qmk-dactyl-manuform-a/keyboards/ergodox_ez
James Churchill 37932c293c Next set of split_common changes (#4974)
* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment
2019-03-12 10:23:28 -07:00
..
keymaps [Keymap] use steno mode from base (#5220) 2019-02-28 12:33:02 -08:00
util Remove empty fn_actions[] 2019-01-11 18:32:43 -08:00
190hotfix.sh
config.h Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955) 2019-01-27 00:28:40 -08:00
ergodox_ez.c Next set of split_common changes (#4974) 2019-03-12 10:23:28 -07:00
ergodox_ez.h
info.json
matrix.c Next set of split_common changes (#4974) 2019-03-12 10:23:28 -07:00
readme.md
rules.mk Fix i2c_master.d listed more than once warning 2018-11-18 08:57:51 -08:00

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.