Adding Docker build system & documentation

daktil_thumb_popravljen
Erik Dasque 2016-07-15 12:55:40 -04:00
parent 9ecf9073b9
commit 0446263935
2 changed files with 47 additions and 0 deletions

28
Dockerfile 100644
View File

@ -0,0 +1,28 @@
FROM debian:jessie
MAINTAINER Erik Dasque <erik@frenchguys.com>
RUN apt-get update
RUN apt-get install --no-install-recommends -y build-essential \
gcc \
unzip \
wget \
zip \
gcc-avr \
binutils-avr \
avr-libc \
dfu-programmer \
dfu-util \
gcc-arm-none-eabi \
binutils-arm-none-eabi \
libnewlib-arm-none-eabi \
git
RUN apt-get clean
RUN rm -rf /var/lib/apt/lists/*
ENV keyboard=ergodox_ez
ENV keymap=default
VOLUME /qmk
WORKDIR /qmk
CMD make clean ; make keyboard=${keyboard} keymap=${keymap}

View File

@ -75,6 +75,25 @@ Debian/Ubuntu example:
sudo apt-get update
sudo apt-get install gcc-avr avr-libc dfu-programmer
### Docker
If this is a bit complex for you, Docker might be the turn-key solution you need. After installing [Docker](https://www.docker.com/products/docker), run the following commands at the root of the QMK folder:
```bash
# You only need to run this once, it'll take a little while
docker build -t qmk .
# and you'll run this every time you want to build a keymap
# modify the keymap and keyboard assigment to compile what you want
# defaults are ergodox_ez/default
docker run -e keymap=gwen -e keyboard=ergodox_ez --rm -v $('pwd'):/qmk:rw qmk
```
This will compile the targetted keyboard/keymap and leave it in your QMK directory for you to flash.
### Vagrant
If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](VAGRANT_GUIDE.md).