Merge branch 'ibm4704_fix_protocol'

daktil_thumb_popravljen
tmk 2015-05-19 00:40:49 +09:00
commit 81137b7a61
11 changed files with 74 additions and 58 deletions

View File

@ -8,6 +8,7 @@ Keyboard initialization process takes a few seconds at start up. During that you
Update
------
2015/05/05 Added keymaps for 107-key, 77-key and 50-key. Thanks, orihalcon @ geekhack!
2015/05/19 Fixed a protocol handling bug.

View File

@ -51,9 +51,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define IBM4704_DATA_DDR DDRD
#define IBM4704_DATA_BIT 0
/* Pin interrupt on rising edge */
#define IBM4704_INT_INIT() do { EICRA |= ((1<<ISC11)|(0<<ISC10)); } while (0)
#define IBM4704_INT_ON() do { EIMSK |= (1<<INT1); } while (0)
/* Pin interrupt on rising edge of clock */
#define IBM4704_INT_INIT() do { EICRA |= ((1<<ISC11)|(1<<ISC10)); } while (0)
#define IBM4704_INT_ON() do { EIFR |= (1<<INTF1); EIMSK |= (1<<INT1); } while (0)
#define IBM4704_INT_OFF() do { EIMSK &= ~(1<<INT1); } while (0)
#define IBM4704_INT_VECT INT1_vect

View File

@ -57,15 +57,15 @@ Keyboard to Host
----------------
Data bits are LSB first and Pairty is odd. Clock has around 60us high and 30us low part.
____ __ __ __ __ __ __ __ __ __ ________
Clock \____/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
____ __ __ __ __ __ __ __ __ __ _______
Clock \_____/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
____ ____ ____ ____ ____ ____ ____ ____ ____ ____
Data ____/ X____X____X____X____X____X____X____X____X____X________
Start 0 1 2 3 4 5 6 7 P Stop
Start bit: can be long as 300-350us.
Inhibit: Pull Data line down to inhibit keyboard to send.
Timing: Host reads bit while Clock is hi.
Timing: Host reads bit while Clock is hi.(rising edge)
Stop bit: Keyboard pulls down Data line to lo after 9th clock.
@ -166,13 +166,14 @@ Data sent from host:
| `-----`--- scan code
`------------- enable bit(0: enable repeat, 1: enable break)
00-77 Enable repeat(78-7F: invalid scancode)
80-F7 Enable break(F8-FF: invalid scancode)
00-79 Enable repeat
80-F9 Enable break(FA-FF are used as other commands, see above.)
FE Resend(011ah) no need to use
FF End(0114h) exits FC command mode.
Response from keyboard:
FD Out of bound - Invalid scancode
-- OK - No response means that command is accepted.
Examples:
To enable break code of all keys.

View File

@ -67,35 +67,31 @@ uint8_t matrix_cols(void)
static void enable_break(void)
{
uint8_t ret;
print("Enable break: ");
// valid scancode: 00-79h
for (uint8_t code = 0; code < 0x7A; code++) {
while (ibm4704_send(0x80|code)) _delay_ms(1);
// get none when ok, get FD when out of bound
_delay_ms(5);
if ((ret = ibm4704_recv()) != 0xff) {
xprintf("c%02X:r%02X ", code, ret);
}
_delay_ms(1);
while (ibm4704_send(0x80|code)) _delay_ms(10);
_delay_ms(5); // wait for response
// No response(FF) when ok, FD when out of bound
xprintf("s%02X:r%02X ", code, ibm4704_recv());
}
_delay_us(1000);
while (ibm4704_send(0xFF)) { _delay_ms(1); } // End
while (ibm4704_send(0xFF)) { _delay_ms(10); } // End
print("End\n");
}
void matrix_setup(void)
{
ibm4704_init();
}
void matrix_init(void)
{
debug_enable = true;
ibm4704_init();
matrix_clear();
_delay_ms(2000); // wait for starting up debug console
print("IBM 4704 converter\n");
while (ibm4704_send(0xFE)) _delay_ms(1); // resend
_delay_ms(5);
matrix_clear();
_delay_ms(2000); // wait for keyboard starting up
xprintf("Keyboard ID: %02X\n", ibm4704_recv());
enable_break();
}

View File

@ -85,6 +85,8 @@ void suspend_power_down(void)
power_down(WDTO_15MS);
}
__attribute__ ((weak)) void matrix_power_up(void) {}
__attribute__ ((weak)) void matrix_power_down(void) {}
bool suspend_wakeup_condition(void)
{
matrix_power_up();

View File

@ -62,6 +62,12 @@ static bool has_ghost_in_row(uint8_t row)
#endif
__attribute__ ((weak)) void matrix_setup(void) {}
void keyboard_setup(void)
{
matrix_setup();
}
void keyboard_init(void)
{
timer_init();

View File

@ -58,13 +58,15 @@ static inline bool IS_RELEASED(keyevent_t event) { return (!IS_NOEVENT(event) &&
}
/* it runs once at early stage of startup before keyboard_init. */
void keyboard_setup(void);
/* it runs once after initializing host side protocol, debug and MCU peripherals. */
void keyboard_init(void);
/* it runs repeatedly in main loop */
void keyboard_task(void);
/* it runs when host LED status is updated */
void keyboard_set_leds(uint8_t leds);
__attribute__ ((weak)) void matrix_power_up(void) {}
__attribute__ ((weak)) void matrix_power_down(void) {}
#ifdef __cplusplus
}
#endif

View File

@ -43,7 +43,9 @@ extern "C" {
uint8_t matrix_rows(void);
/* number of matrix columns */
uint8_t matrix_cols(void);
/* intialize matrix for scaning. should be called once. */
/* should be called at early stage of startup before matrix_init.(optional) */
void matrix_setup(void);
/* intialize matrix for scaning. */
void matrix_init(void);
/* scan all key states on matrix */
uint8_t matrix_scan(void);

View File

@ -21,9 +21,10 @@ uint8_t ibm4704_error = 0;
void ibm4704_init(void)
{
inhibit(); // keep keyboard from sending
IBM4704_INT_INIT();
IBM4704_INT_ON();
idle();
idle(); // allow keyboard sending
}
/*
@ -104,22 +105,6 @@ uint8_t ibm4704_recv_response(void)
return rbuf_dequeue();
}
/*
Keyboard to Host
----------------
Data bits are LSB first and Parity is odd. Clock has around 60us high and 30us low part.
____ __ __ __ __ __ __ __ __ __ ________
Clock \____/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
____ ____ ____ ____ ____ ____ ____ ____ ____ ____
Data ____/ X____X____X____X____X____X____X____X____X____X________
Start 0 1 2 3 4 5 6 7 P Stop
Start bit: can be long as 300-350us.
Inhibit: Pull Data line down to inhibit keyboard to send.
Timing: Host reads bit while Clock is hi.
Stop bit: Keyboard pulls down Data line to lo after 9th clock.
*/
uint8_t ibm4704_recv(void)
{
if (rbuf_has_data()) {
@ -129,26 +114,35 @@ uint8_t ibm4704_recv(void)
}
}
/*
Keyboard to Host
----------------
Data bits are LSB first and Parity is odd. Clock has around 60us high and 30us low part.
____ __ __ __ __ __ __ __ __ __ _______
Clock \_____/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
____ ____ ____ ____ ____ ____ ____ ____ ____ ____
Data ____/ X____X____X____X____X____X____X____X____X____X________
Start 0 1 2 3 4 5 6 7 P Stop
Start bit: can be long as 300-350us.
Inhibit: Pull Data line down to inhibit keyboard to send.
Timing: Host reads bit while Clock is hi.(rising edge)
Stop bit: Keyboard pulls down Data line to lo after 9th clock.
*/
ISR(IBM4704_INT_VECT)
{
static enum {
INIT, START, BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, BIT6, BIT7, PARITY,
} state = INIT;
BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, BIT6, BIT7, PARITY, STOP
} state = BIT0;
// LSB first
static uint8_t data = 0;
// Odd parity
static uint8_t parity = false;
ibm4704_error = 0;
// return unless falling edge
if (clock_in()) { goto RETURN; } // why this occurs?
state++;
switch (state) {
case START:
// Data:Low
WAIT(data_hi, 10, state);
break;
case BIT0:
case BIT1:
case BIT2:
@ -169,6 +163,10 @@ ISR(IBM4704_INT_VECT)
}
if (!parity)
goto ERROR;
break;
case STOP:
// Data:Low
WAIT(data_lo, 100, state);
rbuf_enqueue(data);
ibm4704_error = IBM4704_ERR_NONE;
goto DONE;
@ -176,13 +174,14 @@ ISR(IBM4704_INT_VECT)
default:
goto ERROR;
}
state++;
goto RETURN;
ERROR:
ibm4704_error = state;
while (ibm4704_send(0xFE)) _delay_ms(1); // resend
xprintf("R:%02X%02X\n", state, data);
DONE:
state = INIT;
state = BIT0;
data = 0;
parity = false;
RETURN:

View File

@ -544,7 +544,7 @@ int8_t sendchar(uint8_t c)
/*******************************************************************************
* main
******************************************************************************/
static void SetupHardware(void)
static void setup_mcu(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
@ -552,7 +552,10 @@ static void SetupHardware(void)
/* Disable clock division */
clock_prescale_set(clock_div_1);
}
static void setup_usb(void)
{
// Leonardo needs. Without this USB device is not recognized.
USB_Disable();
@ -566,7 +569,9 @@ static void SetupHardware(void)
int main(void) __attribute__ ((weak));
int main(void)
{
SetupHardware();
setup_mcu();
keyboard_setup();
setup_usb();
sei();
/* wait for USB startup & debug output */

View File

@ -46,6 +46,8 @@ int main(void)
// set for 16 MHz clock
CPU_PRESCALE(0);
keyboard_setup();
// Initialize the USB, and then wait for the host to set configuration.
// If the Teensy is powered without a PC connected to the USB port,
// this will wait forever.