AVR GPIO macro defines more readable (#5937)

* A little easier to read the definition of the GPIO control macro for AVR.

No change in build result.

* Changed to not use GNU statement expression extension.

No change in build result.

* Modified split_common/serial.c to use qmk_firmware standard GPIO control macro.

No change in build result.

* fix PE6 -> E6

* remove some space

* add some comment to config_common.h

* Changed split_common/serial.c to use a newer version of qmk_firmware standard GPIO control macro.
daktil_manuform
Takeshi ISHII 2019-08-22 09:10:47 +09:00 committed by Drashna Jaelre
parent b62e160a89
commit 1c5b0cbbeb
3 changed files with 30 additions and 26 deletions

View File

@ -132,6 +132,16 @@
#define F7 PINDEF(F, 7)
#endif
#ifndef __ASSEMBLER__
#define _PIN_ADDRESS(p, offset) _SFR_IO8(ADDRESS_BASE + (p >> PORT_SHIFTER) + offset)
// Port X Input Pins Address
#define PINx_ADDRESS(p) _PIN_ADDRESS(p, 0)
// Port X Data Direction Register, 0:input 1:output
#define DDRx_ADDRESS(p) _PIN_ADDRESS(p, 1)
// Port X Data Register
#define PORTx_ADDRESS(p) _PIN_ADDRESS(p, 2)
#endif
#elif defined(PROTOCOL_CHIBIOS)
// Defines mapping for Proton C replacement
#ifdef CONVERT_TO_PROTON_C

View File

@ -149,18 +149,17 @@ extern layer_state_t default_layer_state;
#if defined(__AVR__)
typedef uint8_t pin_t;
#define PIN_ADDRESS(p, offset) (_SFR_IO8(ADDRESS_BASE + ((p) >> PORT_SHIFTER) + (offset)))
#define setPinInput(pin) (PIN_ADDRESS(pin, 1) &= ~_BV((pin) & 0xF))
#define setPinInputHigh(pin) (PIN_ADDRESS(pin, 1) &= ~_BV((pin) & 0xF), \
PIN_ADDRESS(pin, 2) |= _BV((pin) & 0xF))
#define setPinInput(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin) & 0xF))
#define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin) & 0xF), \
PORTx_ADDRESS(pin) |= _BV((pin) & 0xF))
#define setPinInputLow(pin) _Static_assert(0, "AVR processors cannot implement an input as pull low")
#define setPinOutput(pin) (PIN_ADDRESS(pin, 1) |= _BV((pin) & 0xF))
#define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin) & 0xF))
#define writePinHigh(pin) (PIN_ADDRESS(pin, 2) |= _BV((pin) & 0xF))
#define writePinLow(pin) (PIN_ADDRESS(pin, 2) &= ~_BV((pin) & 0xF))
#define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin) & 0xF))
#define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin) & 0xF))
#define writePin(pin, level) ((level) ? writePinHigh(pin) : writePinLow(pin))
#define readPin(pin) ((bool)(PIN_ADDRESS(pin, 0) & _BV((pin) & 0xF)))
#define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin) & 0xF)))
#elif defined(PROTOCOL_CHIBIOS)
typedef ioline_t pin_t;

View File

@ -29,36 +29,32 @@
#endif
#endif
#define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin) & 0xF), \
PORTx_ADDRESS(pin) |= _BV((pin) & 0xF))
#define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin) & 0xF))
#define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin) & 0xF))
#define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin) & 0xF))
#define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin) & 0xF)))
#if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
#define SERIAL_PIN_DDR DDRD
#define SERIAL_PIN_PORT PORTD
#define SERIAL_PIN_INPUT PIND
#if SOFT_SERIAL_PIN == D0
#define SERIAL_PIN_MASK _BV(PD0)
#define EIMSK_BIT _BV(INT0)
#define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01)))
#define SERIAL_PIN_INTERRUPT INT0_vect
#elif SOFT_SERIAL_PIN == D1
#define SERIAL_PIN_MASK _BV(PD1)
#define EIMSK_BIT _BV(INT1)
#define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11)))
#define SERIAL_PIN_INTERRUPT INT1_vect
#elif SOFT_SERIAL_PIN == D2
#define SERIAL_PIN_MASK _BV(PD2)
#define EIMSK_BIT _BV(INT2)
#define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21)))
#define SERIAL_PIN_INTERRUPT INT2_vect
#elif SOFT_SERIAL_PIN == D3
#define SERIAL_PIN_MASK _BV(PD3)
#define EIMSK_BIT _BV(INT3)
#define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31)))
#define SERIAL_PIN_INTERRUPT INT3_vect
#endif
#elif SOFT_SERIAL_PIN == E6
#define SERIAL_PIN_DDR DDRE
#define SERIAL_PIN_PORT PORTE
#define SERIAL_PIN_INPUT PINE
#define SERIAL_PIN_MASK _BV(PE6)
#define EIMSK_BIT _BV(INT6)
#define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
#define SERIAL_PIN_INTERRUPT INT6_vect
@ -200,33 +196,32 @@ void serial_delay_half2(void) {
inline static void serial_output(void) ALWAYS_INLINE;
inline static
void serial_output(void) {
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
setPinOutput(SOFT_SERIAL_PIN);
}
// make the serial pin an input with pull-up resistor
inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
inline static
void serial_input_with_pullup(void) {
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
setPinInputHigh(SOFT_SERIAL_PIN);
}
inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
inline static
uint8_t serial_read_pin(void) {
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
return !! readPin(SOFT_SERIAL_PIN);
}
inline static void serial_low(void) ALWAYS_INLINE;
inline static
void serial_low(void) {
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
writePinLow(SOFT_SERIAL_PIN);
}
inline static void serial_high(void) ALWAYS_INLINE;
inline static
void serial_high(void) {
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
writePinHigh(SOFT_SERIAL_PIN);
}
void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
@ -245,7 +240,7 @@ void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
// Enable INT0-INT3,INT6
EIMSK |= EIMSK_BIT;
#if SERIAL_PIN_MASK == _BV(PE6)
#if SOFT_SERIAL_PIN == E6
// Trigger on falling edge of INT6
EICRB &= EICRx_BIT;
#else