qmk-dactyl-manuform-a/keyboards/facew
Joel Yauk eb48e5ebdb [Keyboard] Add ISO backslash key position to facew matrix and keymap files (#5190)
* Add ISO backslash key position to matrix and keymap files

* Use KC_NO instead of KC_BSLS for unused position in custom keymap

* Add new key position to json layout file used by online configurator
2019-03-10 20:09:56 -07:00
..
keymaps [Keyboard] Add ISO backslash key position to facew matrix and keymap files (#5190) 2019-03-10 20:09:56 -07:00
config.h
facew.c
facew.h [Keyboard] Add ISO backslash key position to facew matrix and keymap files (#5190) 2019-03-10 20:09:56 -07:00
i2c.c
i2c.h
info.json [Keyboard] Add ISO backslash key position to facew matrix and keymap files (#5190) 2019-03-10 20:09:56 -07:00
matrix.c
readme.md
rules.mk
usbconfig.h

readme.md

FaceW

A 60% no frills keyboard.

The FaceW is a special run of the WKL B.Face sourced from Sprit that doesn't have underglow RGB LEDs but does have in switch LEDs. Also unlike the B.Face, it is based on ps2avru instead of ps2avrGB. It is designed and manufactured in Korea. It originally uses BootMapperClient for programming but can now also use QMK.

Keyboard Maintainer: MechMerlin
Hardware Supported: FaceW Sprit Edition PCB
Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1352

Keyboard Notes

  • The FaceW Sprit Edition can be purchased on mechanicalkeyboards.com
  • Uses ps2avru instead of ps2avrgb
  • To put in reset mode hold q while inserting the USB cable

Make example for this keyboard (after setting up your build environment):

make facew:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python
    brew install pyusb
    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See build environment setup then the make instructions for more information.