c2-utopia/lib/Adafruit NeoPixel/esp8266.c

87 lines
2.4 KiB
C

// This is a mash-up of the Due show() code + insights from Michael Miller's
// ESP8266 work for the NeoPixelBus library: github.com/Makuna/NeoPixelBus
// Needs to be a separate .c file to enforce ICACHE_RAM_ATTR execution.
#if defined(ESP8266)
#include <Arduino.h>
#ifdef ESP8266
#include <eagle_soc.h>
#endif
static uint32_t _getCycleCount(void) __attribute__((always_inline));
static inline uint32_t _getCycleCount(void) {
uint32_t ccount;
__asm__ __volatile__("rsr %0,ccount":"=a" (ccount));
return ccount;
}
#ifdef ESP8266
IRAM_ATTR void espShow(
uint8_t pin, uint8_t *pixels, uint32_t numBytes, __attribute__((unused)) boolean is800KHz) {
#else
void espShow(
uint8_t pin, uint8_t *pixels, uint32_t numBytes, boolean is800KHz) {
#endif
#define CYCLES_800_T0H (F_CPU / 2500001) // 0.4us
#define CYCLES_800_T1H (F_CPU / 1250001) // 0.8us
#define CYCLES_800 (F_CPU / 800001) // 1.25us per bit
#define CYCLES_400_T0H (F_CPU / 2000000) // 0.5uS
#define CYCLES_400_T1H (F_CPU / 833333) // 1.2us
#define CYCLES_400 (F_CPU / 400000) // 2.5us per bit
uint8_t *p, *end, pix, mask;
uint32_t t, time0, time1, period, c, startTime;
#ifdef ESP8266
uint32_t pinMask;
pinMask = _BV(pin);
#endif
p = pixels;
end = p + numBytes;
pix = *p++;
mask = 0x80;
startTime = 0;
#ifdef NEO_KHZ400
if(is800KHz) {
#endif
time0 = CYCLES_800_T0H;
time1 = CYCLES_800_T1H;
period = CYCLES_800;
#ifdef NEO_KHZ400
} else { // 400 KHz bitstream
time0 = CYCLES_400_T0H;
time1 = CYCLES_400_T1H;
period = CYCLES_400;
}
#endif
for(t = time0;; t = time0) {
if(pix & mask) t = time1; // Bit high duration
while(((c = _getCycleCount()) - startTime) < period); // Wait for bit start
#ifdef ESP8266
GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, pinMask); // Set high
#else
gpio_set_level(pin, HIGH);
#endif
startTime = c; // Save start time
while(((c = _getCycleCount()) - startTime) < t); // Wait high duration
#ifdef ESP8266
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, pinMask); // Set low
#else
gpio_set_level(pin, LOW);
#endif
if(!(mask >>= 1)) { // Next bit/byte
if(p >= end) break;
pix = *p++;
mask = 0x80;
}
}
while((_getCycleCount() - startTime) < period); // Wait for last bit
}
#endif // ESP8266