g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Move BACKLIGHT_PWM_PERIOD to correct docs section (#22480)

master
Joel Challis 2023-11-22 00:41:19 +00:00 committed by GitHub
parent 46b996a55e
commit 7ae826476e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 7 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
docs/feature_backlight.md
View File

@ -40,7 +40,6 @@ Add the following to your `config.h`:
|`BACKLIGHT_DEFAULT_ON` |`true` |Enable backlight upon clearing the EEPROM |
|`BACKLIGHT_DEFAULT_BREATHING`|`false` |Whether to enable backlight breathing upon clearing the EEPROM |
|`BACKLIGHT_DEFAULT_LEVEL` |`BACKLIGHT_LEVELS`|The default backlight level to use upon clearing the EEPROM |
|`BACKLIGHT_PWM_PERIOD` |2048Hz |Defaults to `BACKLIGHT_PWM_COUNTER_FREQUENCY / 2048`, which results in a PWM frequency of 2048Hz. |
Unless you are designing your own keyboard, you generally should not need to change the `BACKLIGHT_PIN` or `BACKLIGHT_ON_STATE`.
@ -174,11 +173,13 @@ Depending on the ChibiOS board configuration, you may need to enable PWM at the
The following `#define`s apply only to the `pwm` driver:
|Define |Default |Description |
|-----------------------|--------|-----------------------------------|
|`BACKLIGHT_PWM_DRIVER` |`PWMD4` |The PWM driver to use |
|`BACKLIGHT_PWM_CHANNEL`|`3` |The PWM channel to use |
|`BACKLIGHT_PAL_MODE` |`2` |The pin alternative function to use|
|Define |Default |Description |
|-----------------------|-------------|---------------------------------------------------------------|
|`BACKLIGHT_PWM_DRIVER` |`PWMD4` |The PWM driver to use |
|`BACKLIGHT_PWM_CHANNEL`|`3` |The PWM channel to use |
|`BACKLIGHT_PAL_MODE` |`2` |The pin alternative function to use |
|`BACKLIGHT_PWM_PERIOD` |*Not defined*|The PWM period in counter ticks - Default is platform dependent|
Refer to the ST datasheet for your particular MCU to determine these values. For example, these defaults are set up for pin `B8` on a Proton-C (STM32F303) using `TIM4_CH3` on AF2. Unless you are designing your own keyboard, you generally should not need to change them.