[Keyboard] Hadron keymap and config updates (#5632)

* update hadron keymaps, code cleanup

* keymap update

* refactor custom matrix to use quantum matrix defines

* fix wrong pin for matrix
daktil_manuform
ishtob 2019-04-16 17:49:24 -04:00 committed by Drashna Jaelre
parent 93b7fccad6
commit 0a6beab224
11 changed files with 90 additions and 275 deletions

View File

@ -48,7 +48,7 @@
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#define CH_CFG_ST_FREQUENCY 100000
#define CH_CFG_ST_FREQUENCY 1000
/**
* @brief Time delta constant for the tick-less mode.
@ -58,7 +58,7 @@
* The value one is not valid, timeouts are rounded up to
* this value.
*/
#define CH_CFG_ST_TIMEDELTA 2
#define CH_CFG_ST_TIMEDELTA 0
/** @} */

View File

@ -27,6 +27,28 @@
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#undef MATRIX_ROW_PINS
#undef MATRIX_COL_PINS
#define MATRIX_ROW_PINS { C15, C14, A10, A9, A8 }
#define MATRIX_COL_PINS { B8, B2, B10, A0, A1, A2, B0, A3, B1, A6, A7, B12, C13, B11, B9 }
#define UNUSED_PINS
#define NUMBER_OF_ENCODERS 1
#define ENCODERS_PAD_A { B13 }
#define ENCODERS_PAD_B { B14 }
//Audio
#undef AUDIO_VOICES
#undef C6_AUDIO
@ -55,16 +77,6 @@
#define micro_oled_rotate_180
#endif
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 6
@ -185,13 +197,13 @@
#define ZC_DET_TIME 0
#define AUTO_CAL_TIME 3
//#define RGBLIGHT_ANIMATIONS
#define RGBLIGHT_ANIMATIONS
//#define RGBLED_NUM 10
//#define RGB_DI_PIN B5
//#define DRIVER_LED_TOTAL RGBLED_NUM
#define RGBLED_NUM 10
#define RGB_DI_PIN B5
#define DRIVER_LED_TOTAL RGBLED_NUM
//#define RGB_MATRIX_KEYPRESSES
// #define RGB_MATRIX_KEYPRESSES
#define SOLENOID_PIN A14

View File

@ -111,7 +111,7 @@
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#define HAL_USE_PWM TRUE
#endif
/**

View File

@ -175,19 +175,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Adjust (Lower + Raise)
* ,------+------+------+------+------+------------------------------------------------.
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - |
* | Reset|HPT TG|HPT FB|HPT M+|HPT M-|HPT RS| | | | | |EEP RS|
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
* | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del |
* | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG |
* | |Voice-|Voice+|Mus on|Musoff| | | | | | |BL - | BL + |BL ST |BL TG |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | |
* | | | | | | | | | | | |CK RS |CK - |CK + |CK TG |
* `--------------------------------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT(
RESET, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST , _______, _______, _______, _______, _______, _______, \
RESET, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST , _______, _______, _______, _______, _______, EEP_RST, \
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \
_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \

View File

@ -153,19 +153,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Adjust (Lower + Raise)
* ,------+------+------+------+------+------------------------------------------------.
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - |
* | Reset|HPT TG|HPT FB|HPT M+|HPT M-|HPT RS| | | | | |EEP RS|
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
* | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del |
* | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG |
* | |Voice-|Voice+|Mus on|Musoff| | | | | | |BL - | BL + |BL ST |BL TG |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | |
* | | | | | | | | | | | |CK RS |CK - |CK + |CK TG |
* `--------------------------------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT_wrapper(
_______, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST, _______, _______, _______, _______, _______, _______, \
_______, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST, _______, _______, _______, _______, _______, EEP_RST, \
RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \
_______, MAGIC_TOGGLE_NKRO, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \
_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \

View File

@ -17,7 +17,8 @@ When adding your keymap to this list, keep it organised alphabetically (select l
* **folder_name** description
# List of Planck keymaps
# List of Hadron keymaps
* **default** default Planck layout
* **cbbrowne** cbbrowne's Planck layout
* **default** default Hadron layout
* **ishtob** ishtob's Hadron layout
* **sebaslayout** sebaslayout's Hadron layout

View File

@ -1,195 +0,0 @@
#include <string.h>
#include "hal.h"
#include "timer.h"
#include "wait.h"
#include "printf.h"
#include "backlight.h"
#include "matrix.h"
#include "action.h"
#include "keycode.h"
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_COLS];
static bool debouncing = false;
static uint16_t debouncing_time = 0;
static uint8_t encoder_state = 0;
static int8_t encoder_value = 0;
static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 };
__attribute__ ((weak))
void matrix_init_user(void) {}
__attribute__ ((weak))
void matrix_scan_user(void) {}
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
void matrix_init(void) {
printf("matrix init\n");
//debug_matrix = true;
// encoder setup
palSetPadMode(GPIOB, 13, PAL_MODE_INPUT_PULLUP);
palSetPadMode(GPIOB, 14, PAL_MODE_INPUT_PULLUP);
encoder_state = (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1);
// actual matrix setup
palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOA, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOA, 1, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOA, 2, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOA, 3, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOA, 6, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOC, 13, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOA, 9, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOA, 8, PAL_MODE_INPUT_PULLDOWN);
memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t));
matrix_init_quantum();
}
__attribute__ ((weak))
void encoder_update(bool clockwise) { }
#ifndef ENCODER_RESOLUTION
#define ENCODER_RESOLUTION 4
#endif
uint8_t matrix_scan(void) {
// encoder on B13 and B14
encoder_state <<= 2;
encoder_state |= (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1);
encoder_value += encoder_LUT[encoder_state & 0xF];
if (encoder_value >= ENCODER_RESOLUTION) {
encoder_update(0);
}
if (encoder_value <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise
encoder_update(1);
}
encoder_value %= ENCODER_RESOLUTION;
// actual matrix
for (int col = 0; col < MATRIX_COLS; col++) {
matrix_row_t data = 0;
// strobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11, }
switch (col) {
case 0: palSetPad(GPIOB, 8); break;
case 1: palSetPad(GPIOB, 2); break;
case 2: palSetPad(GPIOB, 10); break;
case 3: palSetPad(GPIOA, 0); break;
case 4: palSetPad(GPIOA, 1); break;
case 5: palSetPad(GPIOA, 2); break;
case 6: palSetPad(GPIOB, 0); break;
case 7: palSetPad(GPIOA, 3); break;
case 8: palSetPad(GPIOB, 1); break;
case 9: palSetPad(GPIOA, 6); break;
case 10: palSetPad(GPIOA, 7); break;
case 11: palSetPad(GPIOB, 12); break;
case 12: palSetPad(GPIOC, 13); break;
case 13: palSetPad(GPIOB, 11); break;
case 14: palSetPad(GPIOB, 9); break;
}
// need wait to settle pin state
wait_us(20);
// read row data { PC15, PC14, PA10, PA9, PA8 }
data = (
(palReadPad(GPIOC, 15) << 0 ) |
(palReadPad(GPIOC, 14) << 1 ) |
(palReadPad(GPIOA, 10) << 2 ) |
(palReadPad(GPIOA, 9) << 3 ) |
(palReadPad(GPIOA, 8) << 4 )
);
// unstrobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11, }
switch (col) {
case 0: palClearPad(GPIOB, 8); break;
case 1: palClearPad(GPIOB, 2); break;
case 2: palClearPad(GPIOB, 10); break;
case 3: palClearPad(GPIOA, 0); break;
case 4: palClearPad(GPIOA, 1); break;
case 5: palClearPad(GPIOA, 2); break;
case 6: palClearPad(GPIOB, 0); break;
case 7: palClearPad(GPIOA, 3); break;
case 8: palClearPad(GPIOB, 1); break;
case 9: palClearPad(GPIOA, 6); break;
case 10: palClearPad(GPIOA, 7); break;
case 11: palClearPad(GPIOB, 12); break;
case 12: palClearPad(GPIOC, 13); break;
case 13: palClearPad(GPIOB, 11); break;
case 14: palClearPad(GPIOB, 9); break;
}
if (matrix_debouncing[col] != data) {
matrix_debouncing[col] = data;
debouncing = true;
debouncing_time = timer_read();
}
}
if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
for (int row = 0; row < MATRIX_ROWS; row++) {
matrix[row] = 0;
for (int col = 0; col < MATRIX_COLS; col++) {
matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col);
}
}
debouncing = false;
}
matrix_scan_quantum();
return 1;
}
bool matrix_is_on(uint8_t row, uint8_t col) {
return (matrix[row] & (1<<col));
}
matrix_row_t matrix_get_row(uint8_t row) {
return matrix[row];
}
void matrix_print(void) {
printf("\nr/c 01234567\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
printf("%X0: ", row);
matrix_row_t data = matrix_get_row(row);
for (int col = 0; col < MATRIX_COLS; col++) {
if (data & (1<<col))
printf("1");
else
printf("0");
}
printf("\n");
}
}

View File

@ -225,7 +225,7 @@
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 8
#define STM32_ST_USE_TIMER 2
#define STM32_ST_USE_TIMER 3
/*
* UART driver system settings.

View File

@ -1,57 +1,25 @@
# project specific files
SRC = matrix.c
## chip/board settings
# - the next two should match the directories in
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
MCU_FAMILY = STM32
MCU_SERIES = STM32F3xx
# Linker script to use
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
# or <this_dir>/ld/
MCU_LDSCRIPT = STM32F303xC
# Startup code to use
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
MCU_STARTUP = stm32f3xx
# Board: it should exist either in <chibios>/os/hal/boards/
# or <this_dir>/boards
BOARD = GENERIC_STM32_F303XC
# projecct specific files
# Cortex version
MCU = cortex-m4
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
ARMV = 7
USE_FPU = yes
# Vector table for application
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
OPT_DEFS =
# Options to pass to dfu-util when flashing
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
MCU = STM32F303
# Build Options
# comment out to disable the options.
#
BACKLIGHT_ENABLE = no
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = yes # Custom matrix file
CUSTOM_MATRIX = no # Custom matrix file
AUDIO_ENABLE = yes
RGBLIGHT_ENABLE = no
RGB_MATRIX_ENABLE = no #WS2812 once arm_rgb is implemented
HAPTIC_ENABLE += DRV2605L
QWIIC_ENABLE += MICRO_OLED
ENCODER_ENABLER = yes
# SERIAL_LINK_ENABLE = yes

View File

@ -16,9 +16,36 @@
#include "ver3.h"
#include "qwiic.h"
#include "action_layer.h"
#include "matrix.h"
#include "haptic.h"
#ifdef RGB_MATRIX_ENABLE
#include "rgblight.h"
const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
/*{row | col << 4}
| {x=0..224, y=0..64}
| | modifier
| | | */
{{1|(13<<4)}, {195, 3}, 0},
{{4|(13<<4)}, {195, 16}, 0},
{{4|(10<<4)}, {150, 16}, 0},
{{4|(7<<4)}, {105, 16}, 0},
{{4|(4<<4)}, {60, 16}, 0},
{{4|(1<<4)}, {15, 16}, 0},
{{1|(1<<4)}, {15, 3}, 0},
{{1|(4<<4)}, {60, 3}, 0},
{{1|(7<<4)}, {105, 3}, 0},
{{1|(10<<4)}, {150, 3}, 0}
};
#endif
uint8_t *o_fb;
uint16_t counterst = 0;
#ifdef QWIIC_MICRO_OLED_ENABLE
/* screen off after this many milliseconds */
@ -41,7 +68,7 @@ void draw_ui(void) {
send_command(DISPLAYON);
/* Layer indicator is 41 x 10 pixels */
#define LAYER_INDICATOR_X 0
#define LAYER_INDICATOR_X 5
#define LAYER_INDICATOR_Y 0
draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0);
@ -49,7 +76,7 @@ void draw_ui(void) {
draw_char(LAYER_INDICATOR_X + 34, LAYER_INDICATOR_Y + 2, layer + 0x30, PIXEL_ON, XOR, 0);
/* Matrix display is 19 x 9 pixels */
#define MATRIX_DISPLAY_X 0
#define MATRIX_DISPLAY_X 5
#define MATRIX_DISPLAY_Y 18
for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
@ -184,5 +211,10 @@ if (queue_for_send) {
send_command(DISPLAYOFF); /* 0xAE */
}
#endif
if (counterst == 0) {
//testPatternFB(o_fb);
}
counterst = (counterst + 1) % 1024;
//rgblight_task();
matrix_scan_user();
}

View File

@ -1,4 +1,4 @@
/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
/* Copyright 2018 ishtob
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -13,9 +13,6 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef VER3_H
#define VER3_H
#pragma once
#include "hadron.h"
#endif
#include "hadron.h"