qmk_firmware/keyboards/idobao/id87/v2/config.h

150 lines
5.0 KiB
C
Raw Normal View History

// Copyright 2022 peepeetee (@peepeetee)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 11
#define MATRIX_COLS 9
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { E6, B0, B1, B2, B3, B7, F7, F6, F5, F4, F1 }
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
//#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
#define LED_CAPS_LOCK_PIN C7
//#define BACKLIGHT_PIN B7
//#define BACKLIGHT_LEVELS 3
//#define BACKLIGHT_BREATHING
#define RGB_DI_PIN E2
# define DRIVER_LED_TOTAL 103 /* 16 Bottom 87 top*/
#ifdef RGB_DI_PIN
# define RGBLED_NUM 103 /* 16 Bottom 87 top*/
# define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#endif
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
# define RGB_MATRIX_KEYPRESSES
# define ENABLE_RGB_MATRIX_ALPHAS_MODS
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_BREATHING
# define ENABLE_RGB_MATRIX_BAND_SAT
# define ENABLE_RGB_MATRIX_BAND_VAL
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
# define ENABLE_RGB_MATRIX_CYCLE_ALL
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
# define ENABLE_RGB_MATRIX_DUAL_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
# define ENABLE_RGB_MATRIX_RAINDROPS
# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define ENABLE_RGB_MATRIX_HUE_BREATHING
# define ENABLE_RGB_MATRIX_HUE_PENDULUM
# define ENABLE_RGB_MATRIX_HUE_WAVE
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define ENABLE_RGB_MATRIX_SPLASH
# define ENABLE_RGB_MATRIX_MULTISPLASH
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0