Added the wiring section

master
BubblesToTheLimit 2016-09-06 22:10:59 +02:00
parent 86ef2394b9
commit 252d00b51e
3 changed files with 82 additions and 42 deletions

View File

@ -2,7 +2,8 @@
Get all the parts / raw material
- For the 3D printing there are two options:
1. Filament, which is the basis for 3D printing. Luckily I could print at my work-place
which reduced the cost from 210€ to 70€
which reduced the cost from 210€ to 70€. The kind of filament you need depends on the 3D
printer you have available.
2. Buy the printout of adareth's model at shapeways for 210€ over here
http://www.shapeways.com/designer/adereth/creations
- Decide on the switches
@ -19,7 +20,7 @@
massdrop which is way different from usual online-stores. If you find a site that sells
these make sure you get the right amount and type of keys according to the layout
- I got the "TKL Base Set + TKL Modifier" from over here:
http://pimpmykeyboard.com/dsa-pbt-abs-blank-keycap-sets/ but I'm still too long keys
http://pimpmykeyboard.com/dsa-pbt-abs-blank-keycap-sets/ but I'm still two long keys
short, I will have to order those specifically and I have a bunch of keys I don't use
left-over.
- The USB-Cable that connects the keyboard to your computer
@ -27,12 +28,12 @@
really makes handling the keyboard so much more comfortable
- https://www.amazon.de/gp/product/B00NH11N5A/
- The main controller (right half)
- A Teensy 2.0, i got that one from here: https://www.pjrc.com/store/teensy.html
- A Teensy 2.0, I got that one from here: https://www.pjrc.com/store/teensy.html
- The chip, connectors and cable to give life to the left half
- TTRS cable and jacks
- Got my TTRS cable from here: http://www.digikey.de/product-search/de?keywords=839-1257-ND
- Got my TTRS jacks from here: http://www.digikey.de/product-search/de?keywords=CP-43514-ND
- MCP23018 16 bitIO Expander
- MCP23018 16 bit IO Expander
- Got mine from here: http://www.digikey.de/product-search/de?keywords=MCP23018-E%2FSP-ND
What I spend on my keyboard (should give you a rough estimate for your build):
@ -59,60 +60,99 @@
Depending on what you have available you might spend more or less money than me, 300€ however
is a good rough estimate.
* Dactyl Flexible PCB Rough Guide
After all the parts have arrived it is safe to move on to the next section
[[workbench.jpg]]
For now, take a look at the images and try to figure things out, I know
that's not great (it's better than nothing!)
* Wiring
1) Plug the switches into the Casing, no glue is needed, the casing provides the perfect fit.
2) Put the keycaps on the switches
** Making the PCB
[[file:switches_still_in_bag.jpg]]
Get two sheets of 6in square Pyralux™. Use the Toner Transfer method to
etch the Pyralux sheets as you would a usual PCB
[[file:]]switches_applied_to_casing.jpg
#+BEGIN_QUOTE
NOTE: If you only have an Inkjet make photocopies of the print out,
voilà Toner based copies!
#+END_QUOTE
Now going further on in the guide there are two options
1. The first option is to print flexible PCBs. The advantage is that you save alot of wiring
business, everything looks rather clean and you dont have to worry about your cables being too
thick such that the casing doesnt close. However if you don't have the means to print out such
PCBs there is the second option, hand-wiring everything by hand.
- The guide for this is very rough indeed and it doesnt include the firmware used. Wiring and
firmware play extremely close together, wiring before knowing your firmware is like buying a
shoe without measuring your feet before. For this option information about the exact
firmware is not published, this in addition to the fact that the pictures in this rough
guide are incomplete makes this option extremely beginner-unfriendly. Going in blind-sided
like this may lead to one of these things:
1. reprogramming huge parts of the firmware to match your wiring which comes with a ton of
debugging
2. rewiring to adapt to what the firmware expects, which may easily double your work here
- [[Route 1: Dactyl Flexible PCB Rough Guide]]
2. The second option is to hand-wire everything. For people like me who had never soldered before
this was great joy and pleasure.
- Here too firmware and wiring go hand in hand, you pretty much have to have a detailed look
at the firmware you are using before wiring anything. I provide my modification of the
"ergodox-firmware" over here: https://github.com/BubblesToTheLimit/ergodox-firmware
- Some of the steps of this guide may not be described in much detail, but in contrast to the
first guide there is a whole lot more of information.
- [[Route 2: Dactyl Hand-Wiring Guide]]
[[http://www.instructables.com/id/Toner-transfer-no-soak-high-quality-double-sided/][Here'sa handy toner transfer guide ...]]
** Route 1: Dactyl Flexible PCB Rough Guide
[[workbench.jpg]]
Print these PCB designs out...
For now, take a look at the images and try to figure things out, I know that's not great (it's
better than nothing!)
Left hand:
[[left-hand-pcb-pyralux.png]]
*** Making the PCB
Get two sheets of 6in square Pyralux™. Use the Toner Transfer method to etch the Pyralux sheets as
you would a usual PCB
Right hand:
[[right-hand-pcb-pyralux.png]]
#+BEGIN_QUOTE
NOTE: If you only have an Inkjet make photocopies of the print out,
voilà Toner based copies!
#+END_QUOTE
When you're done etching, you'll need to carefully cut the pcb into
pieces... See the images below.
[[http://www.instructables.com/id/Toner-transfer-no-soak-high-quality-double-sided/][Here'sa handy toner transfer guide ...]]
** This is Madness...
Print these PCB designs out...
The thumb cluster pcb for the left hand:
[[madness.jpg]]
Left hand:
Solder the MCP like so:
[[left-hand-mcp-1.jpg]]
[[left-hand-mcp-2.jpg]]
[[left-hand-pcb-pyralux.png]]
Solder the Teensy 2.0 like so:
[[teensy-1.jpg]]
Right hand:
Some interesting pull up 10k resistor business here... (TODO add a small
diagram and notes)
[[right-hand-pcb-pyralux.png]]
[[teensy-2-fuxor-reziztorrs.jpg]]
When you're done etching, you'll need to carefully cut the pcb into pieces... See the images
below.
Each hand of the keyboard will wire up like so:
[[right-hand-pcb-1.jpg]]
*** Applying the PCB to the electronical parts
The thumb cluster pcb for the left hand:
Teensy goes here... note the rows soldered to the teensy via the
Pyralux:
[[right-hand-pcb-with-teensy.jpg]]
[[madness.jpg]]
Here the left hand:
[[hotglue-left-hand.jpg]]
Solder the MCP like so:
That's all for now, this guide will improve over time! (TODO!)
[[left-hand-mcp-1.jpg]]
[[left-hand-mcp-2.jpg]]
Solder the Teensy 2.0 like so:
[[teensy-1.jpg]]
Some interesting pull up 10k resistor business here... (TODO add a small diagram and notes)
[[teensy-2-fuxor-reziztorrs.jpg]]
Each hand of the keyboard will wire up like so:
[[right-hand-pcb-1.jpg]]
Teensy goes here... note the rows soldered to the teensy via the Pyralux:
[[right-hand-pcb-with-teensy.jpg]]
Here the left hand:
[[hotglue-left-hand.jpg]]
That's all for now, this guide will improve over time! (TODO!)
** Route 2: Dactyl Hand-Wiring Guide

Binary file not shown.

After

Width:  |  Height:  |  Size: 99 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 90 KiB