qmk-dactyl-manuform-a/lib/lufa/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt

61 lines
1.6 KiB
Plaintext

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage MIDI Host Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Audio Class Device</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>MIDI Subclass</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF USB MIDI Audio Class Standard</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note
* on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to
* the attached MIDI device, with the board HWB controlling the note channel.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/