QMK Configurator support for Maxipad keypad (#3307)

keyboards/maxipad/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "maxipad",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 6,
+  "height": 5,
+  "layouts": {
+      "LAYOUT": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}]
+      }
+  }
+}

keyboards/maxipad/keymaps/default/keymap.c

@@ -1,14 +1,14 @@
 #include "maxipad.h"
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP( /* Base */
+[0] = LAYOUT( /* Base */
   KC_ESC,  KC_1,    KC_2,  KC_3,  KC_4,  KC_5, \
   KC_TAB,  KC_Q,    KC_W,  KC_E,  KC_R,  KC_T, \
   MO(1),   KC_A,    KC_S,  KC_D,  KC_F,  KC_G, \
   KC_LSFT, KC_Z,    KC_X,  KC_C,  KC_V,  KC_B, \
   KC_LCTL, KC_LALT, MO(1), KC_ENT,KC_GRV,KC_SPC \
 ),
-[1] = KEYMAP(
+[1] = LAYOUT(
   KC_GRV,  KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, \
   KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \
   KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \

keyboards/maxipad/maxipad.h

@@ -7,7 +7,7 @@
 // The following is an example using the Planck MIT layout
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
+#define LAYOUT( \
     k00, k01, k02, k03, k04, k05, \
     k10, k11, k12, k13, k14, k15, \
     k20, k21, k22, k23, k24, k25, \

keyboards/maxipad/readme.md

@@ -1,4 +1,4 @@
-Maxipad keyboard firmware
+# Maxipad
 
 ## Quantum MK Firmware
 
@@ -7,23 +7,11 @@ For the full Quantum feature list, see [the parent readme.md](/readme.md).
 If you are using a pro micro then make sure to enable USE_PRO_MICRO in the makefile
 Change the config.h pinout to match your mcu!!
 
-Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
-
 Depending on which keymap you would like to use, you will have to compile slightly differently.
 
 ### Default
 
-To build with the default keymap, simply run `make`.
-
+To build with the default keymap, simply run `make maxipad:default`.
 
 ### Other Keymaps
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
-
-
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
-
-```
-$ make [default|jack|<name>]
-```
-
-Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.