andrejl
/
qmk-dactyl-manuform-a
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
qmk-dactyl-manuform-a/keyboards/xd002
History
Joel Challis f7324ec684
Add xd002 support (#8598) 
* Add xd002 support

* tidy some whitespace

* align filename

* Update keyboards/xd002/info.json

Co-authored-by: Erovia <Erovia@users.noreply.github.com>

Co-authored-by: Erovia <Erovia@users.noreply.github.com>
 		2020-05-01 17:59:22 +01:00
..
keymaps Add xd002 support (#8598) 2020-05-01 17:59:22 +01:00
config.h Add xd002 support (#8598) 2020-05-01 17:59:22 +01:00
info.json Add xd002 support (#8598) 2020-05-01 17:59:22 +01:00
readme.md Add xd002 support (#8598) 2020-05-01 17:59:22 +01:00
rules.mk Add xd002 support (#8598) 2020-05-01 17:59:22 +01:00
xd002.c Add xd002 support (#8598) 2020-05-01 17:59:22 +01:00
xd002.h Add xd002 support (#8598) 2020-05-01 17:59:22 +01:00

readme.md

xd002

xd002

2% Custom mechanical keyboard. ATtiny85 powered, with 2*WS2812 LEDs, and the micronucleus bootloader.

Note: Due to limited firmware space, a lot of features have to be disabled to get a functioning QMK based keyboard.

  • Keyboard Maintainer: zvecr
  • Hardware Supported: xd002
  • Hardware Availability: kprepublic

Make example for this keyboard (after setting up your build environment):

make xd002:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Flashing

Prerequisites

git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline/
sudo make install

On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place these files in /etc/udev/rules.d/. Once added run the following:

sudo udevadm control --reload-rules
sudo udevadm trigger

Instructions

Reset Key: Hold down key nearest to the USB socket while plugging in the keyboard.

make xd002:default:flash

# or directly with...
micronucleus --run <firmware.hex>

Recovery