qmk-dactyl-manuform-a/keyboards/handwired/splittest/teensy_2
Nick Brassel 2271da00bc
Move splittest I2C (#8346)
2020-03-09 15:36:40 +11:00
..
config.h Move splittest I2C (#8346) 2020-03-09 15:36:40 +11:00
readme.md
rules.mk Cleanup rules.mk for 32U4 keyboards, H (#7030) 2019-10-20 12:51:37 -07:00

readme.md

Teensy 2.0 splittest

To trigger keypress, short together pins F5 and F7

Wiring

  • Add switches to both Teensy 2s across F5 and F7 pins
  • Add pull-up resistor to left side between VCC and F0
  • Add pull-down resistors to right side between GND and F0
  • Connect the following pins on both sides together: D0, D1, GND, VCC
  • Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
  • Wire Di of RGB strip for each half to D3