Add VIA support to MxSS, plus minor tweaks (#7809)
* Add VIA support to mxss and general cleanup * Add support for RGB test for FLEDs * Add LAYOUT_all to allow for more configuration * Remove blank layers * Updated readme * Improve use of EEPROM * Credit where its due * Use the latest iteration of rgblight code * Keep the RGB timer running if the front LED is in RGB mode * Fix RGB breathing animation * Better supported RGB animation Only thing not working is alternating, but that's not too important * Abstract front LED handlers from main kb code * Add support for indicator LED color changing * Remove debug statement * Persist indicator LED colors * Mark custom sections in rgblight.c * Light commenting * Fix up keymaps * Add/update comments * Remove bloat from default hex * Tidy a stray tab * Out with the old, in with the new * Out with the old, in with the new * Add LAYER_STATE_8BIT for VIA keymapmaster
Jumail Mundekkat
ridingqwerty
parent
7f7b6b08e8
commit
645c5fabf2
|
|
@ -21,12 +21,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define VENDOR_ID 0x4D78 // "Mx" -> MxBlue
|
||||
#define PRODUCT_ID 0x5353 // "SS" -> MxSS
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER MxBlue
|
||||
#define PRODUCT MxSS
|
||||
#define DESCRIPTION Custom Polycarb Keyboard
|
||||
#define DESCRIPTION MxSS Polycarb Keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
|
|
@ -56,6 +56,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
// Just for posterity, define bootlite matrix pos
|
||||
#define BOOTMAGIC_LITE_ROW 0
|
||||
#define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
||||
// FLED config takes up 1 byte, stored color count takes 1, stored colors take up to 8
|
||||
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 10
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -15,31 +15,32 @@
|
|||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
hs_set caps_color = { .hue = 0, .sat = 255 };
|
||||
|
||||
// Colors for layers
|
||||
// Format: {hue, saturation}
|
||||
// {0, 0} to turn off the LED
|
||||
// Add additional rows to handle more layers
|
||||
const hs_set layer_colors[] = {
|
||||
[0] = {0, 0}, // Color for Layer 0
|
||||
[1] = {86, 255}, // Color for Layer 1
|
||||
[2] = {36, 255}, // Color for Layer 2
|
||||
[3] = {185, 255}, // Color for Layer 3
|
||||
hs_set layer_colors[4] = {
|
||||
[0] = {.hue = 0, .sat = 0}, // Color for Layer 0
|
||||
[1] = {.hue = 86, .sat = 255}, // Color for Layer 1
|
||||
[2] = {.hue = 36, .sat = 255}, // Color for Layer 2
|
||||
[3] = {.hue = 185, .sat = 255}, // Color for Layer 3
|
||||
};
|
||||
const size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t);
|
||||
size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t);
|
||||
|
||||
// Use NEW_SAFE_RANGE to define new custom keycodes in order to not overwrite the ones used for front LED control
|
||||
enum custom_keycodes {
|
||||
MY_KEYCODE = NEW_SAFE_RANGE,
|
||||
MY_KEYCODE = NEW_SAFE_RANGE,
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
LAYOUT( /* Base */
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
LAYOUT( /* L1 */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,19 @@
|
|||
/* Copyright 2018 Jumail Mundekkat / MxBlue
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define LAYER_STATE_8BIT
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/* Copyright 2018 Jumail Mundekkat / MxBlue
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
LAYOUT_all( /* L0 */
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
LAYOUT_all( /* L1 */
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PSCR, FLED_VAD, FLED_VAI, FLED_MOD, RGB_VAI,
|
||||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, RGB_MOD, RGB_SAI, RGB_TOG,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
VIA_ENABLE = yes
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
/* Copyright 2018 Jumail Mundekkat / MxBlue
|
||||
/* Copyright 2020 Jumail Mundekkat / MxBlue
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -12,63 +12,29 @@
|
|||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
* EEPROM management code from ../cannonkeys/stm32f072/keyboard.c
|
||||
*/
|
||||
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "tmk_core/common/eeprom.h"
|
||||
#include "tmk_core/common/action_layer.h"
|
||||
#include "rgblight.h"
|
||||
#include "via.h"
|
||||
#include "version.h" // for QMK_BUILDDATE used in EEPROM magic
|
||||
|
||||
// Variables for controlling front LED application
|
||||
uint8_t fled_mode; // Mode for front LEDs
|
||||
uint8_t fled_val; // Brightness for front leds (0 - 255)
|
||||
LED_TYPE fleds[2]; // Front LED rgb values for indicator mode use
|
||||
|
||||
// Predefined colors for layers
|
||||
// Format: {hue, saturation}
|
||||
// {0, 0} to turn off the LED
|
||||
// Add additional rows to handle more layers
|
||||
__attribute__ ((weak))
|
||||
const hs_set layer_colors[] = {
|
||||
[0] = {0, 0}, // Color for Layer 0
|
||||
[1] = {86, 255}, // Color for Layer 1
|
||||
[2] = {36, 255}, // Color for Layer 2
|
||||
[3] = {185, 255}, // Color for Layer 3
|
||||
};
|
||||
|
||||
__attribute__ ((weak))
|
||||
const size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t);
|
||||
void via_init_kb(void) {
|
||||
fled_init();
|
||||
}
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// If EEPROM config exists, load it
|
||||
if (eeprom_is_valid()) {
|
||||
fled_config fled_conf;
|
||||
fled_conf.raw = eeprom_read_byte(EEPROM_FRONTLED_ADDR);
|
||||
fled_mode = fled_conf.mode;
|
||||
fled_val = fled_conf.val * FLED_VAL_STEP;
|
||||
// Else, default config
|
||||
} else {
|
||||
fled_mode = FLED_RGB;
|
||||
fled_val = 10 * FLED_VAL_STEP;
|
||||
eeprom_update_conf(); // Store default config to EEPROM
|
||||
}
|
||||
|
||||
// Set default values for leds
|
||||
setrgb(0, 0, 0, &fleds[0]);
|
||||
setrgb(0, 0, 0, &fleds[1]);
|
||||
|
||||
// Handle lighting for indicator mode
|
||||
if (fled_mode == FLED_INDI) {
|
||||
// Enable capslock led if enabled on host
|
||||
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK))
|
||||
sethsv(FLED_CAPS_H, FLED_CAPS_S, fled_val, &fleds[0]);
|
||||
|
||||
// Determine and set colour of layer LED according to current layer
|
||||
// if hue = sat = 0, leave LED off
|
||||
uint8_t layer = biton32(layer_state);
|
||||
if (layer < lc_size && !(layer_colors[layer].hue == 0 && layer_colors[layer].hue == 0))
|
||||
sethsv(layer_colors[layer].hue, layer_colors[layer].sat, fled_val, &fleds[1]);
|
||||
}
|
||||
// If VIA is disabled, we still need to load settings
|
||||
// Call via_init_kb() the same way as via_init(), with setting
|
||||
// EEPROM valid afterwards.
|
||||
#ifndef VIA_ENABLE
|
||||
fled_init();
|
||||
via_eeprom_set_valid(true);
|
||||
#endif // VIA_ENABLE
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
|
@ -82,132 +48,35 @@ void matrix_scan_kb(void) {
|
|||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// Handle custom keycodes for front LED operation
|
||||
switch (keycode) {
|
||||
case FLED_MOD: // Change between front LED operation modes (off, indicator, RGB)
|
||||
if (record->event.pressed)
|
||||
fled_mode_cycle();
|
||||
break;
|
||||
|
||||
case FLED_VAI: // Increase the brightness of the front LEDs by FLED_VAL_STEP
|
||||
if (record->event.pressed)
|
||||
fled_val_increase();
|
||||
break;
|
||||
|
||||
case FLED_VAD: // Decrease the brightness of the front LEDs by FLED_VAL_STEP
|
||||
if (record->event.pressed)
|
||||
fled_val_decrease();
|
||||
break;
|
||||
|
||||
default:
|
||||
break; // Process all other keycodes normally
|
||||
}
|
||||
|
||||
process_record_fled(keycode, record);
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// Set indicator LED appropriately, whether it is used or not
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
sethsv(FLED_CAPS_H, FLED_CAPS_S, fled_val, &fleds[0]);
|
||||
} else {
|
||||
setrgb(0, 0, 0, &fleds[0]);
|
||||
}
|
||||
|
||||
rgblight_set();
|
||||
led_set_user(usb_led);
|
||||
bool led_update_kb(led_t led_state) {
|
||||
fled_lock_update(led_state);
|
||||
return led_update_user(led_state);
|
||||
}
|
||||
|
||||
uint32_t layer_state_set_kb(uint32_t state) {
|
||||
// Determine and set colour of layer LED according to current layer
|
||||
// if hue = sat = 0, leave LED off
|
||||
uint8_t layer = biton32(state);
|
||||
|
||||
if (layer < lc_size && !(layer_colors[layer].hue == 0 && layer_colors[layer].hue == 0))
|
||||
sethsv(layer_colors[layer].hue, layer_colors[layer].sat, fled_val, &fleds[1]);
|
||||
else
|
||||
setrgb(0, 0, 0, &fleds[1]);
|
||||
|
||||
return state;
|
||||
layer_state_t layer_state_set_kb(layer_state_t state) {
|
||||
fled_layer_update(state);
|
||||
return layer_state_set_user(state);
|
||||
}
|
||||
|
||||
// EEPROM Management
|
||||
// Fallback eeprom functions if VIA is not enabled
|
||||
#ifndef VIA_ENABLE
|
||||
|
||||
// Test if magic value is present at expected location
|
||||
bool eeprom_is_valid(void)
|
||||
// Sets VIA/keyboard level usage of EEPROM to valid/invalid
|
||||
// Keyboard level code (eg. via_init_kb()) should not call this
|
||||
void via_eeprom_set_valid(bool valid)
|
||||
{
|
||||
return (eeprom_read_word(EEPROM_MAGIC_ADDR) == EEPROM_MAGIC);
|
||||
char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
|
||||
uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3] & 0x0F );
|
||||
uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6] & 0x0F );
|
||||
uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9] & 0x0F );
|
||||
|
||||
eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0, valid ? magic0 : 0xFF);
|
||||
eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1, valid ? magic1 : 0xFF);
|
||||
eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2, valid ? magic2 : 0xFF);
|
||||
}
|
||||
|
||||
// Set magic value at expected location
|
||||
void eeprom_set_valid(bool valid)
|
||||
{
|
||||
eeprom_update_word(EEPROM_MAGIC_ADDR, valid ? EEPROM_MAGIC : 0xFFFF);
|
||||
}
|
||||
|
||||
// Store current front led config in EEPROM
|
||||
void eeprom_update_conf(void)
|
||||
{
|
||||
// Create storage struct and set values
|
||||
fled_config conf;
|
||||
conf.mode = fled_mode;
|
||||
|
||||
// Small hack to ensure max value is stored correctly
|
||||
if (fled_val == 255)
|
||||
conf.val = 256 / FLED_VAL_STEP;
|
||||
else
|
||||
conf.val = fled_val / FLED_VAL_STEP;
|
||||
|
||||
// Set magic value and store config
|
||||
eeprom_set_valid(true);
|
||||
eeprom_update_byte(EEPROM_FRONTLED_ADDR, conf.raw);
|
||||
}
|
||||
|
||||
// Custom keycode functions
|
||||
|
||||
void fled_mode_cycle(void)
|
||||
{
|
||||
// FLED -> FLED_RGB -> FLED_INDI
|
||||
switch (fled_mode) {
|
||||
case FLED_OFF:
|
||||
fled_mode = FLED_RGB;
|
||||
break;
|
||||
|
||||
case FLED_RGB:
|
||||
fled_mode = FLED_INDI;
|
||||
break;
|
||||
|
||||
case FLED_INDI:
|
||||
fled_mode = FLED_OFF;
|
||||
break;
|
||||
}
|
||||
|
||||
// Update stored config
|
||||
eeprom_update_conf();
|
||||
rgblight_set();
|
||||
}
|
||||
|
||||
void fled_val_increase(void)
|
||||
{
|
||||
// Increase val by FLED_VAL_STEP, handling the upper edge case
|
||||
if (fled_val + FLED_VAL_STEP > 255)
|
||||
fled_val = 255;
|
||||
else
|
||||
fled_val += FLED_VAL_STEP;
|
||||
|
||||
// Update stored config
|
||||
eeprom_update_conf();
|
||||
rgblight_set();
|
||||
}
|
||||
|
||||
void fled_val_decrease(void)
|
||||
{
|
||||
// Decrease val by FLED_VAL_STEP, handling the lower edge case
|
||||
if (fled_val - FLED_VAL_STEP > 255)
|
||||
fled_val = 255;
|
||||
else
|
||||
fled_val -= FLED_VAL_STEP;
|
||||
|
||||
// Update stored config
|
||||
eeprom_update_conf();
|
||||
rgblight_set();
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -13,8 +13,7 @@
|
|||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifndef MXSS_H
|
||||
#define MXSS_H
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#include "mxss_frontled.h"
|
||||
|
|
@ -204,4 +203,18 @@
|
|||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E }, \
|
||||
}
|
||||
|
||||
#endif
|
||||
// All the gubs
|
||||
#define LAYOUT_all( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
|
||||
k40, k41, k42, k43, k46, k48, k4A, k4B, k4C, k4D, k4E \
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
|
||||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E }, \
|
||||
}
|
||||
|
|
|
|||
|
|
@ -0,0 +1,264 @@
|
|||
/* Copyright 2020 Jumail Mundekkat / MxBlue
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
* Extended from the work done by fcoury: https://github.com/qmk/qmk_firmware/pull/4915
|
||||
*/
|
||||
|
||||
#include "mxss_frontled.h"
|
||||
#include "tmk_core/common/eeprom.h"
|
||||
#include "rgblight.h"
|
||||
#include "via.h"
|
||||
#include "version.h" // for QMK_BUILDDATE used in EEPROM magic
|
||||
|
||||
// Variables for controlling front LED application
|
||||
uint8_t fled_mode; // Mode for front LEDs
|
||||
uint8_t fled_val; // Brightness for front leds (0 - 255)
|
||||
LED_TYPE fleds[2]; // Front LED rgb values for indicator mode use
|
||||
|
||||
// Layer indicator colors
|
||||
__attribute__ ((weak))
|
||||
hs_set layer_colors[FRONTLED_COLOR_MAXCNT];
|
||||
|
||||
// Caps lock indicator color
|
||||
__attribute__ ((weak))
|
||||
hs_set caps_color;
|
||||
|
||||
__attribute__ ((weak))
|
||||
size_t lc_size = sizeof(layer_colors) / sizeof(hs_set);
|
||||
|
||||
void fled_init(void) {
|
||||
// If EEPROM config exists, load it
|
||||
// If VIA EEPROM exists, FLED config should too
|
||||
if (via_eeprom_is_valid()) {
|
||||
fled_load_conf();
|
||||
// Else, default config
|
||||
} else {
|
||||
// Default mode/brightness
|
||||
fled_mode = FLED_RGB;
|
||||
fled_val = 10 * FLED_VAL_STEP;
|
||||
|
||||
// Default colors
|
||||
caps_color.hue = 0;
|
||||
caps_color.sat = 255;
|
||||
layer_colors[0].hue = 0;
|
||||
layer_colors[0].sat = 0;
|
||||
layer_colors[1].hue = 86;
|
||||
layer_colors[1].sat = 255;
|
||||
layer_colors[2].hue = 36;
|
||||
layer_colors[2].sat = 255;
|
||||
layer_colors[3].hue = 185;
|
||||
layer_colors[3].sat = 255;
|
||||
|
||||
fled_update_conf(); // Store default config to EEPROM
|
||||
}
|
||||
|
||||
// Set default values for leds
|
||||
setrgb(0, 0, 0, &fleds[0]);
|
||||
setrgb(0, 0, 0, &fleds[1]);
|
||||
|
||||
// Handle lighting for indicator mode
|
||||
if (fled_mode == FLED_INDI) {
|
||||
fled_lock_update(host_keyboard_led_state());
|
||||
fled_layer_update(layer_state);
|
||||
}
|
||||
}
|
||||
|
||||
void process_record_fled(uint16_t keycode, keyrecord_t *record) {
|
||||
// Handle custom keycodes for front LED operation
|
||||
switch (keycode) {
|
||||
case FLED_MOD: // Change between front LED operation modes (off, indicator, RGB)
|
||||
if (record->event.pressed)
|
||||
fled_mode_cycle();
|
||||
break;
|
||||
|
||||
case FLED_VAI: // Increase the brightness of the front LEDs by FLED_VAL_STEP
|
||||
if (record->event.pressed)
|
||||
fled_val_increase();
|
||||
break;
|
||||
|
||||
case FLED_VAD: // Decrease the brightness of the front LEDs by FLED_VAL_STEP
|
||||
if (record->event.pressed)
|
||||
fled_val_decrease();
|
||||
break;
|
||||
|
||||
default:
|
||||
break; // Process all other keycodes normally
|
||||
}
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
void fled_load_conf(void) {
|
||||
// Load config
|
||||
fled_config fled_conf;
|
||||
fled_conf.raw = eeprom_read_byte(FRONTLED_CONF_ADDR);
|
||||
fled_mode = fled_conf.mode;
|
||||
fled_val = fled_conf.val * FLED_VAL_STEP;
|
||||
|
||||
// Load color data
|
||||
uint8_t stored_cnt = eeprom_read_byte(FRONTLED_COLOR_CNT_ADDR);
|
||||
uint16_t *color_ptr = FRONTLED_COLOR_ADDR;
|
||||
caps_color.raw = eeprom_read_word(color_ptr); // Should always store at least 1 color
|
||||
for (uint8_t i = 1; i < stored_cnt; i++) {
|
||||
if (i == lc_size) // Can't load more layers than we have available
|
||||
break;
|
||||
layer_colors[i].raw = eeprom_read_word(&color_ptr[i]);
|
||||
}
|
||||
layer_colors[0].raw = 0; // hue = sat = 0 for layer 0
|
||||
}
|
||||
|
||||
// Store current front led config in EEPROM
|
||||
void fled_update_conf(void)
|
||||
{
|
||||
// Create storage struct and set values
|
||||
fled_config conf;
|
||||
conf.mode = fled_mode;
|
||||
|
||||
// Small hack to ensure max value is stored correctly
|
||||
if (fled_val == 255)
|
||||
conf.val = 256 / FLED_VAL_STEP;
|
||||
else
|
||||
conf.val = fled_val / FLED_VAL_STEP;
|
||||
|
||||
// Store config
|
||||
eeprom_update_byte(FRONTLED_CONF_ADDR, conf.raw);
|
||||
|
||||
// Store color data
|
||||
uint16_t *color_ptr = FRONTLED_COLOR_ADDR;
|
||||
eeprom_update_word(color_ptr, caps_color.raw);
|
||||
// Start from 1, layer 0 is not modifiable and therefore not persisted
|
||||
uint8_t i = 1;
|
||||
for (; i < lc_size; i++) {
|
||||
if (i == FRONTLED_COLOR_MAXCNT) // Can't store more than the EEPROM we have available
|
||||
break;
|
||||
eeprom_update_word(&color_ptr[i], layer_colors[i].raw);
|
||||
}
|
||||
eeprom_update_byte(FRONTLED_COLOR_CNT_ADDR, i); // For safety, store the count of colors stored
|
||||
}
|
||||
|
||||
// Custom keycode functions
|
||||
|
||||
void fled_mode_cycle(void)
|
||||
{
|
||||
// FLED -> FLED_RGB -> FLED_INDI
|
||||
switch (fled_mode) {
|
||||
case FLED_OFF:
|
||||
fled_mode = FLED_RGB;
|
||||
rgblight_timer_enable();
|
||||
break;
|
||||
|
||||
case FLED_RGB:
|
||||
fled_mode = FLED_INDI;
|
||||
break;
|
||||
|
||||
case FLED_INDI:
|
||||
fled_mode = FLED_OFF;
|
||||
break;
|
||||
}
|
||||
|
||||
// Update stored config
|
||||
fled_update_conf();
|
||||
rgblight_set();
|
||||
}
|
||||
|
||||
void fled_val_increase(void)
|
||||
{
|
||||
// Increase val by FLED_VAL_STEP, handling the upper edge case
|
||||
if (fled_val + FLED_VAL_STEP > 255)
|
||||
fled_val = 255;
|
||||
else
|
||||
fled_val += FLED_VAL_STEP;
|
||||
|
||||
// Update stored config
|
||||
fled_update_conf();
|
||||
rgblight_set();
|
||||
}
|
||||
|
||||
void fled_val_decrease(void)
|
||||
{
|
||||
// Decrease val by FLED_VAL_STEP, handling the lower edge case
|
||||
if (fled_val - FLED_VAL_STEP > 255)
|
||||
fled_val = 255;
|
||||
else
|
||||
fled_val -= FLED_VAL_STEP;
|
||||
|
||||
// Update stored config
|
||||
fled_update_conf();
|
||||
rgblight_set();
|
||||
}
|
||||
|
||||
void fled_layer_update(layer_state_t state) {
|
||||
// Determine and set colour of layer LED according to current layer
|
||||
// if hue = sat = 0, leave LED off
|
||||
uint8_t layer = get_highest_layer(state);
|
||||
|
||||
if (layer < lc_size && !(layer_colors[layer].hue == 0 && layer_colors[layer].sat == 0)) {
|
||||
sethsv(layer_colors[layer].hue, layer_colors[layer].sat, fled_val, &fleds[1]);
|
||||
} else {
|
||||
setrgb(0, 0, 0, &fleds[1]);
|
||||
}
|
||||
}
|
||||
|
||||
void fled_lock_update(led_t led_state) {
|
||||
// Set indicator LED appropriately, whether it is used or not
|
||||
if (led_state.caps_lock) {
|
||||
sethsv(caps_color.hue, caps_color.sat, fled_val, &fleds[0]);
|
||||
} else {
|
||||
setrgb(0, 0, 0, &fleds[0]);
|
||||
}
|
||||
|
||||
rgblight_set();
|
||||
}
|
||||
|
||||
void set_fled_layer_color(uint8_t layer, hs_set hs) {
|
||||
// Update layer colors and refresh LEDs
|
||||
layer_colors[layer] = hs;
|
||||
fled_layer_update(layer_state);
|
||||
fled_update_conf();
|
||||
}
|
||||
|
||||
hs_set get_fled_layer_color(uint8_t layer) {
|
||||
return layer_colors[layer];
|
||||
}
|
||||
|
||||
void set_fled_caps_color(hs_set hs) {
|
||||
// Update caplock color and refresh LEDs
|
||||
caps_color = hs;
|
||||
fled_lock_update(host_keyboard_led_state());
|
||||
fled_update_conf();
|
||||
}
|
||||
|
||||
hs_set get_fled_caps_color(void) {
|
||||
return caps_color;
|
||||
}
|
||||
|
||||
// Fallback eeprom functions if VIA is not enabled
|
||||
#ifndef VIA_ENABLE
|
||||
|
||||
// Can be called in an overriding via_init_kb() to test if keyboard level code usage of
|
||||
// EEPROM is invalid and use/save defaults.
|
||||
bool via_eeprom_is_valid(void)
|
||||
{
|
||||
char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
|
||||
uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3] & 0x0F );
|
||||
uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6] & 0x0F );
|
||||
uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9] & 0x0F );
|
||||
|
||||
return (eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0 ) == magic0 &&
|
||||
eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1 ) == magic1 &&
|
||||
eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2 ) == magic2 );
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
/* Copyright 2018 Jumail Mundekkat / MxBlue
|
||||
/* Copyright 2020 Jumail Mundekkat / MxBlue
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
|
@ -16,11 +16,12 @@
|
|||
|
||||
// EEPROM management code taken from Wilba6582
|
||||
// https://github.com/Wilba6582/qmk_firmware/blob/zeal60/keyboards/zeal60/zeal_eeprom.h
|
||||
|
||||
#ifndef MXSS_FRONTLED_H
|
||||
#define MXSS_FRONTLED_H
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#include "quantum_keycodes.h"
|
||||
#include "via.h"
|
||||
|
||||
// RGBLED index for front LEDs
|
||||
#define RGBLIGHT_FLED1 14
|
||||
|
|
@ -29,13 +30,13 @@
|
|||
// Brightness increase step for front LEDs
|
||||
#define FLED_VAL_STEP 8
|
||||
|
||||
// QMK never uses more then 32bytes of EEPROM, so our region starts there
|
||||
// Magic value to verify the state of the EEPROM
|
||||
#define EEPROM_MAGIC 0xC3E7
|
||||
#define EEPROM_MAGIC_ADDR ((void*)32)
|
||||
|
||||
// Front LED settings
|
||||
#define EEPROM_FRONTLED_ADDR ((void*)34)
|
||||
#define FRONTLED_CONF_ADDR ((uint8_t*) VIA_EEPROM_CUSTOM_CONFIG_ADDR)
|
||||
#define FRONTLED_COLOR_CNT_ADDR (FRONTLED_CONF_ADDR + 1)
|
||||
#define FRONTLED_COLOR_ADDR ((uint16_t*)(FRONTLED_COLOR_CNT_ADDR + 1))
|
||||
|
||||
// No point persisting more 4, VIA only allows editing of 3 + 1 for caps
|
||||
#define FRONTLED_COLOR_MAXCNT 4
|
||||
|
||||
// Modes for front LEDs
|
||||
#define FLED_OFF 0b00
|
||||
|
|
@ -43,10 +44,6 @@
|
|||
#define FLED_RGB 0b10
|
||||
#define FLED_UNDEF 0b11
|
||||
|
||||
// Hard-coded color for capslock indicator in FLED_INDI mode, H:0% S:100% = Red
|
||||
#define FLED_CAPS_H 0
|
||||
#define FLED_CAPS_S 255
|
||||
|
||||
// Config storage format for EEPROM
|
||||
typedef union {
|
||||
uint8_t raw;
|
||||
|
|
@ -57,25 +54,35 @@ typedef union {
|
|||
} fled_config;
|
||||
|
||||
// Structure to store hue and saturation values
|
||||
typedef struct _hs_set {
|
||||
uint16_t hue;
|
||||
uint8_t sat;
|
||||
typedef union {
|
||||
uint16_t raw;
|
||||
struct {
|
||||
uint8_t hue;
|
||||
uint8_t sat;
|
||||
};
|
||||
} hs_set;
|
||||
|
||||
// Custom keycodes for front LED control
|
||||
enum fled_keycodes {
|
||||
FLED_MOD = SAFE_RANGE,
|
||||
FLED_VAI,
|
||||
FLED_VAD,
|
||||
NEW_SAFE_RANGE // define a new safe range
|
||||
FLED_MOD = USER00, // USER00 = VIA custom keycode start
|
||||
FLED_VAI,
|
||||
FLED_VAD,
|
||||
NEW_SAFE_RANGE // define a new safe range
|
||||
};
|
||||
|
||||
bool eeprom_is_valid(void); // Check if EEPROM has been set up
|
||||
void eeprom_set_valid(bool valid); // Change validity state of EEPROM
|
||||
void eeprom_update_conf(void); // Store current front LED config to EEPROM
|
||||
void fled_init(void); // Run init functions for front LEDs
|
||||
void process_record_fled(uint16_t keycode, keyrecord_t* record); // Process keycodes for front LEDs
|
||||
void fled_load_conf(void); // Load front LED config from EEPROM
|
||||
void fled_update_conf(void); // Store current front LED config to EEPROM
|
||||
|
||||
void fled_mode_cycle(void); // Cycle between the 3 modes for the front LEDs
|
||||
void fled_val_increase(void); // Increase the brightness of the front LEDs
|
||||
void fled_val_decrease(void); // Decrease the brightness of the front LEDs
|
||||
|
||||
#endif //MXSS_FRONTLED_H
|
||||
void fled_layer_update(layer_state_t state); // Process layer update for front LEDs
|
||||
void fled_lock_update(led_t led_state); // Process lock update for front LEDs
|
||||
|
||||
void set_fled_layer_color(uint8_t layer, hs_set hs); // Set color for a given layer
|
||||
void set_fled_caps_color(hs_set hs); // Set color for the capslock indicator
|
||||
hs_set get_fled_caps_color(void); // Get color for the capslock indicator
|
||||
hs_set get_fled_layer_color(uint8_t layer); // Get color for a given layer
|
||||
|
|
|
|||
|
|
@ -2,6 +2,11 @@
|
|||
|
||||
|
||||
|
||||
### Important Note:
|
||||
**This PCB supports the VIA configurator, and this is the recommended way to configure the keymap on this keyboard. Building the firmware should only be necessary if you would like to change the colours of the front LEDs in indicator mode.**
|
||||
|
||||
**For more information about the VIA configurator, [see here](https://caniusevia.com/).**
|
||||
|
||||
### Information:
|
||||
|
||||
- Case: Frosted Polycarbonate, CNC milled
|
||||
|
|
@ -51,4 +56,4 @@ Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock
|
|||
|
||||
# Further Notes
|
||||
|
||||
As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example.
|
||||
As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example.
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -16,137 +16,245 @@
|
|||
#ifndef RGBLIGHT_H
|
||||
#define RGBLIGHT_H
|
||||
|
||||
#ifdef RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_MODES 35
|
||||
#else
|
||||
#define RGBLIGHT_MODES 1
|
||||
#endif
|
||||
#include "rgblight_reconfig.h"
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_BREATHE_CENTER
|
||||
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1-2.7
|
||||
#endif
|
||||
/***** rgblight_mode(mode)/rgblight_mode_noeeprom(mode) ****
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_BREATHE_MAX
|
||||
#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0-255
|
||||
#endif
|
||||
old mode number (before 0.6.117) to new mode name table
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_SNAKE_LENGTH
|
||||
#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4
|
||||
#endif
|
||||
|-----------------|-----------------------------------|
|
||||
| old mode number | new mode name |
|
||||
|-----------------|-----------------------------------|
|
||||
| 1 | RGBLIGHT_MODE_STATIC_LIGHT |
|
||||
| 2 | RGBLIGHT_MODE_BREATHING |
|
||||
| 3 | RGBLIGHT_MODE_BREATHING + 1 |
|
||||
| 4 | RGBLIGHT_MODE_BREATHING + 2 |
|
||||
| 5 | RGBLIGHT_MODE_BREATHING + 3 |
|
||||
| 6 | RGBLIGHT_MODE_RAINBOW_MOOD |
|
||||
| 7 | RGBLIGHT_MODE_RAINBOW_MOOD + 1 |
|
||||
| 8 | RGBLIGHT_MODE_RAINBOW_MOOD + 2 |
|
||||
| 9 | RGBLIGHT_MODE_RAINBOW_SWIRL |
|
||||
| 10 | RGBLIGHT_MODE_RAINBOW_SWIRL + 1 |
|
||||
| 11 | RGBLIGHT_MODE_RAINBOW_SWIRL + 2 |
|
||||
| 12 | RGBLIGHT_MODE_RAINBOW_SWIRL + 3 |
|
||||
| 13 | RGBLIGHT_MODE_RAINBOW_SWIRL + 4 |
|
||||
| 14 | RGBLIGHT_MODE_RAINBOW_SWIRL + 5 |
|
||||
| 15 | RGBLIGHT_MODE_SNAKE |
|
||||
| 16 | RGBLIGHT_MODE_SNAKE + 1 |
|
||||
| 17 | RGBLIGHT_MODE_SNAKE + 2 |
|
||||
| 18 | RGBLIGHT_MODE_SNAKE + 3 |
|
||||
| 19 | RGBLIGHT_MODE_SNAKE + 4 |
|
||||
| 20 | RGBLIGHT_MODE_SNAKE + 5 |
|
||||
| 21 | RGBLIGHT_MODE_KNIGHT |
|
||||
| 22 | RGBLIGHT_MODE_KNIGHT + 1 |
|
||||
| 23 | RGBLIGHT_MODE_KNIGHT + 2 |
|
||||
| 24 | RGBLIGHT_MODE_CHRISTMAS |
|
||||
| 25 | RGBLIGHT_MODE_STATIC_GRADIENT |
|
||||
| 26 | RGBLIGHT_MODE_STATIC_GRADIENT + 1 |
|
||||
| 27 | RGBLIGHT_MODE_STATIC_GRADIENT + 2 |
|
||||
| 28 | RGBLIGHT_MODE_STATIC_GRADIENT + 3 |
|
||||
| 29 | RGBLIGHT_MODE_STATIC_GRADIENT + 4 |
|
||||
| 30 | RGBLIGHT_MODE_STATIC_GRADIENT + 5 |
|
||||
| 31 | RGBLIGHT_MODE_STATIC_GRADIENT + 6 |
|
||||
| 32 | RGBLIGHT_MODE_STATIC_GRADIENT + 7 |
|
||||
| 33 | RGBLIGHT_MODE_STATIC_GRADIENT + 8 |
|
||||
| 34 | RGBLIGHT_MODE_STATIC_GRADIENT + 9 |
|
||||
| 35 | RGBLIGHT_MODE_RGB_TEST |
|
||||
| 36 | RGBLIGHT_MODE_ALTERNATING |
|
||||
|-----------------|-----------------------------------|
|
||||
*****/
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_KNIGHT_LENGTH
|
||||
#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 3
|
||||
#endif
|
||||
#define _RGBM_SINGLE_STATIC(sym) RGBLIGHT_MODE_##sym,
|
||||
#define _RGBM_SINGLE_DYNAMIC(sym) RGBLIGHT_MODE_##sym,
|
||||
#define _RGBM_MULTI_STATIC(sym) RGBLIGHT_MODE_##sym,
|
||||
#define _RGBM_MULTI_DYNAMIC(sym) RGBLIGHT_MODE_##sym,
|
||||
#define _RGBM_TMP_STATIC(sym, msym) RGBLIGHT_MODE_##sym,
|
||||
#define _RGBM_TMP_DYNAMIC(sym, msym) RGBLIGHT_MODE_##sym,
|
||||
enum RGBLIGHT_EFFECT_MODE {
|
||||
RGBLIGHT_MODE_zero = 0,
|
||||
#include "rgblight_modes.h"
|
||||
RGBLIGHT_MODE_last
|
||||
};
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_KNIGHT_OFFSET
|
||||
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 0
|
||||
#endif
|
||||
#ifndef RGBLIGHT_H_DUMMY_DEFINE
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_KNIGHT_LED_NUM
|
||||
#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM RGBLED_NUM
|
||||
#endif
|
||||
# define RGBLIGHT_MODES (RGBLIGHT_MODE_last - 1)
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL
|
||||
#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 1000
|
||||
#endif
|
||||
// sample: #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85
|
||||
|
||||
#ifndef RGBLIGHT_EFFECT_CHRISTMAS_STEP
|
||||
#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 2
|
||||
#endif
|
||||
# ifndef RGBLIGHT_EFFECT_BREATHE_MAX
|
||||
# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0-255
|
||||
# endif
|
||||
|
||||
#ifndef RGBLIGHT_HUE_STEP
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#endif
|
||||
#ifndef RGBLIGHT_SAT_STEP
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#endif
|
||||
#ifndef RGBLIGHT_VAL_STEP
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
#endif
|
||||
# ifndef RGBLIGHT_EFFECT_SNAKE_LENGTH
|
||||
# define RGBLIGHT_EFFECT_SNAKE_LENGTH 4
|
||||
# endif
|
||||
|
||||
#define RGBLED_TIMER_TOP F_CPU/(256*64)
|
||||
# ifndef RGBLIGHT_EFFECT_KNIGHT_LENGTH
|
||||
# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 3
|
||||
# endif
|
||||
|
||||
# ifndef RGBLIGHT_EFFECT_KNIGHT_OFFSET
|
||||
# define RGBLIGHT_EFFECT_KNIGHT_OFFSET 0
|
||||
# endif
|
||||
|
||||
# ifndef RGBLIGHT_EFFECT_KNIGHT_LED_NUM
|
||||
# define RGBLIGHT_EFFECT_KNIGHT_LED_NUM (effect_num_leds)
|
||||
# endif
|
||||
|
||||
# ifndef RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL
|
||||
# define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 1000
|
||||
# endif
|
||||
|
||||
# ifndef RGBLIGHT_EFFECT_CHRISTMAS_STEP
|
||||
# define RGBLIGHT_EFFECT_CHRISTMAS_STEP 2
|
||||
# endif
|
||||
|
||||
# ifndef RGBLIGHT_HUE_STEP
|
||||
# define RGBLIGHT_HUE_STEP 8
|
||||
# endif
|
||||
# ifndef RGBLIGHT_SAT_STEP
|
||||
# define RGBLIGHT_SAT_STEP 17
|
||||
# endif
|
||||
# ifndef RGBLIGHT_VAL_STEP
|
||||
# define RGBLIGHT_VAL_STEP 17
|
||||
# endif
|
||||
# ifndef RGBLIGHT_LIMIT_VAL
|
||||
# define RGBLIGHT_LIMIT_VAL 255
|
||||
# endif
|
||||
|
||||
# define RGBLED_TIMER_TOP F_CPU / (256 * 64)
|
||||
// #define RGBLED_TIMER_TOP 0xFF10
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include "eeconfig.h"
|
||||
#ifndef RGBLIGHT_CUSTOM_DRIVER
|
||||
#include "ws2812.h"
|
||||
#endif
|
||||
#include "color.h"
|
||||
#include "rgblight_list.h"
|
||||
# include <stdint.h>
|
||||
# include <stdbool.h>
|
||||
# include "eeconfig.h"
|
||||
# ifndef RGBLIGHT_CUSTOM_DRIVER
|
||||
# include "ws2812.h"
|
||||
# endif
|
||||
# include "color.h"
|
||||
# include "rgblight_list.h"
|
||||
|
||||
# if defined(__AVR__)
|
||||
# include <avr/pgmspace.h>
|
||||
# endif
|
||||
|
||||
extern LED_TYPE led[RGBLED_NUM];
|
||||
|
||||
extern const uint8_t RGBLED_BREATHING_INTERVALS[4] PROGMEM;
|
||||
extern const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[3] PROGMEM;
|
||||
extern const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[3] PROGMEM;
|
||||
extern const uint8_t RGBLED_SNAKE_INTERVALS[3] PROGMEM;
|
||||
extern const uint8_t RGBLED_KNIGHT_INTERVALS[3] PROGMEM;
|
||||
extern const uint8_t RGBLED_BREATHING_INTERVALS[4] PROGMEM;
|
||||
extern const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[3] PROGMEM;
|
||||
extern const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[3] PROGMEM;
|
||||
extern const uint8_t RGBLED_SNAKE_INTERVALS[3] PROGMEM;
|
||||
extern const uint8_t RGBLED_KNIGHT_INTERVALS[3] PROGMEM;
|
||||
extern const uint16_t RGBLED_RGBTEST_INTERVALS[1] PROGMEM;
|
||||
extern bool is_rgblight_initialized;
|
||||
|
||||
// Should stay in sycn with rgb matrix config as we reuse eeprom storage for both (for now)
|
||||
typedef union {
|
||||
uint32_t raw;
|
||||
struct {
|
||||
bool enable :1;
|
||||
uint8_t mode :6;
|
||||
uint16_t hue :9;
|
||||
uint8_t sat :8;
|
||||
uint8_t val :8;
|
||||
uint8_t speed :8;//EECONFIG needs to be increased to support this
|
||||
};
|
||||
uint32_t raw;
|
||||
struct {
|
||||
bool enable : 1;
|
||||
uint8_t mode : 7;
|
||||
uint8_t hue : 8;
|
||||
uint8_t sat : 8;
|
||||
uint8_t val : 8;
|
||||
uint8_t speed : 8; // EECONFIG needs to be increased to support this
|
||||
};
|
||||
} rgblight_config_t;
|
||||
|
||||
void rgblight_init(void);
|
||||
typedef struct _rgblight_status_t {
|
||||
uint8_t base_mode;
|
||||
bool timer_enabled;
|
||||
# ifdef RGBLIGHT_SPLIT
|
||||
uint8_t change_flags;
|
||||
# endif
|
||||
} rgblight_status_t;
|
||||
|
||||
/* === Utility Functions ===*/
|
||||
void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1);
|
||||
void sethsv_raw(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); // without RGBLIGHT_LIMIT_VAL check
|
||||
void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1);
|
||||
|
||||
/* === Low level Functions === */
|
||||
void rgblight_set(void);
|
||||
void rgblight_set_clipping_range(uint8_t start_pos, uint8_t num_leds);
|
||||
|
||||
/* === Effects and Animations Functions === */
|
||||
/* effect range setting */
|
||||
void rgblight_set_effect_range(uint8_t start_pos, uint8_t num_leds);
|
||||
|
||||
/* direct operation */
|
||||
void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index);
|
||||
void rgblight_sethsv_at(uint8_t hue, uint8_t sat, uint8_t val, uint8_t index);
|
||||
void rgblight_setrgb_range(uint8_t r, uint8_t g, uint8_t b, uint8_t start, uint8_t end);
|
||||
void rgblight_sethsv_range(uint8_t hue, uint8_t sat, uint8_t val, uint8_t start, uint8_t end);
|
||||
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
|
||||
|
||||
# ifndef RGBLIGHT_SPLIT
|
||||
void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b);
|
||||
void rgblight_setrgb_slave(uint8_t r, uint8_t g, uint8_t b);
|
||||
void rgblight_sethsv_master(uint8_t hue, uint8_t sat, uint8_t val);
|
||||
void rgblight_sethsv_slave(uint8_t hue, uint8_t sat, uint8_t val);
|
||||
# endif
|
||||
|
||||
/* effect mode change */
|
||||
void rgblight_mode(uint8_t mode);
|
||||
void rgblight_mode_noeeprom(uint8_t mode);
|
||||
void rgblight_increase(void);
|
||||
void rgblight_decrease(void);
|
||||
void rgblight_toggle(void);
|
||||
void rgblight_enable(void);
|
||||
void rgblight_disable(void);
|
||||
void rgblight_step(void);
|
||||
void rgblight_step_noeeprom(void);
|
||||
void rgblight_step_reverse(void);
|
||||
uint8_t rgblight_get_mode(void);
|
||||
void rgblight_mode(uint8_t mode);
|
||||
void rgblight_set(void);
|
||||
void rgblight_update_dword(uint32_t dword);
|
||||
void rgblight_step_reverse_noeeprom(void);
|
||||
|
||||
/* effects mode disable/enable */
|
||||
void rgblight_toggle(void);
|
||||
void rgblight_toggle_noeeprom(void);
|
||||
void rgblight_enable(void);
|
||||
void rgblight_enable_noeeprom(void);
|
||||
void rgblight_disable(void);
|
||||
void rgblight_disable_noeeprom(void);
|
||||
|
||||
/* hue, sat, val change */
|
||||
void rgblight_increase_hue(void);
|
||||
void rgblight_increase_hue_noeeprom(void);
|
||||
void rgblight_decrease_hue(void);
|
||||
void rgblight_decrease_hue_noeeprom(void);
|
||||
void rgblight_increase_sat(void);
|
||||
void rgblight_increase_sat_noeeprom(void);
|
||||
void rgblight_decrease_sat(void);
|
||||
void rgblight_decrease_sat_noeeprom(void);
|
||||
void rgblight_increase_val(void);
|
||||
void rgblight_increase_val_noeeprom(void);
|
||||
void rgblight_decrease_val(void);
|
||||
void rgblight_decrease_val_noeeprom(void);
|
||||
void rgblight_increase_speed(void);
|
||||
void rgblight_decrease_speed(void);
|
||||
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val);
|
||||
uint16_t rgblight_get_hue(void);
|
||||
void rgblight_sethsv(uint8_t hue, uint8_t sat, uint8_t val);
|
||||
void rgblight_sethsv_noeeprom(uint8_t hue, uint8_t sat, uint8_t val);
|
||||
|
||||
/* query */
|
||||
uint8_t rgblight_get_mode(void);
|
||||
uint8_t rgblight_get_hue(void);
|
||||
uint8_t rgblight_get_sat(void);
|
||||
uint8_t rgblight_get_val(void);
|
||||
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
|
||||
void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index);
|
||||
void rgblight_sethsv_at(uint16_t hue, uint8_t sat, uint8_t val, uint8_t index);
|
||||
|
||||
/* === qmk_firmware (core)internal Functions === */
|
||||
void rgblight_init(void);
|
||||
uint32_t rgblight_read_dword(void);
|
||||
void rgblight_update_dword(uint32_t dword);
|
||||
uint32_t eeconfig_read_rgblight(void);
|
||||
void eeconfig_update_rgblight(uint32_t val);
|
||||
void eeconfig_update_rgblight_default(void);
|
||||
void eeconfig_debug_rgblight(void);
|
||||
void eeconfig_update_rgblight(uint32_t val);
|
||||
void eeconfig_update_rgblight_default(void);
|
||||
void eeconfig_debug_rgblight(void);
|
||||
|
||||
void rgb_matrix_increase(void);
|
||||
void rgb_matrix_decrease(void);
|
||||
|
||||
void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1);
|
||||
void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1);
|
||||
|
||||
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val);
|
||||
void rgblight_mode_noeeprom(uint8_t mode);
|
||||
void rgblight_toggle_noeeprom(void);
|
||||
void rgblight_enable_noeeprom(void);
|
||||
void rgblight_disable_noeeprom(void);
|
||||
|
||||
void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom);
|
||||
void rgblight_sethsv_eeprom_helper(uint8_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom);
|
||||
void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom);
|
||||
|
||||
|
||||
#define EZ_RGB(val) rgblight_show_solid_color((val >> 16) & 0xFF, (val >> 8) & 0xFF, val & 0xFF)
|
||||
# define EZ_RGB(val) rgblight_show_solid_color((val >> 16) & 0xFF, (val >> 8) & 0xFF, val & 0xFF)
|
||||
void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b);
|
||||
|
||||
void rgblight_task(void);
|
||||
|
|
@ -155,12 +263,52 @@ void rgblight_timer_init(void);
|
|||
void rgblight_timer_enable(void);
|
||||
void rgblight_timer_disable(void);
|
||||
void rgblight_timer_toggle(void);
|
||||
void rgblight_effect_breathing(uint8_t interval);
|
||||
void rgblight_effect_rainbow_mood(uint8_t interval);
|
||||
void rgblight_effect_rainbow_swirl(uint8_t interval);
|
||||
void rgblight_effect_snake(uint8_t interval);
|
||||
void rgblight_effect_knight(uint8_t interval);
|
||||
void rgblight_effect_christmas(void);
|
||||
void rgblight_effect_rgbtest(void);
|
||||
|
||||
#endif
|
||||
# ifdef RGBLIGHT_SPLIT
|
||||
# define RGBLIGHT_STATUS_CHANGE_MODE (1 << 0)
|
||||
# define RGBLIGHT_STATUS_CHANGE_HSVS (1 << 1)
|
||||
# define RGBLIGHT_STATUS_CHANGE_TIMER (1 << 2)
|
||||
# define RGBLIGHT_STATUS_ANIMATION_TICK (1 << 3)
|
||||
|
||||
typedef struct _rgblight_syncinfo_t {
|
||||
rgblight_config_t config;
|
||||
rgblight_status_t status;
|
||||
} rgblight_syncinfo_t;
|
||||
|
||||
/* for split keyboard master side */
|
||||
uint8_t rgblight_get_change_flags(void);
|
||||
void rgblight_clear_change_flags(void);
|
||||
void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo);
|
||||
/* for split keyboard slave side */
|
||||
void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom);
|
||||
# endif
|
||||
|
||||
# ifdef RGBLIGHT_USE_TIMER
|
||||
|
||||
typedef struct _animation_status_t {
|
||||
uint16_t last_timer;
|
||||
uint8_t delta; /* mode - base_mode */
|
||||
bool restart;
|
||||
union {
|
||||
uint16_t pos16;
|
||||
uint8_t pos;
|
||||
int8_t current_hue;
|
||||
uint16_t current_offset;
|
||||
};
|
||||
} animation_status_t;
|
||||
|
||||
extern animation_status_t animation_status;
|
||||
|
||||
void rgblight_effect_breathing(animation_status_t *anim);
|
||||
void rgblight_effect_rainbow_mood(animation_status_t *anim);
|
||||
void rgblight_effect_rainbow_swirl(animation_status_t *anim);
|
||||
void rgblight_effect_snake(animation_status_t *anim);
|
||||
void rgblight_effect_knight(animation_status_t *anim);
|
||||
void rgblight_effect_christmas(animation_status_t *anim);
|
||||
void rgblight_effect_rgbtest(animation_status_t *anim);
|
||||
void rgblight_effect_alternating(animation_status_t *anim);
|
||||
|
||||
# endif
|
||||
|
||||
#endif // #ifndef RGBLIGHT_H_DUMMY_DEFINE
|
||||
#endif // RGBLIGHT_H
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu
|
|||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
|
|
@ -30,10 +30,12 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
|
||||
SRC += mxss_frontled.c
|
||||
|
||||
# Remove the common RGB light code and use my iteration instead
|
||||
OPT_DEFS += -DRGBLIGHT_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/process_keycode/process_rgb.c
|
||||
SRC += rgblight.c
|
||||
SRC += color.c
|
||||
SRC += ws2812.c
|
||||
CIE1931_CURVE = yes
|
||||
LED_BREATHING_TABLE = yes
|
||||
|
|
|
|||
|
|
@ -14,23 +14,24 @@
|
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "mxss_frontled.h"
|
||||
|
||||
// Predefined colors for layers
|
||||
hs_set caps_color = { .hue = 0, .sat = 255 };
|
||||
|
||||
// Colors for layers
|
||||
// Format: {hue, saturation}
|
||||
// {0, 0} to turn off the LED
|
||||
// Add additional rows to handle more layers
|
||||
hs_set layer_colors[] = {
|
||||
[0] = {0, 0}, // Color for Layer 0
|
||||
[1] = {86, 255}, // Color for Layer 1
|
||||
[2] = {36, 255}, // Color for Layer 2
|
||||
[3] = {185, 255}, // Color for Layer 3
|
||||
hs_set layer_colors[4] = {
|
||||
[0] = {.hue = 0, .sat = 0}, // Color for Layer 0
|
||||
[1] = {.hue = 86, .sat = 255}, // Color for Layer 1
|
||||
[2] = {.hue = 36, .sat = 255}, // Color for Layer 2
|
||||
[3] = {.hue = 185, .sat = 255}, // Color for Layer 3
|
||||
};
|
||||
const size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t);
|
||||
size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t);
|
||||
|
||||
// Use NEW_SAFE_RANGE to define new custom keycodes in order to not overwrite the ones used for front LED control
|
||||
enum custom_keycodes {
|
||||
MY_KEYCODE = NEW_SAFE_RANGE,
|
||||
MY_KEYCODE = NEW_SAFE_RANGE,
|
||||
};
|
||||
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue