qmk-dactyl-manuform-a/keyboards/handwired/dactyl
Joe Wasson 743449472e Make `PREVENT_STUCK_MODIFIERS` the default (#3107)
* Remove chording as it is not documented, not used, and needs work.

* Make Leader Key an optional feature.

* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`

* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-09-17 13:48:02 -04:00
..
keymaps Handwired/Dactyl refactor and Configurator support (#3222) 2018-06-22 17:24:52 -07:00
config.h Make `PREVENT_STUCK_MODIFIERS` the default (#3107) 2018-09-17 13:48:02 -04:00
dactyl.c Bring dactyl/matrix.c in line with quantum/matrix.c (#2613) 2018-04-27 14:47:41 -04:00
dactyl.h Handwired/Dactyl refactor and Configurator support (#3222) 2018-06-22 17:24:52 -07:00
i2cmaster.h
info.json Handwired/Dactyl refactor and Configurator support (#3222) 2018-06-22 17:24:52 -07:00
matrix.c Keyboard: Dactyl - Only initialize relevant variables (#3771) 2018-08-28 17:06:51 -07:00
readme.md
rules.mk Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
twimaster.c

readme.md

Dactyl

See https://github.com/adereth/dactyl-keyboard

The Dactyl uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make handwired/dactyl:<keymapname>, for example make handwired/dactyl:default

  • This will result in a hex file called handwired_dactyl_<keymapname>.hex, e.g. handwired_dactyl_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Put the Teensy in firmware-loading mode:

    • If your current layout has a RESET key, press it.
    • If you lack a RESET key, press the reset button on the Teensy board itself.
  • Click the button in the Teensy app to download the firmware.

To flash with ´teensy-loader-cli´:

  • Build the firmware as above

  • Run <path/to/>teensy_loader_cli -mmcu=atmega32u4 -w handwired_dactyl_<keymapname>.hex

  • If you like, you can do both at once: make handwired/dactyl:<keymapname>:teensy

  • Put the Teensy in firmware-loading mode:

    • If your current layout has a RESET key, press it.
    • If you lack a RESET key, press the reset button on the Teensy board itself.