qmk-dactyl-manuform-a/keyboards/handwired/fc200rt_qmk
Ryan 62f304a225
Remove `DESCRIPTION`, H-J (#11616)
2021-01-20 00:38:12 +11:00
..
keymaps/default
config.h Remove `DESCRIPTION`, H-J (#11616) 2021-01-20 00:38:12 +11:00
fc200rt_qmk.c
fc200rt_qmk.h
info.json
readme.md
rules.mk

readme.md

fc200rt_qmk

fc200rt_qmk fc200rt_qmk A Leopold FC200RT rewired with Teensy 2.0

Uses original row and column matrix, so you can wire the teensy 2.0 to the corrosposnding column and row numbers and flash this firmware to the teensy.

Pinout of Leopold's matrix:

c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 c10 c11 c12 c13 c14 c15
r0 PAUS Q W E R U I O P SLCK
r1 LGUI TAB CAPS F3 T Y RBRC F7 LBRC BSPC LSFT
r2 A D F J K L SCLN RGUI BSLS RSFT
r3 ESC X F4 G H F6 QUOT LALT F11 SPC UP
r4 Z C V M COMM DOT ENT
r5 B N APP SLSH RALT F12 DOWN RGHT LEFT
r6 LCTL GRV F1 F2 5 6 EQL F8 MINS F9 DEL INS PGUP HOME
r7 F5 1 2 3 4 7 8 9 0 PSCR F10 PGDN END

Choose any key from the corrosponding row and column and solder it to the pin on the Teensy listed in the firmware config.h

NOTE: Some of the keys had mislabled columns and rows, so make sure the columns are all connected without diodes to one another, and that the rows are soldered after the diode

  • Keyboard Maintainer: NaCly
  • Hardware Supported: The PCBs, controllers supported
  • Hardware Availability: Leopold FC200RT + Teensy 2.0

Make example for this keyboard (after setting up your build environment):

make handwired/fc200rt_qmk:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.