Add support for using ranges for RGB (#4981)
* Add support for using ranges for RGB This patch adds support for controlling continuous ranges of RGB LEDs. Helper functions for split boards are also available. * RGB Range: Use hardware-platform agnostic waitdaktil_manuform
Erovia
MechMerlin
parent
f3bdd436a3
commit
642f6cf14f
|
|
@ -148,37 +148,43 @@ const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
|
|||
|
||||
If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include:
|
||||
|
||||
|Function |Description |
|
||||
|-----------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
||||
|`rgblight_enable()` |Turn LEDs on, based on their previous state |
|
||||
|`rgblight_enable_noeeprom()` |Turn LEDs on, based on their previous state (not written to EEPROM) |
|
||||
|`rgblight_disable()` |Turn LEDs off |
|
||||
|`rgblight_disable_noeeprom()` |Turn LEDs off (not written to EEPROM) |
|
||||
|`rgblight_mode(x)` |Set the mode, if RGB animations are enabled |
|
||||
|`rgblight_mode_noeeprom(x)` |Set the mode, if RGB animations are enabled (not written to EEPROM) |
|
||||
|`rgblight_setrgb(r, g, b)` |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
|
||||
|`rgblight_setrgb_at(r, g, b, led)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM) |
|
||||
|`rgblight_sethsv(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 |
|
||||
|`rgblight_sethsv_noeeprom(h, s, v)`|Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM) |
|
||||
|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
|
||||
|`rgblight_toggle()` |Toggle all LEDs between on and off |
|
||||
|`rgblight_toggle_noeeprom()` |Toggle all LEDs between on and off (not written to EEPROM) |
|
||||
|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations |
|
||||
|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) |
|
||||
|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations |
|
||||
|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) |
|
||||
|`rgblight_increase_hue()` |Increase the hue for all LEDs. This wraps around at maximum hue |
|
||||
|`rgblight_increase_hue_noeeprom()` |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM) |
|
||||
|`rgblight_decrease_hue()` |Decrease the hue for all LEDs. This wraps around at minimum hue |
|
||||
|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM) |
|
||||
|`rgblight_increase_sat()` |Increase the saturation for all LEDs. This wraps around at maximum saturation |
|
||||
|`rgblight_increase_sat_noeeprom()` |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM) |
|
||||
|`rgblight_decrease_sat()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation |
|
||||
|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM) |
|
||||
|`rgblight_increase_val()` |Increase the value for all LEDs. This wraps around at maximum value |
|
||||
|`rgblight_increase_val_noeeprom()` |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM) |
|
||||
|`rgblight_decrease_val()` |Decrease the value for all LEDs. This wraps around at minimum value |
|
||||
|`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM) |
|
||||
|Function |Description |
|
||||
|--------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
||||
|`rgblight_enable()` |Turn LEDs on, based on their previous state |
|
||||
|`rgblight_enable_noeeprom()` |Turn LEDs on, based on their previous state (not written to EEPROM) |
|
||||
|`rgblight_disable()` |Turn LEDs off |
|
||||
|`rgblight_disable_noeeprom()` |Turn LEDs off (not written to EEPROM) |
|
||||
|`rgblight_mode(x)` |Set the mode, if RGB animations are enabled |
|
||||
|`rgblight_mode_noeeprom(x)` |Set the mode, if RGB animations are enabled (not written to EEPROM) |
|
||||
|`rgblight_setrgb(r, g, b)` |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
|
||||
|`rgblight_setrgb_at(r, g, b, led)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM) |
|
||||
|`rgblight_setrgb_range(r, g, b, start, end)`|Set a continuous range of LEDs to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
|
||||
|`rgblight_setrgb_master(r, g, b)` |Set the LEDs on the master side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
|
||||
|`rgblight_setrgb_slave(r, g, b)` |Set the LEDs on the slave side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
|
||||
|`rgblight_sethsv(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 |
|
||||
|`rgblight_sethsv_noeeprom(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM) |
|
||||
|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
|
||||
|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
|
||||
|`rgblight_sethsv_master(h, s, v)` |Set the LEDs on the master side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM) |
|
||||
|`rgblight_sethsv_slave(h, s, v)` |Set the LEDs on the slave side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM) |
|
||||
|`rgblight_toggle()` |Toggle all LEDs between on and off |
|
||||
|`rgblight_toggle_noeeprom()` |Toggle all LEDs between on and off (not written to EEPROM) |
|
||||
|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations |
|
||||
|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) |
|
||||
|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations |
|
||||
|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) |
|
||||
|`rgblight_increase_hue()` |Increase the hue for all LEDs. This wraps around at maximum hue |
|
||||
|`rgblight_increase_hue_noeeprom()` |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM) |
|
||||
|`rgblight_decrease_hue()` |Decrease the hue for all LEDs. This wraps around at minimum hue |
|
||||
|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM) |
|
||||
|`rgblight_increase_sat()` |Increase the saturation for all LEDs. This wraps around at maximum saturation |
|
||||
|`rgblight_increase_sat_noeeprom()` |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM) |
|
||||
|`rgblight_decrease_sat()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation |
|
||||
|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM) |
|
||||
|`rgblight_increase_val()` |Increase the value for all LEDs. This wraps around at maximum value |
|
||||
|`rgblight_increase_val_noeeprom()` |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM) |
|
||||
|`rgblight_decrease_val()` |Decrease the value for all LEDs. This wraps around at minimum value |
|
||||
|`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM) |
|
||||
|
||||
Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h) defines several predefined shortcuts for various colors. Feel free to add to this list!
|
||||
|
||||
|
|
|
|||
|
|
@ -611,6 +611,42 @@ void rgblight_sethsv_at(uint16_t hue, uint8_t sat, uint8_t val, uint8_t index) {
|
|||
rgblight_setrgb_at(tmp_led.r, tmp_led.g, tmp_led.b, index);
|
||||
}
|
||||
|
||||
void rgblight_setrgb_range(uint8_t r, uint8_t g, uint8_t b, uint8_t start, uint8_t end) {
|
||||
if (!rgblight_config.enable || start < 0 || start >= end || end > RGBLED_NUM) { return; }
|
||||
|
||||
for (uint8_t i = start; i < end; i++) {
|
||||
led[i].r = r;
|
||||
led[i].g = g;
|
||||
led[i].b = b;
|
||||
}
|
||||
rgblight_set();
|
||||
wait_ms(1);
|
||||
}
|
||||
|
||||
void rgblight_sethsv_range(uint16_t hue, uint8_t sat, uint8_t val, uint8_t start, uint8_t end) {
|
||||
if (!rgblight_config.enable) { return; }
|
||||
|
||||
LED_TYPE tmp_led;
|
||||
sethsv(hue, sat, val, &tmp_led);
|
||||
rgblight_setrgb_range(tmp_led.r, tmp_led.g, tmp_led.b, start, end);
|
||||
}
|
||||
|
||||
void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b) {
|
||||
rgblight_setrgb_range(r, g, b, 0 , (uint8_t) RGBLED_NUM/2);
|
||||
}
|
||||
|
||||
void rgblight_setrgb_slave(uint8_t r, uint8_t g, uint8_t b) {
|
||||
rgblight_setrgb_range(r, g, b, (uint8_t) RGBLED_NUM/2, (uint8_t) RGBLED_NUM);
|
||||
}
|
||||
|
||||
void rgblight_sethsv_master(uint16_t hue, uint8_t sat, uint8_t val) {
|
||||
rgblight_sethsv_range(hue, sat, val, 0, (uint8_t) RGBLED_NUM/2);
|
||||
}
|
||||
|
||||
void rgblight_sethsv_slave(uint16_t hue, uint8_t sat, uint8_t val) {
|
||||
rgblight_sethsv_range(hue, sat, val, (uint8_t) RGBLED_NUM/2, (uint8_t) RGBLED_NUM);
|
||||
}
|
||||
|
||||
#ifndef RGBLIGHT_CUSTOM_DRIVER
|
||||
void rgblight_set(void) {
|
||||
if (rgblight_config.enable) {
|
||||
|
|
|
|||
|
|
@ -187,6 +187,12 @@ uint8_t rgblight_get_val(void);
|
|||
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
|
||||
void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index);
|
||||
void rgblight_sethsv_at(uint16_t hue, uint8_t sat, uint8_t val, uint8_t index);
|
||||
void rgblight_setrgb_range(uint8_t r, uint8_t g, uint8_t b, uint8_t start, uint8_t end);
|
||||
void rgblight_sethsv_range(uint16_t hue, uint8_t sat, uint8_t val, uint8_t start, uint8_t end);
|
||||
void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b);
|
||||
void rgblight_setrgb_slave(uint8_t r, uint8_t g, uint8_t b);
|
||||
void rgblight_sethsv_master(uint16_t hue, uint8_t sat, uint8_t val);
|
||||
void rgblight_sethsv_slave(uint16_t hue, uint8_t sat, uint8_t val);
|
||||
|
||||
uint32_t eeconfig_read_rgblight(void);
|
||||
void eeconfig_update_rgblight(uint32_t val);
|
||||
|
|
|
|||
Loading…
Reference in New Issue