2020-10-04 21:50:03 +02:00
/*
Copyright 2020 Nidzo Tomic < tomicn8 @ hotmail . com >
2022-03-16 01:06:27 +01:00
Copyright 2022 an_achronism < 87213873 + an - achronism @ users . noreply . github . com >
2020-10-04 21:50:03 +02:00
This program is free software : you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation , either version 2 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
# pragma once
# include "config_common.h"
/* USB Device descriptor parameter */
# define VENDOR_ID 0xFEED
# define PRODUCT_ID 0x8E81 // Yugo-M
# define DEVICE_VER 0x0001
# define MANUFACTURER IBM
# define PRODUCT Yugo-M (Model M replacement controller)
/* key matrix size */
# define MATRIX_ROWS 8
# define MATRIX_COLS 16
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS : AVR pins used for columns , left to right
* ROWS : AVR pins used for rows , top to bottom
* DIODE_DIRECTION : COL2ROW = COL = Anode ( + ) , ROW = Cathode ( - , marked on diode )
* ROW2COL = ROW = Anode ( + ) , COL = Cathode ( - , marked on diode )
*
*/
# define MATRIX_ROW_PINS { B8, B7, B6, B5, B4, B3, A15, A14 }
# define MATRIX_COL_PINS { A9, A8, B15, B14, B13, B12, B11, B10, B2, B1, B0, A7, A6, A5, A4, A3 }
# define UNUSED_PINS { A0, A1, A2, A10, A13, B9, C13, C14, C15 }
/* COL2ROW, ROW2COL*/
# define DIODE_DIRECTION ROW2COL
/* define if matrix has ghost */
# define MATRIX_HAS_GHOST
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */
# define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
// #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
// #define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO ( nKey Rollover ) to be enabled by default , regardless of the saved
* state in the bootmagic EEPROM settings . ( Note that NKRO must be enabled in the
* makefile for this to work . )
*
* If forced on , NKRO can be disabled via magic key ( default = LShift + RShift + N )
* until the next keyboard reset .
*
* NKRO may prevent your keystrokes from being detected in the BIOS , but it is
* fully operational during normal computer usage .
*
* For a less heavy - handed approach , enable NKRO via magic key ( LShift + RShift + N )
* or via bootmagic ( hold SPACE + N while plugging in the keyboard ) . Once set by
* bootmagic , NKRO mode will always be enabled until it is toggled again during a
* power - up .
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction .
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
2022-03-16 01:06:27 +01:00
/* redefine available (emulated) EEPROM as 4 kB rather than the default 1 kB to let VIA use more of the 8 kB of on-chip Flash of the STM32F303 to store 4 layers (since 4 layers * 8 rows * 16 columns * 2 = 1024 bytes but the default max available is 1023 bytes due to ATMEGA32U4 etc. only having 1 kB of EEPROM) */
# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095
