History

Xelus22 b73a29aaea [Bug] Develop - Change uint32_t to layer_state_t (#13596 ) * fix sat75 * update uint32_t to layer_state		2021-07-19 09:50:55 -07:00
..
keymaps	[Bug] Develop - Change uint32_t to layer_state_t (#13596 )	2021-07-19 09:50:55 -07:00
config.h	Ergodone via support (#11618 )	2021-04-16 16:26:19 +02:00
ergodone.c	…
ergodone.h	Fix the typo in ergodone 80 layout (#12075 )	2021-03-02 14:09:35 +11:00
expander.c	…
expander.h	…
i2cmaster.h	…
info.json	…
matrix.c	Remove legacy print backward compatiblitly (#11805 )	2021-02-06 16:56:13 +00:00
readme.md	…
rules.mk	Change `BOOTMAGIC_ENABLE=yes` to use Bootmagic Lite (#12172 )	2021-04-12 21:18:52 +02:00
twimaster.c	…

readme.md

ErgoDone

The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy.

Keyboard maintainer: Yu He
Hardware supported:
- ErgoDone v1.3 (tested)
Hardware availability:
- AliExpress
- KBDfans

Building the firmware

Install the build tools.

In the root directory of the repository, build the firmware with a command like:

make ergodone:default

For more information on the layout option and other ones, see the make guide.

Flashing the firmware onto the keyboard

The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox.

To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard.
To flash the .hex file, use the hid_bootloader_cli utlity from the TKG Toolkit (as of 2017-10-03, only this old version works under Windows):
```
hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex
```