_KEYMAP
     # The rest of the rule is the target
     # Remove the leading ":" from the target, as it acts as a separator
     MAKE_TARGET := $$(patsubst :%,%,$$(RULE))
-    # We need to generate an unique indentifer to append to the COMMANDS list
+    # We need to generate an unique identifier to append to the COMMANDS list
     CURRENT_KB_UNDER := $$(subst /,_,$$(CURRENT_KB))
     COMMAND := COMMAND_KEYBOARD_$$(CURRENT_KB_UNDER)_KEYMAP_$$(CURRENT_KM)
     # If we are compiling a keyboard without a subproject, we want to display just the name

builddefs/build_keyboard.mk

@@ -236,7 +236,7 @@ endif
 # that the same keymap may be used on multiple keyboards.
 #
 # We grab the most top-level include file that we can. That file should
-# use #ifdef statements to include all the neccesary subfolder includes,
+# use #ifdef statements to include all the necessary subfolder includes,
 # as described here:
 #
 #    https://docs.qmk.fm/#/feature_layouts?id=tips-for-making-layouts-keyboard-agnostic

builddefs/common_rules.mk

@@ -1,7 +1,7 @@
 # Hey Emacs, this is a -*- makefile -*-
 #----------------------------------------------------------------------------
 
-# Enable vpath seraching for source files only
+# Enable vpath searching for source files only
 # Without this, output files, could be read from the wrong .build directories
 VPATH_SRC := $(VPATH)
 vpath %.c $(VPATH_SRC)
@@ -85,7 +85,7 @@ ifeq ($(strip $(DEBUG_ENABLE)),yes)
 endif
 CXXFLAGS += $(CXXDEFS)
 CXXFLAGS += -O$(OPT)
-# to supress "warning: only initialized variables can be placed into program memory area"
+# to suppress "warning: only initialized variables can be placed into program memory area"
 CXXFLAGS += -w
 CXXFLAGS += -Wall
 CXXFLAGS += -Wundef

docs/api_docs.md

@@ -21,7 +21,7 @@ This service is an asynchronous API for compiling custom keymaps. You POST some
 }
 ```
 
-As you can see the payload describes all aspects of a keyboard necessary to create and generate a firmware. Each layer is a single list of QMK keycodes the same length as the keyboard's `LAYOUT` macro. If a keyboard supports mulitple `LAYOUT` macros you can specify which macro to use.
+As you can see the payload describes all aspects of a keyboard necessary to create and generate a firmware. Each layer is a single list of QMK keycodes the same length as the keyboard's `LAYOUT` macro. If a keyboard supports multiple `LAYOUT` macros you can specify which macro to use.
 
 ## Submitting a Compile Job
 

docs/cli_commands.md

@@ -223,7 +223,7 @@ Check your environment and report problems only:
 
 ## `qmk format-json`
 
-Formats a JSON file in a (mostly) human-friendly way. Will usually correctly detect the format of the JSON (info.json or keymap.json) but you can override this with `--format` if neccesary.
+Formats a JSON file in a (mostly) human-friendly way. Will usually correctly detect the format of the JSON (info.json or keymap.json) but you can override this with `--format` if necessary.
 
 **Usage**:
 

docs/cli_development.md

@@ -162,7 +162,7 @@ del(cli.config.<section>.<key>)
 
 ## Writing The Configuration File
 
-The configuration is not written out when it is changed. Most commands do not need to do this. We prefer to have the user change their configuration deliberitely using `qmk config`.
+The configuration is not written out when it is changed. Most commands do not need to do this. We prefer to have the user change their configuration deliberately using `qmk config`.
 
 You can use `cli.save_config()` to write out the configuration.
 

docs/coding_conventions_c.md

@@ -24,7 +24,7 @@ Most of our style is pretty easy to pick up on, but right now it's not entirely
   * Readability is more important than consistency.
   * Follow the file's existing style. If the file is mixed, follow the style that makes sense for the section you are modifying.
   * When indenting, keep the hash at the start of the line and add whitespace between `#` and `if`, starting with 4 spaces after the `#`.
-  * You can follow the indention level of the surrounding C code, or preprocessor directives can have their own indentation levels. Choose the style that best communicates the intent of your code.
+  * You can follow the indentation level of the surrounding C code, or preprocessor directives can have their own indentation levels. Choose the style that best communicates the intent of your code.
 
 Here is an example for easy reference:
 

docs/coding_conventions_python.md

@@ -2,7 +2,7 @@
 
 Most of our style follows PEP8 with some local modifications to make things less nit-picky. 
 
-* We target Python 3.7 for compatability with all supported platforms.
+* We target Python 3.7 for compatibility with all supported platforms.
 * We indent using four (4) spaces (soft tabs)
 * We encourage liberal use of comments
   * Think of them as a story describing the feature
@@ -21,7 +21,7 @@ You can use [yapf](https://github.com/google/yapf) to style your code. We provid
 
 We don't have a hard and fast rule for when to use `import ...` vs `from ... import ...`. Understandability and maintainability is our ultimate goal.
 
-Generally we prefer to import specific function and class names from a module to keep code shorter and easier to understand. Sometimes this results in a name that is ambiguous, and in such cases we prefer to import the module instead. You should avoid using the "as" keyword when importing, unless you are importing a compatability module.
+Generally we prefer to import specific function and class names from a module to keep code shorter and easier to understand. Sometimes this results in a name that is ambiguous, and in such cases we prefer to import the module instead. You should avoid using the "as" keyword when importing, unless you are importing a compatibility module.
 
 Imports should be one line per module. We group import statements together using the standard python rules- system, 3rd party, local.
 

docs/config_options.md

@@ -195,7 +195,7 @@ If you define these options you will enable the associated feature, which may in
 * `#define COMBO_TERM 200`
   * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined.
 * `#define COMBO_MUST_HOLD_MODS`
-  * Flag for enabling extending timeout on Combos containing modifers
+  * Flag for enabling extending timeout on Combos containing modifiers
 * `#define COMBO_MOD_TERM 200`
   * Allows for extending COMBO_TERM for mod keys while mid-combo.
 * `#define COMBO_MUST_HOLD_PER_COMBO`

docs/feature_macros.md

@@ -374,7 +374,7 @@ This will clear all keys besides the mods currently pressed.
 This macro will register `KC_LALT` and tap `KC_TAB`, then wait for 1000ms. If the key is tapped again, it will send another `KC_TAB`; if there is no tap, `KC_LALT` will be unregistered, thus allowing you to cycle through windows.
 
 ```c
-bool is_alt_tab_active = false; // ADD this near the begining of keymap.c
+bool is_alt_tab_active = false; // ADD this near the beginning of keymap.c
 uint16_t alt_tab_timer = 0;     // we will be using them soon.
 
 enum custom_keycodes {          // Make sure have the awesome keycode ready

docs/feature_oled_driver.md

@@ -259,12 +259,12 @@ void oled_render(void);
 void oled_set_cursor(uint8_t col, uint8_t line);
 
 // Advances the cursor to the next page, writing ' ' if true
-// Wraps to the begining when out of bounds
+// Wraps to the beginning when out of bounds
 void oled_advance_page(bool clearPageRemainder);
 
 // Moves the cursor forward 1 character length
 // Advance page if there is not enough room for the next character
-// Wraps to the begining when out of bounds
+// Wraps to the beginning when out of bounds
 void oled_advance_char(void);
 
 // Writes a single character to the buffer at current cursor position

docs/feature_rgb_matrix.md

@@ -270,7 +270,7 @@ Configure the hardware via your `config.h`:
 | `ISSI_CONFIGURATION` | (Optional) Configuration for the Configuration Register | |
 | `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
 | `ISSI_PULLDOWNUP` | (Optional) Configuration for the Pull Up & Pull Down Register | |
-| `ISSI_TEMP` | (Optional) Configuration for the Tempature Register | |
+| `ISSI_TEMP` | (Optional) Configuration for the Temperature Register | |
 | `ISSI_PWM_ENABLE` | (Optional) Configuration for the PWM Enable Register | |
 | `ISSI_PWM_SET` | (Optional) Configuration for the PWM Setting Register | |
 | `ISSI_SCAL_RED` | (Optional) Configuration for the RED LEDs in Scaling Registers | 0xFF |

quantum/action_layer.c

@@ -71,21 +71,21 @@ void default_layer_set(layer_state_t state) {
 #ifndef NO_ACTION_LAYER
 /** \brief Default Layer Or
  *
- * Turns on the default layer based on matching bits between specifed layer and existing layer state
+ * Turns on the default layer based on matching bits between specified layer and existing layer state
  */
 void default_layer_or(layer_state_t state) {
     default_layer_state_set(default_layer_state | state);
 }
 /** \brief Default Layer And
  *
- * Turns on default layer based on matching enabled bits between specifed layer and existing layer state
+ * Turns on default layer based on matching enabled bits between specified layer and existing layer state
  */
 void default_layer_and(layer_state_t state) {
     default_layer_state_set(default_layer_state & state);
 }
 /** \brief Default Layer Xor
  *
- * Turns on default layer based on non-matching bits between specifed layer and existing layer state
+ * Turns on default layer based on non-matching bits between specified layer and existing layer state
  */
 void default_layer_xor(layer_state_t state) {
     default_layer_state_set(default_layer_state ^ state);
@@ -115,7 +115,7 @@ __attribute__((weak)) layer_state_t layer_state_set_kb(layer_state_t state) {
 
 /** \brief Layer state set
  *
- * Sets the layer to match the specifed state (a bitmask)
+ * Sets the layer to match the specified state (a bitmask)
  */
 void layer_state_set(layer_state_t state) {
     state = layer_state_set_kb(state);
@@ -193,21 +193,21 @@ void layer_invert(uint8_t layer) {
 
 /** \brief Layer or
  *
- * Turns on layers based on matching bits between specifed layer and existing layer state
+ * Turns on layers based on matching bits between specified layer and existing layer state
  */
 void layer_or(layer_state_t state) {
     layer_state_set(layer_state | state);
 }
 /** \brief Layer and
  *
- * Turns on layers based on matching enabled bits between specifed layer and existing layer state
+ * Turns on layers based on matching enabled bits between specified layer and existing layer state
  */
 void layer_and(layer_state_t state) {
     layer_state_set(layer_state & state);
 }
 /** \brief Layer xor
  *
- * Turns on layers based on non-matching bits between specifed layer and existing layer state
+ * Turns on layers based on non-matching bits between specified layer and existing layer state
  */
 void layer_xor(layer_state_t state) {
     layer_state_set(layer_state ^ state);

util/docker_build.sh

@@ -19,7 +19,7 @@ if [ $# -gt 1 ]; then
 	exit 1
 fi
 
-# Allow $RUNTIME to be overriden by the user as an environment variable
+# Allow $RUNTIME to be overridden by the user as an environment variable
 # Else check if either docker or podman exit and set them as runtime
 # if none are found error out
 if [ -z "$RUNTIME" ]; then
@@ -36,7 +36,7 @@ if [ -z "$RUNTIME" ]; then
 		exit 2
 	fi
 fi
-	
+
 
 # Determine arguments
 if [ $# -eq 0 ]; then

util/docker_cmd.sh

@@ -15,7 +15,7 @@ for arg; do
 	fi
 done
 
-# Allow $RUNTIME to be overriden by the user as an environment variable
+# Allow $RUNTIME to be overridden by the user as an environment variable
 # Else check if either docker or podman exit and set them as runtime
 # if none are found error out
 if [ -z "$RUNTIME" ]; then