qmk-dactyl-manuform-a/keyboards/handwired/dactyl
Konstantin Đorđević 4d9b11af14 Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955)
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4

* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions

* Update docs to use get_mods() instead of keyboard_report->mods

* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test

For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist

* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
2019-01-27 00:28:40 -08:00
..
keymaps Handwired/Dactyl refactor and Configurator support (#3222) 2018-06-22 17:24:52 -07:00
config.h Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955) 2019-01-27 00:28:40 -08:00
dactyl.c Bring dactyl/matrix.c in line with quantum/matrix.c (#2613) 2018-04-27 14:47:41 -04:00
dactyl.h Handwired/Dactyl refactor and Configurator support (#3222) 2018-06-22 17:24:52 -07:00
i2cmaster.h Handwired/Dactyl keyboard (#2058) 2017-11-26 02:18:59 -05:00
info.json Handwired/Dactyl refactor and Configurator support (#3222) 2018-06-22 17:24:52 -07:00
matrix.c Keyboard: Dactyl - Only initialize relevant variables (#3771) 2018-08-28 17:06:51 -07:00
readme.md Fix build instructions in the Dactyl readme 2017-11-26 17:56:16 -05:00
rules.mk Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
twimaster.c Handwired/Dactyl keyboard (#2058) 2017-11-26 02:18:59 -05:00

readme.md

Dactyl

See https://github.com/adereth/dactyl-keyboard

The Dactyl uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make handwired/dactyl:<keymapname>, for example make handwired/dactyl:default

  • This will result in a hex file called handwired_dactyl_<keymapname>.hex, e.g. handwired_dactyl_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Put the Teensy in firmware-loading mode:

    • If your current layout has a RESET key, press it.
    • If you lack a RESET key, press the reset button on the Teensy board itself.
  • Click the button in the Teensy app to download the firmware.

To flash with ´teensy-loader-cli´:

  • Build the firmware as above

  • Run <path/to/>teensy_loader_cli -mmcu=atmega32u4 -w handwired_dactyl_<keymapname>.hex

  • If you like, you can do both at once: make handwired/dactyl:<keymapname>:teensy

  • Put the Teensy in firmware-loading mode:

    • If your current layout has a RESET key, press it.
    • If you lack a RESET key, press the reset button on the Teensy board itself.