qmk_firmware/lib/lufa/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h

148 lines
4.6 KiB
C
Raw Normal View History

/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for ISPTarget.c.
*/
#ifndef _ISP_TARGET_
#define _ISP_TARGET_
/* Includes: */
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <util/delay.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/SPI.h>
#include "../V2Protocol.h"
#include "ISPProtocol.h"
#include "Config/AppConfig.h"
/* Preprocessor Checks: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
#undef ENABLE_ISP_PROTOCOL
#if !defined(ENABLE_XPROG_PROTOCOL)
#define ENABLE_XPROG_PROTOCOL
#endif
#endif
/* Macros: */
/** Low level device command to issue an extended FLASH address, for devices with over 128KB of FLASH. */
#define LOAD_EXTENDED_ADDRESS_CMD 0x4D
/** Macro to convert an ISP frequency to a number of timer clock cycles for the software SPI driver. */
#define TIMER_COMP(freq) (((F_CPU / 8) / 2 / freq) - 1)
/** ISP rescue clock speed in Hz, for clocking targets with incorrectly set fuses. */
#define ISP_RESCUE_CLOCK_SPEED 4000000
/* External Variables: */
extern bool HardwareSPIMode;
/* Function Prototypes: */
void ISPTarget_EnableTargetISP(void);
void ISPTarget_DisableTargetISP(void);
void ISPTarget_ConfigureRescueClock(void);
void ISPTarget_ConfigureSoftwareSPI(const uint8_t SCKDuration);
uint8_t ISPTarget_TransferSoftSPIByte(const uint8_t Byte);
void ISPTarget_ChangeTargetResetLine(const bool ResetTarget);
uint8_t ISPTarget_WaitWhileTargetBusy(void);
void ISPTarget_LoadExtendedAddress(void);
uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode,
const uint16_t PollAddress,
const uint8_t PollValue,
const uint8_t DelayMS,
const uint8_t ReadMemCommand);
/* Inline Functions: */
/** Sends a byte of ISP data to the attached target, using the appropriate SPI hardware or
* software routines depending on the selected ISP speed.
*
* \param[in] Byte Byte of data to send to the attached target
*/
static inline void ISPTarget_SendByte(const uint8_t Byte)
{
if (HardwareSPIMode)
SPI_SendByte(Byte);
else
ISPTarget_TransferSoftSPIByte(Byte);
}
/** Receives a byte of ISP data from the attached target, using the appropriate
* SPI hardware or software routines depending on the selected ISP speed.
*
* \return Received byte of data from the attached target
*/
static inline uint8_t ISPTarget_ReceiveByte(void)
{
uint8_t ReceivedByte;
if (HardwareSPIMode)
ReceivedByte = SPI_ReceiveByte();
else
ReceivedByte = ISPTarget_TransferSoftSPIByte(0x00);
#if defined(INVERTED_ISP_MISO)
return ~ReceivedByte;
#else
return ReceivedByte;
#endif
}
/** Sends and receives a byte of ISP data to and from the attached target, using the
* appropriate SPI hardware or software routines depending on the selected ISP speed.
*
* \param[in] Byte Byte of data to send to the attached target
*
* \return Received byte of data from the attached target
*/
static inline uint8_t ISPTarget_TransferByte(const uint8_t Byte)
{
uint8_t ReceivedByte;
if (HardwareSPIMode)
ReceivedByte = SPI_TransferByte(Byte);
else
ReceivedByte = ISPTarget_TransferSoftSPIByte(Byte);
#if defined(INVERTED_ISP_MISO)
return ~ReceivedByte;
#else
return ReceivedByte;
#endif
}
#endif