312 lines
7.6 KiB
C++
312 lines
7.6 KiB
C++
|
|
#include <OSCBundle.h>
|
|
#include <OSCBoards.h>
|
|
#include "Adafruit_FreeTouch.h"
|
|
#include <SLIPEncodedSerial.h>
|
|
|
|
Adafruit_FreeTouch qt_0 = Adafruit_FreeTouch(A0, OVERSAMPLE_4, RESISTOR_50K, FREQ_MODE_NONE);
|
|
Adafruit_FreeTouch qt_1 = Adafruit_FreeTouch(A1, OVERSAMPLE_4, RESISTOR_50K, FREQ_MODE_NONE);
|
|
Adafruit_FreeTouch qt_2 = Adafruit_FreeTouch(A2, OVERSAMPLE_4, RESISTOR_50K, FREQ_MODE_NONE);
|
|
Adafruit_FreeTouch *p[3] = { &qt_0, &qt_1, &qt_2 };
|
|
|
|
#undef NUM_DIGITAL_PINS
|
|
#define NUM_DIGITAL_PINS 3
|
|
#undef NUM_ANALOG_PINS
|
|
#define NUM_ANALOG_PINS 3
|
|
|
|
SLIPEncodedUSBSerial SLIPSerial( Serial );
|
|
|
|
|
|
|
|
//outgoing messages
|
|
|
|
OSCBundle bundleOUT;
|
|
|
|
//converts the pin to an osc address
|
|
char * numToOSCAddress( int pin){
|
|
static char s[10];
|
|
int i = 9;
|
|
|
|
s[i--]= '\0';
|
|
do
|
|
{
|
|
s[i] = "0123456789"[pin % 10];
|
|
--i;
|
|
pin /= 10;
|
|
}
|
|
while(pin && i);
|
|
s[i] = '/';
|
|
return &s[i];
|
|
}
|
|
|
|
/**
|
|
* ROUTES
|
|
*
|
|
* these are where the routing functions go
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* DIGITAL
|
|
*
|
|
* called when address matched "/d"
|
|
* expected format:
|
|
* /d/(pin)
|
|
* /u = digitalRead with pullup
|
|
* (no value) = digitalRead without pullup
|
|
* (value) = digital write on that pin
|
|
*
|
|
*/
|
|
|
|
void routeDigital(OSCMessage &msg, int addrOffset ){
|
|
//match input or output
|
|
for(byte pin = 0; pin < NUM_DIGITAL_PINS; pin++){
|
|
//match against the pin number strings
|
|
int pinMatched = msg.match(numToOSCAddress(pin), addrOffset);
|
|
if(pinMatched){
|
|
//if it has an int, then it's a digital write
|
|
if (msg.isInt(0)){
|
|
pinMode(pin, OUTPUT);
|
|
digitalWrite(pin, (msg.getInt(0)>0) ? HIGH:LOW);
|
|
}
|
|
else if(msg.isFloat(0)){
|
|
analogWrite(pin, (int)(msg.getFloat(0)*255.0f));
|
|
}
|
|
|
|
//otherwise it's an digital read
|
|
//with a pullup?
|
|
else if (msg.fullMatch("/u", pinMatched+addrOffset)){
|
|
//set the pullup
|
|
pinMode(pin, INPUT_PULLUP);
|
|
//setup the output address which should be /d/(pin)/u
|
|
char outputAddress[9];
|
|
strcpy(outputAddress, "/d");
|
|
strcat(outputAddress, numToOSCAddress(pin));
|
|
strcat(outputAddress,"/u");
|
|
//do the digital read and send the results
|
|
bundleOUT.add(outputAddress).add(digitalRead(pin));
|
|
} //else without a pullup
|
|
else {
|
|
//set the pinmode
|
|
pinMode(pin, INPUT);
|
|
//setup the output address which should be /d/(pin)
|
|
char outputAddress[6];
|
|
strcpy(outputAddress, "/d");
|
|
strcat(outputAddress, numToOSCAddress(pin));
|
|
//do the digital read and send the results
|
|
bundleOUT.add(outputAddress).add(digitalRead(pin));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ANALOG
|
|
*
|
|
* called when the address matches "/a"
|
|
*
|
|
* format:
|
|
* /a/(pin)
|
|
* /u = analogRead with pullup
|
|
* (no value) = analogRead without pullup
|
|
* (digital value) = digital write on that pin
|
|
* (float value) = analogWrite on that pin
|
|
*
|
|
**/
|
|
|
|
void routeAnalog(OSCMessage &msg, int addrOffset ){
|
|
//iterate through all the analog pins
|
|
for(byte pin = 0; pin < NUM_ANALOG_INPUTS; pin++){
|
|
//match against the pin number strings
|
|
int pinMatched = msg.match(numToOSCAddress(pin), addrOffset);
|
|
if(pinMatched){
|
|
//if it has an int, then it's a digital write
|
|
if (msg.isInt(0)){
|
|
pinMode(analogInputToDigitalPin(pin), OUTPUT);
|
|
digitalWrite(analogInputToDigitalPin(pin), (msg.getInt(0) > 0)? HIGH: LOW);
|
|
}
|
|
else if(msg.isFloat(0)){
|
|
analogWrite(pin, (int)(msg.getFloat(0)*255.0f));
|
|
}
|
|
#ifdef BOARD_HAS_ANALOG_PULLUP
|
|
//with a pullup?
|
|
else if (msg.fullMatch("/u", pinMatched+addrOffset)){
|
|
//set the pullup
|
|
|
|
pinMode(analogInputToDigitalPin(pin), INPUT_PULLUP);
|
|
|
|
//setup the output address which should be /a/(pin)/u
|
|
char outputAddress[9];
|
|
strcpy(outputAddress, "/a");
|
|
strcat(outputAddress, numToOSCAddress(pin));
|
|
strcat(outputAddress,"/u");
|
|
//do the analog read and send the results
|
|
bundleOUT.add(outputAddress).add((int32_t)analogRead(pin));
|
|
} //else without a pullup
|
|
#endif
|
|
|
|
else {
|
|
//otherwise it's an analog read
|
|
//set the pinmode
|
|
|
|
pinMode(analogInputToDigitalPin(pin), INPUT);
|
|
//setup the output address which should be /a/(pin)
|
|
char outputAddress[6];
|
|
strcpy(outputAddress, "/a");
|
|
strcat(outputAddress, numToOSCAddress(pin));
|
|
//do the analog read and send the results
|
|
bundleOUT.add(outputAddress).add((int32_t)analogRead(pin));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
#if 1
|
|
/**
|
|
* TONE
|
|
*
|
|
* square wave output "/tone"
|
|
*
|
|
* format:
|
|
* /tone/pin
|
|
*
|
|
* (digital value) (float value) = frequency in Hz
|
|
* (no value) disable tone
|
|
*
|
|
**/
|
|
|
|
void routeTone(OSCMessage &msg, int addrOffset ){
|
|
//iterate through all the analog pins
|
|
for(byte pin = 0; pin < NUM_DIGITAL_PINS; pin++){
|
|
//match against the pin number strings
|
|
int pinMatched = msg.match(numToOSCAddress(pin), addrOffset);
|
|
if(pinMatched){
|
|
unsigned int frequency = 0;
|
|
//if it has an int, then it's an integers frequency in Hz
|
|
if (msg.isInt(0)){
|
|
frequency = msg.getInt(0);
|
|
} //otherwise it's a floating point frequency in Hz
|
|
else if(msg.isFloat(0)){
|
|
frequency = msg.getFloat(0);
|
|
}
|
|
else
|
|
noTone(pin);
|
|
if(frequency>0)
|
|
{
|
|
if(msg.isInt(1))
|
|
tone(pin, frequency, msg.getInt(1));
|
|
else
|
|
tone(pin, frequency);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
|
|
void routeTouch(OSCMessage &msg, int addrOffset )
|
|
{
|
|
for(int i=0;i<3;++i)
|
|
{
|
|
const char *name = numToOSCAddress(i);
|
|
int pinMatched = msg.match(name, addrOffset);
|
|
if(pinMatched && p[i])
|
|
{
|
|
|
|
char outputAddress[9];
|
|
strcpy(outputAddress, "/c");
|
|
strcat(outputAddress, name);
|
|
bundleOUT.add(outputAddress).add(p[i]->measure());
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* SYSTEM MESSAGES
|
|
*
|
|
* expected format:
|
|
* /s
|
|
* /m = microseconds
|
|
* /d = number of digital pins
|
|
* /a = number of analog pins
|
|
* /l integer = set the led
|
|
* /t = temperature
|
|
* /s = power supply voltage
|
|
*/
|
|
//
|
|
void routeSystem(OSCMessage &msg, int addrOffset ){
|
|
|
|
if (msg.fullMatch("/m", addrOffset)){
|
|
bundleOUT.add("/s/m").add((int32_t)micros());
|
|
}
|
|
if (msg.fullMatch("/d", addrOffset)){
|
|
bundleOUT.add("/s/d").add(NUM_DIGITAL_PINS);
|
|
}
|
|
if (msg.fullMatch("/a", addrOffset)){
|
|
bundleOUT.add("/s/a").add(NUM_ANALOG_INPUTS);
|
|
}
|
|
if (msg.fullMatch("/l", addrOffset)){
|
|
if (msg.isInt(0)){
|
|
pinMode(LED_BUILTIN, OUTPUT);
|
|
int i = msg.getInt(0);
|
|
pinMode(LED_BUILTIN, OUTPUT);
|
|
digitalWrite(LED_BUILTIN, (i > 0)? HIGH: LOW);
|
|
bundleOUT.add("/s/l").add(i);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* MAIN METHODS
|
|
*
|
|
* setup and loop, bundle receiving/sending, initial routing
|
|
*/
|
|
|
|
|
|
void setup() {
|
|
SLIPSerial.begin(115200); // set this as high as you can reliably run on your platform
|
|
for(int i=0; i<3; ++i)
|
|
if(!p[i]->begin())
|
|
p[i] =0;
|
|
}
|
|
|
|
//reads and routes the incoming messages
|
|
void loop(){
|
|
OSCBundle bundleIN;
|
|
int size;
|
|
|
|
while(!SLIPSerial.endofPacket())
|
|
if ((size =SLIPSerial.available()) > 0)
|
|
{
|
|
while(size--)
|
|
bundleIN.fill(SLIPSerial.read());
|
|
}
|
|
|
|
if(!bundleIN.hasError())
|
|
{
|
|
bundleIN.route("/s", routeSystem);
|
|
bundleIN.route("/a", routeAnalog);
|
|
bundleIN.route("/d", routeDigital);
|
|
bundleIN.route("/tone", routeTone);
|
|
bundleIN.route("/c", routeTouch);
|
|
}
|
|
bundleIN.empty();
|
|
|
|
|
|
//send the outgoing message
|
|
SLIPSerial.beginPacket();
|
|
bundleOUT.send(SLIPSerial);
|
|
SLIPSerial.endPacket();
|
|
bundleOUT.empty();
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|