Refactor satt/comet46 to use core OLED driver (#17856)
Joel Challis
GitHub
parent
baf34989f1
commit
409790457c
|
|
@ -1,162 +0,0 @@
|
|||
#include <util/twi.h>
|
||||
#include <avr/io.h>
|
||||
#include <stdlib.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/twi.h>
|
||||
#include <stdbool.h>
|
||||
#include "i2c.h"
|
||||
|
||||
#ifdef USE_I2C
|
||||
|
||||
// Limits the amount of we wait for any one i2c transaction.
|
||||
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
|
||||
// 9 bits, a single transaction will take around 90μs to complete.
|
||||
//
|
||||
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
|
||||
// poll loop takes at least 8 clock cycles to execute
|
||||
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
|
||||
|
||||
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
|
||||
|
||||
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
||||
|
||||
static volatile uint8_t slave_buffer_pos;
|
||||
static volatile bool slave_has_register_set = false;
|
||||
|
||||
// Wait for an i2c operation to finish
|
||||
inline static
|
||||
void i2c_delay(void) {
|
||||
uint16_t lim = 0;
|
||||
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
|
||||
lim++;
|
||||
|
||||
// easier way, but will wait slightly longer
|
||||
// _delay_us(100);
|
||||
}
|
||||
|
||||
// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
|
||||
void i2c_master_init(void) {
|
||||
// no prescaler
|
||||
TWSR = 0;
|
||||
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
|
||||
// Check datasheets for more info.
|
||||
TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
|
||||
}
|
||||
|
||||
// Start a transaction with the given i2c slave address. The direction of the
|
||||
// transfer is set with I2C_READ and I2C_WRITE.
|
||||
// returns: 0 => success
|
||||
// 1 => error
|
||||
uint8_t i2c_master_start(uint8_t address) {
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
|
||||
|
||||
i2c_delay();
|
||||
|
||||
// check that we started successfully
|
||||
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
|
||||
return 1;
|
||||
|
||||
TWDR = address;
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
|
||||
i2c_delay();
|
||||
|
||||
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
|
||||
return 1; // slave did not acknowledge
|
||||
else
|
||||
return 0; // success
|
||||
}
|
||||
|
||||
|
||||
// Finish the i2c transaction.
|
||||
void i2c_master_stop(void) {
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
||||
|
||||
uint16_t lim = 0;
|
||||
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
|
||||
lim++;
|
||||
}
|
||||
|
||||
// Write one byte to the i2c slave.
|
||||
// returns 0 => slave ACK
|
||||
// 1 => slave NACK
|
||||
uint8_t i2c_master_write(uint8_t data) {
|
||||
TWDR = data;
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
|
||||
i2c_delay();
|
||||
|
||||
// check if the slave acknowledged us
|
||||
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
|
||||
}
|
||||
|
||||
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
|
||||
// if ack=0 the acknowledge bit is not set.
|
||||
// returns: byte read from i2c device
|
||||
uint8_t i2c_master_read(int ack) {
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
|
||||
|
||||
i2c_delay();
|
||||
return TWDR;
|
||||
}
|
||||
|
||||
void i2c_reset_state(void) {
|
||||
TWCR = 0;
|
||||
}
|
||||
|
||||
void i2c_slave_init(uint8_t address) {
|
||||
TWAR = address << 0; // slave i2c address
|
||||
// TWEN - twi enable
|
||||
// TWEA - enable address acknowledgement
|
||||
// TWINT - twi interrupt flag
|
||||
// TWIE - enable the twi interrupt
|
||||
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
|
||||
}
|
||||
|
||||
ISR(TWI_vect);
|
||||
|
||||
ISR(TWI_vect) {
|
||||
uint8_t ack = 1;
|
||||
switch(TW_STATUS) {
|
||||
case TW_SR_SLA_ACK:
|
||||
// this device has been addressed as a slave receiver
|
||||
slave_has_register_set = false;
|
||||
break;
|
||||
|
||||
case TW_SR_DATA_ACK:
|
||||
// this device has received data as a slave receiver
|
||||
// The first byte that we receive in this transaction sets the location
|
||||
// of the read/write location of the slaves memory that it exposes over
|
||||
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
|
||||
// slave_buffer_pos after each write.
|
||||
if(!slave_has_register_set) {
|
||||
slave_buffer_pos = TWDR;
|
||||
// don't acknowledge the master if this memory loctaion is out of bounds
|
||||
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
|
||||
ack = 0;
|
||||
slave_buffer_pos = 0;
|
||||
}
|
||||
slave_has_register_set = true;
|
||||
} else {
|
||||
i2c_slave_buffer[slave_buffer_pos] = TWDR;
|
||||
BUFFER_POS_INC();
|
||||
}
|
||||
break;
|
||||
|
||||
case TW_ST_SLA_ACK:
|
||||
case TW_ST_DATA_ACK:
|
||||
// master has addressed this device as a slave transmitter and is
|
||||
// requesting data.
|
||||
TWDR = i2c_slave_buffer[slave_buffer_pos];
|
||||
BUFFER_POS_INC();
|
||||
break;
|
||||
|
||||
case TW_BUS_ERROR: // something went wrong, reset twi state
|
||||
TWCR = 0;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
// Reset everything, so we are ready for the next TWI interrupt
|
||||
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
|
||||
}
|
||||
#endif
|
||||
|
|
@ -1,46 +0,0 @@
|
|||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#ifndef F_CPU
|
||||
#define F_CPU 16000000UL
|
||||
#endif
|
||||
|
||||
#define I2C_READ 1
|
||||
#define I2C_WRITE 0
|
||||
|
||||
#define I2C_ACK 1
|
||||
#define I2C_NACK 0
|
||||
|
||||
#define SLAVE_BUFFER_SIZE 0x10
|
||||
|
||||
// i2c SCL clock frequency 400kHz
|
||||
#define SCL_CLOCK 400000L
|
||||
|
||||
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
||||
|
||||
void i2c_master_init(void);
|
||||
uint8_t i2c_master_start(uint8_t address);
|
||||
void i2c_master_stop(void);
|
||||
uint8_t i2c_master_write(uint8_t data);
|
||||
uint8_t i2c_master_read(int);
|
||||
void i2c_reset_state(void);
|
||||
void i2c_slave_init(uint8_t address);
|
||||
|
||||
|
||||
static inline unsigned char i2c_start_read(unsigned char addr) {
|
||||
return i2c_master_start((addr << 1) | I2C_READ);
|
||||
}
|
||||
|
||||
static inline unsigned char i2c_start_write(unsigned char addr) {
|
||||
return i2c_master_start((addr << 1) | I2C_WRITE);
|
||||
}
|
||||
|
||||
// from SSD1306 scrips
|
||||
extern unsigned char i2c_rep_start(unsigned char addr);
|
||||
extern void i2c_start_wait(unsigned char addr);
|
||||
extern unsigned char i2c_readAck(void);
|
||||
extern unsigned char i2c_readNak(void);
|
||||
extern unsigned char i2c_read(unsigned char ack);
|
||||
|
||||
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
|
||||
|
|
@ -1,29 +0,0 @@
|
|||
/*
|
||||
This is the c configuration file for the keymap
|
||||
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
Copyright 2015 Jack Humbert
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// place overrides here
|
||||
|
||||
|
||||
/* Use I2C or Serial */
|
||||
|
||||
#define USE_I2C
|
||||
#define SSD1306OLED
|
||||
|
|
@ -2,9 +2,6 @@
|
|||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
#ifdef SSD1306OLED
|
||||
#include "ssd1306.h"
|
||||
#endif
|
||||
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
|
|
@ -148,8 +145,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {
|
|||
return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
|
||||
}
|
||||
|
||||
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
|
||||
#ifdef SSD1306OLED
|
||||
#ifdef OLED_ENABLE
|
||||
|
||||
// You need to add source files to SRC in rules.mk when using OLED display functions
|
||||
void set_keylog(uint16_t keycode);
|
||||
|
|
@ -157,25 +153,10 @@ const char *read_keylog(void);
|
|||
const char *read_modifier_state(void);
|
||||
const char *read_host_led_state(void);
|
||||
|
||||
void matrix_init_user(void) {
|
||||
iota_gfx_init(false); // turns on the display
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
iota_gfx_task(); // this is what updates the display continuously
|
||||
}
|
||||
|
||||
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
|
||||
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
|
||||
memcpy(dest->display, source->display, sizeof(dest->display));
|
||||
dest->dirty = true;
|
||||
}
|
||||
}
|
||||
|
||||
void render_status(struct CharacterMatrix *matrix) {
|
||||
bool oled_task_user(void) {
|
||||
// Layer state
|
||||
char layer_str[22];
|
||||
matrix_write(matrix, "Layer: ");
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
uint8_t layer = get_highest_layer(layer_state);
|
||||
uint8_t default_layer = get_highest_layer(eeconfig_read_default_layer());
|
||||
switch (layer) {
|
||||
|
|
@ -207,27 +188,21 @@ void render_status(struct CharacterMatrix *matrix) {
|
|||
default:
|
||||
snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
|
||||
}
|
||||
matrix_write_ln(matrix, layer_str);
|
||||
oled_write_ln(layer_str, false);
|
||||
// Last entered keycode
|
||||
matrix_write_ln(matrix, read_keylog());
|
||||
oled_write_ln(read_keylog(), false);
|
||||
// Modifier state
|
||||
matrix_write_ln(matrix, read_modifier_state());
|
||||
oled_write_ln(read_modifier_state(), false);
|
||||
// Host Keyboard LED Status
|
||||
matrix_write(matrix, read_host_led_state());
|
||||
oled_write(read_host_led_state(), false);
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
|
||||
void iota_gfx_task_user(void) {
|
||||
struct CharacterMatrix matrix;
|
||||
matrix_clear(&matrix);
|
||||
render_status(&matrix);
|
||||
matrix_update(&display, &matrix);
|
||||
}
|
||||
|
||||
#endif//SSD1306OLED
|
||||
#endif
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
#ifdef SSD1306OLED
|
||||
#ifdef OLED_ENABLE
|
||||
if (record->event.pressed) {
|
||||
set_keylog(keycode);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,5 +1,6 @@
|
|||
# If you want to change display settings of the OLED, you need to change the following lines
|
||||
SRC += ./lib/glcdfont.c \
|
||||
./lib/keylogger.c \
|
||||
SRC += ./lib/keylogger.c \
|
||||
./lib/modifier_state_reader.c \
|
||||
./lib/host_led_state_reader.c
|
||||
|
||||
OLED_ENABLE = yes
|
||||
|
|
|
|||
|
|
@ -1,29 +0,0 @@
|
|||
/*
|
||||
This is the c configuration file for the keymap
|
||||
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
Copyright 2015 Jack Humbert
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
/* Use I2C or Serial */
|
||||
|
||||
#define USE_I2C
|
||||
#define SSD1306OLED
|
||||
|
||||
#endif
|
||||
|
|
@ -5,9 +5,6 @@
|
|||
#include "keymap_jis2us.h"
|
||||
#include "action_pseudo_lut.h"
|
||||
#include "keymap_japanese.h"
|
||||
#ifdef SSD1306OLED
|
||||
#include "ssd1306.h"
|
||||
#endif
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
|
|
@ -176,8 +173,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {
|
|||
}
|
||||
}
|
||||
|
||||
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
|
||||
#ifdef SSD1306OLED
|
||||
#ifdef OLED_ENABLE
|
||||
|
||||
// You need to add source files to SRC in rules.mk when using OLED display functions
|
||||
void set_keylog(uint16_t keycode);
|
||||
|
|
@ -185,86 +181,59 @@ const char *read_keylog(void);
|
|||
const char *read_modifier_state(void);
|
||||
const char *read_host_led_state(void);
|
||||
|
||||
void matrix_init_user(void) {
|
||||
iota_gfx_init(false); // turns on the display
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
iota_gfx_task(); // this is what updates the display continuously
|
||||
}
|
||||
|
||||
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
|
||||
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
|
||||
memcpy(dest->display, source->display, sizeof(dest->display));
|
||||
dest->dirty = true;
|
||||
}
|
||||
}
|
||||
|
||||
void render_status(struct CharacterMatrix *matrix) {
|
||||
bool oled_task_user(void) {
|
||||
// Layer state
|
||||
char layer_str[22];
|
||||
matrix_write(matrix, "Layer: ");
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
uint8_t layer = get_highest_layer(layer_state);
|
||||
uint8_t default_layer = biton32(eeconfig_read_default_layer());
|
||||
switch (layer) {
|
||||
case _QWERTY:
|
||||
switch (default_layer) {
|
||||
case _QWERTY:
|
||||
snprintf(layer_str, sizeof(layer_str), "Qwerty");
|
||||
break;
|
||||
case _PSEUDO_US:
|
||||
snprintf(layer_str, sizeof(layer_str), "Psuedo_US");
|
||||
break;
|
||||
default:
|
||||
snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer);
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case _RAISE:
|
||||
snprintf(layer_str, sizeof(layer_str), "Raise");
|
||||
break;
|
||||
case _LOWER:
|
||||
snprintf(layer_str, sizeof(layer_str), "Lower");
|
||||
break;
|
||||
uint8_t default_layer = get_highest_layer(eeconfig_read_default_layer());
|
||||
switch (layer) {
|
||||
case _QWERTY:
|
||||
switch (default_layer) {
|
||||
case _QWERTY:
|
||||
snprintf(layer_str, sizeof(layer_str), "Qwerty");
|
||||
break;
|
||||
case _PSEUDO_US:
|
||||
snprintf(layer_str, sizeof(layer_str), "Psuedo_US");
|
||||
break;
|
||||
default:
|
||||
snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer);
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case _RAISE:
|
||||
snprintf(layer_str, sizeof(layer_str), "Raise");
|
||||
break;
|
||||
case _LOWER:
|
||||
snprintf(layer_str, sizeof(layer_str), "Lower");
|
||||
break;
|
||||
case _PSEUDO_US_RAISE:
|
||||
snprintf(layer_str, sizeof(layer_str), "P_US_Raise");
|
||||
break;
|
||||
case _PSEUDO_US_LOWER:
|
||||
snprintf(layer_str, sizeof(layer_str), "P_US_Lower");
|
||||
break;
|
||||
case _ADJUST:
|
||||
snprintf(layer_str, sizeof(layer_str), "Adjust");
|
||||
break;
|
||||
default:
|
||||
snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
|
||||
}
|
||||
matrix_write_ln(matrix, layer_str);
|
||||
case _ADJUST:
|
||||
snprintf(layer_str, sizeof(layer_str), "Adjust");
|
||||
break;
|
||||
default:
|
||||
snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
|
||||
}
|
||||
oled_write_ln(layer_str, false);
|
||||
// Last entered keycode
|
||||
matrix_write_ln(matrix, read_keylog());
|
||||
oled_write_ln(read_keylog(), false);
|
||||
// Modifier state
|
||||
matrix_write_ln(matrix, read_modifier_state());
|
||||
oled_write_ln(read_modifier_state(), false);
|
||||
// Host Keyboard LED Status
|
||||
matrix_write(matrix, read_host_led_state());
|
||||
oled_write(read_host_led_state(), false);
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
void iota_gfx_task_user(void) {
|
||||
struct CharacterMatrix matrix;
|
||||
|
||||
#if DEBUG_TO_SCREEN
|
||||
if (debug_enable) {
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
|
||||
matrix_clear(&matrix);
|
||||
render_status(&matrix);
|
||||
matrix_update(&display, &matrix);
|
||||
}
|
||||
|
||||
#endif//SSD1306OLED
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
#ifdef SSD1306OLED
|
||||
#ifdef OLED_ENABLE
|
||||
if (record->event.pressed) {
|
||||
set_keylog(keycode);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
SRC += action_pseudo_lut.c
|
||||
|
||||
# If you want to change display settings of the OLED, you need to change the following lines
|
||||
SRC += ./lib/glcdfont.c \
|
||||
./lib/keylogger.c \
|
||||
SRC += ./lib/keylogger.c \
|
||||
./lib/modifier_state_reader.c \
|
||||
./lib/host_led_state_reader.c
|
||||
|
||||
OLED_ENABLE = yes
|
||||
|
|
|
|||
|
|
@ -1,137 +0,0 @@
|
|||
// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
|
||||
// See gfxfont.h for newer custom bitmap font info.
|
||||
|
||||
#include "progmem.h"
|
||||
|
||||
// Standard ASCII 5x7 font
|
||||
|
||||
const unsigned char font[] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
|
||||
0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
|
||||
0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
|
||||
0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
|
||||
0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
|
||||
0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
|
||||
0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
|
||||
0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
|
||||
0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
|
||||
0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
|
||||
0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
|
||||
0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
|
||||
0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
|
||||
0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
|
||||
0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
|
||||
0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
|
||||
0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
|
||||
0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
|
||||
0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
|
||||
0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
|
||||
0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
|
||||
0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
|
||||
0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
|
||||
0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
|
||||
0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
|
||||
0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
|
||||
0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
|
||||
0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
|
||||
0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
|
||||
0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
|
||||
0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
|
||||
0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
|
||||
0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
|
||||
0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
|
||||
0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
|
||||
0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
|
||||
0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
|
||||
0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
|
||||
0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
|
||||
0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
|
||||
0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
|
||||
0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
|
||||
0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
|
||||
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
|
||||
0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
|
||||
0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
|
||||
0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
|
||||
0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
|
||||
0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
|
||||
0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
|
||||
0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
|
||||
0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
|
||||
0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
|
||||
0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
|
||||
0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
|
||||
0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
|
||||
0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
|
||||
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
|
||||
0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
|
||||
0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
|
||||
0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
|
||||
0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
|
||||
0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
|
||||
0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
|
||||
0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
|
||||
0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
|
||||
0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
|
||||
0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
|
||||
0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
|
||||
0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
|
||||
0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
|
||||
0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
|
||||
0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
|
||||
0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
|
||||
0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
|
||||
0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
|
||||
0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
|
||||
0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
|
||||
0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
|
||||
0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
|
||||
0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
|
||||
0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
|
||||
0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
|
||||
0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
|
||||
0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
|
||||
0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
|
||||
0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
|
||||
0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
|
||||
0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
|
||||
0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
|
||||
0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
|
||||
0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
|
||||
0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
|
||||
0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
|
||||
0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
|
||||
0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
|
||||
0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
|
||||
0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
|
||||
0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
|
||||
0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
|
||||
0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
|
||||
0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
|
||||
0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
|
||||
0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
|
||||
0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
|
||||
0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
|
||||
0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
|
||||
0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
|
||||
0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
|
||||
0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
|
||||
0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
|
||||
0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
|
||||
0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
|
||||
0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
|
||||
0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
|
||||
0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
|
||||
0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
|
||||
0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
|
||||
0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
|
||||
0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
|
||||
0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
|
||||
0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
|
||||
0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
|
||||
0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
|
||||
0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00
|
||||
};
|
||||
|
|
@ -17,9 +17,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
|||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
CUSTOM_MATRIX = lite
|
||||
OLED_DRIVER = SSD1306
|
||||
|
||||
# project specific files
|
||||
SRC += matrix.c \
|
||||
i2c.c \
|
||||
ssd1306.c
|
||||
SRC += matrix.c
|
||||
QUANTUM_LIB_SRC += uart.c
|
||||
|
|
|
|||
|
|
@ -1,343 +0,0 @@
|
|||
#ifdef SSD1306OLED
|
||||
|
||||
#include "ssd1306.h"
|
||||
#include "i2c.h"
|
||||
#include <string.h>
|
||||
#include "print.h"
|
||||
#ifdef PROTOCOL_LUFA
|
||||
#include "lufa.h"
|
||||
#endif
|
||||
#include "sendchar.h"
|
||||
#include "timer.h"
|
||||
|
||||
struct CharacterMatrix display;
|
||||
|
||||
extern const unsigned char font[] PROGMEM;
|
||||
|
||||
// Set this to 1 to help diagnose early startup problems
|
||||
// when testing power-on with ble. Turn it off otherwise,
|
||||
// as the latency of printing most of the debug info messes
|
||||
// with the matrix scan, causing keys to drop.
|
||||
#define DEBUG_TO_SCREEN 0
|
||||
|
||||
//static uint16_t last_battery_update;
|
||||
//static uint32_t vbat;
|
||||
//#define BatteryUpdateInterval 10000 /* milliseconds */
|
||||
|
||||
// 'last_flush' is declared as uint16_t,
|
||||
// so this must be less than 65535
|
||||
#define ScreenOffInterval 60000 /* milliseconds */
|
||||
#if DEBUG_TO_SCREEN
|
||||
static uint8_t displaying;
|
||||
#endif
|
||||
static uint16_t last_flush;
|
||||
|
||||
static bool force_dirty = true;
|
||||
|
||||
// Write command sequence.
|
||||
// Returns true on success.
|
||||
static inline bool _send_cmd1(uint8_t cmd) {
|
||||
bool res = false;
|
||||
|
||||
if (i2c_start_write(SSD1306_ADDRESS)) {
|
||||
xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
|
||||
goto done;
|
||||
}
|
||||
|
||||
if (i2c_master_write(0x0 /* command byte follows */)) {
|
||||
print("failed to write control byte\n");
|
||||
|
||||
goto done;
|
||||
}
|
||||
|
||||
if (i2c_master_write(cmd)) {
|
||||
xprintf("failed to write command %d\n", cmd);
|
||||
goto done;
|
||||
}
|
||||
res = true;
|
||||
done:
|
||||
i2c_master_stop();
|
||||
return res;
|
||||
}
|
||||
|
||||
// Write 2-byte command sequence.
|
||||
// Returns true on success
|
||||
static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
|
||||
if (!_send_cmd1(cmd)) {
|
||||
return false;
|
||||
}
|
||||
return _send_cmd1(opr);
|
||||
}
|
||||
|
||||
// Write 3-byte command sequence.
|
||||
// Returns true on success
|
||||
static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
|
||||
if (!_send_cmd1(cmd)) {
|
||||
return false;
|
||||
}
|
||||
if (!_send_cmd1(opr1)) {
|
||||
return false;
|
||||
}
|
||||
return _send_cmd1(opr2);
|
||||
}
|
||||
|
||||
#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
|
||||
#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
|
||||
#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
|
||||
|
||||
static void clear_display(void) {
|
||||
matrix_clear(&display);
|
||||
|
||||
// Clear all of the display bits (there can be random noise
|
||||
// in the RAM on startup)
|
||||
send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
|
||||
send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
|
||||
|
||||
if (i2c_start_write(SSD1306_ADDRESS)) {
|
||||
goto done;
|
||||
}
|
||||
if (i2c_master_write(0x40)) {
|
||||
// Data mode
|
||||
goto done;
|
||||
}
|
||||
for (uint8_t row = 0; row < MatrixRows; ++row) {
|
||||
for (uint8_t col = 0; col < DisplayWidth; ++col) {
|
||||
i2c_master_write(0);
|
||||
}
|
||||
}
|
||||
|
||||
display.dirty = false;
|
||||
|
||||
done:
|
||||
i2c_master_stop();
|
||||
}
|
||||
|
||||
#if DEBUG_TO_SCREEN
|
||||
#undef sendchar
|
||||
static int8_t capture_sendchar(uint8_t c) {
|
||||
sendchar(c);
|
||||
iota_gfx_write_char(c);
|
||||
|
||||
if (!displaying) {
|
||||
iota_gfx_flush();
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
bool iota_gfx_init(bool rotate) {
|
||||
bool success = false;
|
||||
|
||||
i2c_master_init();
|
||||
send_cmd1(DisplayOff);
|
||||
send_cmd2(SetDisplayClockDiv, 0x80);
|
||||
send_cmd2(SetMultiPlex, DisplayHeight - 1);
|
||||
|
||||
send_cmd2(SetDisplayOffset, 0);
|
||||
|
||||
|
||||
send_cmd1(SetStartLine | 0x0);
|
||||
send_cmd2(SetChargePump, 0x14 /* Enable */);
|
||||
send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
|
||||
|
||||
if(rotate){
|
||||
// the following Flip the display orientation 180 degrees
|
||||
send_cmd1(SegRemap);
|
||||
send_cmd1(ComScanInc);
|
||||
}else{
|
||||
// Flips the display orientation 0 degrees
|
||||
send_cmd1(SegRemap | 0x1);
|
||||
send_cmd1(ComScanDec);
|
||||
}
|
||||
|
||||
send_cmd2(SetComPins, 0x2);
|
||||
send_cmd2(SetContrast, 0x8f);
|
||||
send_cmd2(SetPreCharge, 0xf1);
|
||||
send_cmd2(SetVComDetect, 0x40);
|
||||
send_cmd1(DisplayAllOnResume);
|
||||
send_cmd1(NormalDisplay);
|
||||
send_cmd1(DeActivateScroll);
|
||||
send_cmd1(DisplayOn);
|
||||
|
||||
send_cmd2(SetContrast, 0); // Dim
|
||||
|
||||
clear_display();
|
||||
|
||||
success = true;
|
||||
|
||||
iota_gfx_flush();
|
||||
|
||||
#if DEBUG_TO_SCREEN
|
||||
print_set_sendchar(capture_sendchar);
|
||||
#endif
|
||||
|
||||
done:
|
||||
return success;
|
||||
}
|
||||
|
||||
bool iota_gfx_off(void) {
|
||||
bool success = false;
|
||||
|
||||
send_cmd1(DisplayOff);
|
||||
success = true;
|
||||
|
||||
done:
|
||||
return success;
|
||||
}
|
||||
|
||||
bool iota_gfx_on(void) {
|
||||
bool success = false;
|
||||
|
||||
send_cmd1(DisplayOn);
|
||||
success = true;
|
||||
|
||||
done:
|
||||
return success;
|
||||
}
|
||||
|
||||
void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
|
||||
*matrix->cursor = c;
|
||||
++matrix->cursor;
|
||||
|
||||
if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
|
||||
// We went off the end; scroll the display upwards by one line
|
||||
memmove(&matrix->display[0], &matrix->display[1],
|
||||
MatrixCols * (MatrixRows - 1));
|
||||
matrix->cursor = &matrix->display[MatrixRows - 1][0];
|
||||
memset(matrix->cursor, ' ', MatrixCols);
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
|
||||
matrix->dirty = true;
|
||||
|
||||
if (c == '\n') {
|
||||
// Clear to end of line from the cursor and then move to the
|
||||
// start of the next line
|
||||
uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
|
||||
|
||||
while (cursor_col++ < MatrixCols) {
|
||||
matrix_write_char_inner(matrix, ' ');
|
||||
}
|
||||
return;
|
||||
}
|
||||
|
||||
matrix_write_char_inner(matrix, c);
|
||||
}
|
||||
|
||||
void iota_gfx_write_char(uint8_t c) {
|
||||
matrix_write_char(&display, c);
|
||||
}
|
||||
|
||||
void matrix_write(struct CharacterMatrix *matrix, const char *data) {
|
||||
const char *end = data + strlen(data);
|
||||
while (data < end) {
|
||||
matrix_write_char(matrix, *data);
|
||||
++data;
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
|
||||
char data_ln[strlen(data)+2];
|
||||
snprintf(data_ln, sizeof(data_ln), "%s\n", data);
|
||||
matrix_write(matrix, data_ln);
|
||||
}
|
||||
|
||||
void iota_gfx_write(const char *data) {
|
||||
matrix_write(&display, data);
|
||||
}
|
||||
|
||||
void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
|
||||
while (true) {
|
||||
uint8_t c = pgm_read_byte(data);
|
||||
if (c == 0) {
|
||||
return;
|
||||
}
|
||||
matrix_write_char(matrix, c);
|
||||
++data;
|
||||
}
|
||||
}
|
||||
|
||||
void iota_gfx_write_P(const char *data) {
|
||||
matrix_write_P(&display, data);
|
||||
}
|
||||
|
||||
void matrix_clear(struct CharacterMatrix *matrix) {
|
||||
memset(matrix->display, ' ', sizeof(matrix->display));
|
||||
matrix->cursor = &matrix->display[0][0];
|
||||
matrix->dirty = true;
|
||||
}
|
||||
|
||||
void iota_gfx_clear_screen(void) {
|
||||
matrix_clear(&display);
|
||||
}
|
||||
|
||||
void matrix_render(struct CharacterMatrix *matrix) {
|
||||
last_flush = timer_read();
|
||||
iota_gfx_on();
|
||||
#if DEBUG_TO_SCREEN
|
||||
++displaying;
|
||||
#endif
|
||||
|
||||
// Move to the home position
|
||||
send_cmd3(PageAddr, 0, MatrixRows - 1);
|
||||
send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
|
||||
|
||||
if (i2c_start_write(SSD1306_ADDRESS)) {
|
||||
goto done;
|
||||
}
|
||||
if (i2c_master_write(0x40)) {
|
||||
// Data mode
|
||||
goto done;
|
||||
}
|
||||
|
||||
for (uint8_t row = 0; row < MatrixRows; ++row) {
|
||||
for (uint8_t col = 0; col < MatrixCols; ++col) {
|
||||
const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
|
||||
|
||||
for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
|
||||
uint8_t colBits = pgm_read_byte(glyph + glyphCol);
|
||||
i2c_master_write(colBits);
|
||||
}
|
||||
|
||||
// 1 column of space between chars (it's not included in the glyph)
|
||||
//i2c_master_write(0);
|
||||
}
|
||||
}
|
||||
|
||||
matrix->dirty = false;
|
||||
|
||||
done:
|
||||
i2c_master_stop();
|
||||
#if DEBUG_TO_SCREEN
|
||||
--displaying;
|
||||
#endif
|
||||
}
|
||||
|
||||
void iota_gfx_flush(void) {
|
||||
matrix_render(&display);
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void iota_gfx_task_user(void) {
|
||||
}
|
||||
|
||||
void iota_gfx_task(void) {
|
||||
iota_gfx_task_user();
|
||||
|
||||
if (display.dirty|| force_dirty) {
|
||||
iota_gfx_flush();
|
||||
force_dirty = false;
|
||||
}
|
||||
|
||||
if (timer_elapsed(last_flush) > ScreenOffInterval) {
|
||||
iota_gfx_off();
|
||||
}
|
||||
}
|
||||
|
||||
bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
|
||||
force_dirty = true;
|
||||
return true;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -1,90 +0,0 @@
|
|||
#pragma once
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdio.h>
|
||||
#include "action.h"
|
||||
|
||||
enum ssd1306_cmds {
|
||||
DisplayOff = 0xAE,
|
||||
DisplayOn = 0xAF,
|
||||
|
||||
SetContrast = 0x81,
|
||||
DisplayAllOnResume = 0xA4,
|
||||
|
||||
DisplayAllOn = 0xA5,
|
||||
NormalDisplay = 0xA6,
|
||||
InvertDisplay = 0xA7,
|
||||
SetDisplayOffset = 0xD3,
|
||||
SetComPins = 0xda,
|
||||
SetVComDetect = 0xdb,
|
||||
SetDisplayClockDiv = 0xD5,
|
||||
SetPreCharge = 0xd9,
|
||||
SetMultiPlex = 0xa8,
|
||||
SetLowColumn = 0x00,
|
||||
SetHighColumn = 0x10,
|
||||
SetStartLine = 0x40,
|
||||
|
||||
SetMemoryMode = 0x20,
|
||||
ColumnAddr = 0x21,
|
||||
PageAddr = 0x22,
|
||||
|
||||
ComScanInc = 0xc0,
|
||||
ComScanDec = 0xc8,
|
||||
SegRemap = 0xa0,
|
||||
SetChargePump = 0x8d,
|
||||
ExternalVcc = 0x01,
|
||||
SwitchCapVcc = 0x02,
|
||||
|
||||
ActivateScroll = 0x2f,
|
||||
DeActivateScroll = 0x2e,
|
||||
SetVerticalScrollArea = 0xa3,
|
||||
RightHorizontalScroll = 0x26,
|
||||
LeftHorizontalScroll = 0x27,
|
||||
VerticalAndRightHorizontalScroll = 0x29,
|
||||
VerticalAndLeftHorizontalScroll = 0x2a,
|
||||
};
|
||||
|
||||
// Controls the SSD1306 128x32 OLED display via i2c
|
||||
|
||||
#ifndef SSD1306_ADDRESS
|
||||
#define SSD1306_ADDRESS 0x3C
|
||||
#endif
|
||||
|
||||
#define DisplayHeight 32
|
||||
#define DisplayWidth 128
|
||||
|
||||
#define FontHeight 8
|
||||
#define FontWidth 6
|
||||
|
||||
#define MatrixRows (DisplayHeight / FontHeight)
|
||||
#define MatrixCols (DisplayWidth / FontWidth)
|
||||
|
||||
struct CharacterMatrix {
|
||||
uint8_t display[MatrixRows][MatrixCols];
|
||||
uint8_t *cursor;
|
||||
bool dirty;
|
||||
};
|
||||
|
||||
extern struct CharacterMatrix display;
|
||||
|
||||
bool iota_gfx_init(bool rotate);
|
||||
void iota_gfx_task(void);
|
||||
bool iota_gfx_off(void);
|
||||
bool iota_gfx_on(void);
|
||||
void iota_gfx_flush(void);
|
||||
void iota_gfx_write_char(uint8_t c);
|
||||
void iota_gfx_write(const char *data);
|
||||
void iota_gfx_write_P(const char *data);
|
||||
void iota_gfx_clear_screen(void);
|
||||
|
||||
void iota_gfx_task_user(void);
|
||||
|
||||
void matrix_clear(struct CharacterMatrix *matrix);
|
||||
void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
|
||||
void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
|
||||
void matrix_write(struct CharacterMatrix *matrix, const char *data);
|
||||
void matrix_write_ln(struct CharacterMatrix *matrix, const char *data);
|
||||
void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
|
||||
void matrix_render(struct CharacterMatrix *matrix);
|
||||
|
||||
bool process_record_gfx(uint16_t keycode, keyrecord_t *record);
|
||||
Loading…
Reference in New Issue