qmk-dactyl-manuform-a/keyboards/ergodox_ez
Drashna Jaelre 780ff68674 Create info.json for Ergodox EZ (#2572)
* Create info.json for Ergodox EZ

* Add Orthodox info.json too
2018-03-20 23:00:47 -04:00
..
keymaps Add Pretty Keymaps to Ergodox EZ 2018-03-20 20:23:08 -04:00
util Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
190hotfix.sh Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
config.h Merge pull request #2047 from seebs/seebs/ergodox_brightness 2017-11-27 08:25:24 -05:00
ergodox_ez.c Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
ergodox_ez.h Add Pretty Keymaps to Ergodox EZ 2018-03-20 20:23:08 -04:00
i2cmaster.h Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
info.json Create info.json for Ergodox EZ (#2572) 2018-03-20 23:00:47 -04:00
matrix.c Don't "unselect" left-hand rows 2017-12-10 00:40:41 -05:00
readme.md Allow multiple process_record() calls per scan 2017-11-21 00:20:52 -05:00
rules.mk Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
twimaster.c Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make keymapname, for example make default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

  • Click the button in the Teensy app to download the firmware.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.