Minor updates to docs (#2406)
* [docs/] Cleaning up some language to make it more clear. * [docs/] Adding instructions for installing deps on RH / Fedora.daktil_thumb_popravljen
Ben Hilburn
Jack Humbert
parent
0e92d99cdc
commit
8df2ee4ec3
|
|
@ -1,40 +1,25 @@
|
|||
# Frequently Asked Build Questions
|
||||
|
||||
This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
|
||||
This page covers questions about building QMK. If you haven't yet done so, you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
|
||||
|
||||
## Can't Program on Linux
|
||||
You will need proper permission to operate a device. For Linux users see udev rules below. Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.
|
||||
You will need proper permissions to operate a device. For Linux users, see the instructions regarding `udev` rules, below. If you have issues with `udev`, a work-around is to use the `sudo` command. If you are not familiar with this command, check its manual with `man sudo` or [see this webpage](https://linux.die.net/man/8/sudo).
|
||||
|
||||
In short when your controller is ATMega32u4,
|
||||
An example of using `sudo`, when your controller is ATMega32u4:
|
||||
|
||||
$ sudo dfu-programmer atmega32u4 erase --force
|
||||
$ sudo dfu-programmer atmega32u4 flash your.hex
|
||||
$ sudo dfu-programmer atmega32u4 reset
|
||||
|
||||
or just
|
||||
or just:
|
||||
|
||||
$ sudo make <keyboard>:<keymap>:dfu
|
||||
|
||||
But to run `make` with root privilege is not good idea. Use former method if possible.
|
||||
|
||||
## WINAVR is Obsolete
|
||||
It is no longer recommended and may cause some problem.
|
||||
See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
|
||||
|
||||
## USB VID and PID
|
||||
You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
|
||||
|
||||
Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
|
||||
|
||||
Also see this.
|
||||
https://github.com/tmk/tmk_keyboard/issues/150
|
||||
|
||||
You can buy a really unique VID:PID here. I don't think you need this for personal use.
|
||||
- http://www.obdev.at/products/vusb/license.html
|
||||
- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
|
||||
Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
|
||||
|
||||
## Linux `udev` Rules
|
||||
On Linux you need proper privilege to access device file of MCU, you'll have to use `sudo` when flashing firmware. You can circumvent this with placing these files in `/etc/udev/rules.d/`.
|
||||
On Linux, you'll need proper privileges to access the MCU. You can either use
|
||||
`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
|
||||
|
||||
**/etc/udev/rules.d/50-atmel-dfu.rules:**
|
||||
```
|
||||
|
|
@ -52,6 +37,21 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
|
|||
SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
|
||||
```
|
||||
|
||||
## WINAVR is Obsolete
|
||||
It is no longer recommended and may cause some problem.
|
||||
See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
|
||||
|
||||
## USB VID and PID
|
||||
You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
|
||||
|
||||
Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
|
||||
|
||||
Also see this.
|
||||
https://github.com/tmk/tmk_keyboard/issues/150
|
||||
|
||||
You can buy a really unique VID:PID here. I don't think you need this for personal use.
|
||||
- http://www.obdev.at/products/vusb/license.html
|
||||
- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
|
||||
|
||||
## Cortex: `cstddef: No such file or directory`
|
||||
GCC 4.8 of Ubuntu 14.04 had this problem and had to update to 4.9 with this PPA.
|
||||
|
|
@ -61,7 +61,6 @@ https://github.com/tmk/tmk_keyboard/issues/212
|
|||
https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef
|
||||
https://developer.mbed.org/forum/mbed/topic/5205/
|
||||
|
||||
|
||||
## `clock_prescale_set` and `clock_div_1` Not Available
|
||||
Your toolchain is too old to support the MCU. For example WinAVR 20100110 doesn't support ATMega32u2.
|
||||
|
||||
|
|
|
|||
|
|
@ -31,11 +31,14 @@ git
|
|||
|
||||
Install the dependencies with your favorite package manager.
|
||||
|
||||
Debian/Ubuntu example:
|
||||
Debian / Ubuntu example:
|
||||
|
||||
sudo apt-get update
|
||||
sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi
|
||||
|
||||
Fedora / Red Hat example:
|
||||
sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
|
||||
|
||||
## Nix
|
||||
|
||||
If you're on [NixOS](https://nixos.org/), or have Nix installed on Linux or macOS, run `nix-shell` from the repository root to get a build environment.
|
||||
|
|
|
|||
|
|
@ -33,7 +33,7 @@ The state of the Keymap layer is determined by two 32 bit parameters:
|
|||
* **`default_layer_state`** indicates a base keymap layer (0-31) which is always valid and to be referred (the default layer).
|
||||
* **`layer_state`** has current on/off status of each layer in its bits.
|
||||
|
||||
Keymap layer '0' is usually `default_layer`, wither other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
|
||||
Keymap layer '0' is usually the `default_layer`, with other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
|
||||
|
||||
Initial state of Keymap Change base layout
|
||||
----------------------- ------------------
|
||||
|
|
|
|||
Loading…
Reference in New Issue