Add config for Atreus based on Adafruit Feather BLE (#9140)
Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Erovia <Erovia@users.noreply.github.com>master
Randall Mason
GitHub
parent
6609197cde
commit
817de51c12
|
|
@ -22,6 +22,8 @@
|
|||
#include "astar.h"
|
||||
#elif KEYBOARD_atreus_astar_mirrored
|
||||
#include "astar_mirrored.h"
|
||||
#elif KEYBOARD_atreus_feather
|
||||
#include "feather.h"
|
||||
#elif KEYBOARD_atreus_teensy2
|
||||
#include "teensy2.h"
|
||||
#elif KEYBOARD_atreus_promicro
|
||||
|
|
|
|||
|
|
@ -0,0 +1,40 @@
|
|||
/* Copyright 2019
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
// #define MATRIX_ROW_PINS { D0, D1, D3, D2 }
|
||||
// #define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 }
|
||||
#define MATRIX_ROW_PINS { B7, D6, C7, F5 }
|
||||
#define MATRIX_COL_PINS { D7, B5, D1, D0, C6, B6, F0, D2, D3, F4, F1 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define OUTPUT_AUTO_ENABLE
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
/* Copyright 2019
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "feather.h"
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
/* Copyright 2019
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
# Bluetreus - a conversion of an Atreus to use a Bluetooth microcontroller
|
||||
|
||||
I have created a keymap for this with Bluetooth control on layer 2 so that you
|
||||
can switch the keyboard between auto, USB only, and Bluetooth only. I'm
|
||||
working on fixing turning on auto by default, but have still not succeeded.
|
||||
|
||||
To build it and flash it, do:
|
||||
|
||||
```
|
||||
make atreus/feather:clash:flash
|
||||
```
|
||||
|
||||
## Wiring it up
|
||||
Physically, SDA to pin 13 on the new board are connected to what 9-1 were
|
||||
connected to on the old board. Pin 0 from the old board is brought over to the
|
||||
other side with a jumper wire to pin a2. TX, RX, A5, A4, A3 on the new board
|
||||
connect to what a0 to 12 connected to on the old board. GND attaches to g.
|
||||
You have to bend some of the pins at about a 45 degree angle to make them line up.
|
||||
Here's a side view of what the most bent pins look like:
|
||||
|
||||
Here's a top view, USB port down, wireless antenna up. Note: the USB port orientation is opposite what it used to be.
|
||||
|
||||
|
||||
### New board:
|
||||
This is an [Adafruit Feather BLE](https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/pinouts)
|
||||
|
||||
|QMK | Screen Print | Feather |SCREEN|QMK REF |
|
||||
|----|--------------|-------------|------|---------|
|
||||
| D1 | SDA | RADIO | dfu | |
|
||||
| D0 | SCL | | 1/TX | D3 |
|
||||
| C6 | 5 | | 0/RX | D2 |
|
||||
| D7 | 6 | | MISO | B3/Blue |
|
||||
| B5 | 9 | | MOSI | B2/Blue |
|
||||
| B6 | 10 | | SCK | B1/Blue |
|
||||
| B7 | 11 | | A5 | F0 |
|
||||
| D6 | 12 | | a4 | F1 |
|
||||
| C7 | 13 | | a3 | F4 |
|
||||
| | usb | | a2 | F5 |
|
||||
| | e0 | | a1 | F6 |
|
||||
| | bat | | a0 | |
|
||||
| | Battery | | GND | |
|
||||
| | Connector | | ARf | |
|
||||
| | | | | USB PORT | 3V | |
|
||||
| | v v | | RST | |
|
||||
|
||||
### Old board:
|
||||
This is an A Star, non-flipped
|
||||
|
||||
|QMK| Scrn | A | Scrn|QMK |
|
||||
|---|------|-----|-----|----|
|
||||
| b5| 9 | USB | a0 | F7 |
|
||||
| b4| 8 | port| a1 | F6 |
|
||||
| e6| 7 | | 10 | B6 |
|
||||
| d7| 6 | | 11 | B7 |
|
||||
| c6| 5 | | 12 | D6 |
|
||||
| d4| 4 | | rst | RST|
|
||||
| d0| 3 | | 3v | x |
|
||||
| d1| 2 | | 5v | x |
|
||||
| d3| 1 | | g | G |
|
||||
| d2| 0 | | v | x |
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency
|
||||
F_CPU = 8000000
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BLUETOOTH = AdafruitBLE
|
||||
CONSOLE_ENABLE = no
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _QW 0
|
||||
#define _RS 1
|
||||
#define _LW 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_QW] = LAYOUT( /* Qwerty */
|
||||
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P ,
|
||||
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN ,
|
||||
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH ,
|
||||
KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT
|
||||
),
|
||||
|
||||
/*
|
||||
* ! @ up { } || pgup 7 8 9 *
|
||||
* # left down right $ || pgdn 4 5 6 +
|
||||
* [ ] ( ) & || ` 1 2 3 \
|
||||
* lower insert super shift del ctrl || alt space fn . 0 =
|
||||
*/
|
||||
[_RS] = LAYOUT( /* [> RAISE <] */
|
||||
KC_EXLM, KC_AT, KC_UP, KC_LCBR, KC_RCBR, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR ,
|
||||
KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS ,
|
||||
KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS ,
|
||||
TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_DEL, KC_LCTL, KC_LALT, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL ),
|
||||
/*
|
||||
* insert home mup end pgup || mouse1 F7 F8 F9 F10
|
||||
* USB mlft mdwn mrght pgdn || mouse2 F4 F5 F6 F11
|
||||
* Blue volup reset || mouse3 F1 F2 F3 F12
|
||||
* auto voldn super shift bksp ctrl || alt space L0 prtsc scroll pause
|
||||
*/
|
||||
[_LW] = LAYOUT( /* [> LOWER <] */
|
||||
KC_INS, KC_HOME, KC_MS_U, KC_END, KC_PGUP, KC_BTN1, KC_F7, KC_F8, KC_F9, KC_F10 ,
|
||||
OUT_USB, KC_MS_L, KC_MS_D, KC_MS_R, KC_PGDN, KC_BTN2, KC_F4, KC_F5, KC_F6, KC_F11 ,
|
||||
OUT_BT, KC_VOLU, KC_NO, KC_NO, RESET, KC_BTN3, KC_F1, KC_F2, KC_F3, KC_F12 ,
|
||||
OUT_AUTO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS )
|
||||
};
|
||||
Loading…
Reference in New Issue