andrejl
/
qmk-dactyl-manuform-a
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
qmk-dactyl-manuform-a/keyboards/lattice60
History
Ryan 5af1799735
Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 		2021-09-12 15:27:29 +10:00
..
keymaps [Keyboard] Lattice60 (#8603) 2020-04-03 13:37:31 -07:00
config.h Remove `DESCRIPTION`, K-M (#11619) 2021-01-20 09:56:41 +11:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
lattice60.c [Keyboard] Lattice60 (#8603) 2020-04-03 13:37:31 -07:00
lattice60.h [Keyboard] Lattice60 (#8603) 2020-04-03 13:37:31 -07:00
readme.md [Keyboard] Lattice60 (#8603) 2020-04-03 13:37:31 -07:00
rules.mk Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2021-09-12 15:27:29 +10:00

readme.md

lattice60

lattice60

A HHKB layout keyboard using only through-hole components.

  • Keyboard Maintainer: emdarcher
  • Hardware Supported: LATTICE60 PCB
  • Hardware Availability: KeyHive

Make example for this keyboard (after setting up your build environment):

make lattice60:default

To activate the USBasploader bootloader, hold the BOOT button down during power on or reset. LED2 should light up to indicate that the bootloader is active.

Flash the firmware using the make command with the flash parameter, example below:

make lattice60:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.